Genetic parameters for carcass traits and body weight using a Bayesian approach in the Canchim cattle.

Correlation between genetic parameters and factors such as backfat thickness (BFT), rib eye area (REA), and body weight (BW) were estimated for Canchim beef cattle raised in natural pastures of Brazil. Data from 1648 animals were analyzed using multi-trait (BFT, REA, and BW) animal models by the Bayesian approach. This model included the effects of contemporary group, age, and individual heterozygosity as covariates. In addition, direct additive genetic and random residual effects were also analyzed. Heritability estimated for BFT (0.16), REA (0.50), and BW (0.44) indicated their potential for genetic improvements and response to selection processes. Furthermore, genetic correlations between BW and the remaining traits were high (P > 0.50), suggesting that selection for BW could improve REA and BFT. On the other hand, genetic correlation between BFT and REA was low (P = 0.39 ± 0.17), and included considerable variations, suggesting that these traits can be jointly included as selection criteria without influencing each other. We found that REA and BFT responded to the selection processes, as measured by ultrasound. Therefore, selection for yearling weight results in changes in REA and BFT.

Candidate genes for carcass traits in a tropical-adapted Brazilian composite beef breed.

Backfat thickness (BFT) and ribeye area (REA) are important production traits but, because they are measured late in the animal's life, they have not been efficiently included in breeding programs. The aim of this study was to evaluate whether single nucleotide polymorphisms (SNPs) mapped to the leptin, PPARGC1A, PSMC1, CRH, and FABP4 genes, which influence BFT and REA in Canchim cattle, a composite beef breed (5/8 Charolais + 3/8 Zebu). BFT and REA phenotypic records were obtained by ultrasound measurements from 18-month-old animals. All SNP markers were genotyped by restriction fragment length polymorphism-polymerase chain reaction. Restricted maximum likelihood analysis revealed that the non-synonymous SNP located in exon 2 of the FABP4 gene has an additive effect on BFT (P ≤ 0.05). Significant allele substitution effects showed that the substitution of G by A may lead to a decrease of 0.1055 mm in mean BFT. This information can be used for inclusion of this trait-associated marker in commercial SNP panels.

Single nucleotide polymorphisms in candidate genes associated with gastrointestinal nematode infection in goats.

Cytokines are small cell-signaling proteins that play an important role in the immune system, participating in intracellular communication. Four candidate genes of the cytokine family (IL2, IL4, IL13, and IFNG) were selected to identify Single Nucleotide Polymorphisms (SNPs) that might be associated with resistance to gastrointestinal endoparasites in goats. A population of 229 goats, F2 offspring from an F1 intercross was produced by crossing pure Saanen goats, considered as susceptible to gastrointestinal endoparasites, with pure Anglo-Nubian goats, considered resistant. Blood was collected for DNA extraction and fecal samples were also collected for parasite egg count. Polymorphisms were prospected by sequencing animals with extreme phenotype for fecal egg count (FEC) distribution. The association between SNPs and phenotype was determined by using the Fisher exact test with correction for multiple tests. Three of the 10 SNPs were identified as significant (P ≤ 0.03). They were found in intron 1 of IL2 (ENSBTA00000020883), intron 3 of IL13 (ENSBTA00000015953) and exon 3 of IFNG (ENSBTA00000012529), suggesting an association between them and gastrointestinal endoparasite resistance. Further studies will help describe the effects of these markers accurately before implementing them in marker assisted selection. This study is the pioneer in describing such associations in goats.

Candidate genes for production traits in Nelore beef cattle.

Meat quality is an important trait for the beef industry. Backfat thickness, ribeye area, and shear force are traits measured late in life, and the investigation of molecular markers associated with these traits can help breeding programs. In cattle, some polymorphisms have been related to production traits. Thus, the purpose of this study was to assess the presence of polymorphisms in the candidate genes insulin-like growth factor 1 (IGF1), fatty acid-binding protein 4 (FABP4), and peroxisome proliferative active receptor gamma coactivator 1 A (PPARGC1A) and associate them with production traits in reference families of Nelore cattle. We used 270 steers descendent from 20 sires that were chosen to represent variability in this breed. The investigation of marker effects on the traits was performed using a mixed model under the restricted maximum likelihood method. A significant allele substitution effect was found for IGF1 and yearling weight (P ≤ 0.017). The mean allele substitution effect was 6.9 kg, with the 229 allele associated with reduced yearling weight in this Nelore population.

A SNP in ASAP1 gene is associated with meat quality and production traits in Nelore breed.

The ASAP1 gene is located in a QTL region for meat production traits and to access the role of the ASAP1 gene, the association between a SNP in this gene and production traits in beef cattle was studied. For this, about 270 steers of reference families of Nelore breed were used. The investigation of marker effects on the traits was performed using a mixed model under the restricted maximum likelihood method. Novel association of a SNP in the ASAP1 gene and shear force measured at 24 h post mortem (P≤0.0083) was described in this population of Nelore cattle. This polymorphism accounted for 1.13% of the total additive variance and 17.51% of total phenotypic variance of the trait, suggesting that this marker could be used in marker assisted selection.

Whole-genome analysis for backfat thickness in a tropically adapted, composite cattle breed from Brazil.

Backfat thickness affects the preservation of the beef carcass after slaughter and confers organoleptic characteristics assessed by the consumer. One of the breeding goals for Canchim, a tropically adapted breed, is to comprehensively increase fat thickness. Our goals were to identify genomic regions associated with backfat in Canchim populations and validate the association of single nucleotide polymorphisms (SNPs) overlapping previously identified QTL regions known to affect fat deposition. Fifteen animals with lower and 15 animals with higher residues for backfat, according to a linear model using the SAS GLM procedure, were selected from a population of 1171 animals and genotyped using the BovineSNP50 BeadChip. Initial analysis revealed more than 100 SNPs that discriminated the tails of phenotypic distribution. One extended region of association included the centromeric region of chromosome (Chr) 14. Because this region overlapped with QTL from previous reports, we developed SNP assays to interrogate two linkage disequilibrium blocks, one in the centromeric region and another in the middle region of Chr 14 to confirm the association. The analysis validated the presence of specific haplotypes affecting fat thickness.

Candidate gene region for control of rib eye area in Canchim beef cattle.

Investigation of molecular marker effects on production traits is essential to define marker assisted selection strategies in beef cattle. We looked for a possible association of molecular markers and backfat thickness (BFT) and rib eye area (REA) in Canchim (5/8 Charolais + 3/8 Zebu) and MA (offspring of Charolais bulls and 1/2 Canchim + 1/2 Zebu cows) animals raised exclusively on pasture. Traits were measured on 987 individuals from seven herds from two Brazilian States (São Paulo and Goiás), in March and April from 2005 to 2007, when animals were, on average, 19 months of age. Five microsatellite markers lying in QTL regions for BFT and REA (BMS490 and ETH10 on chromosome 5, INRA133 and ILSTS090 on chromosome 6, and BMS2142 on chromosome 19) were genotyped and association analyses were performed under an animal model using the restricted maximum likelihood method. After correction for multiple tests, a significant effect of microsatellite BMS490 on REA was observed, suggesting that at least one QTL affecting carcass traits in this region of the BTA5. No significant effect on BFT was observed for these markers.

Prospecting candidate SNPs for backfat in Canchim beef cattle.

Canchim is a composite cattle breed developed in Brazil for beef production. One of the breeding objectives is to increase fat deposition. QTLs for fat thickness and/or marbling have been reported on BTA4 and BTA14. The IGFBP3 and DDEF1 genes, mapped to BTA4 and BTA14, respectively, affect adipogenesis. We looked for SNPs in the IGFBP3 and DDEF1 genes that could be associated with backfat thickness in Canchim beef cattle. For SNP identification, sires with the highest accuracy were ranked according to expected breeding value for fat thickness; the 12 extremes (six sires with the highest and six with the lowest expected breeding value for the trait) were chosen. Six regions of the IGFBP3 and 14 regions of the DDEF1 were sequenced using the Sanger method. Nine SNPs were identified in IGFBP3 and 76 in the DDEF1. After an initial analysis, two SNPs were selected to be genotyped for the whole population; these were DDEF1g.279401A>G and IGFBP3c.4394T>C(Trp>Arg). We found a significant effect (P ≤ 0.05) of allele substitution on backfat thickness; however, the IGFBP3 SNP did not significantly affect this trait.