Edible films and coatings - Not just packaging materials.

Edible films and coatings (EFC) are macromolecular-based structures forming thin layers that are usually studied as tools to improve food stability, sometimes being considered as parts of both the packaging system and the food itself. However, EFC are not mere packaging materials, and sometimes they do not even play roles related to those of packaging. This graphical review summarizes possible roles of EFC, including primary packaging, keeping water activity gradients between food components, controlling mass transfer on food processing, carrying active components, or serving as sources of sensory appeal. EFC may even be designed in a way that two or more of those roles may be played simultaneously.

Zinc loading in urea-formaldehyde nanocomposites increases nitrogen and zinc micronutrient fertilization efficiencies in poor sand substrate.

Agricultural output needs significant increases to feed the growing population. Fertilizers are essential for plant production systems, with nitrogen (N) being the most limiting nutrient for plant growth. It is commonly supplied to crops as urea. Still, due to volatilization, up to 50 % of the total N application is lost. Slow or controlled release fertilizers are being developed to reduce these losses. The co-application of zinc (Zn) as a micronutrient can increase N absorption. Thus, we hypothesize that the controlled delivery of both nutrients (N and Zn) in an integrated system can improve uptake efficiency. Here we demonstrate an optimized fertilizer nanocomposite based on urea:urea-formaldehyde matrix loaded with ZnSO4 or ZnO. This nanocomposite effectively stimulates maize development, with consequent adequate N uptake, in an extreme condition - a very nutrient-poor sand substrate. Our results indicate that the Zn co-application is beneficial for plant development. However, there were advantages for ZnO due to its high Zn content. We discuss that the dispersion favors the Zn delivery as the nanoparticulated oxide in the matrix. Concerning maize development, we found that root morphology is altered in the presence of the fertilizer nanocomposite. Increased root length and surface area may improve soil nutrient uptake, potentially accompanied by increased root exudation of essential compounds for N release from the composite structure.

Bacterial Photoinactivation Using PLGA Electrospun Scaffolds.

The use of ultraviolet (UV) and blue irradiation to sterilize surfaces is well established, but commercial applications would be enhanced if the light source is replaced with ambient light. In this paper, it is shown that nanofibers can be explored as an alternative methodology to UV and blue irradiation for bacterial inactivation. It is demonstrated that this is indeed possible using spun nanofibers of poly[lactic-co-(glycolic acid)] (PLGA). This work shows that PLGA spun scaffolds can promote photoinactivation of Staphylococcus aureus and Escherichia coli bacteria with ambient light or with laser irradiation at 630 nm. With the optimized scaffold composition of PLGA85:15 nanofibers, the minimum intensity required to kill the bacteria is much lower than in antimicrobial blue light applications. The enhanced effect introduced by PLGA scaffolds is due to their nanofiber structures since PLGA spun nanofibers were able to inactivate both S. aureus and E. coli bacteria, but cast films had no effect. These findings pave the way for an entirely different method to sterilize surfaces, which is less costly and environmentally friendly than current procedures. In addition, the scaffolds could also be used in cancer treatment with fewer side effects since photosensitizers are not required.

Different Zn loading in Urea-Formaldehyde influences the N controlled release by structure modification.

Nitrogen fertilization has been a critical factor for high crop productivity, where urea is currently the most used N source due to its high concentration and affordability. Nevertheless, urea fast solubilization leads to frequent losses and lower agronomic efficiency. The modification of urea structure by condensation with formaldehyde has been proposed to improve nutrient uptake by plants and to reduce environmental losses. Herein we show that the co-formulation with Zn strongly modifies the N release (in lab conditions) and, more important, the Zn source-ZnSO4 or ZnO-has a critical role. Urea-formaldehyde (UF) served as a matrix for the zinc sources, and chemical characterizations revealed that Zn particles influenced the length of the polymeric chain formation. Release tests in an aqueous medium showed that the UF matrix favors ZnO release and, on the other hand, delays ZnSO4 delivery. Soil incubation with the fertilizer composites proved the slow-release of N from UF, is ideal for optimizing nutritional efficiency. Our results indicated that the ZnO-UF system has beneficial effects for both nutrients, i.e., reduces N volatilization and increases Zn release.

Nanostructured Antimicrobials in Food Packaging-Recent Advances.

Active food packaging systems promote better food quality and/or stability, such as by releasing antimicrobial agents into food. Advantages of adding antimicrobials to the packaging material instead of into the bulk food include controlled diffusion, reduced antimicrobial contents, and improved cost effectiveness. Nanostructured antimicrobials are especially effective due to their high specific surface area. The present review is focused on recent advances and findings on the main nanostructured antimicrobial packaging systems for food packaging purposes. Several kinds of nanostructures, including both inorganic particles and organic structures, have been proven effective antimicrobials by different mechanisms of action and with different application scopes. Moreover, there are systems containing nanocarriers to protect antimicrobials and deliver them in a controlled fashion. On the other hand, scientific data about migration of nanostructures onto food and their toxicity are still limited, requiring special attention from researchers and regulation sectors.

A new approach to obtain cellulose nanocrystals and ethanol from eucalyptus cellulose pulp via the biochemical pathway.

The feasibility of integration of cellulosic ethanol production with the manufacture of cellulose nanofibers (CNF) and cellulose nanocrystals (CNC) was evaluated using eucalyptus cellulose pulp as feedstock and employing the biochemical route alone. For the enzymatic hydrolysis step, experimental central composite design (CCD) methodology was used as a tool to evaluate the effects of solids loading (SL) and enzymatic loading (EL) on glucose release and cellulose conversion. Glucose concentrations from 45 to 125 g/L were obtained after 24 h, with cellulose conversions from 35 to 96%. Validation of the statistical model was performed at SL of 20% and EL of 10 mg protein/g, which was defined by the desirability function as the optimum condition. The sugars released were used for the production of ethanol by Saccharomyces cerevisiae, resulting in 62.1 g/L ethanol after 8 h (yield of 95.5%). For all the CCD experimental conditions, the residual solids presented CNF characteristics. Moreover, the use of a new strategy with temperature reduction from 50 to 35°C after 24 h of enzymatic hydrolysis enabled CNC to be obtained after 144 h. The CNC showed a crystallinity index of 83%, length of 260 nm, diameter of 15 nm, and aspect ratio (L/D) of 15. These characteristics are suitable for many applications, such as reinforcement in polymeric materials and other lower volume higher value bio-based products. The findings indicate the viability of obtaining ethanol and CNC using the biochemical route exclusively, potentially contributing to the future implementation of forest biorefineries. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1085-1095, 2017.

Nanocellulose reinforced chitosan composite films as affected by nanofiller loading and plasticizer content.

UNLABELLED: Chitosan is a biopolymer obtained by N-deacetylation of chitin, produced from shellfish waste, which may be employed to elaborate edible films or coatings to enhance shelf life of food products. This study was conducted to evaluate the effect of different concentrations of nanofiller (cellulose nanofibers, CNF) and plasticizer (glycerol) on tensile properties (tensile strength-TS, elongation at break-EB, and Young's modulus-YM), water vapor permeability (WVP), and glass transition temperature (T(g)) of chitosan edible films, and to establish a formulation to optimize their properties. The experiment was conducted according to a central composite design, with 2 variables: CNF (0 to 20 g/100 g) and glycerol (0 to 30 g/100 g) concentrations in the film (on a dry basis), which was produced by the so-called casting technique. Most responses (except by EB) were favored by high CNF concentrations and low glycerol contents. The optimization was based on maximizing TS, YM, and T(g), and decreasing WVP, while maintaining a minimum acceptable EB of 10%. The optimum conditions were defined as: glycerol concentration, 18 g/100 g; and CNF concentration, 15 g/100 g. AFM imaging of films suggested good dispersion of the CNF and good CNF-matrix interactions, which explains the good performance of the nanocomposite films. PRACTICAL APPLICATION: Chitosan is a biodegradable polymer which may be used to elaborate edible films or coatings to enhance shelf life of foods. This study demonstrates how cellulose nanofibers (CNF) can improve the mechanical and water vapor barrier properties of chitosan films. A nanocomposite film with 15% CNF and plasticized with 18% glycerol was comparable to some synthetic polymers in terms of strength and stiffness, but with poorer elongation and water vapor barrier, indicating that they can be used for applications that do not require high flexibility and/or water vapor barrier. The more important advantage of such films when compared to synthetic polymer films is their environmentally friendly properties.

Nanocomposite edible films from mango puree reinforced with cellulose nanofibers.

Cellulose nanoreinforcements have been used to improve mechanical and barrier properties of biopolymers, whose performance is usually poor when compared to those of synthetic polymers. Nanocomposite edible films have been developed by adding cellulose nanofibers (CNF) in different concentrations (up to 36 g/100 g) as nanoreinforcement to mango puree based edible films. The effect of CNF was studied in terms of tensile properties, water vapor permeability, and glass transition temperature (T(g)) of the nanocomposite films. CNF were effective in increasing tensile strength, and its effect on Young's modulus was even more noticeable, especially at higher concentrations, suggesting the formation of a fibrillar network within the matrix. The addition of CNF was also effective to improve water vapor barrier of the films. Its influence on T(g) was small but significant. The study demonstrated that the properties of mango puree edible films can be significantly improved through CNF reinforcement.