Advances in bioadhesives for meniscal repair: A comprehensive review and criteria for the ideal candidate.

The latest studies agree that meniscal tears that require surgery should be repaired whenever possible to avoid early-onset osteoarthritis secondary to meniscectomy. Unfortunately, there are several limitations associated with meniscal sutures, making it difficult to put into practice the theory behind the concept of saving the meniscus. Meanwhile, there is an exponential growth in the use of tissue adhesives for surgery, but finding one suited to meniscal repair remains a struggle. This review has two main goals (1) to compile the various bioadhesives used in this field and (2) to list the criteria for an ideal meniscal bioadhesive. The review was conducted in PubMed, Google Scholar, and Web of Science in November 2023 without date restrictions. The inclusion criteria were: Studies published in English and focusing on meniscal repair using bioadhesives. The exclusion criteria were: Studies published in languages other than English. Adhesives used in combination with sutures, as the aim was to determine the adhesive's capabilities for meniscal repair alone. Synthetic adhesives such as polycyanoacrylates, polyethylene glycol, polyurethanes, and polyesters. Among the 11 bioadhesives found, fibrin is the only one that has been studied in humans. There are advantages and disadvantages to all the bioadhesives identified but none that fully meet the requirements for meniscal repair. The anatomy of meniscal tissue is complex and poses unique challenges that are compounded by arthroscopic stresses. The future of meniscal repair probably lies in combining the advantages of several bioadhesives, and this area should be the focus of future research.

Animal models used in meniscal repair research from ex vivo to in vivo: A systematic review.

This systematic review, registered with Prospero, aims to identify an optimal animal model for meniscus repair research, moving from ex vivo experimentation to in vivo studies. Data sources included PubMed, Medline, all Evidence-Based Medicine Reviews, Web of Science, and Embase searched in March 2023. Studies were screened using Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Extracted data including animal model, type of experiment, type of tear, surgical techniques, and measured outcomes, were recorded, reviewed, and analyzed by four independent reviewers. The SYstematic Review Centre for Laboratory animal Experimentation (SYRCLE) Rob tool was used for critical appraisal and risk of bias assessment. Out of 11,719 studies, 72 manuscripts were included for data extraction and analysis; 41 ex vivo extra-articular studies, 20 ex vivo intra-articular studies, and only 11 in vivo studies. Six animal models were employed: porcine, bovine, lapine, caprine, canine, and ovine. Longitudinal lesions were the most frequently studied tear pattern and sutures the most common repair technique. Studied outcomes focused mainly on biomechanical assessments and gross observations. This systematic review can guide researchers in their choice of animal model for meniscus repair research; it highlighted the strengths of the porcine, caprine, and bovine models for ex vivo cadaveric studies, while the porcine and caprine models were found to be more suited to in vivo studies due to their similarities with human anatomy. Research teams should familiarize themselves with the advantages and disadvantages of various animal models before initiating protocols to improve standardization in the field.

Impact of tourniquet use in total knee arthroplasty on functional recovery and postoperative pain: a prospective study.

BACKGROUND: Tourniquet use during total knee arthroplasty (TKA) remains controversial. The purpose of this study is to determine the impact of tourniquet use only during cementation compared with its use throughout the entire surgery concerning early outcomes in functional recovery, pain, quadriceps function, and rehabilitation. METHODS: Between November 2019 and March 2020, 118 patients were enrolled in this study, with 59 patients undergoing TKA with a tourniquet during the entire surgery (group 1) and 59 patients with a tourniquet only during cementation (group 2). Twenty-eight patients were unable to complete follow-up leaving fifty in group 1 and forty in group 2. Primary endpoints were surgical time, postoperative knee and thigh pain, and functional recovery. Secondary endpoints were 6-month clinical scores and blood loss. RESULTS: Patients in group 1 had statistically significantly increased knee pain on postoperative day 3 (p = 0.004), and thigh pain on postoperative day 1 (p < 0.001), 2 (p < 0.001), and 3 (p = 0.027), and longer time intervals to achieve straight leg raise maneuver (p = 0.006) compared to group 2. However, it did not affect overall narcotic consumption, knee pain (day 1-2), functional recovery, ROM, ability to do the first walk, Oxford knee score, length of stay, and complication rate. There was no statistically significant difference in terms of 6-month postoperative knee score, surgical time, and blood loss between the two groups. CONCLUSION: Tourniquet use diminishes quadriceps function and increases postoperative thigh pain and, to a lesser extent, knee pain. We, therefore, recommend the use of a tourniquet only during cementing. LEVEL OF EVIDENCE: 1; prospective randomized study.

Tough gel adhesive is an effective method for meniscal repair in a bovine cadaveric study.

PURPOSE: To test tough gel adhesives to repair meniscus tears under relevant loading conditions and determine if they have adequate biomechanical properties to repair meniscus tears in a bovine cadaveric study. METHODS: Cyclic compression tests on 24 dissected bovine knees were performed. The tough gel adhesive was used either as an adhesive patch or as a coating bonded onto commercially available surgical sutures. Forty-eight menisci were tested in this study; 24 complete radial tears and 24 bucket-handle tears. After preconditioning, the specimens underwent 100 cycles of compression, (800 N/0.5 Hz) on an Instron© machine and the size of the gaps measured. One third of the menisci were repaired with pristine sutures, one third with adhesive patches, and one third with sutures coated in adhesive gel. The size of the gaps was compared after 100 and 500 cycles of compression. RESULTS: The mean gap measured at the tear site without treatment was 6.46 mm (± 1.41 mm) for radial tears and 1.92 mm (± 0.65 mm) for bucket-handle tears. After treatment and 500 cycles of compression, the mean gap was 1.63 mm (± 1.41 mm) for pristine sutures, 1.50 mm (± 1.16 mm) for adhesive sutures and 2.06 mm (± 1.53 mm) for adhesive gel patches. There was no significant difference between treatments regardless of the type of tear. Also, the gaps for radial tears increased significantly with the number of compression cycles applied (p > 0.001). CONCLUSION: From a biomechanical standpoint, the tough adhesive gel patch is as effective as suturing. In addition, it would allow the repair of non-suturable tears and thus broaden the indications for meniscus repair. LEVEL OF EVIDENCE: Controlled laboratory study.

Modification of the properties of a suture thread with a tough gel coating: A baseline ex-vivo study.

The mechanical properties of sutures are important for wound closure and meniscus repair. A tough gel coating technology has been developed to modify and functionalize sutures, but its effects on suture degradation remain unexplored. Our aim is to investigate how a tough gel coating mediates the properties of the suture. The Polyglactin910 (Vicryl) suture was chosen because it is widely used, strong, easy to handle, and degradable. This study compared six pristine Vicryl sutures and six coated Vicryl sutures at 0, 2, 4, and 6 weeks. All the sutures were soaked in phosphate-buffered saline (PBS), to mimic degradation in physiological conditions, and tensile strength was tested at each time point. The pH of the soaking mediums was measured weekly and compared at 4, 5, and 6 weeks. No significant difference (p = 0.059 and p = 0.576) was found between the absolute and normalized breaking force of coated and pristine Vicryl sutures at 0, 2, 4, and 6 weeks. After 4 weeks of immersion, the soaking medium became more acidic for both suture types. The decrease in pH was less significant for coated Vicryl sutures than for pristine ones (p < 0.001) at 4, 5, and 6 weeks of immersion. Although coating does not affect the strength of Vicryl sutures soaked in PBS, it can effectively act as a buffer to the acidic environment caused by suture degradation, which could help reduce inflammation. Hydrogel coating is a promising technology to modify suture characteristics.

Osteonecrosis of the trapezium: a case report and review of the literature.

We describe the case of a 58-year-old woman with AVN of the left trapezium which was treated surgically. This paper aims to review the etiologies leading to the pathology and the different therapeutic options. Avascular necrosis (AVN) of the carpal bones most commonly involves the lunate and the scaphoid . AVN of the trapezium is extremely rare. To our knowledge only 3 cases have been published in the literature so far and they were all treated differently.

Knee mega-prosthesis in the management of complex knee fracture of the elderly : a case series and review of the literature.

The management of complicated distal femur fractures (DFF) of the elderly continues to pose a challenge. Knee mega-prosthesis are mostly used for Total knee arthroplasty revision and tumor resection surgery but they can be used for the treatment of complex knee fractures. The purpose of the present study is to examine the short- to mid- term outcomes of their use for complex DFF of the elderly. We retrospectively identified 4 patients with DFF AO33C3 on osteoporotic bone treated by total knee arthroplasty from September 2015 to October 2019. The average age at the time of the surgery was 79,5 years (range, 69 to 95 years). All patients were females and underwent a total knee replacement by one senior surgeon, with the OSS TM Orthopaedic Salvage System (Zimmer Biomet, Warsaw, Indiana, USA). Outcome measures included clinical outcome scores, radiological analyses, reoperation rate and complications. At an average follow-up of 2,3 years (range, 0,6 to 4,2 years), the average Western Ontario and McMaster Universities Osteoarthritis index (WOMAC) was 17,25 (range, 7 to 37), the average Oxford knee score was 35,25 (range, 25 to 41) and the average pain Numerical Rating Scale (NRS) was 0,5 (range, 0 to 1). 3 Patients had postoperative anemia but no implant related complications has been reported. Complex DFF of the elderly treated with mega knee arthroplasty exhibit good clinical outcomes scores. The patients should be selected carefully as the complication rate found in the literature remains high.

Orthopaedic support with 3D printing in children : marketing effect or solution of the future?

In pediatric orthopaedics, the immobilization of a limb is traditionally done by a cast. The emergence of 3D technologies allows us to produce restraints specific to the anatomical characteristics of the patient. This paper aims to determine the feasibility of the process of developing these restraints. Descriptive study of the creation process involving 19 patients aged 2 to 14 years for whom a restraint was placed between April 2018 and November 2018. This was mainly post-traumatic pathology (12) and children having a clubfoot (7). This type of restraint has the following characteristics : use of recyclable material ; lightness ; ventilation ; visibility of the underlying skin tissue and its hydro-compatibility. The major limitations remaining are production time and printing errors. The emergence of 3D printing, allows us to extend its application to the medical world. When the therapeutic effectiveness of a restraint is achieved, quality of life becomes the main selection criterion. Based on observations already made in the past, we were able to develop a model that combines the advantages of the different approaches. New 3D printing technologies allow the creation of restraint devices with many advantages and customized adaptation possibilities.