Detection of carvacrol in essential oils by electrochemical polymerization.

Carvacrol (Carv) and thymol (TOH), components of essential oils, are known by their antimicrobial and antioxidant activity. However, Carv but not TOH seems to be the responsible of anti-inflammatory and inhibition of Cu corrosion properties. Since Carv and TOH are positional isomers, their identification is tricky and GC-MS is usually required. To find simple and inexpensive methods that allow the detection of Carv in presence of TOH (e.g. essential oils), cyclic voltammetry and chronoamperometry tests using Pt and Cu as electrodes in TOH and Carv containing mixtures and essential oils were made. Electrochemical and ATR-FTIR results show that pure phytocompounds and mixtures lead to the formation of polymeric layers on both metallic surfaces. Results show that only Cu is suitable for Carv detection. Potentiostatic and potentiodynamic detection is simple and conclusive in Carv + TOH mixtures and in essential oils due to the formation of a homogeneous blocking Carv electropolymeric layer on Cu.

Effects of radiotherapy on plasma energy metabolites in patients with breast cancer who received neoadjuvant chemotherapy.

PURPOSE: Neoadjuvant chemotherapy (NACT) is employed in patients with breast cancer (BC) with the aim of reducing tumor burden and improving surgical outcomes. We evaluated the levels of energy metabolites pre- and post-radiotherapy (RT) in breast cancer (BC) patients who previously received NACT and investigated the alterations of these metabolites in relation to the patient achieving a pathologic complete response to NACT. MATERIALS AND METHODS: We included 37 BC patients who were treated with NACT following surgery and analyzed the concentrations of energy balance-related metabolites using targeted metabolomics before and one month after the end of RT. The control group was composed of 44 healthy women. RESULTS: Pre-radiotherapy, patients had significant decreases in the plasma levels of 12 metabolites. RT corrected these alterations and the improvement was superior in patients with a pathologic complete response. CONCLUSION: Our results highlight the importance of metabolism in the outcomes of patients with BC.

Germline promoter hypermethylation in BRCA1 and BRCA2 genes is not present in hereditary breast cancer patients.

PURPOSE: Germline promoter hypermethylation of BRCA1 and BRCA2 genes is an alternative event of gene silencing that has not been widely investigated in hereditary breast and ovarian cancer (HBOC) syndrome. METHODS: We analyzed germline BRCA promoter hypermethylation in HBOC patients with and without BRCA mutations and control subjects, using a recently developed BRCA methylation-specific multiplex ligation-dependent probe amplification (MS-MLPA) assay. RESULTS: Neither the patients tested nor the control subjects showed germline hypermethylation of the BRCA1 and BRCA2 promoter regions analyzed. CONCLUSIONS: Despite the results achieved at somatic levels by other researchers, these were not confirmed in our study at the germline level. Our results show the need to establish more predictive CpG sites in the BRCA promoter regions to optimize the MS-MLPA assay for the detection of germline hypermethylation as an effective pre-screening tool for whole-BRCA genetic analysis in HBOC, because we can not rule out the existence of germline promoter hypermethylation in BRCA.

Reduction of copper ions release by a novel ecofriendly electropolymerized nanolayer obtained from a natural compound (carvacrol).

The release of copper ions by copper-containing devices, equipments and facilities represents a potential risk for biological systems. Different inhibitory treatments (CuIT) that use organic compounds have been proposed to reduce this environmental hazard but many of them are not in accordance with new regulations. The development of an ecofriendly CuIT based on the use of carvacrol, a natural phenolic compound present in essential oils, is reported here. The effects of carvacrol adsorption (adCarv) and its electropolymerization (polyCarv) were examined. Electropolymerization was attained after cycling the copper electrode in the 0.3-1.0V potential range. Electrochemical techniques complemented by ATR-FTIR, XPS, SEM and AFM surface analyses were used to evaluate the composition and characteristics of the layers. Results demonstrated that adCarv includes cetonic structures while polyCarv additionally contains ether bonds. AFM and SEM observations showed the presence of round nanoglobules, larger for adCarv (close to 50nm diameter). Cytotoxicity of adCarv and polyCarv layers on copper was also evaluated. The comparative analysis of both treatments revealed that polyCarv nanolayer is highly protective while the adCarv layer is weakly protective and reduction in cell viability was found. It was concluded that CuIT that leads to polyCarv nanolayer is very effective and ecofriendly.

The importance of 2D aggregates on the antimicrobial resistance of Staphylococcus aureus sessile bacteria.

Biofilms formed on implanted devices are difficult to eradicate. Adhesion mechanism, high bacterial density, aggregation, induction of persisters and stressed bacteria are some of the factors considered when the antimicrobial resistance of these biofilms is analyzed. The aim of this work was to provide an alternative approach to the understanding of this issue by using a specially designed experimental set up that includes the use of microstructured (MS) surfaces (potential inhibitors of bacterial aggregation) in combination with antimicrobial agents (streptomycin and levofloxacin) against Staphylococcusaureus attached cells. Biofilms formed on smooth surfaces were used as plain controls (biofilmed-PC) characterized by the formation of dense 2D bacterial aggregates. Results showed bacterial persistence when streptomycin or levofloxacin were applied to PC-biofilms. The antimicrobial activity of both antibiotics was enhanced when bacteria were attached on MS, where single cells or small aggregates were observed. Thus, dense 2D aggregates of bacteria seem to be crucial as a required previous stage to develop the antimicrobial resistance.

Synergistic antimicrobial effect against early biofilm formation: micropatterned surface plus antibiotic treatment.

The detrimental effects of biofilms are a cause of great concern in medical, industrial and environmental areas. In this study, we proposed a novel eradication strategy consisting of the combined use of micropatterned surfaces and antibiotics on biofilms to reduce the rate of bacterial colonisation. Pseudomonas fluorescens biofilms were used to perform a comparative evaluation of possible strategies to eradicate these biological layers. First, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration of planktonic cultures were determined. Subsequently, adhesion of bacteria on microstructured gold surfaces (MS) with patterned features that were similar to the bacterial diameter as well as on smooth nanostructured gold (NS) was assessed. As expected, lower bacterial attachment as well as inhibition of bacterial aggregation were observed on MS. The effect of streptomycin treatment (ST) in the concentration range 1-4 mg/L (0.25-1× MIC) on biofilms grown on MS and NS was also evaluated. The combined strategy involving the use of micropatterned surfaces and antibiotic treatment (MS+ST) to eradicate Pseudomonas biofilms was then investigated. Results showed a synergistic effect of MS+ST that yielded a reduction of ≥1000-fold in the number of surviving biofilm bacteria with respect to those obtained with single ST or MS. The combined strategy may be a significant contribution to the eradication of biofilms from different environments. In addition, the important role of early monolayer bacterial aggregates in increasing resistance to antimicrobial agents was demonstrated.

Biological effects of magnesium particles degradation on UMR-106 cell line: influence of fluoride treatments.

Mg-based materials are promising for orthopedic, dental, and cardiovascular applications but their high degradation rate in vivo (release of Mg ions and debris particles) is cause of great concern. Protective treatments involving fluoride conversion coatings have been proposed in order to reduce corrosion rates. The aim of this study was to evaluate Mg debris biodegradation and its possible cytotoxic effects on osteoblastic cells in situ. Neutral Red dying and Acridine Orange staining techniques were used as endpoints to analyse the cytotoxic effects at 100-2000 µg/mL concentration range. Results showed a marked variation of Mg ion concentration in the culture medium after different exposure periods (1, 2, or 24h). Interestingly, the release rate of magnesium ions was dependent on the presence or absence fluoride treatment. Adverse effects induced by ≥1000 µg/mL MP doses and Mg ion concentrations higher than 480 µg/mL were observed on cells. Results showed significant differences between the concentration of Mg ions in the presence and absence of cells. This fact reveals a dynamic equilibrium mediated by Mg ion input and output in the cells that leads to the change in MP corrosion rates. Fluoride release from conversion coatings did not show cytotoxic effects.

Have flagella a preferred orientation during early stages of biofilm formation?: AFM study using patterned substrates.

Biofilm development involves several stages and flagellar expression of bacteria is considered an important factor in this process. However, its role in the earliest stage of biofilm development is not yet clear. In order to analyse this topic, Pseudomonas fluorescens samples were trapped on a patterned gold surface with sub-microtrenches (ST) so as to hinder their motility, and nanostructured gold with random orientation (SR) was used as control substrate. Atomic force microscopic (AFM) observations were made on untreated samples. Initially, ca. 75% of the flagella on ST and 85% of flagella on SR are oriented towards the neighbouring bacteria. Some of them made contact and surrounded the cells. Subsequently, 2-D raft structures formed on SR inert substrates with lateral curly flagella, while those at the poles of the rafts turned towards the nearest cell group. A few flagella and the formation of 3-D bacterial structures were observed on toxic substrates like copper. Results showed that patterned substrates are suitable tools to detect the orientation of flagella in the earliest stage of biofilm formation on solid opaque surfaces avoiding sample pre-treatment.

Spontaneous adsorption of silver nanoparticles on Ti/TiO2 surfaces. Antibacterial effect on Pseudomonas aeruginosa.

Titanium is a corrosion-resistant and biocompatible material widely used in medical and dental implants. Titanium surfaces, however, are prone to bacterial colonization that could lead to infection, inflammation, and finally to implant failure. Silver nanoparticles (AgNPs) have demonstrated an excellent performance as biocides, and thus their integration to titanium surfaces is an attractive strategy to decrease the risk of implant failure. In this work a simple and efficient method is described to modify Ti/TiO(2) surfaces with citrate-capped AgNPs. These nanoparticles spontaneously adsorb on Ti/TiO(2), forming nanometer-sized aggregates consisting of individual AgNPs that homogeneously cover the surface. The modified AgNP-Ti/TiO(2) surface exhibits a good resistance to colonization by Pseudomonas aeruginosa, a model system for biofilm formation.

Comparative study of the cytotoxic and genotoxic effects of titanium oxide and aluminium oxide nanoparticles in Chinese hamster ovary (CHO-K1) cells.

The aim of this study was to analyze the cytotoxicity and genotoxicity of titanium oxide (TiO(2)) and aluminium oxide (Al(2)O(3)) nanoparticles (NPs) on Chinese hamster ovary (CHO-K1) cells using neutral red (NR), mitochondrial activity (by MTT assay), sister chromatid exchange (SCE), micronucleus (MN) formation, and cell cycle kinetics techniques. Results showed a dose-related cytotoxic effect evidenced after 24h by changes in lysosomal and mitochondrial dehydrogenase activity. Interestingly, transmission electronic microscopy (TEM) showed the formation of perinuclear vesicles in CHO-K1 cells after treatment with both NPs during 24h but no NP was detected in the nuclei. Genotoxic effects were shown by MN frequencies which significantly increased at 0.5 and 1 microg/mL TiO(2) and 0.5-10 microg/mL Al(2)O(3). SCE frequencies were higher for cells treated with 1-5 microg/mL TiO(2). The absence of metaphases evidenced cytotoxicity for higher concentrations of TiO(2). No SCE induction was achieved after treatment with 1-25 microg/mL Al(2)O(3). In conclusion, findings showed cytotoxic and genotoxic effects of TiO(2) and Al(2)O(3) NPs on CHO-K1 cells. Possible causes of controversial reports are discussed further on.

Corrosion inhibition of powder metallurgy Mg by fluoride treatments.

Pure Mg has been proposed as a potential degradable biomaterial to avoid both the disadvantages of non-degradable internal fixation implants and the use of alloying elements that may be toxic. However, it shows excessively high corrosion rate and insufficient yield strength. The effects of reinforcing Mg by a powder metallurgy (PM) route and the application of biocompatible corrosion inhibitors (immersion in 0.1 and 1M KF solution treatments, 0.1M FST and 1M FST, respectively) were analyzed in order to improve Mg mechanical and corrosion resistance, respectively. Open circuit potential measurements, polarization techniques (PT), scanning electrochemical microscopy (SECM) and electrochemical impedance spectroscopy (EIS) were performed to evaluate its corrosion behavior. SECM showed that the local current of attacked areas decreased during the F(-) treatments. The corrosion inhibitory action of 0.1M FST and 1M FST in phosphate buffered solution was assessed by PT and EIS. Under the experimental conditions assayed, 0.1M FST revealed better performance. X-ray photoelectron spectroscopy, energy dispersive X-ray and X-ray diffraction analyses of Mg(PM) with 0.1M FST showed the presence of KMgF(3) crystals on the surface while a MgF(2) film was detected for 1M FST. After fluoride inhibition treatments, promising results were observed for Mg(PM) as degradable metallic biomaterial due to its higher yield strength and lower initial corrosion rate than untreated Mg, as well as a progressive loss of the protective characteristics of the F(-)-containing film which ensures the gradual degradation process.

Assessment of cytotoxic and cytogenetic effects of a 1,2,5-thiadiazole derivative on CHO-K1 cells. Its application as corrosion inhibitor.

This work focuses on the possible use of phenanthro[9,10-c]-1,2,5-thiadiazole 1,1-dioxide (TDZ) as a harmless corrosion inhibitor. TDZ range-dose providing minimum adverse effects to the environment and human health, with satisfactory corrosion-inhibiting properties was evaluated. Cytotoxicity and genotoxicity of TDZ at 0.57-12.50 microM concentration range were tested by neutral red, chromosomal aberrations, mitotic index, and colony formation assays. Results showed a significant increase of chromatid-type aberrations for the highest concentration of TDZ assayed (12.50 microM). Additionally, a reduction in the proliferative rate for lower concentrations was detected by the MI assay. We concluded that TDZ should be used at concentrations lower than 1.16 microM. Corrosion assays performed showed good inhibition effect (ca. 50%) at low (0.65 microM) TDZ concentration. Consequently, our results indicated that TDZ induced a time- and dose-dependent genotoxic and cytotoxic response on CHO-K1 cells. Short assays should be complemented with long exposure tests to simulate chronic contact with TDZ since lower threshold levels may be found for shorter exposures and a wrong safety range could be determined.

Effects of copper ions released from metallic copper on CHO-K1 cells.

The aim of this study was to investigate the cytotoxic and genotoxic effect of copper extracts obtained from metallic copper in Chinese hamster ovary (CHO-K1) cell line using neutral red (NR), sister chromatid exchange (SCE), chromosomal aberrations (CA) and cell-cycle kinetics tests. Cells were cultured in Ham-F10 with different copper-containing extracts obtained after the immersion of copper disks for 1, 2, 3, 9, 12, 24, 48 and 72 h in culture medium. Results from cytotoxicity assay showed an inverted U-shape response evidenced in changes in lysosomal activity and mitotic index. The analysis of CA revealed an increase of abnormal metaphases for copper concentration (cCu) in the 5.67-7.42 mg/L dose-range (p<0.001). In addition, SCE frequencies were higher for treated cells when compared with controls in the 1.56-7.42 mg/L concentration range (p<0.001). The absence of metaphases indicated cytotoxicity for cCu≥10.85 mg/L. Results show that cells close to copper-containing materials releasing copper ions are susceptible to cytotoxic and genotoxic effects.

Relationship between radial diffusion of copper ions released from a metal disk and cytotoxic effects. Comparison with results obtained using extracts.

The extended use of metallic biomaterials yields to increasing sources of metal ions within the human body and may result in inflammation of the surrounding tissues, cell damage, and cancer. The aim of this study was to investigate the relationship between the radial diffusion of metal ions released from a metal disk by the corrosion process and the toxic effect on a cell line that grew around it. Results obtained with the metal disks (direct contact) were compared with assays made with extracts obtained from the dissolution of a metallic sample ex situ and then added to the cell culture to elucidate the cause of apparent inconsistencies in previous reports. The change of copper concentration due to corrosion and transient diffusion of copper ions from the copper disks into the cell line was evaluated according to Fick's 2nd law. Surviving cells distribution was interpreted considering the radial and time-dependence of copper concentration. We concluded that the toxic effect on those cells close to metallic biomaterials may be underestimated when only the extract methodology is employed for cytotoxic tests or when during the experiments with disks the presence of concentration gradients and the non-homogeneous distribution of dead cells are disregarded.

Nano/microscale order affects the early stages of biofilm formation on metal surfaces.

The adhesion of Pseudomonas fluorescens was studied on nano/microengineered surfaces. Results show that these bacteria formed well-defined aggregates on randomly oriented nanosized granular gold substrates. These aggregates consist of aligned ensembles of bacteria, with some of them strongly elongated. This kind of biological structure was not found on ordered engineered surfaces because bacterial alignment and cell-to-cell sticking were hindered. Importantly, differences in cell morphology, length, orientation, and flagellation were observed between bacteria attached on the ordered nano/microstructures and the randomly ordered surfaces. The implications of the results are related to the design of engineered surfaces to enhance (nanostructured filters) or inhibit (medical implants and industrial biofouling) bacterial colonization on the surfaces and to the biocontrol of soil ecosystems.

Filtrado del aire

El aire es el medio mas importante para la diseminación de microorganismos, por lo tanto su filtrado debe ser lo suficientemente efectivo como para retener la mayor cantidad. En hospitales e industria farmaceutica interesan los filtros cuya eficiencia se determina en función del número de particulas retenidas; son filtros de altisima eficiencia o absolutos. El segundo aspecto es la contaminación interior, que se soluciona con el flujo laminar