Real-Time Imaging of Plasmonic Concentric Circular Gratings Fabricated by Lens-Axicon Laser Interference Lithography.

Concentric circular gratings are diffractive optical elements useful for polarization-independent applications in photonics and plasmonics. They are usually fabricated using a low-throughput and expensive electron beam lithography technique. In this paper, concentric circular gratings with selectable pitch values were successfully manufactured on thin films of azobenzene molecular glass using a novel laser interference lithography technique utilizing Bessel beams generated by a combined lens-axicon configuration. This innovative approach offers enhanced scalability and a simplified manufacturing process on larger surface areas compared to the previously reported techniques. Furthermore, the plasmonic characteristics of these concentric circular gratings were investigated using conventional spectrometric techniques after transferring the nanostructured patterns from azobenzene to transparent gold/epoxy thin films. In addition, the real-time imaging of surface plasmon resonance colors transmitted from the concentric circular gratings was obtained using a 45-megapixel digital camera. The results demonstrated a strong correlation between the real-time photographic technique and the spectroscopy measurements, validating the efficacy and accuracy of this approach for the colorimetric studying of surface plasmon resonance responses in thin film photonics.

Biomimetic macroscopic hierarchical moire gratings.

Large-scale hierarchical macroscopic moire gratings resembling the surface structure of Peruvian lily flower petals are fabricated on azobenzene molecular glass thin films using a Lloyd's mirror interferometer. It is shown that nanostructured linear and crossed moire gratings can be made with pitch values reaching a few millimeters. Also, using atomic force microscopy, scanning electron microscopy, optical microscopy, and surface profilometry techniques, it is shown that the obtained moire gratings have two-fold or three-fold hierarchical structures fabricated using a simple all optical technique.

Tunable narrowband plasmonic light emission from metallic crossed surface relief gratings.

Plasmonic crossed surface relief gratings were fabricated using interference lithography. Their topographies were studied by AFM as a function of laser exposure time and their surface plasmon resonance at a gold-air interface was measured between crossed polarizers in transmission and in reflection modes. Both modes resulted in emitted plasmonic light at specific wavelengths related to the grating pitch, with the reflectance SPR having a much higher intensity than the transmittance SPR. The use of these gratings as plasmonic sensors was examined and their sensitivities were measured in the reflectance and transmittance modes to be 601 nm/RIU and 589 nm/RIU, respectively.

Ensemble and Single Particle Fluorescence Characterization of Dye-Labeled Cellulose Nanocrystals.

Cellulose nanocrystals (CNCs) have been covalently labeled with both fluorescein and rhodamine and studied by a combination of UV-vis absorption spectroscopy and ensemble and single molecule fluorescence spectroscopy. For all samples, the fluorescence anisotropy and lifetimes were consistent with effects expected for covalently bound dye molecules. Low dye loading levels (∼0.1 dye/particle) were estimated for the fluorescein-labeled CNC which coupled with the strong pH dependence make this a less suitable fluorophore for most applications. Rhodamine-labeled CNCs were prepared from both sulfated and carboxylated CNCs and had loading levels that varied from 0.25 to ∼15 dye molecules/CNC. For the sulfated samples, the absorption due to (nonfluorescent) dimeric dye increased with dye loading; in contrast, the carboxylated sample, which had the highest rhodamine content, had a low dimer yield. Single particle fluorescence studies for two of the rhodamine-labeled CNCs demonstrated that individual particles are readily detected by their stepwise blinking/bleaching behavior and by polarization effects. Overall, the results indicate the importance of understanding the effects of loading on dye photophysics to select an optimal dye concentration to maximize sensitivity while minimizing the effect of the dye on the CNC behavior. The results also demonstrate that CNCs with relatively low dye loadings (e.g., ∼1 dye/particle) are readily detectable by fluorescence and should be adequate for use in fluorescence-based biological assays or to probe the distribution of CNCs in composite materials.

Fabrication of three-dimensional carbon nanotube and metal oxide hybrid mesoporous architectures.

Three-dimensional (3D) vertically aligned carbon nanotube (CNT) patterns were utilized as templates for fabricating mesoporous hybrid architectures composed of CNTs and various crystalline metal oxide (MO; M = Co, Zn, Mn) nanoparticles by a microwave-assisted chemical approach. Post-synthesis thermal treatment of the CNT/MO patterns culminated in structural reorganization, depending on the treatment conditions. In air, CNTs were removed by oxidation. The remaining MO architectures preserved the shape and alignment of the original 3D CNT patterns, but with different porosity characteristics and improved MO crystallinity. Elastocapillary condensation and bending were demonstrated to be useful tools for further architecture alternation. The mesoporous nature of the CNT/MO hybrids and the MO materials were confirmed by N2-BET measurements. CNT/Co3O4 aligned strips were used as an example to demonstrate the potential application of the CNT/MO architectures as electrode materials for supercapacitive storage. Galvanostatic measurements showed that the CNT/Co3O4 strips were stable up to 1000 charge-discharge cycles at a current density of 377 µA/cm(2) with a specific capacitance as high as 123.94 F/g.

Ultrasonic induced photoluminescence decay in sonochemically obtained cauliflower-like ZnO nanostructures with surface 1D nanoarrays.

Cauliflower-like ZnO nanostructures with average crystallite size of about 55 nm which have surface one dimensional (1D) nanoarrays with 10 nm diameter were successfully fabricated through a simple sonochemical route. X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and room temperature photoluminescence (PL) characterizations were performed to investigate the morphological and structural properties of the obtained nanostructures. It has been shown that the synthesized cauliflower-like ZnO nanostructures irradiated UV luminescence and a green peak in visible band. Ultrasonic post-treatment of the particles for about 2 h increased the density of surface defects resulted in an increase in the green emission intensity.