Preparative scale Achmatowicz and aza-Achmatowicz rearrangements catalyzed by Agrocybe aegerita unspecific peroxygenase.

The unspecific peroxygenase (UPO) from Agrocybe aegerita (rAaeUPO-PaDa-I-H) is an effective and practical biocatalyst for the oxidative expansion of furfuryl alcohols/amines on a preparative scale, using the Achmatowicz and aza-Achmatowicz reaction. The high activity and stability of the enzyme, which can be produced on a large scale as an air-stable lyophilised powder, renders it a versatile and scalable biocatalyst for the preparation of synthetically valuable 6-hydroxypyranones and dihydropiperidinones. In several cases, the biotransformation out-performed the analogous chemo-catalysed process, and operates under milder and greener reaction conditions.

Unspecific Peroxygenase (UPO) can be Tuned for Oxygenation or Halogenation Activity by Controlling the Reaction pH.

Unspecific Peroxygenases (UPOs) are increasingly significant enzymes for selective oxygenations as they are stable, highly active and catalyze their reactions at the expense of only hydrogen peroxide as the oxidant. Their structural similarity to chloroperoxidase (CPO) means that UPOs can also catalyze halogenation reactions based upon the generation of hypohalous acids from halide and H2O2. Here we show that the halogenation and oxygenation modes of a UPO can be stimulated at different pH values. Using simple aromatic compounds such as thymol, we show that, at a pH of 3.0 and 6.0, either brominated or oxygenated products respectively are produced. Preparative 100 mg scale transformations of substrates were performed with 60-72 % isolated yields of brominated products obtained. A one-pot bromination-oxygenation cascade reaction on 4-ethylanisole, in which the pH was adjusted from 3.0 to 6.0 at the halfway stage, yielded sequentially brominated and oxygenated products 1-(3-bromo-4-methoxyphenyl)ethyl alcohol and 3-bromo-4-methoxy acetophenone with 82 % combined conversion. These results identify UPOs as an unusual example of a biocatalyst that is tunable for entirely different chemical reactions, dependent upon the reaction conditions.

Comparing the Catalytic and Structural Characteristics of a 'Short' Unspecific Peroxygenase (UPO) Expressed in Pichia†pastoris and Escherichia†coli.

Unspecific peroxygenases (UPOs) have emerged as valuable tools for the oxygenation of non-activated carbon atoms, as they exhibit high turnovers, good stability and depend only on hydrogen peroxide as the external oxidant for activity. However, the isolation of UPOs from their natural fungal sources remains a barrier to wider application. We have cloned the gene encoding an 'artificial' peroxygenase (artUPO), close in sequence to the 'short' UPO from Marasmius rotula (MroUPO), and expressed it in both the yeast Pichia pastoris and E. coli to compare the catalytic and structural characteristics of the enzymes produced in each system. Catalytic efficiency for the UPO substrate 5-nitro-1,3-benzodioxole (NBD) was largely the same for both enzymes, and the structures also revealed few differences apart from the expected glycosylation of the yeast enzyme. However, the glycosylated enzyme displayed greater stability, as determined by nano differential scanning fluorimetry (nano-DSF) measurements. Interestingly, while artUPO hydroxylated ethylbenzene derivatives to give the (R)-alcohols, also given by a variant of the 'long' UPO from Agrocybe aegerita (AaeUPO), it gave the opposite (S)-series of sulfoxide products from a range of sulfide substrates, broadening the scope for application of the enzymes. The structures of artUPO reveal substantial differences to that of AaeUPO, and provide a platform for investigating the distinctive activity of this and related'short' UPOs.

Preparative-Scale Biocatalytic Oxygenation of N-Heterocycles with a Lyophilized Peroxygenase Catalyst.

A lyophilized preparation of an unspecific peroxygenase variant from Agrocybe aegerita (rAaeUPO-PaDa-I-H) is a highly effective catalyst for the oxygenation of a diverse range of N-heterocyclic compounds. Scalable biocatalytic oxygenations (27 preparative examples, ca. 100 mg scale) have been developed across a wide range of substrates, including alkyl pyridines, bicyclic N-heterocycles and indoles. H2 O2 is the only stoichiometric oxidant needed, without auxiliary electron transport proteins, which is key to the practicality of the method. Reaction outcomes can be altered depending on whether hydrogen peroxide was delivered by syringe pump or through in situ generation using an alcohol oxidase from Pichia pastoris (PpAOX) and methanol as a co-substrate. Good synthetic yields (up to 84 %), regioselectivity and enantioselectivity (up to 99 % ee) were observed in some cases, highlighting the promise of UPOs as practical, versatile and scalable oxygenation biocatalysts.

Chromoselective Photocatalysis Enables Stereocomplementary Biocatalytic Pathways*.

Controlling the selectivity of a chemical reaction with external stimuli is common in thermal processes, but rare in visible-light photocatalysis. Here we show that the redox potential of a carbon nitride photocatalyst (CN-OA-m) can be tuned by changing the irradiation wavelength to generate electron holes with different oxidation potentials. This tuning was the key to realizing photo-chemo-enzymatic cascades that give either the (S)- or the (R)-enantiomer of phenylethanol. In combination with an unspecific peroxygenase from Agrocybe aegerita, green light irradiation of CN-OA-m led to the enantioselective hydroxylation of ethylbenzene to (R)-1-phenylethanol (99 % ee). In contrast, blue light irradiation triggered the photocatalytic oxidation of ethylbenzene to acetophenone, which in turn was enantioselectively reduced with an alcohol dehydrogenase from Rhodococcus ruber to form (S)-1-phenylethanol (93 % ee).

Chromoselective Photocatalysis Enables Stereocomplementary Biocatalytic Pathways.

Controlling the selectivity of a chemical reaction with external stimuli is common in thermal processes, but rare in visible-light photocatalysis. Here we show that the redox potential of a carbon nitride photocatalyst (CN-OA-m) can be tuned by changing the irradiation wavelength to generate electron holes with different oxidation potentials. This tuning was the key to realizing photo-chemo-enzymatic cascades that give either the (S)- or the (R)-enantiomer of phenylethanol. In combination with an unspecific peroxygenase from Agrocybe aegerita, green light irradiation of CN-OA-m led to the enantioselective hydroxylation of ethylbenzene to (R)-1-phenylethanol (99 % ee). In contrast, blue light irradiation triggered the photocatalytic oxidation of ethylbenzene to acetophenone, which in turn was enantioselectively reduced with an alcohol dehydrogenase from Rhodococcus ruber to form (S)-1-phenylethanol (93 % ee).

Structures of the Apo and FAD-bound forms of 2-hydroxybiphenyl 3-monooxygenase (HbpA) locate activity hotspots identified by using directed evolution.

The FAD-dependent monooxygenase HbpA from Pseudomonas azelaica HBP1 catalyses the hydroxylation of 2-hydroxybiphenyl (2HBP) to 2,3-dihydroxybiphenyl (23DHBP). HbpA has been used extensively as a model for studying flavoprotein hydroxylases under process conditions, and has also been subjected to directed-evolution experiments that altered its catalytic properties. The structure of HbpA has been determined in its apo and FAD-complex forms to resolutions of 2.76 and 2.03 Å, respectively. Comparisons of the HbpA structure with those of homologues, in conjunction with a model of the reaction product in the active site, reveal His48 as the most likely acid/base residue to be involved in the hydroxylation mechanism. Mutation of His48 to Ala resulted in an inactive enzyme. The structures of HbpA also provide evidence that mutants achieved by directed evolution that altered activity are comparatively remote from the substrate-binding site.

Photoisomerizable and thermoresponsive N-isopropylacrylamide-surfmer copolymer hydrogels prepared upon electrostatic self-assembly of an azobenzene bolaamphiphile.

Photoreactive and thermoresponsive N-isopropylacrylamide (NIPAM)-surfmer copolymer hydrogels containing 4,4'-di(6-sulfato-hexyloxy)azobenzene (DSHA) dianions are described. The functional hydrogels are obtained in a two steps. First a micellar aqueous solution of (11-(acryloyloxy)undecyl)trimethylammonium bromide (AUTMAB) and NIPAM is exposed to (60) Co-gamma irradiation, and a thermoresponsive copolymer gel is obtained. Second, DSHA is included by shrinking the gel at 50 °C and subsequent reswelling in an aqueous solution of DSHA disodium salt at 20 °C. Reswelling is accompanied by electrostatic adsorption of DSHA dianions at the positively charged AUTMAB headgroups replacing the bromide ions. Gels containing trans-DSHA are transparent yellow at room temperature (λmax = 370 nm), while gels containing cis-rich DSHA are orange (λmax = 460 and 330 nm). Energy dispersive X-ray measurements indicate that 41% of the bromide ions are exchanged if trans-DSHA is used for adsorption, and only 7.5% if cis-DSHA is used. The incorporation of DSHA lowers the lower critical solution temperature (LCST) from 34 to 32 °C. Below the LCST, DSHA can be switched from the trans- to the cis-rich state and vice versa upon irradiation with UV (λ = 366 nm) or visible light (λ ≥ 450 nm). Above the LCST no photoreaction takes place.