The effects of degree of dark cutting on tenderness and sensory attributes of beef.

The objective of this study was to determine the effect of degree of dark cutting (DC) on the tenderness, juiciness, and flavor attributes of beef. During carcass grading at a large U.S. commercial beef harvesting facility, DC carcasses ( = 160) and matching normal control (NC) carcasses ( = 160) were selected. Longissimus lumborum (LL) pH was determined and DC carcasses were classified as severe (severe dark cutter [SEDC]; mean pH = 6.9; = 40), moderate (moderate dark cutter [MODC]; mean pH = 6.6; n = 40), mild (mild dark cutter [MIDC]; mean pH = 6.4; = 40), or shady (shady dark cutter [SHDC]; mean pH = 6.1; = 40). Strip loins were obtained from the left carcass sides, vacuum-packaged, and aged at 1°C. Slice shear force (SSF) was measured (14 d postmortem) fresh (never frozen), and trained descriptive sensory analysis of tenderness, juiciness, and flavor was measured (13 d postmortem) on frozen/thawed LL steaks. Cooked SSF pieces were frozen and used for western blotting of desmin to determine extent of postmortem proteolysis. Thaw and cook loss decreased as intensity of DC increased, with SEDC having the lowest loss (1.83 and 10.1%, respectively) compared with NC (3.37 and 14.9%, respectively). Slice shear force was higher (P < 0.05) for SHDC (25.6 kg) and MIDC (22.9 kg) compared with SEDC (16.8 kg), MODC (19.4 kg), and NC (17.8 kg). Sarcomere length was shorter ( < 0.05) between DC class (1.66, 1.67, 1.71, and 1.73 µm for SEDC, MODC, MIDC, and SHDC, respectively) and NC (1.86 µm). Postmortem proteolysis of desmin was greater ( < 0.05) for NC compared with all DC classes (59.83% vs. 49.20, 40.31, 42.07, and 43.30% for SEDC, MODC, MIDC, and SHDC, respectively). Trained sensory panel ratings for tenderness differed ( < 0.05) among DC class with SEDC (6.51) the most tender followed by MODC (6.04) and then MIDC (5.19), whereas SHDC (4.66) and NC (4.93) were the toughest. Juiciness ratings differed ( < 0.05) among each DC class (5.9, 5.7, 5.4, and 5.2 for SEDC, MODC, MIDC, and SHDC, respectively), with no difference between MIDC or SHDC compared with NC (5.23). Fat-like, rancid, heated oil, chemical, and musty/earthy/hummus flavors increased ( < 0.05) whereas metallic, sour, and salty flavors decreased as severity of DC increased. This study showed DC and NC differed in LL tenderness, juiciness, and flavor. The direction and/or magnitude of those differences were greatly dependent on severity of DC. Steaks with intermediate pH (SHDC and MIDC) are most likely to be tough and are regularly included in U.S. Select and U.S. Choice product lines.

Phase I of The National Beef Quality Audit-2011: quantifying willingness-to-pay, best-worst scaling, and current status of quality characteristics in different beef industry marketing sectors.

The National Beef Quality Audit (NBQA)-2011 benchmarked the current status of and assessed progress being made toward quality and consistency of U.S. cattle, carcasses, and beef products after the completion of the first NBQA in 1991. Unlike previous NBQA, objectives of the 2011 Phase I study were to determine how each beef market sector defined 7 quality categories, estimate willingness-to-pay (WTP) for the same quality categories by market sector, and establish a best-worst (B/W) scaling for the quality categories. Structured face-to-face interviews were conducted and responses were recorded using dynamic routing software over an 11-mo period (February to December 2011) with decision makers in each of the following beef market sectors: Feeders (n = 59), Packers (n = 26), Food Service, Distribution, and Further Processors (n = 48), Retailers (n = 30), and Government and Allied Industries (n = 47). All respondents participated in a structured interview consisting of WTP and B/W questions that were tied to 7 quality categories and then were asked to "define" each of the 7 categories in terms of what the category meant to them, resulting in completely unbiased results. The 7 quality categories were a) how and where the cattle were raised, b) lean, fat, and bone, c) weight and size, d) cattle genetics, e) visual characteristics, f) food safety, and g) eating satisfaction. Overall, "food safety" and "eating satisfaction" were the categories of greatest and second most importance, respectively, to all beef market sectors except for Feeders. Feeders ranked "how and where the cattle were raised" and "weight and size" as the most important and second most important, respectively. Overall, "how and where the cattle were raised" had the greatest odds of being considered a nonnegotiable requirement before the raw material for each sector would be considered for purchase and was statistically more important (P < 0.05) as a requirement for purchase than all other categories except "food safety." When all market sectors were considered, "eating satisfaction" was shown to generate the greatest average WTP percentage premium (11.1%), but that WTP premium value only differed statistically (P < 0.05) from "weight and size" (8.8%). Most notably, when a sector said that "food safety" was a nonnegotiable requirement, no sector was willing to purchase the product at a discounted price if the "food safety" of the product could not be assured.

National Beef Quality Audit-2011: Harvest-floor assessments of targeted characteristics that affect quality and value of cattle, carcasses, and byproducts.

The National Beef Quality Audit-2011 (NBQA-2011) was conducted to assess targeted characteristics on the harvest floor that affect the quality and value of cattle, carcasses, and byproducts. Survey teams evaluated approximately 18,000 cattle/carcasses between May and November 2011 in 8 beef processing facilities. Cattle identification methods were lot visual tags (85.7%), individual visual tags (50.6%), electronic tags (20.1%), metal-clip tags (15.7%), other (5.3%), none (2.5%), and wattles (0.5%). Hide colors or breed types were black (61.1%), red (12.8%), yellow (8.7%), Holstein (5.5%), brown (5.0%), gray (5.0%), white (1.4%), and brindle (1.0%). Brand frequencies were none (55.2%), 1 (40.4%), 2 (4.4%), and 3 or more (0.04%) brands, and brands were located on the butt (35.2%), side (9.0%), and shoulder (2.5%). Hide locations of mud or manure were no mud/manure (49.2%), legs (36.8%), belly (23.7%), side (14.9%), top-line (11.0%), and tail region (13.7%). There were 76.2% of cattle without horns, and the majority of those with horns (71.6%) were between 0 cm and 12.7 cm in length. Permanent incisor numbers were zero (87.3%), 1 (1.4%), 2 (8.0%), 3 (0.9%), 4 (1.9%), 5 (0.3%), 6 (0.2%), 7 (0.1%), and 8 (0.02%). Most carcasses (77.0%) were not bruised, 18.7% had 1 bruise, 3.4% had 2 bruises, 0.6% had 3 bruises, and 0.3% had more than 3 bruises. Bruise locations were loin (50.1%), rib (21.3%), chuck (13.8%), round (7.3%), and brisket/flank/plate (7.5%). Condemnation item and incidence were whole carcass (none recorded), liver (20.9%), lungs (17.3%), tongue (10.0%), viscera (9.3%), and head (7.2%). Compared with the NBQA-2005, the NBQA-2011 had an increased percentage of black-hided cattle (56.3 vs. 61.1%), more cattle with brands (38.7 vs. 44.8%), and more cattle with some form of identification (93.3 vs. 97.5%). In addition, there was a lesser percentage of carcasses with bruising in 2011 (23.0%) than in 2005 (35.2%), as well as a smaller percentage of carcasses with more than 1 bruise (2005 = 9.4% vs. 2011 = 4.2%). Compared with the 2005 audit, a similar percentage of the cattle were deemed 30 mo of age or older using dentition (2005 = 2.7% vs. 2011 = 3.3%). The information from NBQA-2011 helps the beef industry measure progress against previous NBQA assessments and provides a benchmark for future educational and research activities.

Effect of long-term corn by-product feeding on beef quality, strip loin fatty acid profiles, and shelf life.

The objective of this study was to evaluate the meat quality and shelf life of steaks from steers fed dried distillers grains with solubles (DDGS) or dried corn gluten feed (CGF) compared with soybean meal with corn (SBM) as a protein supplement from weaning to slaughter. Angus cross steers (n = 81; BW = 306 ± 26.1 kg) were randomly assigned to pens (n = 9) and fed a stocker diet of corn silage (75% of DM) with DDGS, CGF, or SBM and ground ear corn. After 84 d of stockering, 12 steers (BW = 397 ± 15.3 kg) were randomly selected from each treatment and finished using the same protein supplement at 25% of DM for 100 d. Carcass data were collected (24 h) and the longissimus lumborum was fabricated into steaks at 48 h postmortem. Steaks were assigned to proximate analysis, Warner-Bratzler shear force (7-, 14-, or 21-d aging), and retail display (1, 3, 6, or 9 d). Protein source did not affect carcass yield, quality, or longissimus lumborum composition (P > 0.05). After 7 d of aging, DDGS and CGF steaks were more tender (P < 0.01) than SBM, but were similar (P = 0.30) after 14 and 21 d of aging. Feeding corn by-products did not influence subjective overall color acceptance (P = 0.17) in this study, but acceptance declined over time (P < 0.01). Subjective redness was similar (P > 0.05) among diets except SBM steaks were more red (P < 0.01) than DDGS after 9 d. On d 3 and 6 of retail display, CGF steaks exhibited more discoloration (P < 0.04) than SBM or DDGS steaks. However, after 9 d DDGS steaks were more discolored (P < 0.01) than CGF or SBM. Objective L* was lighter for CGF (P < 0.04) over 9 d of display, and all treatments became darker (P < 0.01) as time increased. Redness (a*) declined (P < 0.01) over time with SBM steaks maintaining more color in the red spectrum than CGF and DDGS after 6 d of display. Protein source did not affect (P > 0.05) the rate of lipid oxidation. Total SFA concentrations were similar (P > 0.05) among treatments; however, total MUFA were less (P < 0.05) and total PUFA concentrations were greater (P < 0.05) in DDGS steaks compared with SBM or CGF steaks. These data show that DDGS or CGF can be fed as a protein supplement at 25% DM from weaning until slaughter while maintaining meat quality when compared with steers fed soybean meal as a protein supplement.

The effect of pH on shelf-life of pork during aging and simulated retail display.

The pork industry uses pH to differentiate product of varying quality; thus, the effect of pH on shelf-life is important as time during transport is extended. The objective was to develop regression equations to predict shelf-life over a range of ultimate pH (5.42-6.26). Shelf-life was evaluated after vacuum aging pork loin sections 0, 7, 14, 21, or 28d and during 3d of simulated retail display (4.5°C) for pork loin chops. Correlation coefficients indicated a strong relationship between pH and quality measurements. Regression analysis with Aging Day and pH was able to explain 87% of the variation in aerobic plate counts for pork. After 28d of vacuum aging, loin sections from the upper end of the pH distribution had about a 3log(1000X) greater aerobic plate count than did the lower end pH product. An increase in pH resulted in pork with lower L*, a*, b* and R(630)-R(580) values and as Aging Day increased, instrumental measurements of color increased slightly. Although higher pH is associated with improved pork quality, higher pH and longer aging periods will result in increased microbial proliferation and decreased shelf-life. Thus, an intermediate pH may provide the most desirable combination of quality and shelf-life when extensive aging is used.