Interfacial behavior of Proteinase K enzyme at air-saline subphase.

This study investigates the interfacial behavior of the proteinase K enzyme at air-water interface. Adsorption of enzyme on the surface was induced using saline subphase. The surface packing and stability of the enzyme was investigated using of surface pressure-area (π-A) and surface potential-area (ΔV-A) isotherms. Proteinase K enzyme forms film at air-aqueous interface and demonstrates good stability as shown through compression-decompression cycle experiments. To characterize the surface assembly morphology of the interfacial enzymes UV-vis and fluorescence spectroscopic techniques were used. The data revealed that the enzyme Langmuir monolayer has good homogeneity with no evidence of aggregates during compression. The secondary structure of the enzyme at interface was determined to be α-helix using p-polarized infrared-reflection absorption spectroscopy. This was confirmed through Circular dichroism spectra of the enzyme Langmuir-Blodgett (LB) film which showed that the major conformation present were α-helices.

Conjugation of Carbon Dots with ß-Galactosidase Enzyme: Surface Chemistry and Use in Biosensing.

Nanoparticles have been conjugated to biological systems for numerous applications such as self-assembly, sensing, imaging, and therapy. Development of more reliable and robust biosensors that exhibit high response rate, increased detection limit, and enhanced useful lifetime is in high demand. We have developed a sensing platform by the conjugation of ß-galactosidase, a crucial enzyme, with lab-synthesized gel-like carbon dots (CDs) which have high luminescence, photostability, and easy surface functionalization. We found that the conjugated enzyme exhibited higher stability towards temperature and pH changes in comparison to the native enzyme. This enriched property of the enzyme was distinctly used to develop a stable, reliable, robust biosensor. The detection limit of the biosensor was found to be 2.9 × 10-4 M, whereas its sensitivity was 0.81 µA·mmol-1·cm-2. Further, we used the Langmuir monolayer technique to understand the surface properties of the conjugated enzyme. It was found that the conjugate was highly stable at the air/subphase interface which additionally reinforces the suitability of the use of the conjugated enzyme for the biosensing applications.

Surface Chemistry and Spectroscopic Study of a Cholera Toxin B Langmuir Monolayer.

In this article, we explored the surface chemistry properties of a cholera toxin B (CTB) monolayer at the air-subphase interface and investigated the change in interfacial properties through in situ spectroscopy. The study showed that the impact of the blue shift was negligible, suggesting that the CTB molecules were minimally affected by the subphase molecules. The stability of the CTB monolayer was studied by maintaining the constant surface pressure for a long time and also by using the compression-decompression cycle experiments. The high stability of the Langmuir monolayer of CTB clearly showed that the driving force of CTB going to the amphiphilic membrane was its amphiphilic nature. In addition, no major change was detected in the various in situ spectroscopy results (such as UV-vis, fluorescence, and IR ER) of the CTB Langmuir monolayer with the increase in surface pressure. This indicates that no aggregation occurs in the Langmuir monolayer of CTB.

ß-Galactosidase Langmuir Monolayer at Air/X-gal Subphase Interface.

This article investigates the surface chemistry properties of the ß-galactosidase monolayer at the air-subphase interface at the vicinity of its substrate, X-gal. We have demonstrated that the ß-galactosidase in the monolayer form remained active and performed hydrolysis of the X-gal in the subphase. We investigated the ß-galactosidase Langmuir monolayer in absence and presence of X-gal in the subphase of varying concentration of X-gal with the sodium chloride solution. It was found that the limiting molecular area as well as the collapse surface pressure kept on decreasing with the increasing concentration of X-gal. In accordance to the data obtained from the isotherm it was also found that ß-galactosidase forms a stable monolayer that does not aggregate at the air-subphase interface. The stability of the monolayer at the air-subphase interface was studied by using compression-decompression cycles with and without X-gal at varying concentration and different surface pressures. The infrared reflection-absorption spectroscopy (IRRAS) and Brewster angle microscopy (BAM) of ß-galactosidase Langmuir monolayer was also investigated for pure and mixed ß-galactosidase at the air-subphase.

Surface chemistry and spectroscopy of the ß-galactosidase Langmuir monolayer.

The changes of interfacial properties of ß-galactosidase introduced into different pH environments are investigated through surface chemistry and in situ spectroscopy. Conditions for an optimal Langmuir monolayer formation were firstly obtained by varying the subphase salt concentration and the surface-pressure area isotherm was used to extrapolate the limiting molecular area of the enzyme monolayer to be around 42,000 Å(2) molecule(-1). Surface pressure stability measurements held at 20 mN/m for 90 min along with compression-decompression cycles revealed no aggregate formation at the air-water interface. Consistent with the data obtained from the isotherm, in situ UV-Vis and fluorescence spectroscopy shows a steep rise in absorbance and photoluminescence intensity correlating to with a switch from a liquid-expanded to a liquid-condensed phase. A decrease in subphase pH increased the electrostatic repulsion as the enzyme was protonated, leading to an expanded monolayer. Infrared absorption-reflection spectroscopy demonstrates that the enzyme adopts mainly ß-sheet conformation at the air-water interface before and during the compression.

Strong and selective adsorption of lysozyme on graphene oxide.

Biosensing methods and devices using graphene oxide (GO) have recently been explored for detection and quantification of specific biomolecules from body fluid samples, such as saliva, milk, urine, and serum. For a practical diagnostics application, any sensing system must show an absence of nonselective detection of abundant proteins in the fluid matrix. Because lysozyme is an abundant protein in these body fluids (e.g., around 21.4 and 7 µg/mL of lysozyme is found in human milk and saliva from healthy individuals, and more than 15 or even 100 µg/mL in patients suffering from leukemia, renal disease, and sarcoidosis), it may interfere with detections and quantification if it has strong interaction with GO. Therefore, one fundamental question that needs to be addressed before any development of GO based diagnostics method is how GO interacts with lysozyme. In this study, GO has demonstrated a strong interaction with lysozyme. This interaction is so strong that we are able to subsequently eliminate and separate lysozyme from aqueous solution onto the surface of GO. Furthermore, the strong electrostatic interaction also renders the selective adsorption of lysozyme on GO from a mixture of binary and ternary proteins. This selectivity is confirmed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), fluorescence spectroscopy, and UV-vis absorption spectroscopy.

Human insulin fibril-assisted synthesis of fluorescent gold nanoclusters in alkaline media under physiological temperature.

Fluorescent insulin fibrils gold nanoclusters (Au NCs) have been synthesized through the reduction of gold by human insulin in fibrillated form. Likewise, nanocluster formation has been regulated by insulin, working as a protein-based template. Environment- and surface-controlled experiments have shown the optimized synthesis conditions is comprised of a pure aqueous alkaline solvent for insulin under constant heat at physiological temperature (37°C) prior to addition of the Au precursor (HAuCl4), followed by subsequent heating (37°C) and vigorous stirring after the addition of HAuCl4 until the completion of the synthetic approach. Microscopy experiments detected the presence of primordial fibril structures in samples of heated human insulin in the alkaline medium prior to addition of HAuCl4, while encountering more developed insulin fibrils in the terminal production of Au NCs. This investigation provides insight to the development of a novel synthesis of Au NCs in the alkaline medium, while providing a graphical description of the environmental and surface-dependent effects that were presented in the synthesis of human insulin nanoclusters. The study provides pertinent information for future synthetic procedures, as the protein state of several protein-nanoparticle systems may reflect on the results that were obtained herein.

Surface chemistry and spectroscopy of human insulin Langmuir monolayer.

The human insulin (HI) protein was examined to elucidate its structure at the air-water interface. Optimal experimental conditions were determined to prepare a homogeneous and stable human insulin (HI) Langmuir monolayer. HI insulin Langmuir monolayer can be used to study interactions of HI with a membrane as Langmuir monolayers are used as an in vitro model of biological membranes. Surface pressure and surface potential-area isotherms were used to characterize the HI Langmuir monolayer. The compression-decompression cycles and stability measurements showed a homogeneous and stable monolayer at the air-water interface. However, higher surface pressures resulted in a higher decrease in area and less stability. In situ UV-vis and fluorescence spectroscopy were used to verify the homogeneity of the HI monolayer and to identify the chromophore residues in the HI. Domain formation was examined through epifluorescence and Brewster angle microscopies. The conformation of HI was examined by circular dichroism (CD) and Fourier transform infrared spectroscopy (FTIR) in the aqueous phase and at the air-water interface by infrared reflection absorption spectroscopy (IRRAS). HI was found to exist as a monomer in 2-D.

Human islet amyloid polypeptide at the air-aqueous interface: a Langmuir monolayer approach.

Human islet amyloid polypeptide (hIAPP) is the source of the major component of the amyloid deposits found in the islets of Langerhans of around 95 per cent type 2 diabetic patients. The formation of aggregates and mature fibrils is thought to be responsible for the dysfunction and death of the insulin-producing pancreatic ß-cells. Investigation on the conformation, orientation and self-assembly of the hIAPP at time zero could be beneficial for our understanding of its stability and aggregation process. To obtain these insights, the hIAPP at time zero was studied at the air-aqueous interface using the Langmuir monolayer technique. The properties of the hIAPP Langmuir monolayer at the air-aqueous interface on a NaCl subphase with pH 2.0, 5.6 and 9.0 were examined by surface pressure- and potential-area isotherms, UV-Vis absorption, fluorescence spectroscopy and Brewster angle microscopy. The conformational and orientational changes of the hIAPP Langmuir monolayer under different surface pressures were characterized by p-polarized infrared-reflection absorption spectroscopy, and the results did not show any prominent changes of conformation or orientation. The predominant secondary structure of the hIAPP at the air-aqueous interface was α-helix conformation, with a parallel orientation to the interface during compression. These results showed that the hIAPP Langmuir monolayer at the air-aqueous interface was stable, and no aggregate or domain of the hIAPP at the air-aqueous interface was observed during the time of experiments.

Study of the aggregation of human insulin Langmuir monolayer.

The human insulin (HI) Langmuir monolayer at the air-water interface was systematically investigated in the presence and absence of Zn(II) ions in the subphase. HI samples were dissolved in acidic (pH 2) and basic (pH 9) aqueous solutions and then spread at the air-water interface. Spectroscopic data of aqueous solutions of HI show a difference in HI conformation at different pH values. Moreover, the dynamics of the insulin protein showed a dependence on the concentration of Zn(II) ions. In the absence of Zn(II) ions in the subphase, the acidic and basic solutions showed similar behavior at the air-water interface. In the presence of Zn(II) ions in the subphase, the surface pressure-area and surface potential-area isotherms suggest that HI may aggregate at the air-water interface. It was observed that increasing the concentration of Zn(II) ions in the acidic (pH 2) aqueous solution of HI led to an increase of the area at a specific surface pressure. It was also seen that the conformation of HI in the basic (pH 9) medium had a reverse effect (decrease in the surface area) with the increase of the concentration of Zn(II) ions in solution. From the compression-decompression cycles we can conclude that the aggregated HI film at air-water interface is not stable and tends to restore a monolayer of monomers. These results were confirmed from UV-vis and fluorescence spectroscopy analysis. Infrared reflection-absorption and circular dichroism spectroscopy techniques were used to determine the secondary structure and orientation changes of HI by zinc ions. Generally, the aggregation process leads to a conformation change from α-helix to ß-strand and ß-turn, and at the air-water interface, the aggregation process was likewise seen to induce specific orientations for HI in the acidic and basic media. A proposed surface orientation model is presented here as an explanation to the experimental data, shedding light for further research on the behavior of insulin as a Langmuir monolayer.

Interaction of the CdSe quantum dots with plant cell walls.

There is an increasing application of quantum dots (QDs) in plant science, as markers for the cells or their cell walls (CWs). In a plant cell the CW is a first target place for external agents. We studied interaction of CdSe QDs with CWs isolated from a conifer -Picea omorika (Panc) Purkyne branch. Binding of CdSe QDs was followed by using fluorescence microscopy, fluorescence and FT-IR spectroscopy. The aim of the study was to see whether the QDs induce structural changes in the CW, as well as to find out which kind of interactions between QDs and CWs occur and to which particular constituent polymers QDs preferably bind. The isolated CW is an appropriate object for study of the interactions with nanoparticles. The results show that in the CW, CdSe predominantly binds to cellulose, via OH groups and to lignin, via the conjugated CC/C-C chains. The differences in interaction of wet and dry CWs with QDs/chloroform were also studied. In the reaction of the dry CW sample with QDs/chloroform, hydrophobic interactions are dominant. When water was added after QDs/chloroform, hydrophilic interactions enable a partial reconstruction of the CC chains. The results have an implication on the use of the QDs in plant bio-imaging.

A multiplexed immunoassay system based upon reciprocating centrifugal microfluidics.

A novel, centrifugal disk-based micro-total analysis system (µTAS) for low cost and high throughput semi-automated immunoassay processing was developed. A key innovation in the disposable immunoassay disk design is in a fluidic structure that enables very efficient micro-mixing based on a reciprocating mechanism in which centrifugal acceleration acting upon a liquid element first generates and stores pneumatic energy that is then released by a reduction of the centrifugal acceleration, resulting in a reversal of direction of flow of the liquid. Through an alternating sequence of high and low centrifugal acceleration, the system reciprocates the flow of liquid within the disk to maximize incubation/hybridization efficiency between antibodies and antigen macromolecules during the incubation/hybridization stage of the assay. The described reciprocating mechanism results in a reduction in processing time and reagent consumption by one order of magnitude.

Surface chemistry of lipid raft and amyloid Aß (1-40) Langmuir monolayer.

Lipid rafts being rich in cholesterol and sphingolipids are considered to provide ordered lipid environment in the neuronal membranes, where it is hypothesized that the cleavage of amyloid precursor protein (APP) to Aß (1-40) and Aß (1-42) takes place. It is highly likely that the interaction of lipid raft components like cholesterol, sphingomylein or GM1 leads to nucleation of Aß and results in aggregation or accumulation of amyloid plaques. One has investigated surface pressure-area isotherms of the lipid raft and Aß (1-40) Langmuir monolayer. The compression-decompression cycles and the stability of the lipid raft Langmuir monolayer are crucial parameters for the investigation of interaction of Aß (1-40) with the lipid raft Langmuir monolayer. It was revealed that GM1 provides instability to the lipid raft Langmuir monolayer. Adsorption of Aß (1-40) onto the lipid raft Langmuir monolayer containing neutral (POPC) or negatively charged phospholipid (DPPG) was examined. The adsorption isotherms revealed that the concentration of cholesterol was important for adsorption of Aß (1-40) onto the lipid raft Langmuir monolayer containing POPC whereas for the lipid raft Langmuir monolayer containing DPPG:cholesterol or GM1 did not play any role. In situ UV-vis absorption spectroscopy supported the interpretation of results for the adsorption isotherms.

Conjugated Quantum Dots Inhibit the Amyloid ß (1-42) Fibrillation Process.

Nanoparticles have enormous potential in diagnostic and therapeutic studies. We have demonstrated that the amyloid beta mixed with and conjugated to dihydrolipoic acid- (DHLA) capped CdSe/ZnS quantum dots (QDs) of size approximately 2.5 nm can be used to reduce the fibrillation process. Transmission electron microscopy (TEM) and atomic force microscopy (AFM) were used as tools for analysis of fibrillation. There is a significant change in morphology of fibrils when amyloid ß (1-42) (Aß (1-42)) is mixed or conjugated to the QDs. The length and the width of the fibrils vary under modified conditions. Thioflavin T (ThT) fluorescence supports the decrease in fibril formation in presence of DHLA-capped QDs.

Human cardiac troponin I: a Langmuir monolayer study.

Human cardiac troponin I (cTnI) is the preferred biomarker in the assessment of myocardial infarction. It is known to interact with troponin C and T to form a trimeric complex. Whereas small amounts are found in the cytoplasm, most of cTnI is in the form of a complex with actin located in myofilaments. To understand these interactions of cTnI better, we first investigated the surface chemistry of cTnI as a Langmuir monolayer spread at the air-water interface. We investigated the optimal conditions for obtaining a stable Langmuir monolayer in terms of changing the ionic strength of the subphase using different concentrations of potassium chloride. Monolayer stability was investigated by compressing the cTnI monolayer to a specific surface pressure and keeping the surface pressure constant while measuring the decrease in the molecular area as a function of time. Aggregation and/or domain formation was investigated by using compression-decompression cycles, in situ UV-vis spectroscopy, Brewster angle microscopy (BAM), and epifluorescence microscopy. To ensure that the secondary structure is maintained, we used infrared reflection-absorption spectroscopy (IRRAS) directly at the air-subphase interface. It was found that cTnI forms a very stable monolayer (after more that 5000 s) that does not aggregate at the air-subphase interface. The cTnI molecules maintain their secondary structure and, on the basis of the low reflectivity observed using BAM measurements and the low reflection-absorption intensities measured with IRRAS spectroscopy, lie flat on the subphase with the alpha-helices parallel to the air-subphase interface.

Surface chemistry of Alzheimer's disease: a Langmuir monolayer approach.

Amyloid beta (1-40) and (1-42) peptides are the major constituents of hallmark senile plaques found in Alzheimer's disease (AD) patients. Study of aggregation of Abeta (1-40) and (1-42) peptides and the truncated Abeta fragments could lead towards the mechanism of AD. Langmuir monolayer approach is one of the excellent methods to investigate the mechanism and origin of AD. Particularly, to study the steps involved in the formation and assembly of beta-sheet structures leading to formation of amyloid fibrils. Surface pressure- and surface potential-area isotherms provide information regarding the nature of short-range and long-range interactions between the molecules especially the lipids and the Abeta peptides. Spectroscopic methods like IRRAS, PM-IRRAS, FTIR-ATR, and GIXD at the air-water interface provide insight into the structural characterization, and orientation of the molecules in the Langmuir monolayer.

Reciprocating flow-based centrifugal microfluidics mixer.

Proper mixing of reagents is of paramount importance for an efficient chemical reaction. While on a large scale there are many good solutions for quantitative mixing of reagents, as of today, efficient and inexpensive fluid mixing in the nanoliter and microliter volume range is still a challenge. Complete, i.e., quantitative mixing is of special importance in any small-scale analytical application because the scarcity of analytes and the low volume of the reagents demand efficient utilization of all available reaction components. In this paper we demonstrate the design and fabrication of a novel centrifugal force-based unit for fast mixing of fluids in the nanoliter to microliter volume range. The device consists of a number of chambers (including two loading chambers, one pressure chamber, and one mixing chamber) that are connected through a network of microchannels, and is made by bonding a slab of polydimethylsiloxane (PDMS) to a glass slide. The PDMS slab was cast using a SU-8 master mold fabricated by a two-level photolithography process. This microfluidic mixer exploits centrifugal force and pneumatic pressure to reciprocate the flow of fluid samples in order to minimize the amount of sample and the time of mixing. The process of mixing was monitored by utilizing the planar laser induced fluorescence (PLIF) technique. A time series of high resolution images of the mixing chamber were analyzed for the spatial distribution of light intensities as the two fluids (suspension of red fluorescent particles and water) mixed. Histograms of the fluorescent emissions within the mixing chamber during different stages of the mixing process were created to quantify the level of mixing of the mixing fluids. The results suggest that quantitative mixing was achieved in less than 3 min. This device can be employed as a stand alone mixing unit or may be integrated into a disk-based microfluidic system where, in addition to mixing, several other sample preparation steps may be included.

Immune blood biomarkers of Alzheimer disease patients.

Alzheimer disease (AD) patients have an impairment of anti-amyloid-beta (Abeta) innate immunity and a defect in immune gene transcription [Fiala, M., Liu, P.T., Espinosa-Jeffrey, A., Rosenthal, M.J., Bernard, G., Ringman, J.M., Sayre, J., Zhang, L., Zaghi, J., Dejbakhsh, S., Chiang, B., Hui, J., Mahanian, M., Baghaee, A., Hong, P., Cashman, J., 2007b. Innate immunity and transcription of MGAT-III and Toll-like receptors in Alzheimer's disease patients are improved by bisdemethoxycurcumin. Proc. Natl. Acad. Sci. U. S. A. 104, 12849-12854]. Early diagnosis is a cornerstone of preventive approaches to AD. Phospho-tau and Abeta CSF levels are useful markers of neurodegeneration but not of a process leading to neurodegeneration. To detect an early biomarker of AD, we developed a flow cytometric test of Abeta phagocytosis, which was 94% positive (<400 MFI units) in AD patients (mean age+/-SEM 77+2.2 years; mean score+/-SEM 198.6+/-25.5 MFI units) and 60% positive in MCI patients (77+/-5.6 years; 301+/-106 MFI units). Control subjects, active senior university professors, were 100% negative (74.2+/-4.2 years; 1348+/-174 MFI units). The test had a low specificity in older caregivers and older amyotrophic lateral sclerosis (ALS) patients. We also tested transcriptional regulation of the genes MGAT-III and Toll-like receptor-3 in macrophages. Macrophages of "Type I" patients (a majority of patients) showed gene down regulation at baseline and up regulation by curcuminoids; macrophages of "Type II" patients showed opposite responses. The results of flow cytometric testing suggest that normal Abeta phagocytosis is associated with healthy cognition and lesser risk of AD. The significance of abnormal results in aged persons should be investigated by prospective studies to determine the risk of AD.

Antibody-gold quantum dot-PAMAM dendrimer complex as an immunoglobulin immunoassay.

Gold quantum dots (AuQDs) were synthesized and electrostatically conjugated to goat-derived anti-human IgG for the purpose of detecting human IgG in solution over a broad range of concentrations. The system is able to detect human IgG by linear fluorescence quenching over a micromolar to nanomolar concentration range. We have demonstrated the specificity and a wide dynamic range of the proposed immunoassay. The quenching is a result of competitive surface quenching of the AuQDs. Characterization, details of the immunoassay, and the quenching mechanism, are discussed.

Infrared reflection-absorption spectroscopy and polarization-modulated infrared reflection-absorption spectroscopy studies of the aequorin langmuir monolayer.

The Langmuir monolayer of aequorin and apoaequorin was studied by infrared reflection-absorption spectroscopy (IRRAS) and polarization-modulated IRRAS techniques. The alpha-helices in the aequorin Langmuir monolayer were parallel to the air-water interface at zero surface pressure. When the surface pressure increased to 15 mN.(m-1), the alpha-helices became tilted and the turns became parallel to the air-water interface. As for apoaequorin, the alpha-helices were also parallel to the air-water interface at 0 mN.m(-1). However, the alpha-helix became tilted and the turns became parallel to the air-water interface quickly at 5 mN.m(-1). With further compression of the apoaequorin Langmuir monolayer, the orientation remained the same. The different behaviors of aequorin and apoaequorin at the air-water interface were explained by the fact that aequorin formed dimers at the air-water interface but apoaequorin was a monomer. It is more difficult for a dimer to be tilted by the compression of the Langmuir monolayer.