RESUMEN
BACKGROUND: Biodiesel, a renewable diesel fuel that can be created from almost any natural fat or oil, is promoted as a greener and healthier alternative to commercial mineral diesel without the supporting experimental data to back these claims. The aim of this research was to assess the health effects of acute exposure to two types of biodiesel exhaust, or mineral diesel exhaust or air as a control in mice. Male BALB/c mice were exposed for 2-hrs to diluted exhaust obtained from a diesel engine running on mineral diesel, Tallow biodiesel or Canola biodiesel. A room air exposure group was used as a control. Twenty-four hours after exposure, a variety of respiratory related end point measurements were assessed, including lung function, responsiveness to methacholine and airway and systemic immune responses. RESULTS: Tallow biodiesel exhaust exposure resulted in the greatest number of significant effects compared to Air controls, including increased airway hyperresponsiveness (178.1 ± 31.3% increase from saline for Tallow biodiesel exhaust exposed mice compared to 155.8 ± 19.1 for Air control), increased airway inflammation (63463 ± 13497 cells/mL in the bronchoalveolar lavage of Tallow biodiesel exhaust exposed mice compared to 40561 ± 11800 for Air exposed controls) and indications of immune dysregulation. In contrast, exposure to Canola biodiesel exhaust resulted in fewer significant effects compared to Air controls with a slight increase in airway resistance at functional residual capacity and indications of immune dysregulation. Exposure to mineral diesel exhaust resulted in significant effects between that of the two biodiesels with increased airway hyperresponsiveness and indications of immune dysregulation. CONCLUSION: These data show that a single, brief exposure to biodiesel exhaust can result in negative health impacts in a mouse model, and that the biological effects of exposure change depending on the feedstock used to make the biodiesel.
Asunto(s)
Biocombustibles , Ratones Endogámicos BALB C , Emisiones de Vehículos , Animales , Emisiones de Vehículos/toxicidad , Biocombustibles/toxicidad , Ratones , Masculino , Gasolina/toxicidad , Contaminantes Atmosféricos/toxicidad , Pulmón/efectos de los fármacos , Líquido del Lavado Bronquioalveolar/química , Exposición por InhalaciónRESUMEN
Biodiesel, which can be made from a variety of natural oils, is currently promoted as a sustainable, healthier replacement for commercial mineral diesel despite little experimental data supporting this. The aim of our research was to investigate the health impacts of exposure to exhaust generated by the combustion of diesel and two different biodiesels. Male BALB/c mice (n = 24 per group) were exposed for 2 h/day for 8 days to diluted exhaust from a diesel engine running on ultra-low sulfur diesel (ULSD) or Tallow or Canola biodiesel, with room air exposures used as control. A variety of respiratory-related end-point measurements were assessed, including lung function, responsiveness to methacholine, airway inflammation and cytokine response, and airway morphometry. Exposure to Tallow biodiesel exhaust resulted in the most significant health impacts compared to Air controls, including increased airway hyperresponsiveness and airway inflammation. In contrast, exposure to Canola biodiesel exhaust resulted in fewer negative health effects. Exposure to ULSD resulted in health impacts between those of the two biodiesels. The health effects of biodiesel exhaust exposure vary depending on the feedstock used to make the fuel.
Asunto(s)
Contaminantes Atmosféricos , Masculino , Ratones , Animales , Contaminantes Atmosféricos/toxicidad , Contaminantes Atmosféricos/análisis , Biocombustibles/toxicidad , Biocombustibles/análisis , Material Particulado/toxicidad , Material Particulado/análisis , Emisiones de Vehículos/toxicidad , Emisiones de Vehículos/análisis , Azufre , InflamaciónRESUMEN
To address climate change concerns, and reduce the carbon footprint caused by fossil fuel use, it is likely that blend ratios of renewable biodiesel with commercial mineral diesel fuel will steadily increase, resulting in biodiesel use becoming more widespread. Exhaust toxicity of unblended biodiesels changes depending on feedstock type, however the effect of feedstock on blended fuels is less well known. The aim of this study was to assess the impact of biodiesel feedstock on exhaust toxicity of 20% blended biodiesel fuels (B20). Primary human airway epithelial cells were exposed to exhaust diluted 1/15 with air from an engine running on conventional ultra-low sulfur diesel (ULSD) or 20% blends of soy, canola, waste cooking oil (WCO), tallow, palm or cottonseed biodiesel in diesel. Physico-chemical exhaust properties were compared between fuels and the post-exposure effect of exhaust on cellular viability and media release was assessed 24 h later. Exhaust properties changed significantly between all fuels with cottonseed B20 being the most different to both ULSD and its respective unblended biodiesel. Exposure to palm B20 resulted in significantly decreased cellular viability (96.3 ± 1.7%; p < 0.01) whereas exposure to soy B20 generated the greatest number of changes in mediator release (including IL-6, IL-8 and TNF-α, p < 0.05) when compared to air exposed controls, with palm B20 and tallow B20 closely following. In contrast, canola B20 and WCO B20 were the least toxic with only mediators G-CSF and TNF-α being significantly increased. Therefore, exposure to palm B20, soy B20 and tallow B20 were found to be the most toxic and exposure to canola B20 and WCO B20 the least. The top three most toxic and the bottom three least toxic B20 fuels are consistent with their unblended counterparts, suggesting that feedstock type greatly impacts exhaust toxicity, even when biodiesel only comprises 20% of the fuel.
Asunto(s)
Biocombustibles , Material Particulado , Humanos , Biocombustibles/toxicidad , Biocombustibles/análisis , Material Particulado/análisis , Factor de Necrosis Tumoral alfa , Aceite de Semillas de Algodón , Emisiones de Vehículos/toxicidad , Emisiones de Vehículos/análisis , Gasolina/toxicidad , MineralesRESUMEN
Biodiesel is created through the transesterification of fats/oils and its usage is increasing worldwide as global warming concerns increase. Biodiesel fuel properties change depending on the feedstock used to create it. The aim of this study was to assess the different toxicological properties of biodiesel exhausts created from different feedstocks using a complex 3D air-liquid interface (ALI) model that mimics the human airway. Primary human airway epithelial cells were grown at ALI until full differentiation was achieved. Cells were then exposed to 1/20 diluted exhaust from an engine running on Diesel (ULSD), pure or 20% blended Canola biodiesel and pure or 20% blended Tallow biodiesel, or Air for control. Exhaust was analysed for various physio-chemical properties and 24-h after exposure, ALI cultures were assessed for permeability, protein release and mediator response. All measured exhaust components were within industry safety standards. ULSD contained the highest concentrations of various combustion gases. We found no differences in terms of particle characteristics for any of the tested exhausts, likely due to the high dilution used. Exposure to Tallow B100 and B20 induced increased permeability in the ALI culture and the greatest increase in mediator response in both the apical and basal compartments. In contrast, Canola B100 and B20 did not impact permeability and induced the smallest mediator response. All exhausts but Canola B20 induced increased protein release, indicating epithelial damage. Despite the concentrations of all exhausts used in this study meeting industry safety regulations, we found significant toxic effects. Tallow biodiesel was found to be the most toxic of the tested fuels and Canola the least, both for blended and pure biodiesel fuels. This suggests that the feedstock biodiesel is made from is crucial for the resulting health effects of exhaust exposure, even when not comprising the majority of fuel composition.
Asunto(s)
Contaminantes Atmosféricos , Biocombustibles , Contaminantes Atmosféricos/análisis , Contaminantes Atmosféricos/toxicidad , Biocombustibles/análisis , Biocombustibles/toxicidad , Células Epiteliales , Gasolina/análisis , Humanos , Material Particulado/análisis , Emisiones de Vehículos/análisis , Emisiones de Vehículos/toxicidadRESUMEN
OBJECTIVES: To assess the chemical composition of electronic cigarette liquids (e-liquids) sold in Australia, in both their fresh and aged forms. DESIGN, SETTING: Gas chromatography-mass spectrometry analysis of commercial e-liquids sold in Australia (online and physical stores). MAIN OUTCOME MEASURES: Chemical composition of 65 Australian e-liquids - excipients/solvents, flavouring chemicals, other known e-liquid constituents (including nicotine), and polycyclic aromatic hydrocarbons - before and after an accelerated ageing process that simulated the effects of vaping. RESULTS: The measured levels of propylene glycol and glycerol often diverged from those recorded on the e-liquid label. All e-liquids contained one or more potentially harmful chemicals, including benzaldehyde, menthol, trans-cinnamaldehyde, and polycyclic aromatic hydrocarbons. Nicotine or nicotyrine were detected in a small proportion of e-liquids at extremely low concentrations. CONCLUSIONS: Australian e-liquids contain a wide variety of chemicals for which information on inhalation toxicity is not available. Further analyses are required to assess the potential long term effects of e-cigarette use on health.
Asunto(s)
Sistemas Electrónicos de Liberación de Nicotina/normas , Etiquetado de Productos/normas , Acroleína/análogos & derivados , Acroleína/análisis , Acroleína/normas , Administración por Inhalación , Australia , Aromatizantes/análisis , Aromatizantes/normas , Cromatografía de Gases y Espectrometría de Masas , Nicotina/análisis , Nicotina/normas , Hidrocarburos Policíclicos Aromáticos/análisis , Hidrocarburos Policíclicos Aromáticos/normas , Propilenglicol/análisis , Propilenglicol/normasRESUMEN
The method outlined in this article is a customization of the whole exhaust exposure method generated by Mullins et al. (2016) using reprogrammed primary human airway epithelial cells as described by Martinovich et al. (2017). It has been used successfully to generate recently published data (Landwehr et al. 2021). The goal was to generate an exhaust exposure model where exhaust is collected from a modern engine, real-world exhaust concentrations are used and relevant tissues exposed to assess the effects of multiple biodiesel exposures. Exhaust was generated, gently vacuumed into a dilution chamber where it was diluted 1/15 with air and then vacuumed into an incubator containing the primary cell cultures for exposure. Exhaust physico-chemical properties including combustion gas concentrations and particle spectra were then analyzed using a combustion gas analyzer and a Universal Scanning Mobility Particle Sizer. 24 h after exposure, cellular viability and mediator release were measured using Annexin-V/PI staining and meditator multiplexing kits respectively. This method was generated to test biodiesel exhaust exposures but can be easily adapted for any type of engine exhaust exposure or even potentially other respirable environmental exposures such as woodsmoke. The main customization points for this method are:â¢Exhaust generated by a diesel engine equipped with EURO VI exhaust after treatment devices including diesel particulate filter and diesel oxidation catalyst.â¢The generated exhaust was diluted 1/15 with air to replicate real world exposure concentrations.â¢Used primary human airway epithelial cells obtained from bronchoscope brushings from multiple volunteers and reprogrammed to allow multiple, comparative exposures from the same individual.
RESUMEN
BACKGROUND: Biodiesel is promoted as a sustainable replacement for commercial diesel. Biodiesel fuel and exhaust properties change depending on the base feedstock oil/fat used during creation. The aims of this study were, for the first time, to compare the exhaust exposure health impacts of a wide range of biodiesels made from different feedstocks and relate these effects with the corresponding exhaust characteristics. METHOD: Primary airway epithelial cells were exposed to diluted exhaust from an engine running on conventional diesel and biodiesel made from Soy, Canola, Waste Cooking Oil, Tallow, Palm and Cottonseed. Exhaust properties and cellular viability and mediator release were analysed post exposure. RESULTS: The exhaust physico-chemistry of Tallow biodiesel was the most different to diesel as well as the most toxic, with exposure resulting in significantly decreased cellular viability (95.8 ± 6.5%) and increased release of several immune mediators including IL-6 (+223.11 ± 368.83 pg/mL) and IL-8 (+1516.17 ± 2908.79 pg/mL) above Air controls. In contrast Canola biodiesel was the least toxic with exposure only increasing TNF-α (4.91 ± 8.61). CONCLUSION: This study, which investigated the toxic effects for the largest range of biodiesels, shows that exposure to different exhausts results in a spectrum of toxic effects in vitro when combusted under identical conditions.
Asunto(s)
Contaminantes Atmosféricos , Biocombustibles , Células Epiteliales/efectos de los fármacos , Emisiones de Vehículos/toxicidad , Contaminantes Atmosféricos/análisis , Biocombustibles/toxicidad , Células Cultivadas , Culinaria , Gasolina , HumanosRESUMEN
BACKGROUND: Agricultural farmworkers are routinely exposed to high levels of airborne dust particles that have been linked to adverse health outcomes. METHODS: This study measured personal and environmental exposures to dust particulates by farmworkers during harvesting activities. Farmers completed a workplace survey with regards to their health and safety awareness and practices and researchers observed general farm safety practices on selected farms using a checklist. RESULTS: In this study, farmers were noted to commonly work extended hours and shifts during harvest due to rigid timing deadlines. Results showed that 40% of farmers were exposed to concentrations of inhalable particles greater than SafeWork Australia's workplace exposure standards for grain dusts, assuming a 16 h working day over 5 shifts. Twenty-two percent were exposed to concentrations that were above the adjusted standard for 12 h shifts. Survey results showed that three-quarters of farm owners provided new workers with some type of induction related to farm safety, however this was mostly undertaken in an arbitrary manner. Despite noting that farming was a dusty occupation and reporting to use protective measures to reduce harmful dust exposures, no workers were observed to wear respiratory protection when working outside of the protection of a vehicle cabin. CONCLUSION: This study identified substantial gaps in health and safety knowledge among farm managers and workers, and improved education and training are highly recommended.
Asunto(s)
Contaminantes Ocupacionales del Aire/efectos adversos , Contaminantes Ocupacionales del Aire/análisis , Producción de Cultivos , Polvo/análisis , Agricultores/estadística & datos numéricos , Exposición Profesional/efectos adversos , Exposición Profesional/estadística & datos numéricos , Triticum , Adulto , Anciano , Femenino , Humanos , Masculino , Persona de Mediana Edad , Encuestas y Cuestionarios , Australia OccidentalRESUMEN
As global biodiesel production increases, there are concerns over the potential health impact of exposure to the exhaust, particularly in regard to young children who are at high risk because of their continuing lung development. Using human airway epithelial cells obtained from young children, we compared the effects of exposure to exhaust generated by a diesel engine with Euro V/VI emission controls running on conventional diesel (ultra-low-sulfur mineral diesel, ULSD), soy biodiesel (B100), or a 20% blend of soy biodiesel with diesel (B20). The exhaust output of biodiesel was found to contain significantly more respiratory irritants, including NOx, CO, and CO2, and a larger overall particle mass. Exposure to biodiesel exhaust resulted in significantly greater cell death and a greater release of immune mediators compared to both air controls and ULSD exhaust. These results have concerning implications for potential global health impacts, particularly for the pediatric population.
Asunto(s)
Contaminantes Atmosféricos , Emisiones de Vehículos , Biocombustibles , Niño , Preescolar , Células Epiteliales , Gasolina , Humanos , Minerales , Material ParticuladoRESUMEN
Noise presents an ongoing occupational health and safety issue, which despite numerous studies still presents a significant risk in agriculture with high exposures prevalent. In this study, we measured noise exposures associated with significant activities on 42 mixed grain and livestock farms in Western Australia. Employing a mixture of personal noise measurements using dosimeters, noise measurements using sound level meters, and a validated survey, we identified that 32% of farm workers were exposed to noise levels above the LAeq,8h 85 dB(A) limit, before considering extended shifts. We also noted that extended shift lengths, of up to 16 h in some cases, were possible. In addition, we found that 37% of workers were exposed to noise peak of 140 dB(C) or greater. It was further noted that hearing protection is not typically worn for the duration of an activity and is only for a small number of tasks. However we did find some evidence that farmers had begun to implement some form of noise management practice, usually in the form of buying quieter equipment or separating noisy tasks from quiet tasks. Improved education for farmer and farm workers in terms of the risks posed by noise, identifying noisy tasks, is recommended, as well as a programme to encourage better and consistent use of hearing protection.
Asunto(s)
Agricultura , Granjas , Ruido en el Ambiente de Trabajo , Exposición Profesional/análisis , Humanos , Salud Laboral , Australia OccidentalRESUMEN
Agricultural operations routinely expose farm workers to high levels of soil dust and other airborne particulate matter that have been linked to adverse health outcomes. The main objective of this study was to investigate exposure to agricultural dust during seeding operations of Western Australian farm workers. Twenty-one wheat-belt farms were recruited to participate in the study. Data were collected over the 6-week seeding period of April-June 2014. Each farm was visited once, and workers were asked to complete a workplace survey that asked questions related to minimizing exposure to agricultural dusts and occupational health and safety issues on their farm. Farmers were also asked to simultaneously participate in monitoring of personal exposure to inhalable or respirable dust along with real-time monitoring for particulate air pollution in their tractor cabin. Sampling was undertaken for 4 hr. The results showed that, on average, Western Australian farmers were exposed to personal respirable dust concentrations above the Australian Institute of Occupational Hygienists recommended guideline values, with some farmers being exposed to concentrations up to seven times higher than the value for respirable dusts. In comparison, in-cabin dust concentrations were lower, although some individual tractors recorded intermittently higher levels, which might be attributed to the type of work activity or process being undertaken. Remaining in tractor cabins with closed doors and windows with properly maintained seals might minimize the infiltration of hazardous dusts and may provide some protection from dust exposures. Future research should focus on educating and providing farm owners and workers with more information on adopting work processes and procedures related to minimizing harmful exposures to agricultural dusts.
Asunto(s)
Polvo/análisis , Agricultores , Exposición Profesional/análisis , Adulto , Producción de Cultivos/métodos , Humanos , Exposición por Inhalación/análisis , Persona de Mediana Edad , Vehículos a Motor , Material Particulado/análisis , Encuestas y Cuestionarios , Triticum , Australia OccidentalRESUMEN
This work examines the ejection of droplets from a bursting gas bubble on a free liquid surface, both experimentally and numerically. We explore the physical processes which govern the bursting of bubbles and the subsequent formation of "jet" droplets. We present new relationships regarding the dependence of jet drop formation on bubble diameter. Furthermore, we propose a new dimensionless parameter to describe the region of properties where "jet" drops will occur. This parameter, termed the droplet number ( Dn), complements existing parameters defining jet drop formation, namely, a maximum Ohnesorge number and a maximum Bond number.
RESUMEN
This review briefly introduces current status of indoor and ambient air pollution originating from household coal and biomass combustion in mainland China. Owing to low combustion efficiency, emissions of CO, PM2.5, black carbon (BC), and polycyclic aromatic hydrocarbons have significant adverse consequences for indoor and ambient air qualities, resulting in relative contributions of more than one-third in all anthropogenic emissions. Their contributions are higher in less economically developed regions, such as Guizhou (61% PM2.5, 80% BC), than that in more developed regions, such as Shanghai (4% PM2.5, 17% BC). Chimneys can reduce ~80% indoor PM2.5 level when burning dirty solid fuels, such as plant materials. Due to spending more time near stoves, housewives suffer much more (~2 times) PM2.5 than the adult men, especially in winter in northern China (~4 times). Improvement of stove combustion/thermal efficiencies and solid fuel quality are the two essential methods to reduce pollutant emissions. PM2.5 and BC emission factors (EFs) have been identified to increase with volatile matter content in traditional stove combustion. EFs of dirty fuels are two orders higher than that of clean ones. Switching to clean ones, such as semi-coke briquette, was identified to be a feasible path for reducing >90% PM2.5 and BC emissions. Otherwise, improvement of thermal and combustion efficiencies by using under-fire technology can reduce ~50% CO2, 87% NH3, and 80% PM2.5 and BC emissions regardless of volatile matter content in solid fuel. However, there are still some knowledge gaps, such as, inventory for the temporal impact of household combustion on air quality, statistic data for deployed clean solid fuels and advanced stoves, and the effect of socioeconomic development. Additionally, further technology research for reducing air pollution emissions is urgently needed, especially low cost and clean stove when burning any type of solid fuel. Furthermore, emission-abatement oriented policy should base on sound scientific evidence to significantly reduce pollutant emissions.
RESUMEN
Increasing use of biodiesel has prompted research into the potential health effects of biodiesel exhaust exposure. Few studies directly compare the health consequences of mineral diesel, biodiesel, or blend exhaust exposures. Here, we exposed human epithelial cell cultures to diluted exhaust generated by the combustion of Australian ultralow-sulfur-diesel (ULSD), unprocessed canola oil, 100% canola biodiesel (B100), and a blend of 20% canola biodiesel mixed with 80% ULSD. The physicochemical characteristics of the exhaust were assessed and we compared cellular viability, apoptosis, and levels of interleukin (IL)-6, IL-8, and Regulated on Activation, Normal T cell Expressed and Secreted (RANTES) in exposed cultured cells. Different fuel types produced significantly different amounts of exhaust gases and different particle characteristics. All exposures resulted in significant apoptosis and loss of viability when compared with control, with an increasing proportion of biodiesel being correlated with a decrease in viability. In most cases, exposure to exhaust resulted in an increase in mediator production, with the greatest increases most often in response to B100. Exposure to pure canola oil (PCO) exhaust did not increase mediator production, but resulted in a significant decrease in IL-8 and RANTES in some cases. Our results show that canola biodiesel exhaust exposure elicits inflammation and reduces viability of human epithelial cell cultures in vitro when compared with ULSD exhaust exposure. This may be related to an increase in particle surface area and number in B100 exhaust when compared with ULSD exhaust. Exposure to PCO exhaust elicited the greatest loss of cellular viability, but virtually no inflammatory response, likely due to an overall increase in average particle size.
Asunto(s)
Apoptosis/efectos de los fármacos , Biocombustibles/análisis , Mediadores de Inflamación/metabolismo , Emisiones de Vehículos/toxicidad , Línea Celular , Supervivencia Celular/efectos de los fármacos , Quimiocina CCL5/metabolismo , Células Epiteliales/citología , Células Epiteliales/efectos de los fármacos , Células Epiteliales/metabolismo , Humanos , Interleucina-6/metabolismo , Interleucina-8/metabolismo , Modelos Lineales , Tamaño de la Partícula , Material Particulado/química , Material Particulado/toxicidadRESUMEN
CONTEXT: Mice are commonly used in studies investigating the effects of diesel exhaust exposure on respiratory health. A plethora of studies in this field has resulted in a range of exposure protocols, from inhalation of diesel exhaust, to the administration (via various routes) of diesel exhaust particles in solution. OBJECTIVE: In this study, we compared the physiological consequences of short-term exposure to diesel exhaust via inhalation to those due to exposure to the same diesel exhaust particles suspended in solution and delivered intranasally. MATERIALS AND METHODS: Adult BALB/c mice were exposed to diesel exhaust via inhalation for 2 hours per day for 8 days. A representative, simultaneous sample of particles was collected and a second group of mice then exposed to them suspended in saline. A low and a high-dose were studied, with these matched based on respiratory parameters. Six and twenty-four hours after the last exposure we measured bronchoalveolar inflammation, lung volume, lung function and the amount of elemental carbon in alveolar macrophages. RESULTS: Exposure via either route elicited pulmonary inflammation and changes in lung function. We identified significant differences in response between the two routes of exposure, with mice exposed via inhalation generally displaying more realistic dose-response relationships. Mice exposed via intranasal instillation responded more variably, with little influence of dose. CONCLUSIONS: Our results suggest that selection of the route of exposure is of critical importance in studies such as this. Further, inhalation exposure, while more methodologically difficult, resulted in responses more akin to those seen in humans.
Asunto(s)
Contaminantes Atmosféricos/toxicidad , Exposición por Inhalación/efectos adversos , Pulmón/efectos de los fármacos , Macrófagos Alveolares/efectos de los fármacos , Neumonía/inducido químicamente , Mucosa Respiratoria/efectos de los fármacos , Emisiones de Vehículos/toxicidad , Administración Intranasal , Animales , Cámaras de Exposición Atmosférica , Líquido del Lavado Bronquioalveolar/química , Líquido del Lavado Bronquioalveolar/inmunología , Relación Dosis-Respuesta a Droga , Femenino , Humanos , Instilación de Medicamentos , Pulmón/inmunología , Pulmón/fisiopatología , Macrófagos Alveolares/química , Macrófagos Alveolares/inmunología , Ratones Endogámicos BALB C , Material Particulado/administración & dosificación , Material Particulado/química , Material Particulado/toxicidad , Neumonía/inmunología , Neumonía/fisiopatología , Reproducibilidad de los Resultados , Pruebas de Función Respiratoria , Mucosa Respiratoria/inmunología , Mucosa Respiratoria/fisiopatología , Pruebas de Toxicidad SubagudaRESUMEN
The well-known phenomena of Plateau-Rayleigh instability has been simulated using computational fluid dynamics (CFD). The breakup of a liquid film into an array of droplets on a cylindrical element was simulated using a volume-of-fluid (VOF) solver and compared to experimental observations and existing theory. It is demonstrated that the VOF method can correctly predict the breakup of thins films into an array of either axisymmetric droplets or clam-shell droplets, depending on the surface energy. The existence of unrealistically large films is precluded. Droplet spacing was found to show reasonable agreement with theory. Droplet motion and displacement under fluid flow was also examined and compared to that in previous studies. It was found that the presence of air flow around the droplet does not influence the stable film thickness; however, it reduces the time required for droplet formation. Novel relationships for droplet displacement were derived from the results.
Asunto(s)
Simulación por Computador , HidrodinámicaRESUMEN
Phobic droplet-fiber systems possess complex geometries, which have made full characterization of such systems difficult. This work has used atomic force microscopy (AFM) to measure droplet-fiber forces for oil droplets on oleophobic fibers over a range of fiber diameters. The work adapted a previous method and a theoretical model developed by the authors for philic droplet-fiber systems. A Bayesian statistical model was also used to account for the influence of surface roughness on the droplet-fiber force. In general, it has been found that the force required to move a liquid droplet along an oleophobic filter fiber will be less than that required to move a droplet along an oleophilic fiber. However, because of the effects of pinning and/or wetting behavior, this difference may be less than would otherwise be expected. Droplets with a greater contact angle (~110°) were observed to roll along the fiber, whereas droplets with a lesser contact angle (<90°) would slide.
RESUMEN
This work presents a theoretical model describing the force required to move a coalesced liquid droplet along an oleophilic filter fiber. Measurements have been made using the atomic force microscope (AFM) to examine these forces over a range of fiber and droplet diameters as well as oil properties. Good agreement between measured and modeled forces was found. The influence of droplet displacement perpendicular to the fiber on the force required to move the droplet has also been determined experimentally and theoretically. It was found that fiber surface inhomogeneities are likely to influence results. This work has also established empirical relationships that can be used to predict the force, based on a known droplet volume, for the liquid types used.