Lassa fever research priorities: towards effective medical countermeasures by the end of the decade.

In 2016, WHO designated Lassa fever a priority disease for epidemic preparedness as part of the WHO Blueprint for Action to Prevent Epidemics. One aspect of preparedness is to promote development of effective medical countermeasures (ie, diagnostics, therapeutics, and vaccines) against Lassa fever. Diagnostic testing for Lassa fever has important limitations and key advancements are needed to ensure rapid and accurate diagnosis. Additionally, the only treatment available for Lassa fever is ribavirin, but controversy exists regarding its effectiveness. Finally, no licensed vaccines are available for the prevention and control of Lassa fever. Ongoing epidemiological and behavioural studies are also crucial in providing actionable information for medical countermeasure development, use, and effectiveness in preventing and treating Lassa fever. This Personal View provides current research priorities for development of Lassa fever medical countermeasures based on literature published primarily in the last 5 years and consensus opinion of 20 subject matter experts with broad experience in public health or the development of diagnostics, therapeutics, and vaccines for Lassa fever. These priorities provide an important framework to ensure that Lassa fever medical countermeasures are developed and readily available for use in endemic and at-risk areas by the end of the decade.

Measures to prevent and treat Nipah virus disease: research priorities for 2024-29.

Nipah virus causes highly lethal disease, with case-fatality rates ranging from 40% to 100% in recognised outbreaks. No treatments or licensed vaccines are currently available for the prevention and control of Nipah virus infection. In 2019, WHO published an advanced draft of a research and development roadmap for accelerating development of medical countermeasures, including diagnostics, therapeutics, and vaccines, to enable effective and timely emergency response to Nipah virus outbreaks. This Personal View provides an update to the WHO roadmap by defining current research priorities for development of Nipah virus medical countermeasures, based primarily on literature published in the last 5 years and consensus opinion of 15 subject matter experts with broad experience in development of medical countermeasures for Nipah virus or experience in the epidemiology, ecology, or public health control of outbreaks of Nipah virus. The research priorities are organised into four main sections: cross-cutting issues (for those that apply to more than one category of medical countermeasures), diagnostics, therapeutics, and vaccines. The strategic goals and milestones identified in each section focus on key achievements that are needed over the next 6 years to ensure that the necessary tools are available for rapid response to future outbreaks of Nipah virus or related henipaviruses.

An open-source molecular diagnostic platform approach for outbreak and epidemic preparedness.

BACKGROUND: Diagnostic development for outbreak pathogens has typically followed a disease-specific reactive rather than proactive response. Given the diversity of outbreak pathogens, particularly those prioritised by the World Health Organization Research and Development Blueprint, a more flexible and proactive approach to epidemic preparedness is needed to expand access to critical molecular diagnostic tests in peripheral and resource-constrained deployment settings. OBJECTIVE: New and more sustainable directives are needed to spur the development of high-quality products, particularly for epidemics more often found in low- and middle-income countries. To leverage and de-risk the development process, we present the benefits and challenges of an open-source business model for co-development of molecular diagnostic tests for decentralised settings. METHODS: We identify key outbreak pathogens that are available only for testing in high infrastructure laboratories and compare in-country installed base platforms that could be leveraged for menu expansion. Key strengths and challenges for development are highlighted for both platform and assay developers, with discussion of how to leverage and de-risk the process through an open-source development model. RESULTS: Depending on the specific partner strengths, options for partnership roles are presented. The proposed open-source business model addresses the particular challenges in the detection of outbreak- and epidemic-prone pathogens in low- and middle-income countries, reduces development and deployment risks to support outbreak response, strengthens diagnostic capacity and creates a viable market for product developers. CONCLUSION: We hope this model for a collaborative and open-source approach for molecular diagnostics serves to encourage stakeholders to consider co-development partnerships to improve outbreak preparedness and epidemic/pandemic response.

An updated roadmap for MERS-CoV research and product development: focus on diagnostics.

Diagnostics play a central role in the early detection and control of outbreaks and can enable a more nuanced understanding of the disease kinetics and risk factors for the Middle East respiratory syndrome-coronavirus (MERS-CoV), one of the high-priority pathogens identified by the WHO. In this review we identified sources for molecular and serological diagnostic tests used in MERS-CoV detection, case management and outbreak investigations, as well as surveillance for humans and animals (camels), and summarised the performance of currently available tests, diagnostic needs, and associated challenges for diagnostic test development and implementation. A more detailed understanding of the kinetics of infection of MERS-CoV is needed in order to optimise the use of existing assays. Notably, MERS-CoV point-of-care tests are needed in order to optimise supportive care and to minimise transmission risk. However, for new test development, sourcing clinical material continues to be a major challenge to achieving assay validation. Harmonisation and standardisation of laboratory methods are essential for surveillance and for a rapid and effective international response to emerging diseases. Routine external quality assessment, along with well-characterised and up-to-date proficiency panels, would provide insight into MERS-CoV diagnostic performance worldwide. A defined set of Target Product Profiles for diagnostic technologies will be developed by WHO to address these gaps in MERS-CoV outbreak management.

Diagnostics for Nipah virus: a zoonotic pathogen endemic to Southeast Asia.

Nipah virus (NiV) is an emerging pathogen that, unlike other priority pathogens identified by WHO, is endemic to Southeast Asia. It is most commonly transmitted through exposure to saliva or excrement from the Pteropus fruit bat, or direct contact with intermediate animal hosts, such as pigs. NiV infection causes severe febrile encephalitic disease and/or respiratory disease; treatment options are limited to supportive care. A number of in-house diagnostic assays for NiV using serological and nucleic acid amplification techniques have been developed for NiV and are used in laboratory settings, including some early multiplex panels for differentiation of NiV infection from other febrile diseases. However, given the often rural and remote nature of NiV outbreak settings, there remains a need for rapid diagnostic tests that can be implemented at the point of care. Additionally, more reliable assays for surveillance of communities and livestock will be vital to achieving a better understanding of the ecology of the fruit bat host and transmission risk to other intermediate hosts, enabling implementation of a 'One Health' approach to outbreak prevention and the management of this zoonotic disease. An improved understanding of NiV viral diversity and infection kinetics or dynamics will be central to the development of new diagnostics, and access to clinical specimens must be improved to enable effective validation and external quality assessments. Target product profiles for NiV diagnostics should be refined to take into account these outstanding needs.

Diagnostics for filovirus detection: impact of recent outbreaks on the diagnostic landscape.

Ebolaviruses and Marburg virus (MARV) both belong to the family Filoviridae and cause severe haemorrhagic fever in humans. Due to high mortality rates and potential for spread from rural to urban regions, they are listed on the WHO R&D blueprint of high-priority pathogens. Recent ebolavirus outbreaks in Western and Central Africa have highlighted the importance of diagnostic testing in epidemic preparedness for these pathogens and led to the rapid development of a number of commercially available benchtop and point-of-care nucleic acid amplification tests as well as serological assays and rapid diagnostic tests. Despite these advancements, challenges still remain. While products approved under emergency use licenses during outbreak periods may continue to be used post-outbreak, a lack of clarity and incentive surrounding the regulatory approval pathway during non-outbreak periods has deterred many manufacturers from seeking full approvals. Waning of funding and poor access to samples after the 2014-2016 outbreak also contributed to cessation of development once the outbreak was declared over. There is a need for tests with improved sensitivity and specificity, and assays that can use alternative sample types could reduce the need for invasive procedures and expensive equipment, making testing in field conditions more feasible. For MARV, availability of diagnostic tests is still limited, restricted to a single ELISA test and assay panels designed to differentiate between multiple pathogens. It may be helpful to extend the target product profile for ebolavirus diagnostics to include MARV, as the viruses have many overlapping characteristics.

Diagnostic tests for Crimean-Congo haemorrhagic fever: a widespread tickborne disease.

Crimean-Congo haemorrhagic fever (CCHF) is a widespread tickborne disease that circulates in wild and domestic animal hosts, and causes severe and often fatal haemorrhagic fever in infected humans. Due to the lack of treatment options or vaccines, and a high fatality rate, CCHF virus (CCHFV) is considered a high-priority pathogen according to the WHO R&D Blueprint. Several commercial reverse transcriptase PCR (RT-PCR) and serological diagnostic assays for CCHFV are already available, including febrile agent panels to distinguish CCHFV from other viral haemorrhagic fever agents; however, the majority of international laboratories use inhouse assays. As CCHFV has numerous amplifying animal hosts, a cross-sectoral 'One Health' approach to outbreak prevention is recommended to enhance notifications and enable early warning for genetic and epidemiological shifts in the human, animal and tick populations. However, a lack of guidance for surveillance in animals, harmonisation of case identification and validated serodiagnostic kits for animal testing hinders efforts to strengthen surveillance systems. Additionally, as RT-PCR tests tend to be lineage-specific for regional circulating strains, there is a need for pan-lineage sensitive diagnostics. Adaptation of existing tests to point-of-care molecular diagnostic platforms that can be implemented in clinic or field-based settings would be of value given the potential for CCHFV outbreaks in remote or low-resource areas. Finally, improved access to clinical specimens for validation of diagnostics would help to accelerate development of new tests. These gaps should be addressed by updated target product profiles for CCHFV diagnostics.

Diagnostic applications for Lassa fever in limited-resource settings.

Lassa fever, caused by arenavirus Lassa virus (LASV), is an acute viral haemorrhagic disease that affects up to an estimated 300 000 individuals and causes up to 5000 deaths per year in West Africa. Currently available LASV diagnostic methods are difficult to operationalise in low-resource health centres and may be less sensitive to detecting all known or emerging LASV strains. To prioritise diagnostic development for LASV, we assessed the diagnostic applications for case detection, clinical management, surveillance, outbreak response, and therapeutic and vaccine development at various healthcare levels. Diagnostic development should prioritise point-of-care and near-patient diagnostics, especially those with the ability to detect all lineages of LASV, as they would allow for rapid detection in resource-limited health facilities closer to the patient.

Diagnostics for Lassa fever virus: a genetically diverse pathogen found in low-resource settings.

Lassa fever virus (LASV) causes acute viral haemorrhagic fever with symptoms similar to those seen with Ebola virus infections. LASV is endemic to West Africa and is transmitted through contact with excretions of infected Mastomys natalensis rodents and other rodent species. Due to a high fatality rate, lack of treatment options and difficulties with prevention and control, LASV is one of the high-priority pathogens included in the WHO R&D Blueprint. The WHO LASV vaccine strategy relies on availability of effective diagnostic tests. Current diagnostics for LASV include in-house and commercial (primarily research-only) laboratory-based serological and nucleic acid amplification tests. There are two commercially available (for research use only) rapid diagnostic tests (RDTs), and a number of multiplex panels for differential detection of LASV infection from other endemic diseases with similar symptoms have been evaluated. However, a number of diagnostic gaps remain. Lineage detection is a challenge due to the genomic diversity of LASV, as pan-lineage sensitivity for both molecular and immunological detection is necessary for surveillance and outbreak response. While pan-lineage ELISA and RDTs are commercially available (for research use only), validation and external quality assessment (EQA) is needed to confirm detection sensitivity for all known or relevant strains. Variable sensitivity of LASV PCR tests also highlights the need for improved validation and EQA. Given that LASV outbreaks typically occur in low-resource settings, more options for point-of-care testing would be valuable. These requirements should be taken into account in target product profiles for improved LASV diagnostics.

Perspectives on introduction and implementation of new point-of-care diagnostic tests.

In recent years, there has been significant investment from both the private and public sectors in the development of diagnostic technologies to meet the need for human immunodeficiency virus (HIV) and tuberculosis testing in low-resource settings. Future investments should ensure that the most appropriate technologies are adopted in settings where they will have a sustainable impact. Achieving these aims requires the involvement of many stakeholders, as their needs, operational constraints, and priorities are often distinct. Here, we discuss these considerations from different perspectives representing those of various stakeholders involved in the development, introduction, and implementation of diagnostic tests. We also discuss some opportunities to address these considerations.

Integrated heaters for temperature control in disposable bioassay cartridges for use with portable, battery-operated instruments.

Two methods for heating fluids in microliter- to milliliter-scale reaction chambers in disposable bioassay cartridges are analyzed and compared. Inductive heating requires no electrical contact between the energy source and the cartridge and uses a very inexpensive component in the cartridge. Resistive heating with a surface mount component requires electrical interconnection, but is generally conducive to low-cost off-the-shelf components. Typical power consumption for both inductive heating and resistive heating is consistent with battery-powered operation. A finite element model for heating an injection-molded plastic cartridge with a surface-mount resistor has been developed and validated through experiments on a 40 mm × 10 mm × 7.5 mm injection molded polystyrene cartridge with embedded 1 kΩ surface-mount resistors. A model of frequency-dependent heat generation in a novel inductive heating device is also presented.