Inverse plan optimization accounting for random geometric uncertainties with a multiple instance geometry approximation (MIGA).

Radiotherapy treatment plans that are optimized to be highly conformal based on a static patient geometry can be degraded by setup errors and/or intratreatment motion, particularly for IMRT plans. To achieve improved plans in the face of geometrical uncertainties, direct simulation of multiple instances of the patient anatomy (to account for setup and/or motion uncertainties) is used within the inverse planning process. This multiple instance geometry approximation (MIGA) method uses two or more instances of the patient anatomy and optimizes a single beam arrangement for all instances concurrently. Each anatomical instance can represent expected extremes or a weighted distribution of geometries. The current implementation supports mapping between instances that include distortions, but this report is limited to the use of rigid body translations/ rotations. For inverse planning, the method uses beamlet dose calculations for each instance, with the resulting doses combined using a weighted sum of the results for the multiple instances. Beamlet intensities are then optimized using the inverse planning system based on the cost for the composite dose distribution. MIGA can simulate various types of geometrical uncertainties, including random setup error and intratreatment motion. A limited number of instances are necessary to simulate Gaussian-distributed errors. IMRT plans optimized using MIGA show significantly less degradation in the face of geometrical errors, and are robust to the expected (simulated) motions. Results for a complex head/neck plan involving multiple target volumes and numerous normal structures are significantly improved when the MIGA method of inverse planning is used. Inverse planning using MIGA can lead to significant improvements over the use of simple PTV volume expansions for inclusion of geometrical uncertainties into inverse planning, since it can account for the correlated motions of the entire anatomical representation. The optimized plan results reflect the differing patient geometry situations which can be important near the surface or heterogeneities. For certain clinical situations, the MIGA optimization approach can correct for a significant part of the degradation of the plan caused by the setup uncertainties.

Inclusion of organ deformation in dose calculations.

A previously described system for modeling organ deformation using finite element analysis has been extended to permit dose calculation. Using this tool, the calculated dose to the liver during radiotherapy can be compared using a traditional static model (STATIC), a model including rigid body motion (RB), and finally a model that incorporates rigid body motion and deformation (RBD). A model of the liver, consisting of approximately 6000 tetrahedral finite elements distributed throughout the contoured volume, is created from the CT data obtained at exhale. A deformation map is then created to relate the liver in the exhale CT data to the liver in the inhale CT data. Six intermediate phase positions of each element are then calculated from their trajectories. The coordinates of the centroid of each element at each phase are used to determine the dose received. These intermediate dose values are then time weighted according to a population-modeled breathing pattern to determine the total dose to each element during treatment. This method has been tested on four patient datasets. The change in prescribed dose for each patient's actual tumor as well as a simulated tumor of the same size, located in the superior, intermediate, and inferior regions of the liver, was determined using a normal tissue complication model, maintaining a predicted probability of complications of 15%. The average change in prescribed dose from RBD to STATIC for simulated tumors in the superior, intermediate, and inferior regions are 4.0 (range 2.1 to 5.3), -3.6 (range -5.0 to -2.2), and -14.5 (range -27.0 to -10.0) Gy, respectively. The average change in prescribed dose for the patient's actual tumor was -0.4 Gy (range -4.1 to 1.7 Gy). The average change in prescribed dose from RBD to RB for simulated tumors in the superior, intermediate, and inferior regions are -0.04 (range -2.4 to 2.2), 0.2 (range -1.5 to 1.9), and 3.9 (range 0.8 to 7.3) Gy, respectively. The average change in the prescribed dose for the patient's actual tumor was 0.7 Gy (range 0.2 to 1.1 Gy). This patient sampling indicates the potential importance of including deformation in dose calculations.

Is uniform target dose possible in IMRT plans in the head and neck?

PURPOSE: Various published reports involving intensity-modulated radiotherapy (IMRT) plans developed using automated optimization (inverse planning) have demonstrated highly conformal plans. These reported conformal IMRT plans involve significant target dose inhomogeneity, including both overdosage and underdosage within the target volume. In this study, we demonstrate the development of optimized beamlet IMRT plans that satisfy rigorous dose homogeneity requirements for all target volumes (e.g., +/-5%), while also sparing the parotids and other normal structures. METHODS AND MATERIALS: The treatment plans of 15 patients with oropharyngeal cancer who were previously treated with forward-planned multisegmental IMRT were planned again using an automated optimization system developed in-house. The optimization system allows for variable sized beamlets computed using a three-dimensional convolution/superposition dose calculation and flexible cost functions derived from combinations of clinically relevant factors (costlets) that can include dose, dose-volume, and biologic model-based costlets. The current study compared optimized IMRT plans designed to treat the various planning target volumes to doses of 66, 60, and 54 Gy with varying target dose homogeneity while using a flexible optimization cost function to minimize the dose to the parotids, spinal cord, oral cavity, brainstem, submandibular nodes, and other structures. RESULTS: In all cases, target dose uniformity was achieved through steeply varying dose-based costs. Differences in clinical plan evaluation metrics were evaluated for individual cases (eight different target homogeneity costlets), and for the entire cohort of plans. Highly conformal plans were achieved, with significant sparing of both the contralateral and ipsilateral parotid glands. As the homogeneity of the target dose distributions was allowed to decrease, increased sparing of the parotids (and other normal tissues) may be achieved. However, it was shown that relatively few patients would benefit from the use of increased target inhomogeneity, because the range of improvement in the parotid dose is relatively limited. Hot spots in the target volumes are shown to be unnecessary and do not assist in normal tissue sparing. CONCLUSION: Sparing of both parotids in patients receiving bilateral neck radiation can be achieved without compromising strict target dose homogeneity criteria. The geometry of the normal tissue and target anatomy are shown to be the major factor necessary to predict the parotid sparing that will be possible for any particular case.

An apparatus for applying strong longitudinal magnetic fields to clinical photon and electron beams.

Monte Carlo studies have recently renewed interest in the use of the effect of strong transverse and longitudinal magnetic fields to manipulate the dose characteristics of clinical photon and electron beams. A 3.5 T superconducting solenoidal magnet was used to evaluate the effect of a longitudinal field on both photon and electron beams. This note describes the apparatus and demonstrates some of the effects on the beam trajectory and dose distributions for measurements in a homogeneous phantom. The effects were studied using film in air and in phantoms which fit in the magnet bore. The magnetic field focused and collimated the electron beams. The converging, non-uniform field confined the beam and caused it to converge with increasing depth in the phantom. Due to the field's collecting and focusing effect, the beam flux density increased, leading to increased dose deposition near the magnetic axis, especially near the surface of the phantom. This study illustrates some benefits and challenges associated with the use of non-uniform longitudinal magnetic fields in conjunction with clinical electron and photon beams.

Planning, computer optimization, and dosimetric verification of a segmented irradiation technique for prostate cancer.

PURPOSE: To develop and verify a multisegment technique for prostate irradiation that results in better sparing of the rectal wall compared to a conventional three-field technique, for patients with a concave-shaped planning target volume (PTV) overlapping the rectal wall. METHODS AND MATERIALS: Five patients have been selected with various degrees of overlap between PTV and rectal wall. The planned dose to the ICRU reference point is 78 Gy. The new technique consists of five beams, each having an open segment covering the entire PTV and several smaller segments in which the rectum is shielded. Segment weights are computer-optimized using an algorithm based on simulated annealing. The score function to be minimized consists of dose-volume constraints for PTV, rectal wall, and femoral heads. The resulting dose distribution is verified for each patient by using point measurements and line scans made with an ionization chamber in a water tank and by using film in a cylindrical polystyrene phantom. RESULTS: The final number of segments in the five-field technique ranges from 7 to 9 after optimization. Compared to the standard three-field technique, the maximum dose to the rectal wall decreases by approximately 3 Gy for patients with a large overlap and 1 Gy for patients with no overlap, resulting in a reduction of the normal tissue complication probability (NTCP) by a factor of 1.3 and 1.2, respectively. The mean dose to the PTV is the same for the two techniques, but the dose distribution is slightly less homogeneous with the five-field technique (Average standard deviation of five patients is 1.1 Gy and 1.7 Gy for the three-field and five-field technique, respectively). Ionization chamber measurements show that in the PTV, the calculated dose is in general within 1% of the measured dose. Outside the PTV, systematic dose deviations of up to 3% exist. Film measurements show that for the complete treatment, the position of the isodose lines in sagittal and coronal planes is calculated fairly accurately, the maximum distance between measured and calculated isodoses being 4 mm. CONCLUSIONS: We developed a relatively simple multisegment "step-and-shoot" technique that can be delivered within an acceptable time frame at the treatment machine (Extra time needed is approximately 3 minutes). The technique results in better sparing of the rectal wall compared to the conventional three-field technique. The technique can be planned and optimized relatively easily using automated procedures and a predefined score function. Dose calculation is accurate and can be verified for each patient individually.

Calibration and quality assurance for rounded leaf-end MLC systems.

Multileaf collimator (MLC) systems are available on most commercial linear accelerators, and many of these MLC systems utilize a design with rounded leaf ends and linear motion of the leaves. In this kind of system, the agreement between the digital MLC position readouts and the light field or radiation field edges must be achieved with software, since the leaves do not move in a focused motion like that used for most collimator jaw systems. In this work we address a number of the calibration and quality assurance issues associated with the acceptance, commissioning, and routine clinical use of this type of MLC system. These issues are particularly important for MLCs used for various types of intensity modulated radiation therapy (IMRT) and small, conformal fields. For rounded leaf end MLCs, it is generally not possible to make both the light and radiation field edges agree with the digital readout, so differences between the two kinds of calibrations are illustrated in this work using one vendor's MLC system. It is increasingly critical that the MLC leaf calibration be very consistent with the radiation field edges, so in this work a methodology for performing accurate radiation field size calibration is discussed. A system external to the vendor's MLC control system is used to correct or handle limitations in the MLC control system. When such a system of corrections is utilized, it is found that the MLC radiation field size can be defined with an accuracy of approximately 0.3 mm, much more accurate than most vendor's specifications for MLC accuracy. Quality assurance testing for such a calibration correction system is also demonstrated.

Optimization and clinical use of multisegment intensity-modulated radiation therapy for high-dose conformal therapy.

Intensity-modulated radiation therapy (IMRT) may be performed with many different treatment delivery techniques. This article summarizes the clinical use and optimization of multisegment IMRT plans that have been used to treat more than 350 patients with IMRT over the last 4.5 years. More than 475 separate clinical IMRT plans are reviewed, including treatments of brain, head and neck, thorax, breast and chest wall, abdomen, pelvis, prostate, and other sites. Clinical planning, plan optimization, and treatment delivery are summarized, including efforts to minimize the number of additional intensity-modulated segments needed for particular planning protocols. Interactive and automated optimization of segmental and full IMRT approaches are illustrated, and automation of the segmental IMRT planning process is discussed.

The impact of treatment complexity and computer-control delivery technology on treatment delivery errors.

PURPOSE: To analyze treatment delivery errors for three-dimensional (3D) conformal therapy performed at various levels of treatment delivery automation and complexity, ranging from manual field setup to virtually complete computer-controlled treatment delivery using a computer-controlled conformal radiotherapy system (CCRS). METHODS AND MATERIALS: All treatment delivery errors which occurred in our department during a 15-month period were analyzed. Approximately 34,000 treatment sessions (114,000 individual treatment segments [ports]) on four treatment machines were studied. All treatment delivery errors logged by treatment therapists or quality assurance reviews (152 in all) were analyzed. Machines "M1" and "M2" were operated in a standard manual setup mode, with no record and verify system (R/V). MLC machines "M3" and "M4" treated patients under the control of the CCRS system, which (1) downloads the treatment delivery plan from the planning system; (2) performs some (or all) of the machine set up and treatment delivery for each field; (3) monitors treatment delivery; (4) records all treatment parameters; and (5) notes exceptions to the electronically-prescribed plan. Complete external computer control is not available on M3; therefore, it uses as many CCRS features as possible, while M4 operates completely under CCRS control and performs semi-automated and automated multi-segment intensity modulated treatments. Analysis of treatment complexity was based on numbers of fields, individual segments, nonaxial and noncoplanar plans, multisegment intensity modulation, and pseudoisocentric treatments studied for a 6-month period (505 patients) concurrent with the period in which the delivery errors were obtained. Treatment delivery time was obtained from the computerized scheduling system (for manual treatments) or from CCRS system logs. Treatment therapists rotate among the machines; therefore, this analysis does not depend on fixed therapist staff on particular machines. RESULTS: The overall reported error rate (all treatments, machines) was 0.13% per segment, or 0.44% per treatment session. The rate (per machine) depended on automation and plan complexity. The error rates per segment for machines M1 through M4 were 0.16%, 0.27%, 0.12%, 0.05%, respectively, while plan complexity increased from M1 up to machine M4. Machine M4 (the most complex plans and automation) had the lowest error rate. The error rate decreased with increasing automation in spite of increasing plan complexity, while for the manual machines, the error rate increased with complexity. Note that the real error rates on the two manual machines are likely to be higher than shown here (due to unnoticed and/or unreported errors), while (particularly on M4) virtually all random treatment delivery errors were noted by the CCRS system and related QA checks (including routine checks of machine and table readouts for each treatment). Treatment delivery times averaged from 14 min to 23 min per plan, and depended on the number of segments/plan, although this analysis is complicated by other factors. CONCLUSION: Use of a sophisticated computer-controlled delivery system for routine patient treatments with complex 3D conformal plans has led to a decrease in treatment delivery errors, while at the same time allowing delivery of increasingly complex and sophisticated conformal plans with little increase in treatment time. With renewed vigilance for the possibility of systematic problems, it is clear that use of complete and integrated computer-controlled delivery systems can provide improvements in treatment delivery, since more complex plans can be delivered with fewer errors, and without increasing treatment time.

Source placement error for permanent implant of the prostate.

The performance of ultrasound (US) and fluoroscopic-guided permanent 125I source implant of the prostate using CT identification of the source positions has been evaluated. Marker seeds were implanted during the planning study to assist in the alignment of the US and CT prostate volumes for treatment planning and to guide the placement of needles. The relative positions of the needles and marker seeds were checked by fluoroscopy. A postimplant CT study was used to input the radioactive source positions and to register the sources relative to the preimplant CT and US prostate volumes and the planned source distribution. Source placement errors observed were categorized as: (1) source-to-source spacing differences; (2) needle placement error, both depth and position; and (3) seed splaying, particularly near the prostate periphery. Errors due to source splaying and spacing were in part attributed to prostate motion. Later refinements included fixed-spaced string sources, for which placement errors were smaller than for unattached sources. However, source placement errors due to needle placement error and prostate motion remained unchanged.

Aspects of enhanced three-dimensional radiotherapy treatment planning.

Advances in computer technology have led to the availability of sophisticated three-dimensional treatment planning systems for use in many radiotherapy centers. However, additional complexity in both the planning and delivery of treatments has accompanied their use. Thus, even more computer-aided tools are beginning to appear to address these needs. Aspects of recent enhancements to 3-D treatment planning at the University of Michigan are presented.

Advanced interactive planning techniques for conformal therapy: high level beam descriptions and volumetric mapping techniques.

PURPOSE: To aid in design of conformal radiation therapy treatment plans involving many conformally shaped fields, this work investigates the use of two methodologies to enhance the ease of interactive treatment planning: high-level beam constructs and beam's-eye view volumetric mapping. METHODS AND MATERIALS: High-performance computer graphics running on various workstations using a graphical visualization system (AVS) have been used in this work. Software specific to this application has been written in standard FORTRAN and C languages. A new methodology is introduced by defining radiation therapy "fields" to be composed of multiple beam "segments." Fields can then be defined as higher-level entities such as arcs, cones, and other shapes. A "segmental cone" field, for example, is defined by a symmetry axis and a cone angle, and can be used to rapidly place a series of beam segments that converge at the target volume, while reducing the degree of overlap elsewhere. A new beam's-eye view (BEV) volumetric mapping technique is presented to aid in selecting the placement of conformal radiation fields. With this technique, the relative average dose within an organ of interest is calculated for a sampling of isocentric, conformally shaped beams and displayed either as a "globe," which can be combined with the display of anatomical surfaces, or as a two-dimensionally mapped projection. The dose maps from multiple organs can be generated, stacked, or composited with relative weightings to aid in the placement of fields that minimize overlap with critical structures. RESULTS: The use of these new methodologies is demonstrated for prostate and lung treatment sites and compared to conventional planning techniques. DISCUSSION: The use of many beams for conformal treatment delivery is difficult with current interactive planning. The use of high-level beam constructs provides a means to quickly specify, place, and configure multiple beam arrangements. The BEV volumetrics aids in the placing of fields, which minimize involvement with critical normal tissues. CONCLUSIONS: Early experience with the new methodologies suggest that the new methods help to enhance (or at least speed up) the ability of a treatment planner to create optimal radiation treatment field arrangements.

A computer-controlled conformal radiotherapy system. I: Overview.

PURPOSE: Equipment developed for use with computer-controlled conformal radiotherapy (CCRT) treatment techniques, including multileaf collimators and/or computer-control systems for treatment machines, are now available. The purpose of this work is to develop a system that will allow the safe, efficient, and accurate delivery of CCRT treatments as routine clinical treatments, and permit modifications of the system so that the delivery process can be optimized. METHODS AND MATERIALS: The needs and requirements for a system that can fully support modern computer-controlled treatment machines equipped with multileaf collimators and segmental or dynamic conformal therapy capabilities have been analyzed and evaluated. This analysis has been used to design and then implement a complete approach to the delivery of CCRT treatments. RESULTS: The computer-controlled conformal radiotherapy system (CCRS) described here consists of a process for the delivery of CCRT treatments, and a complex software system that implements the treatment process. The CCRS system described here includes systems for plan transfer, treatment delivery planning, sequencing of the actual treatment delivery process, graphical simulation and verification tools, as well as an electronic chart that is an integral part of the system. The CCRS system has been implemented for use with a number of different treatment machines. The system has been used clinically for more than 2 years to perform CCRT treatments for more than 200 patients. CONCLUSIONS: A comprehensive system for the implementation and delivery of computer-controlled conformal radiation therapy (CCRT) plans has been designed and implemented for routine clinical use with multisegment, computer-controlled, multileaf-collimated conformal therapy. The CCRS system has been successfully implemented to perform these complex treatments, and is considered quite important to the clinical use of modern computer-controlled treatment techniques.

A computer-controlled conformal radiotherapy system. II: Sequence processor.

PURPOSE: A sequence processor (SP) is described as part of a larger computer-controlled conformal radiotherapy system (CCRS). The SP provides the means to accept and then translate highly sophisticated radiation therapy treatment plans into vendor specific instructions to control treatment delivery on a computer-controlled treatment machine. METHODS AND MATERIALS: The sequence processor (SP) is a small workstation computer that interfaces to the control computer of computer-controlled treatment machines, and to other parts of the larger CCRS system. The system reported here has been interfaced to a computer-controlled racetrack microtron with two treatment gantries, and also to other linear accelerator treatment machines equipped with multileaf collimators. An extensive design process has been used in defining the role of the SP within the context of the larger CCRS project. Flexibility and integration with various components of the project, including databases, treatment planning system, graphical simulator, were key factors in the development. In conjunction with the planned set of treatment fields, a procedural scripting language is used to define the sequence of treatment events that are performed, including operator interactions, communications to other systems such as dosimetry and portal imaging devices, and database management. RESULTS: A flexible system has been developed to allow investigation into procedural steps required for simulating and delivering complex radiation treatments. The system has been used to automate portions of the acceptance testing for the control system of the microtron, and is used for routine daily quality assurance testing. The sequence processor system described here has been used to deliver all clinical treatments performed on the microtron system in 2 years of clinical treatment (more than 200 patients treated to a variety of treatment sites). CONCLUSIONS: The sequence processor system has enabled the delivery of complex treatment using computer-controlled treatment machines. The flexibility of the system allows integration with secondary devices and modification of procedural steps, making it possible to develop effective techniques for insuring safe and efficient computer-controlled conformal radiation therapy treatments.

A computer-controlled conformal radiotherapy system. III: Graphical simulation and monitoring of treatment delivery.

PURPOSE: Safe and efficient delivery of radiotherapy using computer-controlled machines requires new procedures to design and verify the actual delivery of these treatments. Graphical simulation and monitoring techniques for treatment delivery have been developed for this purpose. METHODS AND MATERIALS: A graphics-based simulator of the treatment machine and a set of procedures for creating and manipulating treatment delivery scripts are used to simulate machine motions, detect collisions, and monitor machine positions during treatment. The treatment delivery simulator is composed of four components: a three-dimensional dynamic model of the treatment machine; a motion simulation and collision detection algorithm, user-interface widgets that mimic the treatment machine's control and readout devices; and an icon-based interface for creating and manipulating treatment delivery scripts. These components are used in a stand-alone fashion for interactive treatment delivery planning and integrated with a machine control system for treatment implementation and monitoring. RESULTS: A graphics-based treatment delivery simulator and a set of procedures for planning and monitoring computer-controlled treatment delivery have been developed and implemented as part of a comprehensive computer-controlled conformal radiotherapy system. To date, these techniques have been used to design and help monitor computer-controlled treatments on a radiotherapy machine for more than 200 patients. Examples using these techniques for treatment delivery planning and on-line monitoring of machine motions during therapy are described. CONCLUSION: A system that provides interactive graphics-based tools for defining the sequence of machine motions, simulating treatment delivery including collision detection, and presenting the therapists with continual visual feedback from the treatment machine has been successfully implemented for routine clinical use as part of an overall system for computer-controlled conformal radiotherapy treatment, and is considered a necessary part of the routine treatment methodology.

A computer-controlled conformal radiotherapy system. IV: Electronic chart.

PURPOSE: The design and implementation of a system for electronically tracking relevant plan, prescription, and treatment data for computer-controlled conformal radiation therapy is described. METHODS AND MATERIALS: The electronic charting system is implemented on a computer cluster coupled by high-speed networks to computer-controlled therapy machines. A methodical approach to the specification and design of an integrated solution has been used in developing the system. The electronic chart system is designed to allow identification and access of patient-specific data including treatment-planning data, treatment prescription information, and charting of doses. An in-house developed database system is used to provide an integrated approach to the database requirements of the design. A hierarchy of databases is used for both centralization and distribution of the treatment data for specific treatment machines. RESULTS: The basic electronic database system has been implemented and has been in use since July 1993. The system has been used to download and manage treatment data on all patients treated on our first fully computer-controlled treatment machine. To date, electronic dose charting functions have not been fully implemented clinically, requiring the continued use of paper charting for dose tracking. CONCLUSIONS: The routine clinical application of complex computer-controlled conformal treatment procedures requires the management of large quantities of information for describing and tracking treatments. An integrated and comprehensive approach to this problem has led to a full electronic chart for conformal radiation therapy treatments.

Mechanical and dosimetric quality control for computer controlled radiotherapy treatment equipment.

Modern computer controlled radiotherapy treatment equipment offers the possibility of delivering complex, multiple field treatments with minimal operator intervention, thus making multiple field conformal therapy practical. Conventional quality control programs are inadequate for this new technology, so new quality control procedures are needed. A reasonably fast, sensitive, and complete daily quality control program has been developed in our clinic that includes nearly automated mechanical as well as dosimetric tests. Automated delivery of these quality control fields is performed by the control system of the MM50 racetrack microtron, directed by the CCRS sequence processor [D. L. McShan and B. A. Fraass, Proceedings of the XIth International Conference on the use of computers in Radiation Therapy, 20-24 March 1994, Manchester, U.K. (North Western Medical Physics Department, Manchester, U.K., 1994), pp. 210-211], which controls the treatment process. The mechanical tests involve multiple irradiations of a single film to check the accuracy and reproducibility of the computer controlled setup of gantry and collimator angles, table orientation, collimator jaws, and multileaf collimator shape. The dosimetric tests, which involve multiple irradiations of an array of ionization chambers in a commercial dose detector (Keithly model 90100 Tracker System) rigidly attached to the head of the treatment gantry, check the output and symmetry of the treatment unit as a function of gantry and collimator angle and other parameters. For each of the dosimetric tests, readings from the five ionization chambers are automatically read out, stored, and analyzed by the computer, along with the geometric parameters of the treatment unit for that beam.(ABSTRACT TRUNCATED AT 250 WORDS)

Expanding the use and effectiveness of dose-volume histograms for 3-D treatment planning. I: Integration of 3-D dose-display.

PURPOSE: A technique is presented for overcoming a major deficiency of histogram analysis in three-dimensional (3-D) radiotherapy treatment planning; the lack of spatial information. METHODS AND MATERIALS: In this technique, histogram data and anatomic images are displayed in a side-by-side fashion. The histogram curve is used as a guide to interactively probe the nature of the corresponding 3-D dose distribution. Regions of dose that contribute to a specific dose bin or range of bins are interactively highlighted on the anatomic display as a window-style cursor is positioned along the dose-axis of the histogram display. This dose range highlighting can be applied to two-dimensional (2-D) images and to 3-D views which contain anatomic surfaces, multimodality image data, and representations of radiation beams and beam modifiers. Additionally, as a range of histogram bins is specified, dose and volume statistics for the range are continually updated and displayed. RESULTS: The implementation of these techniques is presented and their use illustrated for a nonaxial three field treatment of a hepatic tumor. CONCLUSION: By integrating displays of 3-D doses and the corresponding histogram data, it is possible to recover the positional information inherently lost in the calculation of a histogram. Important questions such as the size and location of hot spots in normal tissues and cold spots within target volumes can be more easily uncovered, making the iterative improvement of treatment plans more efficient.

Simplified method for three-dimensional evaluation of interstitial brachytherapy applications.

Although three-dimensional (3-D) treatment planning has primarily been used for external beam radiation therapy, the advantages of 3-D treatment planning can be realized for brachytherapy applications. As with teletherapy, the use of 3-D treatment planning for brachytherapy can provide both superior dose distribution as well as detailed evaluations of the relationship of dose and volume in critical structures and target tissues. Conventional 3-D treatment planning uses computed tomography (CT) scans to localize structures; however, localizing individual brachytherapy sources on each CT slice can be impractical for routine clinical use. In the transition from two-dimensional to 3-D localization and dose evaluation of interstitial perineal templates in particular, a practical method of seed localization on a postimplant CT dataset has been developed. This method does not utilize dummy sources and, as such, does not require individual seed locations to be identified. Instead, the position of the afterloading catheter is defined as a reference line by connecting its location as seen on the axial CT slices and seed locations defined along its length. Full volumetric calculations can then be performed, including dose-volume histograms (DVH) for critical organs and tumor volumes. Source localization and normal tissue doses were calculated using both orthogonal films and the 3-D method for a series of perineal template guided implants. Point dose calculations of the rectum and bladder were obtained from orthogonal films and were then compared to the corresponding DVHs for these organs.

Dosimetric verification of a 3-D electron pencil beam dose calculation algorithm.

A three-dimensional electron beam dose calculational algorithm implemented for use in a three-dimensional treatment planning system is described. The 3-D electron beam calculations have been in use clinically for more than seven years. The algorithm uses a pencil beam model based on small angle multiple Coulomb scattering theory. Our implementation allows volumetric CT-based inhomogeneity corrections and provides for irregular field shapes (fields shaped with cerrobend cutouts) and the use of bolus. As part of NCI-funded work evaluating the state of the art in electron beam treatment planning, extensive algorithm verification was undertaken and results of these tests for our implementation are presented.

Three-dimensional treatment planning of intracavitary gynecologic implants: analysis of ten cases and implications for dose specification.

PURPOSE: Results of 3-dimensional treatment planning for ten intracavitary gynecologic implants and implications for dose specification are presented. METHODS AND MATERIALS: Using a computed tomographic (CT) compatible intracavitary applicator we have performed CT scans during gynecologic brachytherapy in 10 cases. A CT-based treatment planning system with 3-dimensional capabilities was used to calculate and display dose in three dimensions. Conventional point doses including the estimated bladder and rectal maximum doses and dose to Point A were acquired from orthogonal simulation films. CT maximum bladder and rectal doses and minimum cervix doses were ascertained from isodose lines displayed on individual CT images. Dose volume histograms for the bladder, rectum and cervix were generated and used to obtain volume of the cervix target volume receiving less than the prescribed dose and the volume of bladder and rectum receiving more than the orthogonal maximum doses. The 5 cc volume of bladder and rectum receiving the highest dose were also calculated. RESULTS: Average values of CT point doses and volumes are compared with the traditionally obtained doses. As demonstrated by others, much higher bladder and rectal doses are found using the CT information. The minimum dose to the cervix target volume is lower than the dose to Point A in each case. CT maximum bladder and rectum and minimum cervix target doses may not be the best index doses to correlate with outcome because of the small volumes receiving the dose. CONCLUSION: We hypothesize that clinically useful bladder, rectal and cervix target volume doses will include volume information which is obtainable with dose volume histogram analysis.