Thermodynamic and structural properties of lipid-photosensitizer conjugates mixed with phospholipids: Impact on the formation and stability of nano-assemblies.

The photosensitizer Phenalenone (PN) was grafted with one or two lipid (C18) chains to form pure nano-assemblies or mixed lipid vesicles suitable for photodynamic therapy. Mixtures of PN-C18 conjugates with stearoyl-oleoyl phosphatidylcholine (SOPC) form vesicles that disintegrate into bilayer sheets as the concentration of PN-C18 conjugates increases. We hypothesized that PN-C18 conjugates control the thermodynamic and structural properties of the mixtures and induce the disintegration of vesicles due to PN π-π-interactions. Monolayers were analyzed by surface pressure and grazing incidence X-ray diffraction (GIXD) measurements, and vesicles by differential scanning calorimetry and cryo-TEM. The results showed that PN-triazole-C18 (1A) and PN-NH-C18 (1B) segregate from the phospholipid domains. PN-(C18)2 (conjugate 2) develops favorable interactions with SOPC and distearoyl-phosphatidylcholine (DSPC). GIXD demonstrates the contribution of SOPC to the structuring of conjugate 2 and the role of the major component in controlling the structural properties of DSPC-conjugate 2 mixtures. Above 10 mol% conjugate 2 in SOPC vesicles, the coexistence of domains with different molecule packing leads to conjugate segregation, vesicle deformation, and the formation of small bilayer discs stabilized by the inter-bilayer π-π stacking of PN molecules.

Electrografting and Langmuir-Blodgett: Covalently Bound Nanometer-Thick Ordered Films on Graphite.

We present two different molecular organizations obtained from octadecylamine (ODA) molecules on a highly oriented pyrolytic graphite (HOPG) surface: (i) self-organized physisorbed ODA molecules lying flat on the surface and (ii) a strongly electrografted compact crystalline monolayer of ODA molecules standing up on the surface. This new structure is obtained by combining the Langmuir-Blodgett transfer of an ODA Langmuir film onto HOPG with oxidative electrografting. The presence of an organic film on HOPG is characterized by attenuated total reflectance-infrared spectroscopy and Raman spectroscopy, while atomic force microscopy and scanning tunneling microscopy allow the observation of the two molecular organizations with adsorbed molecules lying flat on HOPG or strongly grafted in an upright position on the HOPG surface. Interestingly, the second molecular organization preserves a hexagonal symmetry and its lattice parameters are intermediate between those of ODA Langmuir films and that of the HOPG underlying surface. The functionalization of surfaces with organic films is a major issue in the design of sensors with biomedical applications or organic electronics and energy storage devices and these structures may find applications in these fields.

Real-time visualization of morphology-dependent self-motion of hyaluronic acid nanomaterials in water.

Drug delivery to target sites is often limited by inefficient particle transport through biological media. Herein, motion behaviors of spherical and nonspherical nanomaterials composed of hyaluronic acid were studied in water using real-time multiple particle tracking technology. The two types of nanomaterials have comparable surface compositions and surface potentials, and they have equivalent diameters. The analysis of nanomaterial trajectories revealed that particles with flattened morphology and a high aspect ratio, designated nanoplatelets, exhibited more linear trajectories and faster diffusion in water than nanospheres. Fitting the plots of mean square displacement vs. time scale suggests that nanoplatelets exhibited hyperdiffusive behavior, which is similar to the motion of living microorganisms. Furthermore, at 37 °C, the surface explored by a nanoplatelet was up to 33-fold higher than that explored by a nanosphere. This investigation on morphology-dependent self-motion of nanomaterials could have a significant impact on drug delivery applications by increasing particle transport through biological media.

Gemcitabine lipid prodrug nanoparticles: Switching the lipid moiety and changing the fate in the bloodstream.

A simple approach to achieve a lipoprotein (LP)-mediated drug delivery is to trigger the spontaneous drug insertion into endogenous lipoproteins in the bloodstream, by means of its chemical modification. Nanoparticles (NPs) made of the squalene-gemcitabine (SQGem) conjugate were found to have a high affinity for plasma lipoproteins while free gemcitabine did not, suggesting a key role of the lipid moiety in this event. Whether the drug conjugation to cholesterol, one of the major lipoprotein-transported lipids, could also promote an analogous interaction was a matter of question. NPs made of the cholesterol-gemcitabine conjugate (CholGem) have been herein thoroughly investigated for their blood distribution profile both in vitro and in vivo. Unexpectedly, contrarily to SQGem, no trace of the CholGem prodrug could be found in the lipoprotein fractions, nor was it interacting with albumin. The investigation of isolated NPs and NPs/LPs physical mixtures provided a further insight into the lack of interaction of CholGem NPs with LPs. Although essential for allowing the self-assembly of the prodrug into nanoparticles, the lipid moiety may not be sufficient to elicit interaction of the conjugated drug with plasma lipoproteins but the whole NP physicochemical features must be carefully considered.

Role of the interactions of soft hyaluronan nanomaterials with CD44 and supported bilayer membranes in the cellular uptake.

Increasing valence by acting on nanomaterial morphology can enhance the ability of a ligand to specifically bind to targeted cells. Herein, we investigated cell internalization of soft hyaluronic acid (HA) nanoplatelets (NPs) that exhibit a typical hexagonal shape, flat surfaces and high aspect ratio (Γ≈12 to 20), as characterized by atomic force microscopy in hydrated conditions. Fluorescence imaging revealed that internalization of HA-NPs by a T24 tumor cell line and by macrophages was higher than native polysaccharide in a dose-dependent and time-dependent manners. The ability of HA-NPs to efficiently compete with native HA assessed using Bio-layer interferometry showed that NPs had a stronger interaction with recombinant CD44 receptor compared to native HA. The results were discussed regarding physical properties of the NPs and the implication of multivalent interactions in HA binding to CD44. Experiments conducted on supported bilayer membranes with different compositions showed that non-specific interactions of NPs with lipid membranes were negligible. Our findings provide insights into intracellular drug delivery using soft HA-NPs through receptor-mediated multivalent interactions.

Functional Genomic and Biochemical Analysis Reveals Pleiotropic Effect of Congo Red on Aspergillus fumigatus.

Inhibition of fungal growth by Congo red (CR) has been putatively associated with specific binding to ß-1,3-glucans, which blocks cell wall polysaccharide synthesis. In this study, we searched for transcription factors (TFs) that regulate the response to CR and interrogated their regulon. During the investigation of the susceptibility to CR of the TF mutant library, several CR-resistant and -hypersensitive mutants were discovered and further studied. Abnormal distorted swollen conidia called Quasimodo cells were seen in the presence of CR. Quasimodo cells in the resistant mutants were larger than the ones in the sensitive and parental strains; consequently, the conidia of the resistant mutants absorbed more CR than the germinating conidia of the sensitive or parental strains. Accordingly, this higher absorption rate by Quasimodo cells resulted in the removal of CR from the culture medium, allowing a subset of conidia to germinate and grow. In contrast, all resting conidia of the sensitive mutants and the parental strain were killed. This result indicated that the heterogeneity of the conidial population is essential to promote the survival of Aspergillus fumigatus in the presence of CR. Moreover, amorphous surface cell wall polysaccharides such as galactosaminogalactan control the influx of CR inside the cells and, accordingly, resistance to the drug. Finally, long-term incubation with CR led to the discovery of a new CR-induced growth effect, called drug-induced growth stimulation (DIGS), since the growth of one of them could be stimulated after recovery from CR stress.IMPORTANCE The compound Congo red (CR) has been historically used for coloring treatment and histological examination as well to inhibit the growth of yeast and filamentous fungi. It has been thought that CR binds to ß-1,3-glucans in the fungal cell wall, disrupting the organization of the cell wall structure. However, other processes have been implicated in affecting CR sensitivity. Here, we explore CR susceptibility through screening a library of genetic null mutants. We find several previously uncharacterized genetic regulators important for CR susceptibility. Through biochemical and molecular characterization, we find cell membrane permeability to be important. Additionally, we characterize a novel cell type, Quasimodo cells, that occurs upon CR exposure. These cells take up CR, allowing the growth of the remaining fungi. Finally, we find that priming with CR can enhance long-term growth in one mutant.

Bioinspired polydopamine nanoparticles: synthesis, nanomechanical properties, and efficient PEGylation strategy.

Polydopamine (PDA) is a bioinspired fascinating polymer which is considered nowadays as a material of choice for designing drug delivery nanosystems. Indeed, PDA exhibits multiple interesting features including simple preparation protocols, biocompatibility, simple functionalization procedures, free radicals scavenging and photothermal/photoacoustic properties. However, because of its heterogeneous structure, clear procedures about PDA nanoparticles synthesis and PEGylation with well-defined and reproducible physicochemical properties such as size, shape and nanomechanics are still needed. In this work, we established tightly controlled experimental conditions to synthesize PDA nanoparticles with well-defined size and yield. This allowed us to identify the factors that affect the most these two parameters and to construct surface response plots with accurate predictive values of size and yield. The nanomechanical properties of PDA NPs exhibiting different sizes have been studied with AFM nanoindentation experiments. Our results demonstrated for the first time that the elasticity of PDA NPs was decreasing with their size. This could be explained by the higher geometric packing order of the stacked oligomeric fractions inside the core of the biggest PDA NPs. Next, in order to determine the best PEGylation experimental conditions of PDA NPs using thiol-terminated PEG that allow grafting the highest polymer density with proteins repelling properties, we have first optimized the PEGylation strategy on PDA films. By using a combination of QCM-D and AFM experiments, we could demonstrate that efficient PEGylation of PDA films could be done even at low PEG concentration but in the presence of NaCl which exerts a salting out effect on PEG chains improving thus the grafting density. Finally, we transposed these experimental conditions to PDA NPs and we could synthesize PEGylated PDA NPs exhibiting high stability in physiological conditions as revealed by FTIR and DLS experiments respectively.

Stacking as a Key Property for Creating Nanoparticles with Tunable Shape: The Case of Squalenoyl-Doxorubicin.

The development of elongated nanoparticles for drug delivery is of growing interest in recent years, due to longer blood circulation and improved efficacy compared to spherical counterparts. Squalenoyl-doxorubicin (SQ-Dox) conjugate was previously shown to form elongated nanoparticles with improved therapeutic efficacy and decreased toxicity compared to free doxorubicin. By using experimental and computational techniques, we demonstrate here that the specific physical properties of SQ-Dox, which include stacking and electrostatic interactions of doxorubicin as well as hydrophobic interactions of squalene, are involved in the formation of nanoassemblies with diverse elongated structures. We show that SQ-Dox bioconjugate concentration, ionic strength, and anion nature can be used to modulate the shape and stiffness of SQ-Dox nanoparticles. As those parameters are involved in nanoparticle behavior in biological media, these findings could bring interesting opportunities for drug delivery and serve as an example for the design of original nanodrugs with stacking properties tuned for particular clinical purposes.

Towards a clinical application of freeze-dried squalene-based nanomedicines.

Squalene-adenosine (SQAd) nanoparticles (NPs) were found to display promising pharmacological activity similar to many other nanomedicines, but their long-term stability was still limited, and their preparation required specific know-how and material. These drawbacks represented important restrictions for their potential use in the clinic. Freeze-drying nanoparticles is commonly presented as a solution to allow colloidal stability, but this process needs to be adapted to each nanoformulation. Hence, we aimed at developing a specific protocol for freeze-drying SQAd NPs while preserving their structural features. NPs were lyophilised, resuspended and analysed by dynamic light scattering, atomic force microscopy and small-angle scattering. Among four different cryoprotectants, trehalose was found to be the most efficient in preserving NPs physico-chemical characteristics. Interestingly, we identified residual ethanol in NP suspensions as a key parameter which could severely affect the freeze-drying outcome, leading to NPs aggregation. Long-term stability was also assessed. No significant change in size distribution or zeta potential could be detected after three-month storage at 4 °C. Finally, freeze-dried NPs innocuity was checked in vitro on cultured hepatocytes and in vivo on mice. In conclusion, optimisation of freeze-drying conditions resulted in safe lyophilised SQAd NPs that can be easily stored, shipped and simply reconstituted into an injectable form.

Relevance of charges and polymer mechanical stiffness in the mechanism and kinetics of formation of liponanoparticles probed by the supported bilayer model approach.

In specific conditions, co-incubation of polymer nanoparticles and phospholipid vesicles leads to the formation of lipid bilayer coated nanoparticles usable as biocompatible drug delivery systems for co-encapsulation of two drugs. In this work, we focused on the preparation and characterization of liponanoparticles obtained by co-incubation of poly(d,l, lactic acid) (PDLLA) and neutral (POPC) or cationic (POPC/DOTAP) liposomes. The comparison of the behavior of the various studied vesicles co-incubated with nanoparticles highlighted the role of electrostatic interactions. Although the bilayer adsorbed at the surface of polymer nanoparticles was not visible by cryoTEM, zeta-potential measurements and fluorescence confocal microscopy showed evidence of the formation of hybrid nanoparticles in the presence of cationic vesicles. Using silicon dioxide and Langmuir-Schaefer transferred polymer layer-coated surfaces, a thorough analysis of the process of formation of a phospholipid bilayer at the surface of a PDLLA film was performed by combining QCM-D and AFM experiments, taking into account the nature and properties of the support, and the concentration and charge of the lipids. Contrarily to POPC vesicles, cationic ones formed a bilayer on the PDLLA layer in water, but their fast rupture on the soft material did not allow complete nanoparticle surface coverage. This work demonstrates the role of charges and polymer mechanical stiffness in the mechanism and kinetics of formation of PDLLA liponanoparticles in pure water.

The puzzling construction of the conidial outer layer of Aspergillus fumigatus.

If the mycelium of Aspergillus fumigatus is very short-lived in the laboratory, conidia can survive for years. This survival capacity and extreme resistance to environmental insults is a major biological characteristic of this fungal species. Moreover, conidia, which easily reach the host alveola, are the infective propagules. Earlier studies have shown the role of some molecules of the outer conidial layer in protecting the fungus against the host defense. The outer layer of the conidial cell wall, directly in contact with the host cells, consists of α-(1,3)-glucan, melanin, and proteinaceous rodlets. This study is focused on the global importance of this outer layer. Single and multiple mutants without one to three major components of the outer layer were constructed and studied. The results showed that the absence of the target molecules resulting from multiple gene deletions led to unexpected phenotypes without any logical additivity. Unexpected compensatory cell wall surface modifications were indeed observed, such as the synthesis of the mycelial virulence factor galactosaminogalactan, the increase in chitin and glycoprotein concentration or particular changes in permeability. However, sensitivity of the multiple mutants to killing by phagocytic host cells confirmed the major importance of melanin in protecting conidia.

Novel Perfluorinated Triblock Amphiphilic Copolymers for Lipid-Shelled Microbubble Stabilization.

Amphiphilic triblock (Atri) copolymers made of perfluorinated alkyl chain linked to hydrocarbon chain and methoxy-poly(ethylene glycol) of three different molecular weights were synthesized. In vitro evaluation demonstrated that these new compounds were noncytotoxic. Characterization and interaction of each triblock copolymer with a branched polyamine myristoyl lipid (2-{3[bis-(3-amino-propyl)-amino]-propylamino}- N-ditetradecyl carbamoyl methyl-acetamide, DMAPAP) were studied by the Langmuir film method and thermal analysis. The triblock copolymer/cationic lipids (1:10, w/w) were mixed with perfluorobutane gas to form microbubbles (MBs). The latter were characterized by optical microscopy to get the microbubble size and concentration by densimetry to determine the amount of encapsulated gas and by ultrasound to assess oscillation properties. Atri with the lowest and intermediate weights were shown to interact with the cationic lipid DMAPAP and stabilize the Langmuir film. In that case, monodisperse microbubbles ranging from 2.3 ± 0.1 to 2.8 ± 0.1 µm were obtained. The proportion of encapsulated gas within the MB shell increased up to 3 times after the incorporation of the copolymer with the lowest and intermediate weights. Moreover, the acoustic response of the microbubbles was maintained in the presence of the copolymers.

The bacterial cell envelope as delimiter of anti-infective bioavailability - An in vitro permeation model of the Gram-negative bacterial inner membrane.

Gram-negative bacteria possess a unique and complex cell envelope, composed of an inner and outer membrane separated by an intermediate cell wall-containing periplasm. This tripartite structure acts intrinsically as a significant biological barrier, often limiting the permeation of anti-infectives, and so preventing such drugs from reaching their target. Furthermore, identification of the specific permeation-limiting envelope component proves difficult in the case of many anti-infectives, due to the challenges associated with isolation of individual cell envelope structures in bacterial culture. The development of an in vitro permeation model of the Gram-negative inner membrane, prepared by repeated coating of physiologically-relevant phospholipids on Transwell® filter inserts, is therefore reported, as a first step in the development of an overall cell envelope model. Characterization and permeability investigations of model compounds as well as anti-infectives confirmed the suitability of the model for quantitative and kinetically-resolved permeability assessment, and additionally confirmed the importance of employing bacteria-specific base materials for more accurate mimicking of the inner membrane lipid composition - both advantages compared to the majority of existing in vitro approaches. Additional incorporation of further elements of the Gram-negative bacterial cell envelope could ultimately facilitate model application as a screening tool in anti-infective drug discovery or formulation development.

Assessment of the relevance of supported planar bilayers for modeling specific interactions between glycodendrimeric porphyrins and retinoblastoma cells.

Glycodendrimeric porphyrins seem promising photosensitizers usable in photodynamic therapy. Evidence of their ability to interact with an artificial supported bilayer membrane exhibiting a model sugar receptor has been previously shown. In the present work, the interaction of the glycodendrimeric porphyrins with retinoblastoma cells bearing the actual sugar receptor has been assessed by both classical cell cultures and an original approach using the quartz crystal microbalance (QCM-D). Our results showed that unlike cell cultures, QCM-D allowed analyzing the mechanism of interaction of the glycodendrimeric porphyrins with the sugar receptor. Not only was molecular recognition demonstrated, but our methodology also proved efficient to discriminate between the studied compounds, depending on the presence of carbohydrate, and the spacer length.

Tumor targeting in photodynamic therapy. From glycoconjugated photosensitizers to glycodendrimeric one. Concept, design and properties.

In this paper, we discuss the evolution over the last 15 years in the Curie Institute of the concept, the development of the design and some properties of glycoconjugated photosensitizers with the aim to optimize the tumor targeting in photodynamic therapy. By this research, we have shown that specific interactions between a mannose-lectin and trimannosylglycodendrimeric porphyrins contributed to a larger extent than non-specific ones to the overall interaction of a glycosylated tetraarylporphyrin with a membrane. The studies of in vitro photocytotoxicity showed the relevance of the global geometry of the photosensitizer, the number and position of the linked glycopyranosyl groups on the chromophore and their lipophilicity. The two best compounds appeared to be porphyrins bearing three α-glycosyl groups on para-position of meso-phenyl via a flexible linker. Compound bearing α-manosyl moieties was evaluated successfully in two in vivo xenografted animal models of human retinoblastoma and colorectal cancers. Conversely, the presence on the chromophore of three sugars via a glycodendrimeric moiety induced a potential cluster effect, but decreased the in vitro photoefficiency despite a good affinity for a mannose-lectin.

New strategy for targeting of photosensitizers. Synthesis of glycodendrimeric phenylporphyrins, incorporation into a liposome membrane and interaction with a specific lectin.

Two glycodendrimeric phenylporphyrins were synthesized and their interaction with phospholipids was studied at the air-water interface and in liposome bilayers; such liposomes bearing glycodendrimeric porphyrin could constitute an efficient carrier for drug targeting in photodynamic therapy.

Planar anchoring and surface melting in the smectic-A phase.

We study ultrathin films of 8CB in planar anchoring on a MoS2 inorganic substrate. We evidence an anchoring breakage for 60-nm-thick films, in favor of the homeotropic anchoring at the air interface. This allows one to determine the 8CB-MoS2 smectic anchoring energy. We then demonstrate for films thinner than 60 nm that, under the homeotropic bulk, an intermediate film remains in planar anchoring, associated with a melting of the smectic layers close to the substrate. Such a melting could be general for planar or tilted anchorings and we show that, for strong anchorings, the anchoring energy can be driven by the deformations of this intermediate nematic film.

The disassembly, reassembly and stability of CCMV protein capsids.

Efficient procedures are described for the disassembly of Cowpea Chlorotic Mottle Virus (CCMV) into its viral-RNA and capsid-protein components, the separation of the RNA and protein, and the reassembly of the purified protein into higher order nanoscale structures. These straightforward biochemical techniques result in high yield quantities of protein suitable for further biophysical studies (AFM, X-ray scattering, NMR, osmotic stress experiments, protein phase-diagram) and nanotechnology applications (protein enclosed nanoparticles, protein-lipid nanoemulsion droplets). Also discussed are solution conditions that affect the stability of the self-assembled protein structure and explicitly show that divalent cation is not required to obtain stable protein structures, while the presence of even small amounts of Ba(2+) have a significant impact on protein self-assembly. However, since high ionic strength solution conditions result in good yields of CCMV-like protein capsids, it is suggested that the highly charged cationic protein N-terminus could act as an electrostatic switch for protein self-assembly and therefore be modulated by ionic strength and salt type. It was also found that CaCl(2)/RNA precipitation methods do not yield sufficiently pure protein samples.

Failure of viral shells.

We report a combined theoretical and experimental study of the structural failure of viral shells under mechanical stress. We find that discontinuities in the force-indentation curve associated with failure should appear when the so-called Föppl-von Kármán (FvK) number exceeds a critical value. A nanoindentation study of a viral shell subject to a soft-mode instability, where the stiffness of the shell decreases with increasing pH, confirms the predicted onset of failure as a function of the FvK number.

Structure of smectic defect cores: x-ray study of 8CB liquid crystal ultrathin films.

We study the structure of very thin liquid crystal films frustrated by antagonistic anchorings in the smectic phase. In a cylindrical geometry, the structure is dominated by the defects for film thicknesses smaller than 150 nm and the detailed topology of the defects' cores can be revealed by x-ray diffraction. They appear to be split in half tube-shaped rotating grain boundaries (RGB). We determine the RGB spatial extension and evaluate its energy per unit length. Both are significantly larger than the ones usually proposed in the literature.