RESUMEN
We here report of a conference about "Pesticides in Soil, Groundwater and Food in Latin America as part of One Health" that took place at the "IV Seminario Internacional de Sanidad Agropecuaria (SISA)" in Varadero, Cuba, 8-12 May 2023. Researchers of Latin America (Argentina, Brazil, Chile, Costa Rica, Colombia, Cuba, Mexico) and Switzerland (workshop initiator) held presentations about occurrence and effects of pesticides on the environment, human health, the replacement of highly hazardous pesticides (HHP) by agroecological alternatives and the agri-food value chain. In a subsequent round table discussion, the presenters identified deficits, needs, interests and opportunities. According to them, the lack of awareness of pesticide use affects the health and safety of workers applying the chemicals. Despite Latin America representing the main agricultural area in the world with a very intense pesticide use, monitoring data of pesticides in soil, surface and groundwaters, food, as well as in humans are missing. Risks of pesticides to humans should be assessed so that authorities can withdraw or limit within "short time" the access to corresponding formulations on the market. Also, communication is not state of the art and should be improved as, e.g. the teaching of workers and farmers, how to correctly use and apply pesticides or the briefing of decision makers. Pollinators suffer from multiple stressors not the least due to pesticides, and alternatives are badly needed. On the technical side, the different analytical methods to determine residues of active ingredients and transformation products in matrices of concern should be harmonized among laboratories.Seven future actions and goals were identified to overcome the above deficits. Next steps after the publishing of this conference report are to harmonize and complete the information status of the presenters by exchanging the results/data already present. Therefore, a platform of interaction to address issues described above and to enhance collaboration shall be created. Samples of different matrices shall be exchanged to harmonize the chemical analysis and establish interlaboratory comparisons. Such activities might be facilitated by joining international associations or organizations, where researchers can offer their expertise, or by forming a new pesticide network for Central and South America that could present tailored projects to national and international organizations and funding agencies.
Asunto(s)
Agua Subterránea , Salud Única , Plaguicidas , Humanos , América Latina , Plaguicidas/análisis , Suelo , BrasilRESUMEN
While there has been significant research conducted on bacterial colonization on implant materials, with a focus on developing surface modifications to prevent the formation of bacterial biofilms, the study of Candida albicans biofilms on implantable materials is still in its infancy, despite its growing relevance in implant-associated infections. C. albicans fungal infections represent a significant clinical concern due to their severity and associated high fatality rate. Pathogenic yeasts account for an increasing proportion of implant-associated infections, since Candida spp. readily form biofilms on medical and dental device surfaces. In addition, these biofilms are highly antifungal-resistant, making it crucial to explore alternative solutions for the prevention of Candida implant-associated infections. One promising approach is to modify the surface properties of the implant, such as the wettability and topography of these substrata, to prevent the initial Candida attachment to the surface. This review summarizes recent research on the effects of surface wettability, roughness, and architecture on Candida spp. attachment to implantable materials. The nanofabrication of material surfaces are highlighted as a potential method for the prevention of Candida spp. attachment and biofilm formation on medical implant materials. Understanding the mechanisms by which Candida spp. attach to surfaces will allow such surfaces to be designed such that the incidence and severity of Candida infections in patients can be significantly reduced. Most importantly, this approach could also substantially reduce the need to use antifungals for the prevention and treatment of these infections, thereby playing a crucial role in minimizing the possibility contributing to instances of antimicrobial resistance. STATEMENT OF SIGNIFICANCE: In this review we provide a systematic analysis of the role that surface characteristics, such as wettability, roughness, topography and architecture, play on the extent of C. albicans cells attachment that will occur on biomaterial surfaces. We show that exploiting bioinspired surfaces could significantly contribute to the prevention of antimicrobial resistance to antifungal and chemical-based preventive measures. By reducing the attachment and growth of C. albicans cells using surface structure approaches, we can decrease the need for antifungals, which are conventionally used to treat such infections.
Asunto(s)
Antifúngicos , Candida albicans , Humanos , Antifúngicos/farmacología , Antifúngicos/química , Biopelículas , Propiedades de Superficie , Materiales Biocompatibles/químicaRESUMEN
Efficiently transforming CO2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds great promise as a hydrogen storage compound due to its high hydrogen density, non-toxicity, and stability under ambient conditions. However, the electrochemical reduction of CO2 (CO2 RR) on conventional carbon black-supported metal catalysts faces challenges such as low stability through dissolution and agglomeration, as well as suffering from high overpotentials and the necessity to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp d z 2 ${{d}_{{z}^{2}}}$ , d y z ${{d}_{yz}}$ , and d x z ${{d}_{xz}}$ orbitals of metals near the Fermi level, playing a decisive role. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO2 reduction to HCOOH, CO, and HER, we find that Pd/G, Pt/G/Ag, and Pt/G/Au exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p-block elements.
RESUMEN
The mechano-bactericidal action of nanostructured surfaces is well-documented; however, synthetic nanostructured surfaces have not yet been explored for their antifungal properties toward filamentous fungal species. In this study, we developed a biomimetic nanostructured surface inspired by dragonfly wings. A high-aspect-ratio nanopillar topography was created on silicon (nano-Si) surfaces using inductively coupled plasma reactive ion etching (ICP RIE). To mimic the superhydrophobic nature of insect wings, the nano-Si was further functionalised with trichloro(1H,1H,2H,2H-perfluorooctyl)silane (PFTS). The viability of Aspergillus brasiliensis spores, in contact with either hydrophobic or hydrophilic nano-Si surfaces, was determined using a combination of standard microbiological assays, confocal laser scanning microscopy (CLSM), and focused ion beam scanning electron microscopy (FIB-SEM). Results indicated the breakdown of the fungal spore membrane upon contact with the hydrophilic nano-Si surfaces. By contrast, hydrophobised nano-Si surfaces prevented the initial attachment of the fungal conidia. Hydrophilic nano-Si surfaces exhibited both antifungal and fungicidal properties toward attached A. brasisiensis spores via a 4-fold reduction of attached spores and approximately 9-fold reduction of viable conidia from initial solution after 24 h compared to their planar Si counterparts. Thus, we reveal, for the first time, the physical rupturing of attaching fungal spores by biomimetic hydrophilic nanostructured surfaces.
Asunto(s)
Odonata , Silicio , Animales , Silicio/farmacología , Silicio/química , Esporas Fúngicas , Biomimética/métodos , Antifúngicos , Propiedades de SuperficieRESUMEN
Atomic force microscopy (AFM) was used to investigate the morphology and rigidity of the opportunistic pathogenic yeast, Candida albicans ATCC 10231, during its attachment to surfaces of three levels of nanoscale surface roughness. Non-polished titanium (npTi), polished titanium (pTi), and glass with respective average surface roughness (Sa) values of 389 nm, 14 nm, and 2 nm, kurtosis (Skur) values of 4, 16, and 4, and skewness (Sskw) values of 1, 4, and 1 were used as representative examples of each type of nanoarchitecture. Thus, npTi and glass surfaces exhibited similar Sskw and Skur values but highly disparate Sa. C. albicans cells that had attached to the pTi surfaces exhibited a twofold increase in rigidity of 364 kPa compared to those yeast cells attached to the surfaces of npTi (164 kPa) and glass (185 kPa). The increased rigidity of the C. albicans cells on pTi was accompanied by a distinct round morphology, condensed F-actin distribution, lack of cortical actin patches, and the negligible production of cell-associated polymeric substances; however, an elevated production of loose extracellular polymeric substances (EPS) was observed. The differences in the physical response of C. albicans cells attached to the three surfaces suggested that the surface nanoarchitecture (characterized by skewness and kurtosis), rather than average surface roughness, could directly influence the rigidity of the C. albicans cells. This work contributes to the next-generation design of antifungal surfaces by exploiting surface architecture to control the extent of biofilm formation undertaken by yeast pathogens and highlights the importance of performing a detailed surface roughness characterization in order to identify and discriminate between the surface characteristics that may influence the extent of cell attachment and the subsequent behavior of the attached cells.
RESUMEN
Graphene oxide quantum dots (GOQDs) hold great promise as a new class of high-performance carbonaceous nanomaterials due to their numerous functional properties, such as tunable photoluminescence (PL), excellent thermal and chemical stability, and superior biocompatibility. In this study, we developed a facile, one-pot, and effective strategy to engineer the interface of GOQDs through covalent doping with silicon. The successful covalent attachment of the silane dopant with pendant vinyl groups to the edges of the GOQDs was confirmed by an in-depth investigation of the structural and morphological characteristics. The Si-GOQD nanoconjugates had an average dimension of â¼8 nm, with a graphite-structured core and amorphous carbon on their shell. We further used the infrared nanoimaging based on scattering-type scanning near-field optical microscopy to unveil the spectral near-field response of GOQD samples and to measure the nanoscale IR response of its network; we then demonstrated their distinct domains with strongly enhanced near fields. The doping of Si atoms into the sp2-hybridized graphitic framework of GOQDs also led to tailored PL emissions. We then sought to explore the potential applications of Si-GOQDs on the surface of plastic films where poly(dimethylsiloxane) (PDMS) served as a bridge to tightly anchor the Si-GOQDs to the surface. The bi-layered coated films which were built with co-assembly of Si-GOQDs and PDMS contributed to suppressing the transmission of water molecules due to the generation of compact and less accessible passing sites, achieving a nearly twofold reduction in water permeability compared to the single-layered coated films. The nanoindentation and PeakForce quantitative nanomechanical mapping showed that Si-GOQD-coated substrates were softer and more deformable than those coated only with PDMS. The co-assembly of PDMS and Si-GOQDs yielded films that were less stiff than those made from PDMS alone. Our findings provided conceptual insights into the importance of nanoscale surface engineering of GOQDs in conferring excellent dispersibility and enhancing the performance of nanocomposite films.
RESUMEN
Microbial resistance to common antibiotics is threatening to cause the next pandemic crisis. In this context, antimicrobial peptides (AMPs) are receiving increased attention as an alternative approach to the traditional small molecule antibiotics. Here, we report the bi-functional rational design of Fmoc-peptides as both antimicrobial and hydrogelator substances. The tetrapeptide Fmoc-WWRR-NH2-termed Priscilicidin-was rationally designed for antimicrobial activity and molecular self-assembly into nanostructured hydrogels. Molecular dynamics simulations predicted Priscilicidin to assemble in water into small oligomers and nanofibrils, through a balance of aromatic stacking, amphiphilicity and electrostatic repulsion. Antimicrobial activity prediction databases supported a strong antimicrobial motif via sequence analogy. Experimentally, this ultrashort sequence showed a remarkable hydrogel forming capacity, combined to a potent antibacterial and antifungal activity, including against multidrug resistant strains. Using a set of biophysical and microbiology techniques, the peptide was shown to self-assemble into viscoelastic hydrogels, as a result of assembly into nanostructured hexagonal mesophases. To further test the molecular design approach, the Priscilicidin sequence was modified to include a proline turn-Fmoc-WPWRR-NH2, termed P-Priscilicidin-expected to disrupt the supramolecular assembly into nanofibrils, while predicted to retain antimicrobial activity. Experiments showed P-Priscilicidin self-assembly to be effectively hindered by the presence of a proline turn, resulting in liquid samples of low viscosity. However, assembly into small oligomers and nanofibril precursors were evidenced. Our results augur well for fast, adaptable, and cost-efficient antimicrobial peptide design with programmable physicochemical properties.
RESUMEN
The dinitrotoluene isomers 2,4 and 2,6-dinitrotoluene (DNT) represent highly toxic, mutagenic, and carcinogenic compounds used in explosive manufacturing and in commercial production of polyurethane foam. Bioremediation, the use of microbes to degrade residual DNT in industry wastewaters, represents a promising, low cost and environmentally friendly alternative technology to landfilling. In the present study, the effect of different bioremediation strategies on the degradation of DNT in a microcosm-based study was evaluated. Biostimulation of the indigenous microbial community with sulphur phosphate (2.3 g/kg sludge) enhanced DNT transformation (82% transformation, from 300 g/L at Day 0 to 55 g/L in week 6) compared to natural attenuation over the same period at 25 °C. The indigenous microbial activity was found to be capable of transforming the contaminant, with around 70% transformation of DNT occurring over the microcosm study. 16S rDNA sequence analysis revealed that while the original bacterial community was dominated by Gammaproteobacteria (30%), the addition of sulphur phosphate significantly increased the abundance of Betaproteobacteria by the end of the biostimulation treatment, with the bacterial community dominated by Burkholderia (46%) followed by Rhodanobacter, Acidovorax and Pseudomonas. In summary, the results suggest biostimulation as a treatment choice for the remediation of dinitrotoluenes and explosives waste.
Asunto(s)
Biodegradación Ambiental , Sustancias Explosivas/toxicidad , Microbiota/genética , Aguas del Alcantarillado/microbiología , Burkholderia/química , Burkholderia/genética , Burkholderia/aislamiento & purificación , Burkholderia/metabolismo , Dinitrobencenos/química , Dinitrobencenos/toxicidad , Sustancias Explosivas/química , Humanos , Pseudomonas/química , Pseudomonas/genética , Pseudomonas/aislamiento & purificación , Pseudomonas/metabolismo , ARN Ribosómico 16S/genéticaRESUMEN
HYPOTHESIS: The ability exhibited by insect wings to resist microbial infestation is a unique feature developed over 400 million years of evolution in response to lifestyle and environmental pressures. The self-cleaning and antimicrobial properties of insect wings may be attributed to the unique combination of nanoscale structures found on the wing surface. EXPERIMENTS: In this study, we characterised the wetting characteristics of superhydrophobic damselfly Calopteryx haemorrhoidalis wings. We revealed the details of air entrapment at the micro- and nano scales on damselfly wing surfaces using a combination of spectroscopic and electron microscopic techniques. Cryo-focused-ion-beam scanning electron microscopy was used to directly observe fungal spores and conidia that were unable to cross the air-liquid interface. By contrast, bacterial cells were able to cross the air-water interface to be ruptured upon attachment to the nanopillar surface. The robustness of the air entrapment, and thus the wing antifungal behaviour, was demonstrated after 1-week of water immersion. A newly developed wetting model confirmed the strict Cassie-Baxter wetting regime when damselfly wings are immersed in water. FINDINGS: We provide evidence that the surface nanopillar topography serves to resist both fungal and bacterial attachment via a dual action: repulsion of fungal conidia while simultaneously killing bacterial cells upon direct contact. These findings will play an important role in guiding the fabrication of biomimetic, anti-fouling surfaces that exhibit both bactericidal and anti-fungal properties.
Asunto(s)
Antifúngicos , Odonata , Animales , Antibacterianos/farmacología , Humectabilidad , Alas de AnimalesRESUMEN
The fungal infestation in construction industries is a major problem with a very high removal cost that needs to be controlled not only to prevent the fouling of surfaces but also to prevent allergic reactions or respiratory problems especially in immunocompromised individuals. To combat fungal invasion, several experimental approaches to produce antifungal surfaces have been developed. Here, we reviewed the current strategies in designing antifungal surfaces and classified those approaches into two major categories: the chemical and/or physical modification of the actual material surface and nanoparticle-based coating formulations created using the functionalised nanoparticles. KEY POINTS: ⢠Antifungal effect of micro- and nano-structured superhydrophobic surfaces. ⢠Long-term antifungal effect conferred through biocides. ⢠Advanced coatings based on functionalised silica, TiO2 and ZnO nanoparticles.
Asunto(s)
Antifúngicos , Nanopartículas , Antifúngicos/farmacología , Entorno Construido , Humanos , Proyectos de Investigación , Dióxido de SilicioRESUMEN
The global public health threat of antimicrobial resistance has led the scientific community to highly engage into research on alternative strategies to the traditional small molecule therapeutics. Here, we review one of the most popular alternatives amongst basic and applied research scientists, synthetic antimicrobial peptides. The ease of peptide chemical synthesis combined with emerging engineering principles and potent broad-spectrum activity, including against multidrug-resistant strains, has motivated intense scientific focus on these compounds for the past decade. This global effort has resulted in significant advances in our understanding of peptide antimicrobial activity at the molecular scale. Recent evidence of molecular targets other than the microbial lipid membrane, and efforts towards consensus antimicrobial peptide motifs, have supported the rise of molecular engineering approaches and design tools, including machine learning. Beyond molecular concepts, supramolecular chemistry has been lately added to the debate; and helped unravel the impact of peptide self-assembly on activity, including on biofilms and secondary targets, while providing new directions in pharmaceutical formulation through taking advantage of peptide self-assembled nanostructures. We argue that these basic research advances constitute a solid basis for promising industry translation of rationally designed synthetic peptide antimicrobials, not only as novel drugs against multidrug-resistant strains but also as components of emerging antimicrobial biomaterials. This perspective is supported by recent developments of innovative peptide-based and peptide-carrier nanobiomaterials that we also review.
RESUMEN
Nematode eggs are pervasive pathogens that infect billions of people and livestock every year. Adult parasitic nematode worms can be distinguished based on their size and morphology. However, their eggs, particularly their species Ascaris lumbricoides and Ascaris suum cannot be identified from each other. Identifying eggs of helminths from wastewater and sludge is important from a public health perspective to minimize the spread of Ascaris infections. Numerous methods exist for nematode identification, from a morphological-based approach to high throughput sequencing technology. However, these techniques are not consistent and often laborious and time-consuming. In this study, we demonstrate that non-invasive real-time identification of eggs is possible based on their intrinsic fluorescence. Using confocal microscopy, we investigate the autofluorescence properties of five species of nematode eggs and observe clear differences between genus and for the first time their species in sludge samples. This non-invasive imaging technique could lead to better understanding of these species and may assist in early control of diseases.
Asunto(s)
Ascariasis/diagnóstico , Ascaris lumbricoides/citología , Ascaris suum/citología , Óvulo/citología , Animales , Humanos , Microscopía Confocal , Recuento de Huevos de ParásitosRESUMEN
The microbial contamination of surfaces presents a significant challenge due to the adverse effects associated with biofilm formation, particularly on implantable devices. Here, the attachment and biofilm formation of the opportunistic human pathogen, Candida albicans ATCC 10231, were studied on surfaces with decreasing magnitudes of nanoscale roughness. The nanoscale surface roughness of nonpolished titanium, polished titanium, and glass was characterized according to average surface roughness, skewness, and kurtosis. Nonpolished titanium, polished titanium, and glass possessed average surface roughness (Sa) values of 350, 20, and 2.5 nm; skewness (Sskw) values of 1.0, 4.0, and 1.0; and (Skur) values of 3.5, 16, and 4, respectively. These unique characteristics of the surface nanoarchitecture were found to play a key role in limiting C. albicans attachment and modulating the functional phenotypic changes associated with biofilm formation. Our results suggest that surfaces with a specific combination of surface topographical parameters could prevent the attachment and biofilm formation of C. albicans. After 7 days, the density of attached C. albicans cells was recorded to be 230, 70, and 220 cells mm-2 on nonpolished titanium, polished titanium, and glass surfaces, respectively. Despite achieving a very low attachment density, C. albicanscells were only observed to produce hyphae associated with biofilm formation on nonpolished titanium surfaces, possessing the highest degree of surface roughness (Sa = 350 nm). This study provides a more comprehensive picture of the impact of surface architectures on C. albicans attachment, which is beneficial for the design of antifungal surfaces.
RESUMEN
Per- and polyfluoroalkyl substances (PFAS) are Synthetic Organic Compounds (SOCs) which are of current concern as they are linked to a myriad of adverse health effects in mammals. They can be found in drinking water, rivers, groundwater, wastewater, household dust, and soils. In this review, the current challenge and status of bioremediation of PFAs in soils was examined. While several technologies to remove PFAS from soil have been developed, including adsorption, filtration, thermal treatment, chemical oxidation/reduction and soil washing, these methods are expensive, impractical for in situ treatment, use high pressures and temperatures, with most resulting in toxic waste. Biodegradation has the potential to form the basis of a cost-effective, large scale in situ remediation strategy for PFAS removal from soils. Both fungal and bacterial strains have been isolated that are capable of degrading PFAS; however, to date, information regarding the mechanisms of degradation of PFAS is limited. Through the application of new technologies in microbial ecology, such as stable isotope probing, metagenomics, transcriptomics, and metabolomics there is the potential to examine and identify the biodegradation of PFAS, a process which will underpin the development of any robust PFAS bioremediation technology.
RESUMEN
In northern Mexico, aridity, salinity and high temperatures limit areas that can be cultivated. To investigate the nature of nitrogen-fixing symbionts of Phaseolus filiformis, an adapted wild bean species native to this region, their phylogenies were inferred by MLSA. Most rhizobia recovered belong to the proposed new species Ensifer aridi. Phylogenetic analyses of nodC and nifH show that Mexican isolates carry symbiotic genes acquired through horizontal gene transfer that are divergent from those previously characterized among bean symbionts. These strains are salt tolerant, able to grow in alkaline conditions, high temperatures, and capable of utilizing a wide range of carbohydrates and organic acids as carbon sources for growth. This study improves the knowledge on diversity, geographic distribution and evolution of bean-nodulating rhizobia in Mexico and further enlarges the spectrum of microsymbiont with which Phaseolus species can interact with, including cultivated bean varieties, notably under stressed environments. Here, the species Ensifer aridi sp. nov. is proposed as strain type of the Moroccan isolate LMR001T (= LMG 31426T; = HAMBI 3707T) recovered from desert sand dune.
Asunto(s)
Phaseolus/metabolismo , Rhizobiaceae/clasificación , Rhizobiaceae/aislamiento & purificación , Nódulos de las Raíces de las Plantas/microbiología , ADN Bacteriano/genética , Calor , México , Phaseolus/crecimiento & desarrollo , Filogenia , ARN Ribosómico 16S/genética , Rhizobiaceae/genética , Tolerancia a la Sal/genética , Arena , Análisis de Secuencia de ADN , SimbiosisRESUMEN
Petroleum hydrocarbons represent the most frequent environmental contaminant. The introduction of petroleum hydrocarbons into a pristine environment immediately changes the nature of that environment, resulting in reduced ecosystem functionality. Natural attenuation represents the single, most important biological process which removes petroleum hydrocarbons from the environment. It is a process where microorganisms present at the site degrade the organic contaminants without the input of external bioremediation enhancers (i.e., electron donors, electron acceptors, other microorganisms or nutrients). So successful is this natural attenuation process that in environmental biotechnology, bioremediation has developed steadily over the past 50 years based on this natural biodegradation process. Bioremediation is recognized as the most environmentally friendly remediation approach for the removal of petroleum hydrocarbons from an environment as it does not require intensive chemical, mechanical, and costly interventions. However, it is under-utilized as a commercial remediation strategy due to incomplete hydrocarbon catabolism and lengthy remediation times when compared with rival technologies. This review aims to describe the fate of petroleum hydrocarbons in the environment and discuss their interactions with abiotic and biotic components of the environment under both aerobic and anaerobic conditions. Furthermore, the mechanisms for dealing with petroleum hydrocarbon contamination in the environment will be examined. When petroleum hydrocarbons contaminate land, they start to interact with its surrounding, including physical (dispersion), physiochemical (evaporation, dissolution, sorption), chemical (photo-oxidation, auto-oxidation), and biological (plant and microbial catabolism of hydrocarbons) interactions. As microorganism (including bacteria and fungi) play an important role in the degradation of petroleum hydrocarbons, investigations into the microbial communities within contaminated soils is essential for any bioremediation project. This review highlights the fate of petroleum hydrocarbons in tertial environments, as well as the contributions of different microbial consortia for optimum petroleum hydrocarbon bioremediation potential. The impact of high-throughput metagenomic sequencing in determining the underlying degradation mechanisms is also discussed. This knowledge will aid the development of more efficient, cost-effective commercial bioremediation technologies.
Asunto(s)
Ecosistema , Hidrocarburos/análisis , Microbiota , Contaminación por Petróleo/análisis , Petróleo/análisis , Biodegradación Ambiental , Hidrocarburos/toxicidad , Microbiota/efectos de los fármacosRESUMEN
We assessed the water quality of south-west Victorian rivers impacted by the dairy industry using traditional water quality assessment together with culture-dependent (colilert/enterolert) and also culture-independent (next generation sequencing) microbial methods. The aim of the study was to identify relationships/associations between dairy farming intensity and water contamination. Water samples with high total and faecal coliforms (>1000 MPN cfu/100â¯ml), and with high nitrogen levels (TN) were observed in zones with a high proportion of dairy farming. Members of the genus Nitrospira, Rhodobacter and Rhodoplanes were predominant in such high cattle density zones. Samples from sites in zones with lower dairy farming activities registered faecal coliform numbers within the permissible limits (<1000 MPNâ¯cfu/100â¯ml) and showed the presence of a wide variety of microorganisms. However, no bacterial pathogens were found in the river waters regardless of the proportion of cattle. The data suggests that using the spatially weighted proportion of land used for dairy farming is a useful way to target at-risk sub-catchments across south west Victoria; further work is required to confirm that this approach is applicable in other regions.
Asunto(s)
Bacterias/aislamiento & purificación , Industria Lechera , Ríos/microbiología , Microbiología del Agua , Contaminación del Agua , Animales , Bacterias/clasificación , Bovinos , ADN Bacteriano/genética , ADN Bacteriano/aislamiento & purificación , Enterobacteriaceae/aislamiento & purificación , Monitoreo del Ambiente , Heces/microbiología , Agua Dulce/química , Agua Dulce/microbiología , Nitrógeno/análisis , ARN Ribosómico 16S/genética , ARN Ribosómico 16S/aislamiento & purificación , Rhodobacter/aislamiento & purificación , Ríos/química , Análisis de Secuencia de ADN , Victoria , Calidad del AguaRESUMEN
Green cincau (Premna oblongifolia Merr.) is a traditional food of Indonesia and provides a natural source of dietary fibre and antioxidants. This study evaluated the ability of green cincau, and other dietary fibres with or without the addition of anti-oxidant, epigallocatechin-3-gallate (EGCG), to prevent colorectal cancer in a 12 week azoxymethane (AOM) rat model. While all dietary treatments stimulated short chain fatty acid production (SCFA) in the digesta and faeces, no one treatment was able to significantly protect against aberrant crypt formation (ACF), when compared to the control diet. However, feeding green cincau leaves or extracts did not result in an increase in ACF compared to the control diet. Unexpectedly, when the dietary fibre source was pectin, 0.1% EGCG increased proliferative activity and liver lipid peroxidation when compared to the control diet containing cellulose. Examination of faecal microbial communities identified the presence of short chain acid producing bacteria, but a distinct community profile was not observed from any individual diet group. Overall, this research implies that combining dietary fibre with an antioxidant does not automatically equate to a beneficial response. Further work is required to investigate the health-promoting properties of green cincau.
Asunto(s)
Neoplasias del Colon/prevención & control , Fibras de la Dieta/uso terapéutico , Ácidos Grasos Volátiles/metabolismo , Lamiaceae/química , Animales , Azoximetano/toxicidad , Células Cultivadas , Colon/efectos de los fármacos , Colon/metabolismo , Colon/microbiología , Neoplasias del Colon/etiología , Fibras de la Dieta/farmacología , Microbioma Gastrointestinal , Peroxidación de Lípido , Masculino , Ratas , Ratas Sprague-DawleyRESUMEN
Bioaugmentation or the addition of microbes to contaminated sites has been widely used to treat contaminated soil or water; however this approach is often limited to laboratory based studies. In the present study, large scale bioaugmentation has been applied to total petroleum hydrocarbons (TPH)-contaminated groundwater at a petroleum facility. Initial TPH concentrations of 1564â¯mgâ¯L-1 in the field were reduced to 89â¯mgâ¯L-1 over 32 days. This reduction was accompanied by improved ecotoxicity, as shown by Brassica rapa germination numbers that increased from 52 at day 0 to 82% by the end of the treatment. Metagenomic analysis indicated that there was a shift in the microbial community when compared to the beginning of the treatment. The microbial community was dominated by Proteobacteria and Bacteroidetes from day 0 to day 32, although differences at the genus level were observed. The predominant genera at the beginning of the treatment (day 0 just after inoculation) were Cloacibacterium, Sediminibacterium and Brevundimonas while at the end of the treatment members of Flavobacterium dominated, reaching almost half the population (41%), followed by Pseudomonas (6%) and Limnobacter (5.8%). To the author's knowledge, this is among the first studies to report the successful large scale biodegradation of TPH-contaminated groundwater (18,000â¯L per treatment session) at an offshore petrochemical facility.
Asunto(s)
Petróleo , Microbiología del Suelo , Contaminantes del Suelo , Biodegradación Ambiental , Agua Subterránea , HidrocarburosRESUMEN
Phenanthrene mineralisation studies in both pristine and contaminated sandy soils were undertaken through detailed assessment of the activity and diversity of the microbial community. Stable isotope probing (SIP) was used to assess and identify active 13C-labelled phenanthrene degraders. Baseline profiling indicated that there was little difference in fungal diversity but a significant difference in bacterial diversity dependent on contamination history. Identification of dominant fungal and bacterial species highlighted the presence of organisms capable of degrading various petroleum-based compounds together with other anthropogenic compounds, regardless of contamination history. Community response following a simulated contamination event (14C-phenanthrene) showed that the microbial community in deep pristine and shallow contaminated soils adapted most to the presence of phenanthrene. The similarity in microbial community structure of well-adapted soils demonstrated that a highly adaptable fungal community in these soils enabled a rapid response to the introduction of a contaminant. Ten fungal and 15 bacterial species were identified as active degraders of phenanthrene. The fungal degraders were dominated by the phylum Basidiomycota including the genus Crypotococcus, Cladosporium and Tremellales. Bacterial degraders included the genera Alcanivorax, Marinobacter and Enterococcus. There was little synergy between dominant baseline microbes, predicted degraders and those that were determined to be actually degrading the contaminant. Overall, assessment of baseline microbial community in contaminated soils provides useful information; however, additional laboratory assessment of the microbial community's ability to degrade pollutants allows for better prediction of the bioremediation potential of a soil.