Heterogeneous porous PLLA/PCL fibrous scaffold for bone tissue regeneration.

Bone tissue engineering has become one of the most promising therapeutic methods to treat bone defects. A suitable scaffolding material to regenerate new bone tissues should have a high specific surface area, high porosity and a suitable surface structure which benefit cell attachment, proliferation, and differentiation. In this study, an acetone post-treatment strategy was developed to generate heterogeneous structure. After PLLA/PCL nanofibrous membranes were electrospun and collected, they were treated with acetone to generate a highly porous structure. Meanwhile, part of PCL was extracted from the fibre and enriched on the fibre surface. The cell affinity of the nanofibrous membrane was verified by human osteoblast-like cells assay. The proliferation rate of heterogeneous samples increased 190.4 %, 265.5 % and 137.9 % at day 10 compared with pristine samples. These results demonstrated that the heterogeneous PLLA/PCL nanofibrous membranes could enhance osteoblast adhesion and proliferation. With high surface area (average surface area 36.302 m2/g) and good mechanical properties (average Young's modulus 1.65 GPa and average tensile strength 5.1 MPa), the heterogeneous PLLA/PCL membrane should have potential applications in the field of bone regeneration.

Hierarchical Porous Recycled PET Nanofibers for High-Efficiency Aerosols and Virus Capturing.

Plastic crisis, especially for poly(ethylene terephthalate) (PET) bottles, has been one of the greatest challenges for the earth and human beings. Processing recycled PET (rPET) into functional materials has the dual significance of both sustainable development and economy. Providing more possibilities for the engineered application of rPET, porous PET fibers can further enhance the high specific surface area of electrospun membranes. Here, we use a two-step strategy of electrospinning and postprocessing to successfully control the surface morphology of rPET fibers. Through a series of optical and thermal characterizations, the porous morphology formation mechanism and crystallinity induced by solvents of rPET fibers were discussed. Then, this work further investigated both PM2.5 air pollutants and protein filtration performance of rPET fibrous membrane. The high capture capability of rPET membrane demonstrated its potential application as an integrated high-efficiency aerosol filtering solution.

Polydopamine-assisted grafting of chitosan on porous poly (L-lactic acid) electrospun membranes for adsorption of heavy metal ions.

In this study, a versatile method for the manufacturing of chitosan-grafted porous poly (L-lactic acid) (P-PLLA) nanofibrous membrane by using polydopamine (PDA) as an intermediate layer has been developed. P-PLLA fibres were electrospun and collected as nano/micro fibrous membranes. Highly porous fibres could serve as a substrate for chitosan to adsorb heavy metal ions. Moreover, PDA was used to modify P-PLLA surface to increase the coating uniformity and stability of chitosan. Due to the very high surface area of P-PLLA membranes and abundant amine groups of both PDA and chitosan, the fabricated membranes were utilized as adsorbent for removal of copper (Cu2+) ions from the wastewater. The adsorption capability of Cu2+ ions was examined with respect to the PDA polymerization times, pH, initial metal ion concentration and time. Finally, the equilibrium adsorption data of chitosan-grafted membranes fitted well with the Langmuir isotherm with the maximum adsorption capacity of 270.27 mg/g.

Ultrafast bone-like apatite formation on highly porous poly(l-lactic acid)-hydroxyapatite fibres.

In order to provide a favourable environment for living bone formation, it is an essential condition to grow bone-like apatite layer at the interface between the tissue-implant and its surrounding tissues. Inspired by the chemical composition and the nano porous structure of natural bones, we developed an ultrafast and accessible route to accelerate effectively the formation of bone-like apatite on the surface of porous poly(l-lactic acid)-hydroxyapatite (PLLA-HA) composite fibres in 5 times simulated body fluid (5SBF). The key of the method lays in successful exposure of HA nanoparticles on the surface of PLLA fibres by acetone treatment of electrospun PLLA-HA nano/micro fibres. The recrystallization of PLLA chains uncovers more HA nanoparticles on the surface of every fibre which provide nucleation sites for calcium and phosphate ions. After only 2 h of immersing in 5SBF, a full layer of apatite completely covered on the surface of porous PLLA-HA fibres. The results indicate that HA nanoparticles on porous fibre surface can accelerate the kinetic deposition of apatite on fibre surface. Biological in vitro cell culture with human osteoblast-like cell for up to 7 days demonstrates that the incorporation of HA nanoparticles on the surface of porous PLLA fibrous membranes leads to significant enhance osteoblast adhesion and proliferation. The route can open avenues for development of fibrous PLLA biomaterials for hard tissue repair and substitution.

Porous poly(L-lactic acid)/chitosan nanofibres for copper ion adsorption.

Porous poly(L-lactic acid) (PLLA) nanofibrous membrane with the high surface area was developed by electrospinning and post acetone treatment and used as a substrate for deposition of chitosan. Chitosan was coated onto porous nanofibrous membrane via direct immersion coating method. The porous PLLA/chitosan structure provided chitosan a high surface framework to fully and effectively adsorb heavy metal ions from water and showed higher and faster ion adsorption. The composite membrane was used to eliminate copper ions from aqueous solutions. Chitosan acts as an adsorbent due to the presence of aminic and hydroxide groups which are operating sites for the capture of copper ions. The maximum adsorption capacity of copper ions reached 111.66 ± 3.22 mg/g at pH (7), interaction time (10 min) and temperature (25 °C). The adsorption kinetics of copper ions was established and was well agreed with the second-order model and Langmuir isotherm. Finally, the thermodynamic parameters were studied.

EcoFlex Sponge with Ultrahigh Oil Absorption Capacity.

A paraffin microsphere-templated 3D porous EcoFlex sponge was prepared to selectively absorb oil or chemicals from water. The technology for producing this EcoFlex sponge does not need complicated synthesis processes or instruments, and the materials applied in this work are ecofriendly. Therefore, this sponge can be employed in the environmental field. EcoFlex sponges showed high hydrophobicity (contact angle = 140-143°) and oleophilicity. The developed sponge exhibits a porous three-dimensional framework inside with excellent internal connectivity, which contributes both better absorption capacity and faster absorption rate. For instance, the absorption capacity for chloroform can reach 3400 wt %. The absorption capacity of the sponge was optimized using different size of paraffin microspheres and these sponges exhibit relatively high absorption capacity in a short time (2 min). The volume of sponge expands in some oils and organic solvents: the increased volume capacity for hexane can reach 2200%. This sponge also has great recovery capability and durability; it keeps its original shape and absorption capacity after 15 cycles of oil absorption and compression.