Effect of fluid contamination on reverse torque values in implant-abutment connections under oral conditions.

PURPOSE: Implant mechanical complications, including screw loosening, can influence dental implant success. It has been shown that torque values are affected by contamination occurred in implant-abutment (I/A) interface. This study aimed to examine the effects of blood, saliva, fluoride and chlorhexidine contamination on reverse torque values (RTVs) of abutment screws in oral conditions. MATERIALS AND METHODS: 50 fixtures were mounted into the stainless-steel holders and divided into five groups (n = 10). Except control group (NC), fixture screw holes in other groups were contaminated with chlorhexidine (CG), saliva (SG), blood (BG), or fluoride (FG). Abutment screws were tightened with a digital torque meter. I/A assemblies were subjected to thermocycling and cyclic loading. The mean RTVs were recorded and data were analyzed with one-way ANOVA and Tukey test. RESULTS: Except for specimens in SG (20.56 ± 1.33), other specimens in BG (21.11 ± 1.54), CG (22.89 ± 1.1) and FG (24.00 ± 1.12) displayed significantly higher RTVs compared to NC (19.00 ± 1.87). The highest RTVs were detected in CG and FG. CONCLUSION: The obtained data robustly suggest that RTVs were significantly affected by fluid contaminations. Specimens in FG and CG displayed the highest RTVs. Therefore, clinicians should have enough knowledge about probable contaminations in I/A interface in order to manage them during clinical procedure and to inform patients about using oral care products.

Retention and Clinical Performance of Zirconia Crowns: A Comprehensive Review.

Zirconia has been used for rehabilitation of edentulous spaces approximately for a decade, and there have been several reports regarding the clinical performance and retention of zirconia crowns. Outstanding mechanical properties, biocompatibility, and excellent aesthetics make zirconia-based crowns as a popular crown among the current all-ceramic crowns in restorative dentistry. However, restoration with a zirconia crown is a challenging treatment. The goal of this study was to assess the current literature to summarize the studies reporting the effective risk factors on retention of zirconia crowns to provide clinicians with a useful point of view in the decision-making process for use of these restorations. Literature based-search was performed to find related articles until August 2020 using EMBASE, Google Scholar, and MEDLINE. Search terms used were "zirconia restorations properties," "zirconia crowns clinical performance," "zirconia crown survival," "biological complications," and "zirconia crown retention." Results were limited to papers available in English. The references of all related literature were also searched for further citations. Overall, although clinical long-term and follow-up studies are a vital requirement to conclude that zirconia has great reliability, it seems that zirconia crown restorations are both well tolerated and sufficiently resistant.

Comparative Evaluation of Retentive Properties of Two Compatible Ball Attachments in Mandibular Implant-Retained Overdentures: An In Vitro Study.

OBJECTIVES: The retentive properties of implant-retained overdentures (IRO) may be influenced by the type of attachments. The aim of this research was to compare the retention of two dental implant systems with compatible ball attachments, namely Straumann® system (SS) and Rhein83 SRL system (RS) after fatigue testing. MATERIALS AND METHODS: Two laboratory models consisting of two parallel Straumann® fixtures at a distance of 22 mm were prepared. Five pairs of each systems' ball attachments were examined (n=5). The samples were soaked in artificial saliva. The retention strength values (RSV) were recorded before the fatigue test and after 1100, 2200, 3300, 4400, and 5500 insertion and removal cycles at a speed of 51 mm/minute with a 50-N load cell in a universal testing machine. The data were analyzed by repeated measures analysis of variance (ANOVA) followed by independent sample t-test with Bonferroni corrections. RESULTS: There was a decrease in the RSV in both systems after 5500 cycles of insertion and removal. There was a significant statistical difference between the RSV of the normal Sphero Block of the RS (17.52±0.68 N) and that of the Spare Lamella retention inserts of the SS (19.72±0.74 N, P=0.001). CONCLUSIONS: Although the RSVs of the RS and SS were almost similar before the fatigue test, as the number of insertion and removal cycles increased, the RSV decreased more significantly in the RS compared to the SS.

Marginal Adaptation and Internal Fit of Posterior 3-Unit Zirconia FPDs Fabricated with Different CAD/CAM Systems.

The purpose of this study was to compare the accuracy of zirconia FPDs fabricated by different laboratory CAD/CAM system. Thirty-six FPD zirconia frameworks were fabricated on corresponding epoxy resin models that were duplicated from a master model of mandibular second premolar and second molar mounted in an acrylic block to simulate missing first mandibular tooth. Frameworks were divided into groups (n = 12) of three laboratory CAD/CAM systems: Cercon, Amann Girrbach, and Zirkonzahn. For the two factors, system and abutment type, the absolute marginal discrepancy (AMD) was measured before cementation. Internal fit was also determined at three sites after cementation. The data were analyzed statistically (α = 0.05). The effects of system and tooth type were not significant for AMD (p ⟩ 0.05). Both factors showed influence on the internal fit of FPDs (p ⟨ 0.05). Molars showed larger gaps in axial and occlusal sites (p = 0.001 and p = 0.003), and Cercon led in better occlusal adaptation compared with Amann Girrbach (p = 0.013). The systems tested did not show differences in AMD, despite different incorporated components. However, internal fit was significantly different between tooth type and system.

Effect of cement type on microleakage of cast post-and-core systems under cyclic loading / Efeito do tipo de cimento na microinfiltração de núcleos metálicos fundidos submetidos à fadiga cíclica

Objective: The purpose of this study was to compare the microleakage of four cements in cast post-andcoresystems under cyclic loading. Materials and methods: Sixty-four human premolars were sectionedat the cement-enamel junction, endodontically treated, and divided into four groups (n = 16). Cast postsand cores were fabricated for root segments and were cemented with zinc phosphate cement (Harvard),resin-modified glass ionomer (Fuji PLUS), dual-cured phosphate methacrylate resin cement (Panavia F),or a dual-cured resin cement (Variolink II). All specimens underwent thermal cycling for 1.500 cycleswith 5 °C and 55 °C, with a dwelling time of 12 seconds. Half of the specimens of each group were subjectedto cycling loading with 50 N at 1.2 Hz for 750,000 cycles. Specimens were then immersed in 5%basic fuchsin solution for 24 hours. Specimens were sectioned, visualized by stereomicroscope under40x magnification and scored for dye penetration. The ratio between the length of the interface and thelength of dye penetration was also determined. Microleakage differences between the four cements were analyzed by Kruskal-Wallis test, and the effect of fatigue was analyzed with Mann-Whitney nonparametrictest (α =.05). Results: No failures occurred during fatigue testing. The zinc phosphate cement showedsignificantly higher microleakage values compared to other cements under both unloaded and loadedconditions (p = .007 and p = .006). Fatigue significantly increased the microleakage in all groups (p < .05).Conclusions: The microleakage values for the resin cements and the resin-modified glass ionomer weresimilar and significantly less than those of zinc phosphate, irrespective of loading. Fatigue loading increasedthe microleakage values for all the cements.

Objetivo: O objetivo deste estudo foi comparar a microinfiltração de pinos e núcleos de preenchimento metálicoscimentados com quatro diferentes materiais. Materiais e Métodos: 64 pré-molares humanos foram seccionadosna junção cemento-esmalte, tratados endodonticamente e divididos em quatro grupos (n = 16). Pinos enúcleos metálicos fundidos foram fabricados e cimentados com cimento de fosfato de zinco (Harvard), cimentode ionômero de vidro modificado (Fuji Plus), cimento resinoso dual de metacrilato fosfato (Panavia F) e cimentoresinoso dual (Variolink II). Todos os espécimes foram submetidos à ciclagem térmica (1.500 ciclos a 5-55 °C, 12segundos de banho). Metade dos espécimes de cada grupo foi submetida a uma carga cíclica de 50 N a 1,2 Hz emum total de 750.000 ciclos. Após a ciclagem, os espécimes foram imersos em solução de fucsina básica 5% por24 horas, seccionados, visualizados sob aumento de 40x e ranqueados quanto à penetração do corante. A proporçãoentre o comprimento da interface e o comprimento da penetração do corante foi também determinada.As diferenças de infiltração entre os quatro cimentos foram analisadas por teste de Kruskal-Wallis e o efeito dafadiga foi analisado por teste não paramétrico de Mann-Whitney (α = 0,05). Resultados: Não ocorreram falhasdurante o teste de fadiga. O cimento de fosfato de zinco mostrou valores de infiltração significativamente maiorescomparados aos demais cimentos na ausência ou presença da fadiga (p = 0,007 e p = 0,006). A fadiga elevousignificativamente a microinfiltração em todos os grupos (p < 0,05). Conclusões: Os valores de microinfiltraçãopara os cimentos resinosos e para o cimento de ionômero de vidro modificado foram similares e inferiores àquelesdo cimento de fosfato de zinco, independente da aplicação do teste de fadiga. A fadiga elevou os valores de microinfiltraçãopara todos os cimentos.

Using neutral zone concept in prosthodontic treatment of a patient with brain surgery: a clinical report.

The prosthodontic treatment of a patient who had undergone brain surgery to resect a brain stem astrocytoma has been described. Since the motor innervation to the oral muscles was impaired, the new neutral zone was recorded by using a tissue conditioner material. The teeth and polished surfaces of the mandibular partial denture fitted to the functional cheek anatomy of the surrounding tissue helped in the stability of the denture and to avoid the end tongue biting.

Disinfection efficiency of irreversible hydrocolloid impressions using different concentrations of sodium hypochlorite: a pilot study.

AIM: Dental impressions are potential sources of bacterial contamination which could eventually lead to transmissible infectious diseases through the blood or saliva. Sodium hypochlorite is an effective disinfectant recommended by the American Dental Association (ADA) in a 1:10 dilution for a ten minute immersion to disinfect irreversible hydrocolloid impressions. As the ADA protocol is sometimes neglected in busy practice settings, this pilot study was designed to determine an efficient and effective protocol for disinfection of irreversible hydrocolloid impressions. METHODS AND MATERIALS: Various concentrations of sodium hypochlorite and disinfection times were challenged against irreversible hydrocolloid impressions contaminated with six Gram-positive and Gram-negative bacteria. RESULTS: A two minute immersion time in a 0.6% solution of sodium hypochlorite protocol was found to prevent bacterial growth on the impressions. CONCLUSION: Disinfection of irreversible hydrocolloid impressions in a 0.6% solution of sodium hypochlorite for two minutes was as effective as the ADA's protocol of using a 0.5% sodium hypochlorite solution for ten minutes to destroy the test bacteria.