Morphed aflaxotin concentration produced by Aspergillus flavus strain VKMN22 on maize grains inoculated on agar culture.

This study identified and monitored the levels of aflatoxins (B1 and B2) produced by Aspergillus flavus isolate VKMN22 (OP355447) in maize samples sourced from a local shop in Johannesburg, South Africa. Maize samples underwent controlled incubation after initial rinsing, and isolates were identified through morphological and molecular methods. In another experiment, autoclaved maize grains were intentionally re-inoculated with the identified fungal isolate using spore suspension (106 spore/mL), after which 1 g of the contaminated maize sample was inoculated on PDA media and cultured for seven days. The aflatoxin concentrations in the A. flavus contaminated maize inoculated on culture media was monitored over seven weeks and then measured using liquid chromatography-mass spectroscopy (LC-MS). Results confirmed the successful isolation of A. flavus strain VKMN22 with accession number OP355447, which consistently produced higher levels of AFB1 compared to AFB2. AF concentrations increased from week one to five, then declined in week six and seven. AFB1 levels ranged from 594.3 to 9295.33 µg/kg (week 1-5) and then reduced from 5719.67 to 2005 µg/kg in week six and seven), while AFB2 levels ranged from 4.92 to 901.67 µg/kg (weeks 1-5) and then degraded to 184 µg/kg in week six then 55.33 µg/kg (weeks 6-7). Levene's tests confirmed significantly higher mean concentrations of AFB1 compared to AFB2 (p ≤ 0.005). The study emphasizes the importance of consistent biomonitoring for a dynamic understanding of AF contamination, informing accurate prevention and control strategies in agricultural commodities thereby safeguarding food safety.

Recent advancements in the use of plastics as a carbon source for carbon nanotubes synthesis - A review.

Plastics, which majorly consist of polypropylene (PP), polyethylene (linear low-density polyethylene (LLDPE), low-density polyethylene (LDPE) and high-density polyethylene (HDPE)), polystyrene (PS), polyvinyl chloride (PVC), polyethylene terephthalate (PET), etc., are the most abundant municipal solid wastes (MSW). They have been utilized as a cheap carbon feedstock in the synthesis of carbon nanotubes (CNTs) because of their high hydrocarbon content, mainly carbon and hydrogen, especially for the polyolefins. In this review, the detailed progress made so far in the use of plastics (both waste and virgin) as cheap carbon feedstock in the synthesis of CNTs (only) over the years is studied. The primary aim of this work is to provide an expansive landscape made so far, especially in the areas of catalysts, catalyst supports, and the methods employed in their preparations and other operational growth conditions, as well as already explored applications of plastic-derived CNTs. This is to enable researchers to easily access, understand, and summarise previous works done in this area, forging ahead towards improving the yield and quality of plastic-derived CNTs, which could extend their market and use in other purity-sensitive applications.

In vitro and in vivo effect of oxytetracycline on sperm parameters in breeding rooster.

BACKGROUND: Some antimicrobials could adversely affect sperm quality during sperm cryopreservation and antibiotic treatment with subsequent effects on fertility outputs. To our knowledge, no similar studies have been conducted on breeding roosters, especially for oxytetracycline (OTC). OBJECTIVE: To investigate both in vitro and in vivo impact of oxytetracycline on sperm parameters in breeding roosters. METHODS: Sperm motility parameters were objectively analyzed using the CASA system including total motility (TM %), progressive motility (PM %), all sperm velocities, the sperm count, and cell viability during 9 days of in vivo treatment. In the in vitro investigation, the pooled sperm was diluted and divided into a control aliquot (diluted in 0.9% NaCl) and treated samples. Motility parameters were assessed after 0, 1, 2, 3, 4, 5, and 6 hours of storage at 37ºC. In the in vivo study, 1 g per L of OTC was administrated to five individuals for nine consecutive days. Fresh semen samples were analyzed at T0 (before treatment) and after 6 (T6) and 9 days (T9) of treatment. RESULTS: OTC caused significant impairment of sperm quality in vivo. A drastic reduction in sperm concentration, viability, TM, PM, and all kinematic parameters was observed after 6 days of treatment. However, at day 9 sperm quality had improved to be nearly similar to T0. In vitro, OTC induced similar sperm impairment on all sperm motility parameters. CONCLUSION: Oxytetracycline exhibited negative effects on rooster sperm both in vivo and in vitro and appears consequently not suitable in cryopreservation extenders. Doi.org/10.54680/fr23510110412.

Zeolitic imidazolate framework as humidity-resistant solid state-chemiresistive gas sensors: A review.

With significant technological advances, solid-state gas sensors have been extensively applied to detect toxic gases and volatile organic compounds (VOCs) in confined areas such as indoor environments and industries and to identify gas leakage. Semiconductor metal oxides are the primary sensing materials, although their major drawbacks include a lack of sensitivity, poor performance at high humidity, and operating at high temperatures ranging between 140 and 400 °C. Recently, the use of zeolitic imidazolate frameworks (ZIFs) in gas sensors has received considerable attention as a promising material to overcome the drawbacks possessed by semiconductor metal oxide-based gas sensors. Because of their unique properties, including size tunability, high surface area, and stability in humidity, ZIF becomes a preferred candidate for sensing materials. The use of ZIF materials in gas sensors is limited because of their high-temperature operation and low gas responses. This review outlines the strategies and developments in the utilization of ZIF-based materials in gas sensing. The significant influence of the addition of carbon additives in ZIF materials for temperature operation sensors is discussed. Finally, ZIF-carbon additives and SMO@ZIFs/carbon additives are the proposed materials to be studied for future prospects for the detection of VOCs at low temperatures and exhibiting good selectivity towards the gas of interest.

Exploration of the Different Dimensions of Wurtzite ZnO Structure Nanomaterials as Gas Sensors at Room Temperature.

In this work, we report on the synthesis of four morphologies of ZnO, namely, nanoparticles, nanorods, nanosheets, and nanoflowers, from a single precursor Zn(CH3COO)2·2H2O under different reaction conditions. The synthesised nanostructured materials were characterised using powder X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Raman spectroscopy, UV-Vis, XPS analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and nitrogen sorption at 77 K. The XRD, FTIR, and Raman analyses did not reveal any significant differences among the nanostructures, but differences in the electronic properties were noted among the different morphologies. The TEM and SEM analyses confirmed the four different morphologies of the ZnO nanostructures. The textural characteristics revealed that the specific surface areas were different, being 1.3, 6.7, 12.7, and 26.8 m2/g for the nanoflowers, nanoparticles, nanorods, and nanosheets, respectively. The ZnO nanostructures were then mixed with carbon nanoparticles (CNPs) and cellulose acetate (CA) to make nanocomposites that were then used as sensing materials in solid-state sensors to detect methanol, ethanol, and isopropanol vapour at room temperature. The sensors' responses were recorded in relative resistance. When detecting methanol, 6 out of 12 sensors were responsive, and the most sensitive sensor was the composite with a mass ratio of 1:1:1 of ZnO nanorods:CNPs:CA with a sensitivity of 0.7740 Ω ppm-1. Regarding the detection of ethanol vapour, 9 of the 12 sensors were responsive, and the 3:1:1 mass ratio with ZnO nanoparticles was the most sensitive at 4.3204 Ω ppm-1. Meanwhile, with isopropanol, 5 out of the 12 sensors were active and, with a sensitivity of 3.4539 Ω ppm-1, the ZnO nanoparticles in a 3:1:1 mass ratio were the most sensitive. Overall, the response of the sensors depended on the morphology of the nanostructured ZnO materials, the mass ratio of the sensing materials in the composites, and the type of analyte. The sensing mechanism was governed by the surface reaction on the sensing materials rather than pores hindering the analyte molecules from reaching the active site, since the pore size is larger than the kinetic diameter of the analyte molecules. Generally, the sensors responded well to the ethanol analyte, rather than methanol and isopropanol. This is due to ethanol molecules displaying a more enhanced electron-donating ability.

Corn Cob Char as Catalyst Support for Developing Carbon Nanotubes from Waste Polypropylene Plastics: Comparison of Activation Techniques.

The future and continuity of nanomaterials are heavily dependent on their availability and affordability. This could be achieved when cheap materials are actively employed as starting materials for nanomaterials synthesis. In this study, waste corn cob char was used as support during the preparation of the NiMo catalyst, and the effect of different char-activating techniques on the microstructure, yield and quality of carbon nanotubes (CNTs) obtained from waste polypropylene (PP) plastics using the chemical vapor deposition (CVD) technique was investigated. Properties of the catalysts and obtained nanomaterials were evaluated by XRD, SEM, N2 physisorption experiment, FTIR, Raman spectroscopy and TEM. Results showed improved surface properties of the NiMo catalyst supported on chemically (NiMo/ACX) and physically activated char (NiMo/ACT) compared to the NiMo catalyst supported on non-activated char (NiMo/AC0). High-quality CNTs were deposited over NiMo/ACT compared to NiMo/ACX and NiMo/AC0. It was also observed that different activation methods resulted in the formation of CNTs of different microstructures and yield. Optimum yield (470.0 mg CNTs/g catalyst) was obtained with NiMo/AC0, while NiMo/ACT gave the least product yield (70.0 mg CNTs/g catalyst) of the as-produced nanomaterials. Based on the results of the analysis, it was concluded that utilizing a cheap pyrogenic product of waste corn cob as a catalyst support in a bimetallic NiMo catalyst could offer a promising approach to mass producing CNTs and as a low-cost alternative in CNTs production from waste plastics.

Novel Chemoresistive Sensor for Sensitive Detection of Pb2+ Ions Using an Interdigital Gold Electrode Fabricated with a Reduced Graphene Oxide-Based Ion-Imprinted Polymer.

This study presents novel chemoresistive reduced graphene oxide-ion-imprinted polymer (IIP-rGO)-based sensors for detection of lead (Pb2+) ions. The ion-imprinted polymer was synthesized by bulk polymerization and modified with a variable amount of rGO incorporated to form an IIP-rGO composite. The amount of rGO in the polymer matrix affected the sensor's relative response, and 1:3 mass ratio produced excellent results, with a consistent trend as the concentration of Pb2+ ions increased in the solution. The decrease in relative resistance (ΔR/R o) followed an exponential decay relationship between the ΔR/R o response and the concentration of Pb2+ ions in aqueous solutions. After solving the exponential decay function, it is observed that the sensor has the upper limit of ΔR/R o >1.7287 µg L-1, and the limit of detection of the sensor is 1.77 µg L-1. A nonimprinted polymer (NIP)-based sensor responded with a low relative resistance of the same magnitude although the concentration was varied. The response ratio of the IIP-based sensor to the NIP-based sensor (ΔR/R o)IIP/(ΔR/R o)NIP as a function of the concentration of Pb2+ ions in the solution shows that the response ratios recorded a maximum of around 22 at 50 µg L-1 and then decreased as the concentration increased, following an exponential decay function with the minimum ratio of 2.09 at 200 µg L-1 but never read 1. The sensor showed excellent selectivity against the bivalent cations Mn2+, Fe2+, Sn2+, and Ti2+. The sensor was capable of exhibiting 90% ΔR/R o response repeatability in a consecutive test.

Concomitant in Situ FTIR and Impedance Measurements To Address the 2-Methylcyclopentanone Vapor-Sensing Mechanism in MnO2-Polymer Nanocomposites.

Polymer nanocomposite-based sensors were prepared using cellulose acetate (CA), carbon nanoparticles (CNPs), and manganese dioxide (MnO2) nanorods to detect and to understand the sensing mechanism of 2-methylcyclopentanone vapor. A sensor with a mass ratio of 1:1.5:3 of MnO2/CNPs/CA as well as MnO2/CA and MnO2/CNP composite and MnO2 sensors were prepared. The sensor with the three sensing materials combined exhibited an enhancement of response for 2-methylcyclopentanone vapor, ascribed to a synergistic effect between MnO2/CNPs/CA. An in situ Fourier-transform infrared (FTIR)-combined online LCR meter setup was used to understand the sensing mechanism of the sensor. The sensing mechanism involved a deep oxidation decomposition of the analyte to CO2. This was confirmed from the in situ FTIR-combined online LCR meter results, where a new distinct CO2 bending mode IR band was recorded. To optimize the performance of the sensor, the composites were prepared by varying the amount of metal oxide added into the composites; sensor A (composition of mass ratio 1:1.5:3), sensor B (composition of mass ratio 2:1.5:3), and sensor C (composition of mass ratio 2.5:1.5:3); their compositions are MnO2/CNPs/CA. The performance of sensor B was higher than that of the other two sensors. The sensors also show relatively good response-recovery time. All fabricated sensors were found to have the sensing ability regenerated after the analyte was removed from the system without losing its sensing and recovery abilities. The structural and morphological features of the samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy.

Chemical Vapour Deposition of MWCNT on Silica Coated Fe3O4 and Use of Response Surface Methodology for Optimizing the Extraction of Organophosphorus Pesticides from Water.

Multiwalled carbon nanotube (MWCNT) was fixed onto the surface of a magnetic silica (Fe3O4@SiO2) substrate via chemical vapour deposition (CVD). Acetylene gas was used as the carbon source and cobalt oxide as the catalyst. The chemical and physical characteristics of the materials were investigated by transmission electron microscopy (TEM), Raman spectroscopy (RS), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), and nitrogen adsorption/desorption isotherm. The synthesized Fe3O4@SiO2-MWCNT nanocomposite was used as a magnetic solid phase extraction (MSPE) adsorbent for the preconcentration of organophosphorus pesticides (OPPs), specifically, azinphos methyl, chlorpyrifos, parathion, and malathion. The factors influencing the extraction efficiency such as pH, contact time, and adsorbent dosage were investigated and optimized by response surface methodology (RSM) and desirability function. Linear response was obtained in the concentration range of 10-200 µg/L for the analytes with determination coefficients ranging between 0.9955 and 0.9977. The limits of detection (LODs) and quantification (LOQs) were in the range of 0.004-0.150 µg/L and 0.013-0.499 µg/L, respectively. Fe3O4@SiO2-MWCNT was applied in the extraction and subsequent determination of OPPs in water samples from Vaal River and Vaal Dam with recoveries ranging from 84.0 to 101.4% (RSDs = 3.8-9.6%, n = 3) in Vaal River and 86.2 to 93.8% (RSDs = 2.9-10.4%, n = 3) in Vaal Dam. The obtained results showed that the newly synthesized Fe3O4@SiO2-MWCNT nanocomposite can be an efficient adsorbent with good potential for the preconcentration and extraction of selected OPPs from aqueous media.

Presence of aflatoxin M1 in raw, reconstituted, and powdered milk samples collected in Algeria.

Aflatoxins are potent toxic metabolites produced by Aspergillus spp. Aflatoxin M1 (AFM1) is a metabolite of aflatoxin B1 that can be present in milk, and it is a public health concern. There is scarce information on the incidence of aflatoxin M1 contamination in milk consumed in Algeria. The presence of AFM1 was investigated in raw milk samples collected between February and October 2011 from 11 dairy farms representative of Algerian production conditions and that were located around Constantine city. Reconstituted and powdered milk samples were purchased from local supermarkets. The analysis was performed by liquid chromatography-fluorescence detection after immunoaffinity purification. AFM1 was detected in 5 out of 47 samples (11 %) at levels ranging from 9 to 103 ng/L, with one sample exceeding the limit of 50 ng/L set by European regulations. Traces of AFM1 (less than 8 ng/L) were also found in 11 other samples. The incidence of AFM1 contamination was higher in imported powdered milk (29 %) than in raw milk (5 %). Although the concentration of AFM1 in contaminated samples was low, the relatively considerable prevalence found in this exploratory study justifies more detailed and continuous monitoring to reduce consumers' exposure to AFM1.

Functionalized spherical carbon nanostructure/poly(vinylphenol) composites for application in low power consumption write-once-read-many times memories.

We apply functionalized carbon nanoshell and carbon sphere based composites in poly(vinylphenol) matrix in write-once-read-many-times memory elements. The devices based on carbon nanoshells show an ON/OFF current ratio of 10(5) and long-term information retention. The functionalized carbon nanoshells and carbon spheres show improved dispersion in the poly(vinylphenol) matrix, allowing the preparation of homogeneous films even at the submicrometer scale. The low ON current allows low power operation, dissipating less than 10(-4) J per square meter device active area during the write operation, which is the most energy consuming one.

Nitrogen-doped, boron-doped and undoped multiwalled carbon nanotube/polymer composites in WORM memory devices.

We report the preparation of write-once-read-many times memory devices using composites of carbon nanotubes and poly(vinyl phenol) sandwiched between Al electrodes. Three types of nanotubes (undoped multiwalled carbon nanotubes, nitrogen-doped multiwalled carbon nanotubes and boron-doped multiwalled carbon nanotubes) are investigated for this application. The OFF to ON state switching threshold is only slightly dependent on nanotube type, but the ON/OFF current ratio depends on both nanotube type and concentration and varies up to 10(6), decreasing for nanotube concentrations larger than 0.50 wt% in the composite.

Electronic detection of Drechslera sp. fungi in charentais melon ( Cucumis melo Naudin) using carbon-nanostructure-based sensors.

The development of chemical sensor technology in recent years has stimulated an interest regarding the use of characteristic volatiles and odors as a rapid and early indication of deterioration in fruit quality. The fungal infestation by Drechslera sp. in melons is a severe problem, and we demonstrate that electronic sensors based on carbon nanostructures are able to detect the presence of these fungi in melon. The responses of sensor conductance G and capacitance C at 27 kHz were measured and used to calculate their ΔG and ΔC variation over the full melon ripening process under shelf conditions with proliferation of Drechslera sp. fungi. The sensor response showed that these fungi can be electronically identified in charentais melon, constituting an effective and cheap test procedure to differentiate between infected and uninfected melon.

Composites of polyvinyl alcohol and carbon (coils, undoped and nitrogen doped multiwalled carbon nanotubes) as ethanol, methanol and toluene vapor sensors.

We investigate the chemical sensing behavior of composites prepared with polyvinyl alcohol and carbon materials (undoped multiwalled carbon nanotubes, nitrogen-doped multiwalled carbon nanotubes and carbon nanocoils). We determine the sensitivity of thin films of these composites for ethanol, methanol and toluene vapor, comparing their conductance and capacitance responses. The composite that exhibits highest sensitivity depends on specific vapor, vapor concentration and measured electrical response, showing that the interactivity of the carbon structure with chemical species depend on structural specificities of the carbon structure and doping.