Interpenetrating Polymer Network Capturing FRET-Sensitive Polymers Available for an Enzyme Assay.

Fluorogenic glycomonomers have been used for biological evaluations, and water-soluble and Förster resonance energy transfer (FRET)-sensitive glycopolymers have also been reported. A FRET-sensitive polymer was conveniently prepared from a fluorogenic donor monomer and a fluorogenic acceptor monomer by means of simple radical polymerization in high yield. Continuous fluorospectroscopic monitoring of the polymer in the presence of an enzyme was performed, and the results showed the possible application of the FRET-sensitive glycopolymer for practical use. In addition to the use of aqueous solution phase, the water-soluble and FRET-sensitive glycopolymer was completely captured into an interpenetrating polymer network (IPN) by means of radical polymerization with a combination of acrylamide and bis-acrylamide as used for the cross-linking reagent system. The IPN including the FRET-sensitive glycopolymer was allowed to react with amylases in an aqueous buffer solution at 37 °C, and the enzymatic reaction was continuously and conveniently monitored by means of fluorometric spectroscopy.

Toluene-Poisoning-Resistant High-Entropy Non-Noble Metal Anode for Direct One-Step Hydrogenation of Toluene to Methylcyclohexane.

The direct one-step hydrogenation of toluene to methylcyclohexane facilitated by a proton-exchange membrane water electrolyzer driven by renewable energy has garnered considerable attention for stable hydrogen storage and safe hydrogen transportation. However, a persistent challenge lies in the crossover of toluene from the cathode to the anode chamber, which deteriorates the anode and decreases its energy efficiency and lifetime. To address this challenge, the catalyst-poisoning mechanism is systematically investigated using IrO2 and high-entropic non-noble-metal alloys as anodes in acidic electrolytes saturated with toluene and toluene-oxidized derivatives, such as benzaldehyde, benzyl alcohol, and benzoic acid. Benzoic acid plays an important role in polymer-like carbon-film formation by blocking the catalytically active sites on the anode surface. Moreover, Nb and the highly entropic state on the surface of the multi-element alloy lower the adsorbing ability of toluene and prevent polymer-like carbon film formation. This study contributes to the design of catalyst-poisoning-resistant anodes for organic hydride technology, advanced fuel cells, and batteries.

Synthetic assembly of α-O-linked-type GlcNAc using polymer chemistry affords sugar clusters, which effectively bind to lectins.

Fischer's glycoside synthesis was applied to linker precursor alcohols of two different lengths having appropriate alkane chains to obtain the corresponding α-glycoside and it was found to be applicable with moderate yields. Water-soluble glycomonomers were systematically prepared from N-acetyl-d-glucosamine (GlcNAc) by introducing two kinds of alcohols having different methylene lengths. Typical radical polymerizations of the glycomonomers with acrylamide as a modulator for control of the distance between carbohydrate residues in water in the presence of ammonium persulfate (APS)-N,N,N',N'-tetramethylethylenediamine (TEMED) gave a series of glycopolymers with various α-glycoside-type GlcNAc residue densities. Fluorometric analysis of the interaction of wheat germ agglutinin (WGA) with the glycopolymers was performed and the results showed unique binding specificities based on structural differences.

Preparation of N-Linked-Type GlcNAc Monomers for Glycopolymers and Binding Specificity for Lectin.

Glycomonomers having N-glycosidic linkages were prepared from a known glycosyl amine, N-acetyl-d-glucosamine (GlcNAc). Radical polymerization of the glycomonomers gave a series of glycopolymers displaying various sugar densities, which were models of the core structure of Asn-linked-type glycoproteins. In addition, fluorometric analyses of wheat germ agglutinin (WGA) against the glycopolymers were carried out, and the results showed unique binding specificities on the basis of flexibility of sugar moieties.

Preparation of a Water-Soluble Glycopolymer Bearing Porphyrin Skeletons and Its Biological Properties.

A known tetraphenyl porphyrin (TPP) having an amino functional group [5-(4-aminophenyl)-10,15,20-(triphenyl)porphyrin] was converted into the corresponding monomer by means of condensation with acryloyl chloride. Simple radical polymerization of the porphyrin monomer and a glycosyl monomer in the presence of acrylamide as a regulator monomer in order to avoid steric interference gave a water-soluble glycopolymer bearing porphyrin moieties. Spectroscopic analyses suggested incorporation of porphyrin moieties in the glycopolymer. The physical properties of the water-soluble glycopolymer bearing porphyrin moieties were examined in aqueous media, and the results also indicated the incorporation of TPP moieties in the polymer. Uptake of the polymer into HeLa cells was observed, and the cytotoxicity of the polymer was confirmed by microscopic analyses. The glycopolymer bearing porphyrin moieties is promising not only for photodynamic therapy but also as an anti-cancer reagent.

Proteolytic polymer: polyacrylamides functionalized with amino acids cleave bovine and human serum albumins.

Polyacrylamides with various compositions of serine, aspartic acid, and histidine, which are the amino acids involved in the catalytic triad of natural serine protease chymotrypsin, were synthesized and their protein cleavage activity was investigated. SDS-PAGE analysis showed that some of the synthesized ternary copolymers showed cleavage activity against bovine and human serum albumins. Polyacrylamides incorporating a single type of amino acid were also able to cleave the protein substrates. These homopolymers exhibited unique cleavage profiles and pH and temperature sensitivities that differed from those of α-chymotrypsin. The results indicate the potential of polymers functionalized with amino acids as proteolytic artificial enzymes.

Synthetic assembly of a series of glycopolymers having sialyl α2-3 lactose moieties connected with longer spacer arms.

Glycopolymers having sialyl α2-3 lactose moieties via longer spacer arms were systematically prepared from the corresponding glycomonomers. Radical polymerization of glycomonomers gave a series of glycopolymers displaying various sugar densities. Fluorometric analyses of wheat germ agglutinin (WGA) against the glycopolymers were conducted and the results showed unique binding specificities on the basis of sugar densities.

Use of a Longer Aglycon Moiety Bearing Sialyl α(2→3) Lactoside on the Glycopolymer for Lectin Evaluation.

A polymerizable alcohol having 9 PEG repeats was prepared in order to mimic an oligosaccharide moiety. Sialyl α(2→3) lactose, which is known as a sugar moiety of GM3 ganglioside, was also prepared, and the polymerizable alcohol was condensed with the sialyl α(2→3) lactose derivative to afford the desired glycomonomer, which was further polymerized with or without acrylamide to give water-soluble glycopolymers. The glycopolymers had higher affinities than those of glycopolymers having sialyl lactose moieties with shorter aglycon moieties.

Corrosion-Resistant and High-Entropic Non-Noble-Metal Electrodes for Oxygen Evolution in Acidic Media.

To realize a sustainable hydrogen economy, corrosion-resistant non-noble-metal catalysts are needed to replace noble-metal-based catalysts. The combination of passivation elements and catalytically active elements is crucial for simultaneously achieving high corrosion resistance and high catalytic activity. Herein, the self-selection/reconstruction characteristics of multi-element (nonary) alloys that can automatically redistribute suitable elements and rearrange surface structures under the target reaction conditions during the oxygen evolution reaction are investigated. The following synergetic effect (i.e., cocktail effect), among the elements Ti, Zr, Nb, and Mo, significantly contributes to passivation, whereas Cr, Co, Ni, Mn, and Fe enhance the catalytic activity. According to the practical water electrolysis experiments, the self-selected/reconstructed multi-element alloy demonstrates high performance under a similar condition with proton exchange membrane (PEM)-type water electrolysis without obvious degradation during stability tests. This verifies the resistance of the alloy to corrosion when used as an electrode under a practical PEM electrolysis condition.

Modification of Fab Fragments by Dibromopyridazinediones Carrying Mono- and Double-Biotin Functionalities.

To verify the potencies of dibromopyridazinediones with mono- and double-biotin groups, the functions as cysteine-selective biotinylation reagents were evaluated through conjugation with a goat anti-mouse IgG Fab fragment as a functional protein model. The starting Fab was reduced with tris(2-carboxyethyl)phosphine to cleave the disulfide bond and then treated with the reagents. These reagents simultaneously introduced biotin groups into the reduced Fab and re-bridged the disulfide moiety. Furthermore, we demonstrated that the biotin-labeled Fabs were reactive to an antigen and streptavidin.

Dendritic maleimide-thiol adducts carrying pendant glycosides as high-affinity ligands.

We synthesized N-acetylglucosamine-terminated hexavalent carbosilane dendrimers and investigated their binding to wheat germ agglutinin (WGA). The glycodendrimers were prepared by the conjugation of 3-mercaptopropyl, 4-mercaptobutyl, or 5­mercaptopentyl glycosides to maleimide-terminated hexavalent carbosilane dendrimers. Titration of WGA with the glycodendrimers yielded quenching of tryptophan fluorescence. All of the glycodendrimers exhibited high affinity with nanomolar dissociation constants (KD values). The best dendrimers were 1a and 1b with KD values of 6.5 ± 1.7 and 5.3 ± 1.7 nM, respectively. The magnitude of fluorescence quenching increased with decrease in the length of the thioalkyl spacer. Maleimide-pendant carbosilane dendrimers provide ready access to multivalent ligands with high-affinity potential.

Preparation of glycopolymers having sialyl α2 → 3 lactose moieties as the potent inhibitors for mumps virus.

A water-soluble glycomonomer having a sialyl α2 â†’ 3 lactose (SLac) moiety was prepared from a known imidate derivative of the SLac and an acrylamide alcohol by means of Schmidt's protocol followed by transesterification. Polymerization of the monomer proceeded in water as the solvent in the presence of ammonium persulfate (APS)-tetramethylethylenediamine (TEMED). Since acryl amide (AAm) was used as a regulator for the arrangement of sugar density, three kinds of glycopolymers having different sugar densities were obtained. Infection inhibition assays of mumps virus (MuV) for Vero cells using the glycopolymers were performed, and the results showed that a glycopolymer having a low sugar density has the highest inhibitory potency. In comparison to sialyl Lewis X (SLeX) as the strongest inhibitor in a previous study, SLac polymer with the low sugar density showed ten-times stronger inhibitory potency than that of SLex. This finding suggested that multivalent conversion of the monomeric SLac with appropriate spatial arrangement are able to effectively inhibit the interaction between the attachment glycoprotein of MuV and glycan receptors on Vero cells.

TEMPO-Substituted Poly(ethylene sulfide) for Solid-State Electro-Chemical Charge Storage.

A poly(ethylene sulfide) backbone is introduced as the main chain of a radical polymer. Anionic ring-opening polymerization of an episulfide monomer substituted with 2,2,6,6tetramethylpiperidin1oxyl (TEMPO), a robust nitroxide radical, yields the corresponding polythioether. Compared to the traditional poly(ethylene oxide) backbone, the new polymer shows a lower glass transition temperature (-10 °C), and about threefold higher solid-state ionic conductivity. The polythioether is also shown to improve the charge/discharge properties of a cathode in solid-state lithium-ion batteries.

Impaired O-Glycosylation at Consecutive Threonine TTX Motifs in Mucins Generates Conformationally Restricted Cancer Neoepitopes.

Autoantibody signatures of circulating mucin fragments stem from cancer tissues, and microenvironments are promising biomarkers for cancer diagnosis and therapy. This study highlights dynamic epitopes generated by aberrantly truncated immature O-glycosylation at consecutive threonine motifs (TTX) found in mucins and intrinsically disordered proteins (IDPs). NMR analysis of synthetic mucin models having glycosylated TTX motifs and colonic MUC2 tandem repeats (TRs) containing TTP and TTL moieties unveils a general principle that O-glycosylation at TTX motifs generates a highly extended and rigid conformation in IDPs. We demonstrate that the specific conformation of glycosylated TTX motifs in MUC2 TRs is rationally rearranged by concerted motions of multiple dihedral angles and noncovalent interactions between the carbohydrate and peptide region. Importantly, this canonical conformation of glycosylated TTX motifs minimizes steric crowding of glycans attached to threonine residues, in which O-glycans possess restricted orientations permitting further sugar extension. An antiadhesive microarray displaying synthetic MUC2 derivatives elicited the presence of natural autoantibodies to MUC2 with impaired O-glycosylation at TTX motifs in sera of healthy volunteers and patients diagnosed with early stage colorectal cancer (CRC). Interestingly, autoantibody levels in sera of the late stage CRC patients were distinctly lower than those of early stage CRC and normal individuals, indicating that the anti-MUC2 humoral response to MUC2 neoepitopes correlates inversely with the CRC stage of patients. Our results uncovered the structural basis of the creation of dynamic epitopes by immature O-glycosylation at TTX motifs in mucins that facilitates the identification of high-potential targets for cancer diagnosis and therapy.

Fluorogenic glycopolymers available for determining the affinity of lectins by intermolecular FRET.

A convenient assembly of fluorogenic glycopolymers having various polymer compositions was accomplished from the corresponding glycomonomer and dansyl monomer by means of radical polymerization, and the water-soluble glycopolymers gave typical fluorescence spectroscopic profiles due to the dansyl moieties on the glycopolymer in aqueous media. Biological evaluation of the polymer against wheat germ agglutinin (WGA) was accomplished on the basis of fluorescence changes due to tryptophan residues on WGA, and the affinities between the glycopolymers and WGA were estimated to be 4.7 × 105 to 9.3 × 105 M-1. In order to apply the fluorogenic glycopolymers for further biological measurements, efficient resonance energy transfer from tryptophan moieties on WGA to dansyl moieties on the fluorogenic glycopolymers was examined. FRET profiles of both fluorophores were similar compared to the binding profiles on the basis of fluorescence changes of tryptophan residues. This approach is applicable for the determination of an affinity constant between a carbohydrate and a lectin in which no fluorophore exists near the binding site.

Neuraminidase-triggered activation of prodrug-type substrate of 4-nitroaniline.

Artificial substrates for probing neuraminidase activity are powerful tools for studying the physiological and pathological roles of neuraminidases. Most of the substrates are α-O-linked sialosides involving hydroxyl-containing reporters for visualization, and neuraminidase-catalyzed cleavage of the sialic acid residues directly activates the reporters. However, the use of amine-containing reporters has been avoided because α-N-linked sialosides are marginal substrates for neuraminidases. To expand the applicability of reporters to amine-containing compounds, we have focused on prodrug design. Herein we describe the synthesis and enzymatic study of a model substrate involving 4-nitroaniline as an amine-containing chromogenic reporter. The substrate can respond to neuraminidase from Clostridium perfringens. Neuraminidase-mediated hydrolysis of the sialic acid moiety of the substrate initiates self-immolative elimination of the linker moiety, leading the liberation of yellow-colored reporter 4-nitroaniline. The elimination process involves generation of quinone methide intermediate, which causes to neutralize neuraminidase. The substrate, thus, works as not only a chromogenic substrate but also a suicide inactivator.

Synthetic construction of sugar-amino acid hybrid polymers involving globotriaose or lactose and evaluation of their biological activities against Shiga toxins produced by Escherichia coli O157:H7.

Synthetic assembly of sugar moieties and amino acids in order to create "sugar-amino acid hybrid polymers" was accomplished by means of simple radical polymerization of carbohydrate monomers having an amino acid-modified polymerizable aglycon. Amines derived from globotriaoside and lactoside as glycoepitopes were condensed with known carbobenzyloxy derivatives, including Z-Gly, Z-l-Ala and Z-ß-Ala, which had appropriate spacer ability and a chiral center to afford fully protected sugar-amino acid hybrid compounds in good yields. After deprotection followed by acryloylation, the water-soluble glycomonomers were polymerized with or without acrylamide in the presence of a radical initiator in water to give corresponding copolymers and homopolymers, which were shown by SEC analysis to have high molecular weights. Evaluation of the biological activities of the glycopolymers against Shiga toxins (Stxs) was carried out, and the results suggested that glycopolymers having highly clustered globotriaosyl residues had high affinity against Stx2 (KD = 2.7∼4.0 µM) even though other glycopolymers did not show any affinity or showed very weak binding affinity. When Stx1 was used for the same assay, all of the glycopolymers having globotriaosyl residues showed high affinity (KD = 0.30∼1.74 µM). Interestingly, couple of glycopolymers having lactosyl moieties had weaker binding affinity against Stx1. In addition, when cytotoxicity assays were carried out for both Stxs, glycopolymers having highly clustered globotriaosyl residues showed higher affinity than that of the copolymers, and only highly clustered-type glycopolymers displayed neutralization potency against Stx2.

Preparation of Functional Monomers as Precursors of Bioprobes from a Common Styrene Derivative and Polymer Synthesis.

CM-Str (4-(Chloromethyl)styrene) was used as a useful starting material for the construction of a series of functional monomers. Substitution of the chlorine to the corresponding azide was performed, and the reduction of the azide proceeded smoothly to afford an aminostyrene, which was used as a common precursor for the preparation of functional monomers. Condensation of the amine with a fluorophore, biotin and carbohydrate was accomplished. Among the monomers, a carbohydrate monomer was polymerized with or without acrylamide as a model polymerization to yield the corresponding water-soluble glycopolymers, and biological evaluations of the glycopolymers for a lectin, and wheat germ agglutinin (WGA), were carried out on the basis of the fluorescence change of tryptophan in the WGA.

An incomplete pacemaker lead fracture causing inappropriate pacing inhibition due to oversensing of the minute ventilation sensor pulses.

Cardiac pacemakers using rate response technologies represent the effectiveness of increasing the heart rate and cardiac output during exercise. Minute ventilation (MV) sensors are popular and estimate rates using transthoracic impedance by emitting very low amperage short electrical current pulses between the pacemaker lead tip and pulse generator. We present a case of an incomplete pacemaker lead fracture developing inappropriate pacing inhibition due to oversensing caused by the electrical current emitted by the MV sensor. A permanent pacemaker replacement was performed, resulting in no further abnormal findings such as inappropriate pacing inhibition. .

2-Benzoylpyridine Ligand Complexation with Gold Critical for Propargyl Ester-Based Protein Labeling.

In previously reported work, AuIII complexes coordinated with 2-benzoylpyridine ligand, BPy-Au, were prebound to a protein and used to discover a novel protein-directed labeling approach with propargyl ester functional groups. In this work, further examination discovered that gold catalysts devoid of the 2-benzoylpyridine ligand (e.g., NaAuCl4) had significantly reduced levels of protein labeling. Mechanistic investigations then revealed that BPy-Au and propargyl esters undergo a rare example of C(sp2 )-C(sp) aryl-alkynyl cross-coupling, likely through spontaneous reductive elimination. Overall, these observations appear to suggest that BPy-Au-mediated, propargyl ester-based protein labeling acts via an activated ester intermediate, which contributes to our understanding of this process and will aid the expansion/optimization of gold-catalyst usage in future bioconjugation applications, especially in vivo.