Melamine-based metal-organic frameworks for high-performance supercapacitor applications.

Melamine-based metal-organic frameworks (MOFs) for high-performance supercapacitor applications are described in this paper. Melamine (Me) is employed as an organic linker, and three metal ions cobalt, nickel, and iron (Co, Ni, Fe) are used ascentral metal ions to manufacture the desired MOF materials (Co-Me, Ni-Me, and Fe-Me). While melamine is an inexpensive organic linker for creating MOF materials, homogenous molecular structures can be difficult to produce. The most effective technique for expanding the molecular structures of MOFs through suitable experimental optimization is used in this work. The MOFs materials are characterized using standard techniques. The kinetics of the materials' reactions are investigated using attenuated total reflectance. X-ray photoelectron spectroscopy (XPS), powder X-ray diffraction (P-XRD), Fourier transform infrared (ATR-FT-IR) spectroscopy, and Brunauer-Emmett-Teller (BET) studies verified the development of the MOFs structure. The surface morphology of the produced materials is investigated using field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), and atomic force microscopy (AFM). The elements found in MOFs are studied via XPS analysis, energy dispersive X-ray diffraction (EDX), mapping, and mapping. The materials' absorption characteristics were examined by the use of UV-visible absorption spectroscopy. The thermal stability of the materials is examined by thermogravimetric analysis (TGA); these materials are more stable, according to the findings, even at high temperatures. The electrochemical investigation determines the specific capacitance of the materials. The specific capacitance of Co-Me, Ni-Me, and Fe-Me in 3 M KOH electrolyte is 1267.36, 803.22, and 507.59F/g @ 1 A-1, according to the three-electrode arrangement. The two-electrode device maximizes power and energy density by using an asymmetrical supercapacitor in a 3 M KOH electrolyte. The power and energy densities of Co-Me, Ni-Me, and Fe-Me are 3650.63, 2813.21, and 6210.45 W kg-1, and 68.43, 46.32, and 42.2 Wh kg-1, respectively. According to the materials stability test, the MOFs are highly stable after 10,000 cycles. Preliminary results suggest that the materials are suitable for usage in high-end supercapacitor uses.

Eggshell membrane as a novel and green platform for the preparation of highly efficient and reversible curcumin-based colorimetric sensor for the monitoring of chicken freshness.

Herein, for the very first time, we report a paper-like biomass, eggshell membrane (ESM), as a suitable platform for the fabrication of a colorimetric sensor (E-Cot). Green ethanolic extract, curcumin (CUR), was used as a sensing material to coat with the ESM. The present E-Cot effectively changed its color (yellow to red) in the real-time monitoring for chicken spoilage. The E-Cot exhibits barrier properties due to its inherent semi-permeability characteristics. Interestingly, the E-Cot showed a significant change in total color difference value (ΔE, 0 days - 0.0-39.6, after 1 day - 39.6-42.1, after 2 days - 42.1-53.6, after 3 days- 53.6-60.1, and after 4 days - 60.1-66.3, detectable by the naked eye) in the real-time monitoring for chicken freshness. In addition, the present E-Cot smart colorimetric sensor is reversible with a change in pH, and the sensor can be reused. Further, the hydrophobic nature of the E-Cot was confirmed by water contact angle analysis (WCA, contact angle of 101.21 ± 8.39). Good antibacterial, barrier, and optical properties of the present E-Cot were also found. Owing to the advantages such as green, efficient, cost-effective, biodegradable, reusable, sustainable, and simple preparation, we believe that the present E-Cot would be a more attractive candidate.

A Review on Electrospun Nanofiber Composites for an Efficient Electrochemical Sensor Applications.

The present review article discusses the elementary concepts of the sensor mechanism and various types of materials used for sensor applications. The electrospinning method is the most comfortable method to prepare the device-like structure by means of forming from the fiber structure. Though there are various materials available for sensors, the important factor is to incorporate the functional group on the surface of the materials. The post-modification sanction enhances the efficiency of the sensor materials. This article also describes the various types of materials applied to chemical and biosensor applications. The chemical sensor parts include acetone, ethanol, ammonia, and CO2, H2O2, and NO2 molecules; meanwhile, the biosensor takes on glucose, uric acid, and cholesterol molecules. The above materials have to be sensed for a healthier lifestyle for humans and other living organisms. The prescribed review articles give a detailed report on the Electrospun materials for sensor applications.

Sea-Island-Like Morphology of CuNi Bimetallic Nanoparticles Uniformly Anchored on Single Layer Graphene Oxide as a Highly Efficient and Noble-Metal-Free Catalyst for Cyanation of Aryl Halides.

Aryl nitriles are versatile compounds that can be synthesized via transition-metal-mediated cyanation of aryl halides. Most of the supported-heterogeneous catalysts are noble-metals based and there are very limited numbers of efficient non-noble metal based catalysts demonstrated for the cyanation of aryl halides. Herein, bimetallic CuNi-oxide nanoparticles supported graphene oxide nanocatalyst (CuNi/GO-I and CuNi/GO-II) has been demonstrated as highly efficient system for the cyanation of aryl halides with K4[Fe(CN)6] as a cyanating agent. Metal-support interaction, defect ratio and synergistic effect with the bimetallic nanocatalyst were investigated. To our delight, the CuNi/GO-I system activity transformed a wide range of substrates such as aryl iodides, aryl bromides, aryl chlorides and heteroaryl compounds (Yields: 95-71%, TON/TOF: 50-38/2 h-1). Moreover, enhanced catalytic performance of CuNi/GO-I and CuNi/GO-II in reduction of 4-nitropehnol with NaBH4 was also confirmed (kapp = 18.2 × 10-3 s-1 with 0.1 mg of CuNi/GO-I). Possible mechanism has been proposed for the CuNi/GO-I catalyzed cyanation and reduction reactions. Reusability, heterogeneity and stability of the CuNi/GO-I are also found to be good.

Cationic-cellulose nanofibers: preparation and dyeability with anionic reactive dyes for apparel application.

Continuous effort in research and development of nanofibers for apparel usage has been focused within their functional properties only. We investigated esthetic properties by producing colored cationic-cellulose nanofibers for the very first time for the potential application of apparel use. The cellulose acetate nanofibers were electrospun followed by deacetylation and cationization to produce functional cationic-cellulose nanofibers and then dyed with anionic reactive dyes. The spectrophotometric measurement of dyed samples was carried out to determine color coordinates and color yield values. The cationic-cellulose nanofibers showed enhanced color yield and dye fixation without addition of an electrolyte in comparison to cellulose nanofibers. The cationization of cellulose nanofibers significantly enhanced the color yield values of around 76% at dye concentrations of 5%. Excellent color fastness results demonstrate that these new colored and breathable materials can potentially be considered as future apparel for casual or fashion.