Protonation of Planar and Nonplanar Porphyrins: A Calorimetric and Computational Study.

Herein, we report the first calorimetric study of the protonation of planar and nonplanar free-base porphyrins: H2OETPP (strongly saddled by its substituents), H2T(tBu)P (strongly ruffled by its substituents), and the nominally planar porphyrins (npPs) H2OEP, H2TPP, H2T(nPe)P, and H2T(iPr)P. The observed enthalpies of protonation in solution (ΔHprotsoln) for formation of the dications in 1,1,2,2-tetrachloroethane with 2% trifluoroacetic acid are -45 ± 1 kcal mol-1 for the npPs, -52.0 kcal mol-1 for H2T(tBu)P, and -70.9 kcal mol-1 for H2OETPP. The corresponding enthalpies of protonation (ΔHDFT) obtained from DFT calculations (-27 ± 5, -42, and -63 kcal mol-1, respectively) reproduce this trend. The much more negative enthalpy of protonation seen for H2OETPP is consistent with this molecule being pre-deformed into the saddle structure favored by porphyrin dications. Except for OETPP, the calculated enthalpies of the first protonations (ΔH1) are significantly more positive than the enthalpies of the second protonations (ΔH2). In addition, the structural strain energies for the first protonations (ΔEst(1)) are also significantly more positive than ΔEst(2). According to the calculations, the monocations thus have higher proton affinities than the corresponding free-base porphyrins due to a structural strain effect, which is consistent with the generally elusive nature of the porphyrin monocation. The recent observations of monocations for free-base porphyrins with a high degree of saddling can be rationalized in terms of ΔH1 and ΔH2 being similar; so, the monocation is no longer an unstable intermediate.

Iron(III) Fluorinated Porphyrins: Greener Chemistry from Synthesis to Oxidative Catalysis Reactions.

Iron(III) fluorinated porphyrins play a central role in the biomimetics of heme enzymes and enable cleaner routes to the oxidation of organic compounds. The present work reports significant improvements in the eco-compatibility of the synthesis of 5,10,15,20-tetrakis-pentafluorophenylporphyrin (H2TPFPP) and the corresponding iron complex [Fe(TPFPP)Cl], and the use of [Fe(TPFPP)Cl] as an oxidation catalyst in green conditions. The preparations of H2TPFPP and [Fe(TPFPP)Cl] typically use toxic solvents and can be made significantly greener and simpler using microwave heating and optimization of the reaction conditions. In the optimized procedure it was possible to eliminate nitrobenzene from the porphyrin synthesis and replace DMF by acetonitrile in the metalation reaction, concomitant with a significant reduction of reaction time and simplification of the purification procedure. The Fe(III)porphyrin is then tested as catalyst in the selective oxidation of aromatics at room temperature using a green oxidant (hydrogen peroxide) and green solvent (ethanol). Efficient epoxidation of indene and selective oxidation of 3,5-dimethylphenol and naphthalene to the corresponding quinones is observed.

Interactions of a non-fluorescent fluoroquinolone with biological membrane models: A multi-technique approach.

Fluoroquinolones are antibiotics which act by penetrating into bacterial cells and inhibiting enzymes related to DNA replication, and metal complexes of these drugs have recently been investigated as one approach to counteracting bacterial resistance. In this work, we apply a multi-technique approach to studying the partition coefficient (Kp) for the non-fluorescent third-generation fluoroquinolone sparfloxacin or its copper-complex with lipid membrane models of Gram-negative bacteria. The techniques investigated are UV-vis absorption and (19)F NMR spectroscopies together with quenching of a fluorescent probe present in the lipids (using steady-state and time-resolved methods). (19)F NMR spectroscopy has previously been used to determine the Kp values of fluorinated drugs but in the case of sparfloxacin did not yield useful data. However, similar Kp values for sparfloxacin or its copper-complex were obtained for the absorption and fluorescence quenching methods confirming the usefulness of a multi-technique approach. The Kp values measured for sparfloxacin were significantly higher than those found for other fluoroquinolones. In addition, similar Kp values were found for sparfloxacin and copper-complex suggesting that in contrast to other fluoroquinolones hydrophobic diffusion occurs readily for both of these molecules.

Impact of substituents and nonplanarity on nickel and copper porphyrin electrochemistry: first observation of a Cu(II)/Cu(III) reaction in nonaqueous media.

Electrochemical studies of the oxidation of dodecasubstituted and highly nonplanar nickel porphyrins in a noncoordinating solvent have previously revealed the first nickel(III) porphyrin dication. Herein, we investigate if these nonplanar porphyrins can also be used to detect the so far unobserved copper(III) porphyrin dication. Electrochemical studies of the oxidation of (DPP)Cu and (OETPP)Cu show three processes, the first two of which are macrocycle-centered to give the porphyrin dication followed by a Cu(II)/Cu(III) process at more positive potential. Support for the assignment of the Cu(II)/Cu(III) process comes from the linear relationships observed between E1/2 and the third ionization potential of the central metal ions for iron, cobalt, nickel, and copper complexes of (DPP)M and (OETPP)M. In addition, the oxidation behavior of additional nonplanar nickel porphyrins is investigated in a noncoordinating solvent, with nickel meso-tetraalkylporphyrins also being found to form nickel(III) porphyrin dications. Finally, examination of the nickel meso-tetraalkylporphyrins in a coordinating solvent (pyridine) reveals that the first oxidation becomes metal-centered under these conditions, as was previously noted for a range of nominally planar porphyrins.

Hierarchical cooperative binary ionic porphyrin nanocomposites.

Cooperative binary ionic (CBI) solids comprise a versatile new class of opto-electronic and catalytic materials consisting of ionically self-assembled pairs of organic anions and cations. Herein, we report CBI nanocomposites formed by growing nanoparticles of one type of porphyrin CBI solid onto a second porphyrin CBI substructure with complementary functionality.

Binary ionic porphyrin nanosheets: electronic and light-harvesting properties regulated by crystal structure.

Crystalline solids self-assembled from anionic and cationic porphyrins provide a new class of multifunctional optoelectronic micro- and nanomaterials. A 1 : 1 combination of zinc(II) tetra(4-sulfonatophenyl)porphyrin (ZnTPPS) and tin(IV) tetra(N-methyl-4-pyridiniumyl)porphyrin (SnTNMePyP) gives porphyrin nanosheets with high aspect ratios and varying thickness. The room temperature preparation of the nanosheets has provided the first X-ray crystal structure of a cooperative binary ionic (CBI) solid. The unit cell contains one and one-half molecules of aquo-ZnTPPS(4-) (an electron donor) and three half molecules of dihydroxy-SnTNMePyP(4+) (an electron acceptor). Charge balance in the solid is reached without any non-porphyrinic ions, as previously determined for other CBI nanomaterials by non-crystallographic means. The crystal structure reveals a complicated molecular arrangement with slipped π-π stacking only occurring in isolated dimers of one of the symmetrically unique zinc porphyrins. Consistent with the crystal structure, UV-visible J-aggregate bands indicative of exciton delocalization and extended π-π stacking are not observed. XRD measurements show that the structure of the Zn/Sn nanosheets is distinct from that of Zn/Sn four-leaf clover-like CBI solids reported previously. In contrast with the Zn/Sn clovers that do exhibit J-aggregate bands and are photoconductive, the nanosheets are not photoconductive. Even so, the nanosheets act as light-harvesting structures in an artificial photosynthesis system capable of reducing water to hydrogen but not as efficiently as the Zn/Sn clovers.

Morphological families of self-assembled porphyrin structures and their photosensitization of hydrogen generation.

Varying the solution growth conditions of cooperative binary ionic solids composed of anionic and cationic metalloporphyrins produces a series of families of self-assembled structures that efficiently and durably photosensitize the evolution of hydrogen.

Templated growth of platinum nanowheels using the inhomogeneous reaction environment of bicelles.

Novel platinum nanowheels were synthesized by the reduction of aqueous platinum complex with ascorbic acid in the presence of disk-like bicelles. The platinum nanowheels possess thickened centers and flared edges that are connected by dendritic platinum nanosheets. This structural complexity can be attributed to the inhomogeneous micro-environment of the templating bicelles consisting of a central bi-layer region and a high curvature rim. The formation mechanism of the nanowheels was investigated by imaging nanostructures at different stages of the reaction. The templating bicelles were also imaged by TEM with the aid of negative staining. The variation of reaction parameters including platinum concentration, temperature, and total concentration of surfactants (CTAB + FC7) led to other types of platinum nanostructures, such as circular dendritic nanosheets with a tunable diameter and rectangular dendritic nanosheets. Interestingly, under irradiation by a TEM electron beam, the dendritic nanosheet portion of the nanowheels transforms into a metastable holey sheet. In addition, the platinum nanowheels have an electrochemical active surface area comparable to that of ETEK platinum black and thus are expected to have potential applications in catalysis.

Donor-acceptor biomorphs from the ionic self-assembly of porphyrins.

Microscale four-leaf clover-shaped structures are formed by self-assembly of anionic and cationic porphyrins. Depending on the metal complexed in the porphyrin macrocycle (Zn or Sn), the porphyrin cores are either electron donors or electron acceptors. All four combinations of these two metals in cationic tetra(N-ethanol-4-pyridinium)porphyrin and anionic tetra(sulfonatophenyl)porphyrin result in related cloverlike structures with similar crystalline packing indicated by X-ray diffraction patterns. The clover morphology transforms as the ionic strength and temperature of the self-assembly reaction are increased, but the structures maintain 4-fold symmetry. The ability to alter the electronic and photophysical properties of these solids (e.g., by altering the metals in the porphyrins) and to vary cooperative interactions between the porphyrin subunits raises the possibility of producing binary solids with tunable functionality. For example, we show that the clovers derived from anionic Zn porphyrins (electron donors) and cationic Sn porphyrins (electron acceptors) are photoconductors, but when the metals are reversed in the two porphyrins, the resulting clovers are insulators.

Molecular organization in self-assembled binary porphyrin nanotubes revealed by resonance Raman spectroscopy.

Porphyrin nanotubes were formed by the ionic self-assembly of tetrakis(4-sulfonatophenyl) porphyrin diacid (H(4)TPPS(4)(2-)) and Sn(IV) tetra(4-pyridyl) porphyrin (Sn(OH(-))(X)TPyP(4+/5+) [X = OH(-) or H(2)O]) at pH 2.0. As reported previously, the tubes are hollow as revealed by transmission electron microscopy, approximately 60 nm in diameter, and can be up to several micrometres long. The absorption spectrum of the porphyrin nanotubes presents monomer-like Soret bands, as well as two additional red-shifted bands characteristic of porphyrin J-aggregates (offset face-to-face stacks). To elucidate the origin of the J-aggregate bands and the internal interactions of the porphyrins, the resonance Raman spectra have been obtained for the porphyrin nanotubes with excitations near resonance with the Soret J-aggregate band and the monomer-like bands. The resonance Raman data reveal that the Sn porphyrins are not electronically coupled to the J-aggregates within the tubes, which are formed exclusively by H(4)TPPS(4)(2-). This suggests that the internal structure of the nanotubes has H(4)TPPS(4)(2-) in aggregates that are similar to the widely studied H(4)TPPS(4)(2-) self-aggregates and that are segregated from the Sn porphyrins. Possible internal structures of the nanotubes and mechanisms for their formation are discussed.

Evolution of dendritic platinum nanosheets into ripening-resistant holey sheets.

Under electron-beam irradiation, dendritic platinum nanosheets structurally evolve into metastable "holey" nanosheets. Monte Carlo simulations of this structural transformation agree well with electron microscope images detailing the ripening process. The experiments and simulations show that nanoscale holes of a critical size are persistent and give holey sheets their morphological stability and sustained high surface area. Platinum nanostructures composed of these holey nanosheets exhibit improved durability in electrocatalytic reactions due to their remarkable ripening resistance.

Monodisperse porphyrin nanospheres synthesized by coordination polymerization.

Monodisperse nanospheres are formed by coordination polymerization tetrakis(4-pyridyl)porphyrin-metal complexes with chloroplatinic acid in aqueous solution. The porphyrin nanospheres and their platinized nanocomposites have potential applications in catalysis and solar energy conversion systems.

Ab initio molecular dynamics study of manganese porphine hydration and interaction with nitric oxide.

The authors use ab initio molecular dynamics and the density functional theory+U (DFT+U) method to compute the hydration environment of the manganese ion in manganese (II) and manganese (III) porphines (MnP) dispersed in liquid water. These are intended as simple models for more complex water soluble porphyrins, which have important physiological and electrochemical applications. The manganese ion in Mn(II)P exhibits significant out-of-porphine plane displacement and binds strongly to a single H2O molecule in liquid water. The Mn in Mn(III)P is on average coplanar with the porphine plane and forms a stable complex with two H2O molecules. The residence times of these water molecules exceed 15 ps. The DFT+U method correctly predicts that water displaces NO from Mn(III)P-NO, but yields an ambiguous spin state for the MnP(II)-NO complex.

Interfacial synthesis of dendritic platinum nanoshells templated on benzene nanodroplets stabilized in water by a photocatalytic lipoporphyrin.

Nanoscale metal shells have many potential uses and in some applications offer significant advantages over nanoparticles. The synthesis of platinum nanoshells using stabilized nanodroplets of benzene in water as growth templates is described; the nanodroplets are stabilized by a surfactant-like tin(IV)-porphyrin complex localized at the benzene-water interface. The porphyrin also acts as a photocatalyst that reduces the platinum complex and deposits metal onto the nanodroplets to form dendritic metal nanoshells. Below the solubility limit of benzene in water, the lipoporphyrin-stabilized nanodroplets have a reproducible number, size distribution, and surface area, which allows the thickness of the platinum shell walls to be controlled by changing the amount of platinum complex. Nanoscale platinum shells with magnetic interiors can be made by dispersing Fe3O4 nanoparticles in the benzene nanodroplets.

Density functional theory and DFT+U study of transition metal porphines adsorbed on Au(111) surfaces and effects of applied electric fields.

We apply density functional theory (DFT) and the DFT+U technique to study the adsorption of transition metal porphine molecules on atomistically flat Au(111) surfaces. DFT calculations using the Perdew-Burke-Ernzerhof exchange correlation functional correctly predict the palladium porphine (PdP) low-spin ground state. PdP is found to adsorb preferentially on gold in a flat geometry, not in an edgewise geometry, in qualitative agreement with experiments on substituted porphyrins. It exhibits no covalent bonding to Au(111), and the binding energy is a small fraction of an electronvolt. The DFT+U technique, parametrized to B3LYP-predicted spin state ordering of the Mn d-electrons, is found to be crucial for reproducing the correct magnetic moment and geometry of the isolated manganese porphine (MnP) molecule. Adsorption of Mn(II)P on Au(111) substantially alters the Mn ion spin state. Its interaction with the gold substrate is stronger and more site-specific than that of PdP. The binding can be partially reversed by applying an electric potential, which leads to significant changes in the electronic and magnetic properties of adsorbed MnP and approximately 0.1 A changes in the Mn-nitrogen distances within the porphine macrocycle. We conjecture that this DFT+U approach may be a useful general method for modeling first-row transition metal ion complexes in a condensed-matter setting.

Energetics and structural consequences of axial ligand coordination in nonplanar nickel porphyrins.

The effects of ruffling on the axial ligation properties of a series of nickel(II) tetra(alkyl)porphyrins have been investigated with UV-visible absorption spectroscopy, resonance Raman spectroscopy, X-ray crystallography, classical molecular mechanics calculations, and normal-coordinate structural decomposition analysis. For the modestly nonplanar porphyrins, porphyrin ruffling is found to cause a decrease in binding affinity for pyrrolidine and piperidine, mainly caused by a decrease in the binding constant for addition of the first axial ligand; ligand binding is completely inhibited for the more nonplanar porphyrins. The lowered affinity, resulting from the large energies required to expand the core and flatten the porphyrin to accommodate the large high-spin nickel(II) ion, has implications for nickel porphyrin-based molecular devices and the function of heme proteins and methyl-coenzyme M reductase.

Nonplanar heme deformations and excited state displacements in nickel porphyrins detected by Raman spectroscopy at soret excitation.

We have correlated the Raman intensities of out-of-plane modes of nickel porphyrins with the nonplanar deformations of specific symmetries, i.e., static normal coordinate deformations (SNCDs) expressed in terms of irreducible representations of the unperturbed D(4h) point group. The model porphyrins Ni(II) octaethyltetraphenylporphyrin (NiOETPP), Ni(II) tetra(isopropyl)porphyrin (NiT((i)Pr)P), Ni(II) tetra(tert-butyl)porphyrin (NiT((t)Bu)P), and Ni(II) meso-tetraphenylporphyrin (NiTPP) were chosen because they exhibit significant out-of-plane deformations of different symmetries. At B-band excitation, the Raman scattering of out-of-plane modes becomes activated mostly via the Franck-Condon mechanism. Some characteristic bands from out-of-plane modes in the spectra were identified as reliable predictors of the type and magnitude of out-of-plane deformation. The gamma(10)-gamma(13) bands are indicators of ruffling (B(1u)) deformations for porphyrins, as confirmed by data for NiTPP, NiT((i)Pr)P, and NiT((t)Bu)P, where the Raman intensity increases with the magnitude of the ruffling deformation. The gamma(15)-gamma(17) bands are indicators of saddling (B(2u)) deformations, as shown by data for NiOETPP, which is highly saddled. By comparing the relative intensities of these prominent Raman bands we estimated the vibronic coupling parameters using a self-consistent analysis, and showed that they reproduce the respective B-band absorption profiles. We also identified the deformations along the lowest wavenumber normal coordinates as the predominant reason for the Raman activity of out-of-plane modes. Our results suggest that some of the normal coordinates (gamma(10) and gamma(13)) may be used as tools to quantitatively probe the nonplanar deformations of metalloporphyrins with alkyl substituents at the meso-positions. Out-of-plane deformations also increase the vibronic coupling strength of some low frequency in-plane Raman modes, namely, nu(7) and nu(8). Generally, the Raman data suggest that the excited B-state is substantially more nonplanar than the ground state. The overall larger vibronic coupling of ruffled porphyrins yields substantially larger dipole strengths for the vibronic sidebands associated with the B-state transition, so that the relative absorptivity of the B(v) band can be used as a convenient tool to probe the nonplanarity of the porphyrin macrocycle.

Porphyrin nanotubes by ionic self-assembly.

Porphyrin nanotubes are made by ionic self-assembly of two oppositely charged synthetic porphyrin molecules. The diameter of the nanotubes can be altered by modifying the structure of one of the porphyrin tectons. The nanotubes are photocatalytically active, mechanically responsive to light, and are composed of J-aggregates that exhibit resonance light scattering.

Self-metallization of photocatalytic porphyrin nanotubes.

Porphyrin nanotubes represent a new class of nanostructures for which the molecular building blocks can be altered to control their structural and functional properties. Nanotubes containing tin(IV) porphyrins are photocatalytically active and can reduce metal ions from aqueous solution. The metal is deposited selectively onto tube surfaces, producing novel composite nanostructures that have potential applications as nanodevices. Two examples presented here are nanotubes with a continuous gold wire in the core and a gold ball at the end and nanotubes coated with platinum nanoparticles mainly on their outer surfaces. The latter are capable of photocatalytic reduction of water to hydrogen.