Melanin Nanoparticles Obtained from Preformed Recombinant Melanin by Bottom-Up and Top-Down Approaches.

Melanin is an insoluble, amorphous polymer that forms planar sheets that aggregate naturally to create colloidal particles with several biological functions. Based on this, here, a preformed recombinant melanin (PRM) was utilized as the polymeric raw material to generate recombinant melanin nanoparticles (RMNPs). These nanoparticles were prepared using bottom-up (nanocrystallization-NC, and double emulsion-solvent evaporation-DE) and top-down (high-pressure homogenization-HP) manufacturing approaches. The particle size, Z-potential, identity, stability, morphology, and solid-state properties were evaluated. RMNP biocompatibility was determined in human embryogenic kidney (HEK293) and human epidermal keratinocyte (HEKn) cell lines. RMNPs prepared by NC reached a particle size of 245.9 ± 31.5 nm and a Z-potential of -20.2 ± 1.56 mV; 253.1 ± 30.6 nm and -39.2 ± 0.56 mV compared to that obtained by DE, as well as RMNPs of 302.2 ± 69.9 nm and -38.6 ± 2.25 mV using HP. Spherical and solid nanostructures in the bottom-up approaches were observed; however, they were an irregular shape with a wide size distribution when the HP method was applied. Infrared (IR) spectra showed no changes in the chemical structure of the melanin after the manufacturing process but did exhibit an amorphous crystal rearrangement according to calorimetric and PXRD analysis. All RMNPs presented long stability in an aqueous suspension and resistance to being sterilized by wet steam and ultraviolet (UV) radiation. Finally, cytotoxicity assays showed that RMNPs are safe up to 100 µg/mL. These findings open new possibilities for obtaining melanin nanoparticles with potential applications in drug delivery, tissue engineering, diagnosis, and sun protection, among others.

Childhood leukemias in Mexico: towards implementing CAR-T cell therapy programs.

Leukemias are the most common type of pediatric cancer around the world. Prognosis has improved during the last decades, and many patients are cured with conventional treatment as chemotherapy; however, many patients still present with a refractory disease requiring additional treatments, including hematopoietic stem cell transplantation. Immunotherapy with monoclonal antibodies or cellular therapy is a promising strategy for treating refractory or relapsed hematological malignancies. Particularly, CAR-T cells have shown clinical efficacy in clinical trials, and different products are now commercially approved by regulatory agencies in the USA and Europe. Many challenges still need to be solved to improve and optimize the potential of these therapies worldwide. Global access to cell therapy is a significant concern, and different strategies are being explored in the middle- and low-income countries. In Mexico, leukemias represent around 50% of total cancer diagnosed in pediatric patients, and the rate of relapsed or refractory disease is higher than reported in other countries, a multi-factorial problem. Although significant progress has been made during the last decades in leukemia diagnosis and treatment, making new therapies available to Mexican patients is a priority, and cell and gene therapies are on the horizon. Efforts are ongoing to make CAR-T cell therapy accessible for patients in Mexico. This article summarizes a general landscape of childhood leukemias in Mexico, and we give a perspective about the current strategies, advances, and challenges ahead to make gene and cell therapies for leukemia clinically available.

Evaluation of Poly-3-Hydroxybutyrate (P3HB) Scaffolds Used for Epidermal Cells Growth as Potential Biomatrix.

Advances in tissue engineering have made possible the construction of organs and tissues with the use of biomaterials and cells. Three important elements are considered: a specific cell culture, an adequate environment, and a scaffold. The present study aimed to develop P3HB scaffolds by 3D printing and evaluate their biocompatibility with HaCaT epidermal cells, as a potential model that allows the formation of functional tissue. By using a method of extraction and purification with ethanol and acetone, a biopolymer having suitable properties for use as a tissue support was obtained. This polymer exhibited a higher molecular weight (1500 kDa) and lower contact angle (less than 90°) compared to the material obtained using the conventional method. The biocompatibility analysis reveals that the scaffold obtained using the ethanol-acetone method and produced by 3D printing without pores was not cytotoxic, did not self-degrade, and allowed high homogenous cell proliferation of HaCaT cells. In summary, it is possible to conclude that the P3HB scaffold obtained by 3D printing and a simplified extraction method is a suitable support for the homogeneous development of HaCaT keratinocyte cell lineage, which would allow the evaluation of this material to be used as a biomatrix for tissue engineering.

Chimeric Antigen Receptor-T Cells: A Pharmaceutical Scope.

Cancer is among the leading causes of death worldwide. Therefore, improving cancer therapeutic strategies using novel alternatives is a top priority on the contemporary scientific agenda. An example of such strategies is immunotherapy, which is based on teaching the immune system to recognize, attack, and kill malignant cancer cells. Several types of immunotherapies are currently used to treat cancer, including adoptive cell therapy (ACT). Chimeric Antigen Receptors therapy (CAR therapy) is a kind of ATC where autologous T cells are genetically engineered to express CARs (CAR-T cells) to specifically kill the tumor cells. CAR-T cell therapy is an opportunity to treat patients that have not responded to other first-line cancer treatments. Nowadays, this type of therapy still has many challenges to overcome to be considered as a first-line clinical treatment. This emerging technology is still classified as an advanced therapy from the pharmaceutical point of view, hence, for it to be applied it must firstly meet certain requirements demanded by the authority. For this reason, the aim of this review is to present a global vision of different immunotherapies and focus on CAR-T cell technology analyzing its elements, its history, and its challenges. Furthermore, analyzing the opportunity areas for CAR-T technology to become an affordable treatment modality taking the basic, clinical, and practical aspects into consideration.

Cytotoxicity, Post-Treatment Recovery, and Selectivity Analysis of Naturally Occurring Podophyllotoxins from Bursera fagaroides var. fagaroides on Breast Cancer Cell Lines.

Despite prevention and treatment options, breast cancer (BC) has become one of the most important issues in the present day. Therefore, the need for more specific and efficient compounds remains paramount. We evaluated four previously isolated aryltetralin lignans: 5'-demethoxy-ß-peltatin-A-methylether (1), acetylpodophyllotoxin (2), 5'-demethoxydeoxypodophyllotoxin (3), and 7',8'-dehydroacetylpodophyllotoxin (4) for cytotoxicity, clonogenicity, and selectivity against three BC cell lines: MCF-7, MDA-MB-231, and BT-549, as well as the non-tumorigenic mammary epithelial cell line MCF-10A. Cytotoxicity was evaluated after 72 h of treatment, and clonogenicity was determined at 72 h post-treatment; experiments were performed using the sulforhodamine B staining assay. Selective-index (SI) was calculated by comparing pure compound IC50 values in MCF-10A cell line against the IC50 of the same compound in cancer cell lines. Structural similarities among lignans and controls (podophyllotoxin and etoposide) were analyzed using the Tanimoto coefficient (Tc). Lignans were cytotoxic against all tested cell lines (0.011-7.22 µM) and clonogenicity testing showed a dose-dependent cytocidality for all lignans (≥0.08 µg/mL); compounds 2 and 3 were more potent (14.1 and 7.6 respectively) than etoposide in BT-549 cell line, while compound 2 displayed selectivity (SI = 28.17) in BT-549 cell line. Tc values of lignans suggested a greater similarity with podophyllotoxin structure.

Relevance of miR-21 in regulation of tumor suppressor gene PTEN in human cervical cancer cells.

BACKGROUND: Expression of the microRNA miR-21 has been found to be altered in almost all types of cancers and it has been classified as an oncogenic microRNA or oncomir. Due to the critical functions of its target proteins in various signaling pathways, miR-21 is an attractive target for genetic and pharmacological modulation in various cancers. Cervical cancer is the second most common cause of death from cancer in women worldwide and persistent HPV infection is the main etiologic agent. This malignancy merits special attention for the development of new treatment strategies. In the present study we analyze the role of miR-21 in cervical cancer cells. METHODS: To identify the downstream cellular target genes of upstream miR-21, we silenced endogenous miR-21 expression in a cervical intraepithelial neoplasia-derived cell lines using siRNAs. The effect of miR-21 on gene expression was assessed in cervical cancer cells transfected with the siRNA expression plasmid pSIMIR21. We identified the tumor suppressor gene PTEN as a target of miR-21 and determined the mechanism of its regulation throughout reporter construct plasmids. Using this model, we analyzed the expression of miR-21 and PTEN as well as functional effects such as autophagy and apoptosis induction. RESULTS: In SiHa cells, there was an inverse correlation between miR-21 expression and PTEN mRNA level as well as PTEN protein expression in cervical cancer cells. Transfection with the pSIMIR21 plasmid increased luciferase reporter activity in construct plasmids containing the PTEN-3'-UTR microRNA response elements MRE21-1 and MRE21-2. The role of miR-21 in cell proliferation was also analyzed in SiHa and HeLa cells transfected with the pSIMIR21 plasmid, and tumor cells exhibited markedly reduced cell proliferation along with autophagy and apoptosis induction. CONCLUSIONS: We conclude that miR-21 post-transcriptionally down-regulates the expression of PTEN to promote cell proliferation and cervical cancer cell survival. Therefore, it may be a potential therapeutic target in gene therapy for cervical cancer.

Serum leptin is associated with metabolic syndrome in obese Mexican subjects.

BACKGROUND: The metabolic syndrome (MetS) is a cluster of metabolic abnormalities including insulin resistance, dyslipidemia, high blood pressure, and abdominal adiposity. Obese patients develop leptin resistance, and an increased waist circumference (WC) due to deposition of abdominal fat. The aim of this study was to evaluate the association between circulating leptin levels and MetS among sample adult Mexican workers. METHOD: A total of 204 workers aged 20-56 were evaluated. Anthropometric index, blood pressure, fasting plasma glucose, and lipid profile were measured by spectrophotometric methods. Fasting insulin and leptin were measured by inmunoenzimatic methods. Furthermore, homeostasis model assessment for insulin resistance (HOMA-IR) was calculated. RESULTS: The prevalence of MetS according to the ATP-III criteria was 33.8% and leptin concentrations were 2.5 times higher in women than men. Subjects with MetS had higher levels of leptin (26.7 ± 13.7) compared with those without MetS (20.1 ± 13.9; P <0.001). Leptin increased significantly while BMI increased as well (normal 14.0 ± 8.9, overweight 22.7 ± 11.7 and obese 31.4 ± 14.6) in addition to other variables such as WC, HDL-C, insulin levels, and HOMA index. Each component of MetS was stratified by sex and submitted by linear regression with a 95% of accuracy. The 50% and 53% of the BMI is explained by the concentration of leptin in men and women, respectively (P < 0.001). CONCLUSION: This study found that leptin was associated with the MetS, especially in obesity and insulin resistance, indicating a high risk for university workers to develop hypertension, DM2, and cardiovascular disease.

Effect of controlled redox potential and dissolved oxygen on the in vitro refolding of an E. coli alkaline phosphatase and chicken lysozyme.

The development of efficient purification strategies of recombinant active protein derived from inclusion bodies requires the knowledge of the effect of environmental variables, such as redox potential (RP) and dissolved oxygen tension (DOT), in order to control the protein folding process. However, that information is scarce and only few in vitro studies of the impact of such variables have been reported under constant controlled conditions. In this work, the effect of controlled RP and DOT on the refolding of E. coli alkaline phosphatase (AP) and chicken lysozyme (CL) enzymes were studied. Disulphide bonds of both enzymes were reduced in an instrumented vessel using 2-mercaptoethanol and nitrogen. In the latter case, guanidine hydrochloride was also used to denature the protein. Such conditions caused protein conformational changes, as determined by the intrinsic fluorescence spectra that correlated with a decrease on the activity in both cases. Reduced enzymes were then oxidized, under different constant and predetermined RP or DOT, by manipulating the gas composition in the vessel. Folding kinetics were followed as the recovery of enzyme activity. Results showed that the percentage of recovery and rate of increase of enzymatic activity directly depended on the RP and DOT. A higher folding efficiency was found under controlled DOT compared to controlled RP conditions. These results are useful for establishing protein folding strategies to improve the recovery of active protein from inclusion bodies.

Control of redox potential in hybridoma cultures: effects on MAb production, metabolism, and apoptosis.

Culture redox potential (CRP) has proven to be a valuable monitoring tool in several areas of biotechnology; however, it has been scarcely used in animal cell culture. In this work, a proportional feedback control was employed, for the first time, to maintain the CRP at different constant values in hybridoma batch cultures for production of a monoclonal antibody (MAb). Reducing and oxidant conditions, in the range of -130 and +70 mV, were maintained in 1-l bioreactors through automatic control of the inlet gas composition. Cultures at constant DOT, in the range of 3 and 300 %, were used for comparison. The effect of constant CRP on cell concentration, MAb production, metabolism of glucose, glutamine, thiols, oxygen consumption, and programmed cell death, was evaluated. Reducing conditions resulted in the highest viable cell and MAb concentrations and thiols production, whereas specific glucose and glutamine consumption rates remained at the lowest values. In such conditions, programmed cell death, particularly apoptosis, occurred only after nutrient exhaustion. The optimum specific MAb production rate occurred at intermediate CRP levels. Oxidant conditions resulted in a detrimental effect in all culture parameters, increasing the specific glucose, glutamine, and oxygen consumption rates and inducing the apoptotic process, which was detected as early as 24 h even when glutamine and glucose were present at non-limiting concentrations. In most cases, such results were similar to those obtained in control cultures at constant DOT.

Heterogeneous conditions in dissolved oxygen affect N-glycosylation but not productivity of a monoclonal antibody in hybridoma cultures.

It is known that heterogeneous conditions exist in large-scale animal cell cultures. However, little is known about how heterogeneities affect cells, productivities, and product quality. To study the effect of non-constant dissolved oxygen tension (DOT), hybridomas were subjected to sinusoidal DOT oscillations in a one-compartment scale-down simulator. Oscillations were forced by manipulating the inlet oxygen partial pressure through a feedback control algorithm in a 220-mL bioreactor maintained at a constant agitation. Such temporal DOT oscillations simulate spatial DOT gradients that can occur in large scales. Different oscillation periods, in the range of 800 to 12,800 s (axis of 7% (air saturation) and amplitude of 7%), were tested and compared to constant DOT (10%) control cultures. Oscillating DOT decreased maximum cell concentrations, cell growth rates, and viability indexes. Cultures at oscillating DOT had an increased glycolytic metabolism that was evidenced by a decrease in yield of cells on glucose and an increase in lactate yield. DOT gradients, even several orders of magnitude higher than those expected under practical large-scale conditions, did not significantly affect the maximum concentration of an IgG(1) monoclonal antibody (MAb). The glycosylation profile of the MAb produced at a constant DOT of 10% was similar to that reported in the literature. However, MAb produced under oscillating culture conditions had a higher amount of triantennary and sialylated glycans, which can interfere with effector functions of the antibody. It was shown that transient excursions of hybridomas to limiting DOT, as occurs in deficiently mixed large-scale bioreactors, is important to culture performance as the oscillation period, and thus the time cells spent at low DOT, affected cell growth, metabolism, and the glycosylation pattern of MAb. Such results underline the importance of monitoring protein characteristics for the development of large-scale processes.