Carriers for hydrophobic drug molecules: lipid-coated hollow mesoporous silica particles, and the influence of shape and size on encapsulation efficiency.

Hydrophobic drugs, while designed to interact with specific receptors or enzymes located in lipid-rich cell membranes, often face challenges of limited bioavailability and insufficient circulation time due to their insolubility in aqueous environments. One plausible pathway to increase their blood circulation time is to load these drugs into biocompatible and hydrophilic carriers to enhance their uptake. In this study, mesoporous silica (mSiO2) nanocarriers of various morphologies (including cubes, capsules, and spheres) were synthesized. These nanocarriers were then surface-functionalized with alkyl chain hydrocarbons, specifically octadecyl-trimethoxysilane, (OCH3)3Si(CH2)17CH3, to render them hydrophobic. The resulting nanocarriers (((OCH3)3Si(CH2)17CH3)@mSiO2) showed up to 80% uptake for hydrophobic drugs. However, a significant drawback was observed as most of the drugs were prone to uncontrollable release within 6 h. This challenge of premature drug release was successfully mitigated by effectively sealing the drug-loaded nanocarriers with a pH-sensitive lipid overlayer. The lipid-coated nanocarriers prolonged drug containment and sustained release up to 72 h, compared to 6 h for uncoated nanocarriers, thereby facilitating longer blood circulation times. Moreover, the shape and size of nanocarriers were found to influence both drug entrapment capacity and release behavior with cubic forms exhibiting superior loading capacity due to higher surface area and porosity. Additionally, it was observed that the molecular weight and chemical structure of the drug molecules played a crucial role in determining their uptake and release profiles. Furthermore, the influence of different morphologies of nanocarriers on cell uptake and cytotoxicity in immune cells was elucidated. These findings underscore the importance of nanocarrier morphology and drug properties to enhance loading capacities and controlled release profiles, for designing drug delivery systems tailored for hydrophobic drugs.

Synthesis and theoretical study of a mixed-ligand indium(III) complex for fabrication of ß-In2S3 thin films via chemical vapor deposition.

Two new heteroleptic indium aminothiolate compounds [InClSC2H4N(Me)SC2H4]3[1] and [InSC2H4N(Me)SC2H4(C8H5F3NO)] [2] were synthesized by in situ salt metathesis reaction involving indium trichloride, aminothiol, and N,O-ß-heteroarylalkenol ligands. The complexes were subsequently purified and thoroughly characterized by nuclear magnetic resonance (NMR) analysis, elemental studies, mass spectroscopy, and X-ray diffraction single crystal analysis that showed a trigonal bipyramidal coordination of In(III) in both complexes. Thermogravimetric analysis of [1] revealed a multistep decomposition pathway and the formation of In2S3 at 350 °C, which differed from the pattern of [2] due to the lower thermal stability of [1]. Compound [2] exhibited a three-step decomposition process, resulting in the formation of In2S3 at 300 °C. The Chemical Vapor Deposition (CVD) experiment involving compound [2] was conducted on the FTO substrate, resulting in the production of singular-phase In2S3 deposits. A comprehensive characterization of these deposits, including crystal structure analysis via X-ray diffraction (XRD), and surface topography examination through scanning electron microscopy (SEM) has been completed. The presence of In-S units was also supported by the Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and energy dispersive spectroscopy (EDS) of the as-deposited films. Moreover, the electronic structure and thermal properties of compound [2] were investigated through DFT calculations. Electron density localization analysis revealed that the highest occupied molecular orbital (HOMO) exhibited dense concentration at the aminothiolate moiety of the complex, while the lowest unoccupied molecular orbital (LUMO) predominantly resided at the N,O-ß-heteroarylalkenolate ligand. Furthermore, our computational investigation has validated the formation of indium sulfide by elucidating an intermediate state, effectively identified through EI-MS analysis, as one of the plausible pathways for obtaining In2S3. This intermediate state comprises the aminothiolate ligand (LNS) coordinated with indium metal.

Designing of a Multifunctional 3D-Printed Biomimetic Theragenerative Aerogel Scaffold via Mussel-Inspired Chemistry: Bioactive Glass Nanofiber-Incorporated Self-Assembled Silk Fibroin with Antibacterial, Antiosteosarcoma, and Osteoinductive Properties.

Biomaterial-mediated bone tissue engineering (BTE) offers an alternative, interesting approach for the restoration of damaged bone tissues in postsurgery osteosarcoma treatment. This study focused on synthesizing innovative composite inks, integrating self-assembled silk fibroin (SF), tannic acids (TA), and electrospun bioactive glass nanofibers 70SiO2-25CaO-5P2O5 (BGNF). By synergistically combining the unique characteristics of these three components through self-assembly and microextrusion-based three-dimensional (3D) printing, our goal was to produce durable and versatile aerogel-based 3D composite scaffolds. These scaffolds were designed to exhibit hierarchical porosity along with antibacterial, antiosteosarcoma, and bone regeneration properties. Taking inspiration from mussel foot protein attachment chemistry involving the coordination of dihydroxyphenylalanine (DOPA) amino acids with ferric ions (Fe3+), we synthesized a tris-complex catecholate-iron self-assembled composite gel. This gel formation occurred through the coordination of oxidized SF (SFO) with TA and polydopamine-modified BGNF (BGNF-PDA). The dynamic nature of the coordination ligand-metal bonds within the self-assembled SFO matrix provided excellent shear-thinning properties, allowing the SFO-TA-BGNF complex gel to be extruded through a nozzle, facilitating 3D printing into scaffolds with outstanding shape fidelity. Moreover, the developed composite aerogels exhibited multifaceted features, including NIR-triggered photothermal antibacterial and in vitro photothermal antiosteosarcoma properties. In vitro studies showcased their excellent biocompatibility and osteogenic features as seeded cells successfully differentiated into osteoblasts, promoting bone regeneration in 21 days. Through comprehensive characterizations and biological validations, our antibacterial scaffold demonstrated promise as an exceptional platform for concurrent bone regeneration and bone cancer therapy, setting the stage for their potential clinical application.

MXene-Integrated Silk Fibroin-Based Self-Assembly-Driven 3D-Printed Theragenerative Scaffolds for Remotely Photothermal Anti-Osteosarcoma Ablation and Bone Regeneration.

Aiming to address the bone regeneration and cancer therapy functionalities in one single material, in this study, we developed a dual-functional theragenerative three-dimensional (3D) aerogel-based composite scaffold from hybridization of photo-cross-linked silk fibroin (SF) biopolymer with MXene (Ti3C2) two-dimensional (2D) nanosheets. To fabricate the scaffold, we first develop a dual-cross-linked SF-based aerogel scaffold through 3D printing and photo-cross-linking of the self-assembly-driven methacrylate-modified SF (SF-MA) gel with controlled pore size, macroscopic geometry, and mechanical stability. In the next step, to endow a remotely controlled photothermal antiosteosarcoma ablation function to fabricated aerogel scaffold, MXene 2D nanosheets with strong near-infrared (NIR) photon absorption properties were integrated into the 3D-printed scaffolds. While 3D-printed MXene-modified dual-cross-linked SF composite scaffolds can mediate the in vitro growth and proliferation of preosteoblastic cell lines, they also endow a strong photothermal effect upon remote irradiation with NIR laser but also significantly stimulate bone mineral deposition on the scaffold surface. Additionally, besides the local release of the anticancer model drug, the generated heat (45-53 °C) mediated the photothermal ablation of cancer cells. The developed aerogel-based composites and chosen therapeutic techniques are thought to render a significant breakthrough in biomaterials' future clinical applications.

Potential and perspectives of halide perovskites in light emitting devices.

Light emitting diodes (LEDs) have become part of numerous electrical and electronic systems such as lighting, displays, status indicator lamps and wearable electronics. Owing to their excellent optoelectronic properties and deposition via simple solution process, metal halide perovskites possess unique potential for developing halide perovskite-based LEDs (PeLEDs) with superior photoluminescence efficiencies leading to external quantum efficiencies beyond 20% for PeLEDS. However, the limited durability, high operative voltages, and challenges of scale-up are persisting barriers in achieving required technology readiness levels. To build up the existing knowledge and raise the device performance this review provides a state-of-the-art study on the properties, film and device fabrication, efficiency, and stability of PeLEDs. In terms of commercialization, PeLEDs need to overcome materials and device challenges including stability, ion migration, phase segregation, and joule heating, which are discussed in this review. We hope, discussions about the strategies to overcome the stability issues and enhancement the materials intrinsic properties towards development more stable and efficient optoelectronic devices can pave the way for scalability and cost-effective production of PeLEDs.

Validation of Dual-Action Chemo-Radio-Labeled Nanocarriers with High Efficacy against Triple-Negative Breast Cancer.

Identification and selectivity of molecular targets with prolonged action for difficult-to-target cancer such as triple-negative breast cancer (TNBC) represent a persisting challenge in the precision delivery of therapeutics. In the quest to target undruggable sites, this study validates the bioavailability of polydopamine-sealed mesoporous silica nanocarriers (PDA-mSiO2) for in vivo drug delivery to TNBC. For controlled transport and release, the chemotherapeutic drug doxorubicin was encapsulated in mSiO2 nanocarriers coated with a PDA layer serving as a stimuli-responsive gatekeeper or seal. For unifying targeting and treatment modalities, these nanocarriers were covalently conjugated to a macrocyclic chelator (DOTA) and folate (FA-mSiO2.) that enabled incorporation of radionuclides and identification of FR Alpha (FolRα) receptors present on TNBC cells. The robust chemical design of FA- and DOTA-functionalized PDA-coated mSiO2 nanocarriers constitutes mild reaction conditions to avoid the loss of surface-bound molecules. The radiolabeling studies with the theranostic pair 68Ga and 177Lu showed quantitative trends for radiochemical efficacy and purity. Nanocarriers equipped with both radiolabels and affinity ligands were optimally stable when incubated with human serum for up to 120 h (177Lu), demonstrating hydrophilicity with a partition coefficient (log P) of -3.29 ± 0.08. Specifically, when incubated with TNBC cells, the cells received significant FA-mSiO2 carriers, demonstrating efficient carrier internalization and time-dependent uptake. Moreover, in vivo results visualize the retention of drug-filled carriers at the tumor sites for a long time, which holds promise for therapeutic studies. This research work demonstrates for the first time the successful dual conjugation of nanocarriers through the colocation of radionuclides and anticancer drugs that is promising for both live molecular imaging and enhanced therapeutic effect for TNBC.

Effect of Structural Changes at Various Length Scales in SiVOC Ceramic Nanocomposites on Electrocatalytic Performance for the Oxygen Reduction Reaction.

Polymer-derived processing of ceramics (PDC) is an efficient technique to prepare porous nanocomposites with precise control over their phase composition and in relation to the Si-based ceramic matrix containing free carbon. The microstructure of these nanocomposites can be fine-tuned at the molecular scale for obtaining necessary properties by tailoring the chemical configuration of the preceramic polymer. In the present work, vanadium-based nanocomposites were synthesized as oxygen reduction reaction (ORR) catalysts with the objective of elucidating the effect of microstructure changes on catalytic efficiency. For this purpose, a single-source precursor (SSP) was synthesized by crosslinking phenyl- and hydrido-substituted polysiloxane and vanadium acetylacetonate followed by pyrolysis at 1100 °C. The resulting solid was composed of sparsely distributed nanodomains of vanadium carbide (VC) crystals precipitated within an amorphous silicon oxycarbide (-Si-O-C-) matrix. High-temperature treatment of the pyrolyzed samples beyond 1300 °C induced the crystallization of ß-SiC as well as VC. Furthermore, Raman spectroscopy confirmed the segregation of sp2-hybridized, turbostratic free carbon. The samples exposed to 1300 °C revealed a specific surface area of 239 m2/g. The electrocatalytic activity of the sample heat-treated at 1300 °C showed the best performance with respect to the ORR performance with onset potential (Eo) and half-wave potential (E1/2) values of 0.81 and 0.72 V, respectively. In addition, improved kinetics with a Tafel slope of 57 mV/dec and enhanced current density in the diffusion-controlled region (Id) of 3.7 mA/cm2 were observed for this sample. The increase in Eo was attributed to the optimal interfacial characteristics between the VC and SiOC matrix with better embedment of VC with free carbon through V-C bonds. The higher E1/2 and faster kinetics are because of the higher electronic conductivity caused by the free carbon effectively connecting metallic VC crystallites. Besides, the higher specific surface area of this sample enhanced Id.

Direct Synthesis of Two-Dimensional SnSe and SnSe2 through Molecular Scale Preorganization.

Two-dimensional tin monoselenide (SnSe) and tin diselenide (SnSe2) materials were efficiently produced by the thermolysis of molecular compounds based on a new class of seleno-ligands. Main group metal chalcogenides are of fundamental interest due to their layered structures, thickness-dependent modulation in electronic structure, and small effective mass, which make them attractive candidates for optoelectronic applications. We demonstrate here the synthesis of stable tin selenide precursors by in situ reductive bond cleavage in the dimeric diselenide ligand (SeC2H4N(Me)C2H4Se)2 in the presence of SnCl4. New molecular precursors [SnIV(SeC2H4N(Me)C2H4Se)2], [SnIVCl2(SeC2H4N(Me)C2H4Se)], and [SnIV(SC2H4N(Me)C2H4S)(SeC2H4N(Me)C2H4Se)] were thoroughly characterized by multinuclear magnetic resonance studies and single-crystal X-ray diffraction analysis that revealed the Sn(IV) center to be octahedrally coordinated by two tridentate dianionic chelating ligands or trigonally pyramidally coordinated by one chelating ligand and two chlorido ligands. Preorganization of metal-selenium bonds in both compounds offered direct and reproducible synthetic access to two-dimensional tin chalcogenides (SnSe and SnSe2) via simple adjustment of the pyrolysis temperature. Additionally, SnSe2 and SnSxSe2-x particles could be successfully synthesized by microwave-assisted decomposition of the molecular precursors, which was unambiguously corroborated by both experimental and computational analyses that explained the formation of a selenium rich SnSxSe2-x phase from a single molecular precursor containing both Sn-Se and Sn-S bonds.

Sub PPM Detection of NO2 Using Strontium Doped Bismuth Ferrite Nanostructures.

The present work investigates the NO2 sensing properties of acceptor-doped ferrite perovskite nanostructures. The Sr-doped BiFeO3 nanostructures were synthesized by a salt precursor-based modified pechini method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The synthesized materials were drop coated to fabricate chemoresistive gas sensors, delivering a maximum sensitivity of 5.2 towards 2 ppm NO2 at 260 °C. The recorded values of response and recovery time are 95 s and 280 s, respectively. The sensor based on Bi0.8Sr0.2FeO3-δ (BSFO) that was operated was shown to have a LOD (limit of detection) as low as 200 ppb. The sensor proved to be promising for repeatability and selectivity measurements, indicating that the Sr doping Bismuth ferrite could be a potentially competitive material for sensing applications. A relevant gas-sensing mechanism is also proposed based on the surface adsorption and reaction behavior of the material.

Undirected C-H Bond Activation in Aluminium Hydrido Enaminonates.

Two new aluminium hydrido complexes were synthesized by reacting AlH3 with the enaminone ligand N-(4,4,4-trifluorobut-1-en-3-on)-6,6,6-trifluoroethylamine (HTFB-TFEA) in different molar ratios to obtain mono- and di-hydrido-aluminium enaminonates. Both air and moisture sensitive compounds could be purified via sublimation under reduced pressure. The spectroscopic analysis and structural motif of the monohydrido compound [H-Al(TFB-TBA)2] (3) showed a monomeric 5-coordinated Al(III) centre bearing two chelating enaminone units and a terminal hydride ligand. However, the dihydrido compound exhibited a rapid C-H bond activation and C-C bond formation in the resulting compound [(Al-TFB-TBA)-HCH2] (4a), which was confirmed by single crystal structural data. The intramolecular hydride shift involving the migration of a hydride ligand from aluminium centre to the alkenyl carbon of the enaminone ligand was probed and verified by multi-nuclear spectral studies (1H,1H NOESY, 13C, 19F, and 27Al NMR).

Fabrication and Characterization of Piezoelectric Polymer Composites and Cytocompatibility with Mesenchymal Stem Cells.

Piezoelectric materials are promising for biomedical applications because they can provide mechanical or electrical stimulations via converse or direct piezoelectric effects. The stimulations have been proven to be beneficial for cell proliferation and tissue regeneration. Recent reports showed that doping different contents of reduced graphene oxide (rGO) or polyaniline (PANi) into biodegradable polyhydroxybutyrate (PHB) enhanced their piezoelectric response, showing potential for biomedical applications. In this study, we aim to determine the correlation between physiochemical properties and the in vitro cell response to the PHB-based composite scaffolds with rGO or PANi. Specifically, we characterized the surface morphology, wetting behavior, electrochemical impedance, and piezoelectric properties of the composites and controls. The addition of rGO and PANi resulted in decreased fiber diameters and hydrophobicity of PHB. The increased surface energy of PHB after doping nanofillers led to a reduced water contact angle (WCA) from 101.84 ± 2.18° (for PHB) to 88.43 ± 0.83° after the addition of 3 wt % PANi, whereas doping 1 wt % rGO decreased the WCA value to 92.56 ± 2.43°. Meanwhile, doping 0.2 wt % rGO into PHB improved the piezoelectric properties compared to the PHB control and other composites. Adding up to 1 wt % rGO or 3 wt % PANi nanofillers in PHB did not affect the adhesion densities of bone marrow-derived mesenchymal stem cells (BMSCs) on the scaffolds. The aspect ratios of attached BMSCs on the composite scaffolds increased compared to the PHB control. The study indicated that the PHB-based composites are promising for potential applications such as regenerative medicine, tissue stimulation, and bio-sensing, which should be further studied.

Influence of alkali metal cations on the formation of the heterobimetallic actinide tert-butoxides [AnM3(OtBu)7] and [AnM2(OtBu)6] (AnIV = Th, U; MI = Li, Na, K, Rb, Cs).

Heterobimetallic tert-butoxides of alkali metal cations with tetravalent actinide centers exhibit two distinctive structural motifs, [AnM2(OtBu)6] and [AnM3(OtBu)7] (AnIV = Th, U and MI = Li, Na, K, Rb, Cs), evidently governed by the size of the alkali metal ions. Both [AnM3(OtBu)7] AnM3 (AnIV = U, MI = Li; AnIV = Th, MI = Li, Na) and [AnM2(OtBu)6] AnM2 (AnIV = U, MI = Na-Cs; AnIV = Th, MI = K-Cs) compounds are obtained in nearly quantitative yields by reacting actinide and alkali metal silyl amides with an excess of tert-butyl alcohol. The AnM3 complexes form a cubane-type coordination motif, whereas the AnM2 complexes display a geometry resembling two face-shared bipyramids. The sodium derivatives of thorium and uranium (ThNa3 and UNa2) allow the determination of the structural transition threshold as a function of the ratio of the ionic radii ri(AnIV)/ri(MI). The AnM3 complexes are formed for ratios above 0.92 and the AnM2 type is formed for ratios below 0.87. All compounds are unambiguously characterized in both solution and solid states by NMR and IR spectroscopic studies and single crystal X-ray diffraction analyses, respectively.

Neptunium Alkoxide Chemistry: Expanding Alkoxides to the Transuranium Elements.

Two oxo-containing neptunium(IV) tert-butoxides, [Np3O(OtBu)10] (1) and [K4Np2O(OtBu)10] (2), were synthesized using the ligand substitution between neptunium(IV) silylamides and HOtBu, whereas the salt metathesis between [NpCl4(DME)2] (DME = dimethoxyethane) and various amounts of LiOtBu resulted in the formation of oxo-free alkoxides [Np(OtBu)4(py)2] (3; py = pyridine) and [Li(THF)]2[Np(OtBu)6] (4; THF = tetrahydrofuran). These complexes are the first structurally characterized neptunium(IV) alkoxides using single-crystal X-ray diffraction and solid-state absorption spectroscopy, which provide data for the development of anhydrous metal-organic neptunium chemistry.

Rational design of bifunctional chimeric peptides that combine antimicrobial and titanium binding activity.

Bacterial biofilm formation remains a serious problem for clinical materials and often leads to implant failure. To counteract bacterial adhesion, which initiates biofilm formation, the development of antibiotic surface coating strategies is of high demand and warrants further investigations. In this study, we have created bifunctional chimeric peptides by fusing the recently developed antimicrobial peptide MGD2 (GLRKRLRKFFNKIKF) with different titanium-binding sequences. The novel peptides were investigated regarding their antibacterial potential against a set of different bacterial strains including drug-resistant Staphylococcus aureus. All peptides showed high antimicrobial activities both when in solution and when immobilized on titanium surfaces. Owing to the ease of synthesis and handling, the herein described peptides might be a true alternative to prevent bacterial biofilm formation.

Cell Behavior Changes and Enzymatic Biodegradation of Hybrid Electrospun Poly(3-hydroxybutyrate)-Based Scaffolds with an Enhanced Piezoresponse after the Addition of Reduced Graphene Oxide.

This is the first comprehensive study of the impact of biodegradation on the structure, surface potential, mechanical and piezoelectric properties of poly(3-hydroxybutyrate) (PHB) scaffolds supplemented with reduced graphene oxide (rGO) as well as cell behavior under static and dynamic mechanical conditions. There is no effect of the rGO addition up to 1.0 wt% on the rate of enzymatic biodegradation of PHB scaffolds for 30 d. The biodegradation of scaffolds leads to the depolymerization of the amorphous phase, resulting in an increase in the degree of crystallinity. Because of more regular dipole order in the crystalline phase, surface potential of all fibers increases after the biodegradation, with a maximum (361 ± 5 mV) after the addition of 1 wt% rGO into PHB as compared to pristine PHB fibers. By contrast, PHB-0.7rGO fibers manifest the strongest effective vertical (0.59 ± 0.03 pm V-1 ) and lateral (1.06 ± 0.02 pm V-1 ) piezoresponse owing to a greater presence of electroactive ß-phase. In vitro assays involving primary human fibroblasts reveal equal biocompatibility and faster cell proliferation on PHB-0.7rGO scaffolds compared to pure PHB and nonpiezoelectric polycaprolactone scaffolds. Thus, the developed biodegradable PHB-rGO scaffolds with enhanced piezoresponse are promising for tissue-engineering applications.

Correction: Click functionalized biocompatible gadolinium oxide core-shell nanocarriers for imaging of breast cancer cells.

[This corrects the article DOI: 10.1039/D2RA00347C.].

Click functionalized biocompatible gadolinium oxide core-shell nanocarriers for imaging of breast cancer cells.

Site-specific delivery using functionalized nanocarriers is in high demand in imaging applications of modern clinical research. To improve the imaging capabilities of conventionally used contrast agents and expand the targeting accuracy, functional gadolinium oxide based nanocarriers originated from homogeneous core shells structures (Gd2O3@SiO2@Fe3O4) were developed using a multilayer formation approach. The synthesis and chemical configuration for the covalent binding of macrocyclic chelating agents and estrogen targeting molecules on these nanocarriers were designed by a two-step chemical synthesis method. Initially, SiO2@Fe3O4 structures were prepared and encapsulated with a homogenous thin Gd2O3 overlayer. The exterior surface of the as-prepared carriers offered chemical binding with a breast cancer specific estrogen molecule, covalently grafted through a Click-Chemistry protocol. In the next step, to enhance the diagnostic imaging capabilities of these carriers, thiocyanate-linked chelator molecule, DOTA, was attached to the surface of estrogen bound Gd2O3@SiO2@Fe3O4 using basic reaction conditions. The active amino groups before and after conjugation of estrogen molecules on the surface were quantified using a fluorescamine based approach. Due to the covalent binding of the macrocyclic chelator to the Gd2O3@SiO2@Fe3O4 surface, core shell carriers showed potential radiolabeling efficiency using positron emitter radionuclide, gallium-68 (68Ga). Intracellular uptake of estrogen-conjugated carriers was evaluated with MCF7 breast cancer cell lines using confocal laser scanning microscopy and fluorescent flow cytometry. In addition, in vitro cytotoxicity studies of functional nanocarriers as compared to bare nanoparticles showed reduced toxicity to HEK-293 cells demonstrating the role of surface attached molecules in preventing direct exposure of the Gd2O3 surface to the cells. The as-developed gadolinium based nanocarriers presented excellent capabilities as biocompatible target-specific imaging probes which indicates great potential in the field of dual-mode contrast agents.

Combating Li metal deposits in all-solid-state battery via the piezoelectric and ferroelectric effects.

All-solid-state Li-metal batteries (ASSLBs) are highly desirable, due to their inherent safety and high energy density; however, the irregular and uncontrolled growth of Li filaments is detrimental to interfacial stability and safety. Herein, we report on the incorporation of piezo-/ferroelectric BaTiO3 (BTO) nanofibers into solid electrolytes and determination of electric-field distribution due to BTO inclusion that effectively regulates the nucleation and growth of Li dendrites. Theoretical simulations predict that the piezoelectric effect of BTO embedded in solid electrolyte reduces the driving force of dendrite growth at high curvatures, while its ferroelectricity reduces the overpotential, which helps to regularize Li deposition and Li+ flux. Polarization reversal of soft solid electrolytes was identified, confirming a regular deposition and morphology alteration of Li. As expected, the ASSLBs operating with LiFePO4/Li and poly(ethylene oxide) (PEO)/garnet solid electrolyte containing 10% BTO additive showed a steady and long cycle life with a reversible capacity of 103.2 mAh g-1 over 500 cycles at 1 C. Furthermore, the comparable cyclability and flexibility of the scalable pouch cells prepared and the successful validation in the sulfide electrolytes, demonstrating its universal and promising application for the integration of Li metal anodes in solid-state batteries.

Thermally-induced drift of A-site cations at solid-solid interface in physically paired lead halide perovskites.

The promise of hybrid organic-inorganic halide perovskite solar cells rests on their exceptional power conversion efficiency routinely exceeding 25% in laboratory scale devices. While the migration of halide ions in perovskite thin films has been extensively investigated, the understanding of cation diffusion remains elusive. In this study, a thermal migration of A­site cations at the solid-solid interface, formed by two physically paired MAPbI3 and FAPbI3 perovskite thin films casted on FTO, is demonstrated through continuous annealing at comparably low temperature (100 °C). Diffusion of methylammonium (CH3NH3+, MA+) cations into the low­symmetry yellow δ­FAPbI3 phase triggers a transition from the yellow (δ) to black (α) phase evident in the distinctive color change and verified by shifts in absorption bands and X­ray diffraction patterns. Intermixing of the A­site cations MA+ and FA+ (CH(NH2)2+) occurred for both systems, α­MAPbI3/δ­FAPbI3 and α­MAPbI3/α­FAPbI3. The structural and compositional changes in both cases support a thermally activated ion drift unambiguously demonstrated through changes in the absorption and X-ray photoelectron spectra. Moreover, the physical contact annealing (PCA) leads to healing of defects and pinholes in α­MAPbI3 thin films, which was correlated to longer recombination lifetimes in mixed MAxFA1-xPbI3 thin films obtained after PCA and probed by ultrafast transient absorption spectroscopy.

Tantalum Oxide as an Efficient Alternative Electron Transporting Layer for Perovskite Solar Cells.

Electron transporting layers facilitating electron extraction and suppressing hole recombination at the cathode are crucial components in any thin-film solar cell geometry, including that of metal-halide perovskite solar cells. Amorphous tantalum oxide (Ta2O5) deposited by spin coating was explored as an electron transport material for perovskite solar cells, achieving power conversion efficiency (PCE) up to ~14%. Ultraviolet photoelectron spectroscopy (UPS) measurements revealed that the extraction of photogenerated electrons is facilitated due to proper alignment of bandgap energies. Steady-state photoluminescence spectroscopy (PL) verified efficient charge transport from perovskite absorber film to thin Ta2O5 layer. Our findings suggest that tantalum oxide as an n-type semiconductor with a calculated carrier density of ~7 × 1018/cm3 in amorphous Ta2O5 films, is a potentially competitive candidate for an electron transport material in perovskite solar cells.