Integration of 3D-printed cerebral cortical tissue into an ex vivo lesioned brain slice.

Engineering human tissue with diverse cell types and architectures remains challenging. The cerebral cortex, which has a layered cellular architecture composed of layer-specific neurons organised into vertical columns, delivers higher cognition through intricately wired neural circuits. However, current tissue engineering approaches cannot produce such structures. Here, we use a droplet printing technique to fabricate tissues comprising simplified cerebral cortical columns. Human induced pluripotent stem cells are differentiated into upper- and deep-layer neural progenitors, which are then printed to form cerebral cortical tissues with a two-layer organization. The tissues show layer-specific biomarker expression and develop a structurally integrated network of processes. Implantation of the printed cortical tissues into ex vivo mouse brain explants results in substantial structural implant-host integration across the tissue boundaries as demonstrated by the projection of processes and the migration of neurons, and leads to the appearance of correlated Ca2+ oscillations across the interface. The presented approach might be used for the evaluation of drugs and nutrients that promote tissue integration. Importantly, our methodology offers a technical reservoir for future personalized implantation treatments that use 3D tissues derived from a patient's own induced pluripotent stem cells.

A microscale soft ionic power source modulates neuronal network activity.

Bio-integrated devices need power sources to operate1,2. Despite widely used technologies that can provide power to large-scale targets, such as wired energy supplies from batteries or wireless energy transduction3, a need to efficiently stimulate cells and tissues on the microscale is still pressing. The ideal miniaturized power source should be biocompatible, mechanically flexible and able to generate an ionic current for biological stimulation, instead of using electron flow as in conventional electronic devices4-6. One approach is to use soft power sources inspired by the electrical eel7,8; however, power sources that combine the required capabilities have not yet been produced, because it is challenging to obtain miniaturized units that both conserve contained energy before usage and are easily triggered to produce an energy output. Here we develop a miniaturized soft power source by depositing lipid-supported networks of nanolitre hydrogel droplets that use internal ion gradients to generate energy. Compared to the original eel-inspired design7, our approach can shrink the volume of a power unit by more than 105-fold and it can store energy for longer than 24 h, enabling operation on-demand with a 680-fold greater power density of about 1,300 W m-3. Our droplet device can serve as a biocompatible and biological ionic current source to modulate neuronal network activity in three-dimensional neural microtissues and in ex vivo mouse brain slices. Ultimately, our soft microscale ionotronic device might be integrated into living organisms.

Single-Molecule Kinetics of Growth and Degradation of Cell-Penetrating Poly(disulfide)s.

The delivery of therapeutic agents into target cells is a challenging task. Cell penetration and intracellular targeting were recently addressed with biodegradable cell-penetrating poly(disulfide)s (CPDs). Cellular localization is determined by the length of these polymers, emphasizing the significance of initial chain length and the kinetics of intracellular depolymerization for targeted delivery. In the present study, the kinetics of CPD polymer growth and degradation were monitored in a single-molecule nanoreactor. The chain lengths achievable under synthetic conditions with high concentrations of dithiolanes were then predicted by using the rate constants. For example, CPDs comprising 40 units are generated in 1 s at pH 7.4 and 0.3 s at pH 8.4 at dithiolane concentrations of 200 mM. The rate constants for degradation suggest that the main depolymerization pathway in the cell is by monomer removal by self-cyclization, rather than by intrachain cleavage by endogenous thiols.

High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing.

Bioprinting is an emerging technique for the fabrication of living tissues that allows cells to be arranged in predetermined three-dimensional (3D) architectures. However, to date, there are limited examples of bioprinted constructs containing multiple cell types patterned at high-resolution. Here we present a low-cost process that employs 3D printing of aqueous droplets containing mammalian cells to produce robust, patterned constructs in oil, which were reproducibly transferred to culture medium. Human embryonic kidney (HEK) cells and ovine mesenchymal stem cells (oMSCs) were printed at tissue-relevant densities (107 cells mL-1) and a high droplet resolution of 1 nL. High-resolution 3D geometries were printed with features of ≤200 µm; these included an arborised cell junction, a diagonal-plane junction and an osteochondral interface. The printed cells showed high viability (90% on average) and HEK cells within the printed structures were shown to proliferate under culture conditions. Significantly, a five-week tissue engineering study demonstrated that printed oMSCs could be differentiated down the chondrogenic lineage to generate cartilage-like structures containing type II collagen.

Gel Microrods for 3D Tissue Printing.

Large scale 3D ordering of anisotropic gel objects, such as gel microrods, both rigid and soft, is in demand for the engineering of replica tissues but has not yet been achieved. Here, monodisperse gel microrods of gelatin methacrylate (GelMa) or Matrigel are generated by a droplet-based microfluidics tubing system. The microrods are 50-300 µm wide and 1-3 mm long; the GelMa versions are produced at up to 50 s-1 while the more fragile Matrigel versions are produced at up to 10 s-1 followed by 1 h of gelation. Upon ejection from the tubing, the rods can be printed into robust 3D structures of centimeter dimensions in which the rods are organized into patterns, including various parallel arrangements and tubular structures. Further, mammalian cells contained within the microrods remain viable, and can proliferate and migrate. As well as homogeneous microrods, Janus and ternary rods can be prepared. Gel microrods will be useful for the production of printed tissues, which mimic intricate architectures found in Nature that cannot presently be attained.

Continuous observation of the stochastic motion of an individual small-molecule walker.

Motion--whether it the ability to change shape, rotate or translate--is an important potential asset for functional nanostructures. For translational motion, a variety of DNA-based and small-molecule walkers have been created, but observing the translational motion of individual molecules in real time remains a significant challenge. Here, we show that the movement of a small-molecule walker along a five-foothold track can be monitored continuously within a protein nanoreactor. The walker is an organoarsenic(III) molecule with exchangeable thiol ligands, and the track a line of cysteine residues 6 Šapart within an α-haemolysin protein pore that acts as the nanoreactor. Changes in the flow of ionic current through the pore reflect the individual steps of a single walker, which require the making and breaking of As-S bonds, and occur in aqueous solution at neutral pH and room temperature. The walker moves considerably faster (∼0.7 s per step) than previous walkers based on covalent chemistry and is weakly processive (6 ± 1 steps per outing). It shows weak net directional movement, which can be described by a thermodynamic sink arising from the different environments of the cysteines that constitute the track.

Detection of 3'-end RNA uridylation with a protein nanopore.

Post-transcriptional modifications of the 3'-ends of RNA molecules have a profound impact on their stability and processing in the cell. Uridylation, the addition of uridines to 3'-ends, has recently been found to be an important regulatory signal to stabilize the tagged molecules or to direct them toward degradation. Simple and cost-effective methods for the detection of this post-transcriptional modification are not yet available. Here, we demonstrate the selective and transient binding of 3'-uridylated ssRNAs inside the ß barrel of the staphylococcal α-hemolysin (αHL) nanopore and investigate the molecular basis of uridine recognition by the pore. We show the discrimination of 3'-oligouridine tails on the basis of their lengths and propose the αHL nanopore as a useful sensor for this biologically relevant RNA modification.

Nucleobase recognition at alkaline pH and apparent pKa of single DNA bases immobilised within a biological nanopore.

The four DNA bases are recognized in immobilized DNA strands at high alkaline pH by nanopore current recordings. Ionic currents through the biological nanopores are also employed to measure the apparent pK(a) values of single nucleobases within the immobilised DNA strands.

Fluorinated amphiphiles control the insertion of α-hemolysin pores into lipid bilayers.

The insertion of fully folded and assembled ion channels and pores into planar lipid bilayers for electrical recording has been facilitated by the use of conventional detergents at a final concentration below the critical micelle concentration (CMC). After the desired number of channels or pores (often one) has been incorporated into a bilayer, it is important to prevent further insertion events, which is often done by awkward techniques such as perfusion. Here, we show that the addition of single-chain fluorinated amphiphiles (F-amphiphiles) with zwitterionic, simple neutral, and neutral oligomeric headgroups at a concentration above the CMC prevents the further insertion of staphylococcal α-hemolysin pores, MspA pores, and Kcv potassium channels into lipid bilayers. We found the commercially available F(6)FC (fluorinated fos-choline with a C(6)F(13)C(2)H(4) chain) to be the least perturbing and most effective agent for this purpose. Bilayers are known to be resistant to F-amphiphiles, which in this case we suppose sequester the pores and channels within amphiphile aggregates. We suggest that F-amphiphiles might be useful in the fabrication of bilayer arrays for nanopore sensor devices and the rapid screening of membrane proteins.

Controlled translocation of individual DNA molecules through protein nanopores with engineered molecular brakes.

Protein nanopores may provide a cheap and fast technology to sequence individual DNA molecules. However, the electrophoretic translocation of ssDNA molecules through protein nanopores has been too rapid for base identification. Here, we show that the translocation of DNA molecules through the α-hemolysin protein nanopore can be slowed controllably by introducing positive charges into the lumen of the pore by site directed mutagenesis. Although the residual ionic current during DNA translocation is insufficient for direct base identification, we propose that the engineered pores might be used to slow down DNA in hybrid systems, for example, in combination with solid-state nanopores.

A primary hydrogen-deuterium isotope effect observed at the single-molecule level.

The covalent chemistry of reactants tethered within a single protein pore can be monitored by observing the time-dependence of ionic current flow through the pore, which responds to bond making and breaking in individual reactant molecules. Here we use this 'nanoreactor' approach to examine the reaction of a quinone with a thiol to form a substituted hydroquinone by reductive 1,4-Michael addition. Remarkably, a primary hydrogen-deuterium isotope effect is readily detected at the single-molecule level during prototropic rearrangement of an initial adduct. The observation of individual reaction intermediates allows the measurement of an isotope effect whether or not the step involved is rate limiting, which would not be the case in an ensemble measurement.

Identification of epigenetic DNA modifications with a protein nanopore.

Two DNA bases, 5-methylcytosine (5mC) and 5-hydroxymethylcytosine (hmC), marks of epigenetic modification, are recognized in immobilized DNA strands and distinguished from G, A, T and C by nanopore current recording. Therefore, if further aspects of nanopore sequencing can be addressed, the approach will provide a means to locate epigenetic modifications in unamplified genomic DNA.

Nucleobase recognition in ssDNA at the central constriction of the alpha-hemolysin pore.

Nanopores are under investigation for single-molecule DNA sequencing. The alpha-hemolysin (alphaHL) protein nanopore contains three recognition points capable of nucleobase discrimination in individual immobilized ssDNA molecules. We have modified the recognition point R(1) by extensive mutagenesis of residue 113. Amino acids that provide an energy barrier to ion flow (e.g., bulky or hydrophobic residues) strengthen base identification, while amino acids that lower the barrier weaken it. Amino acids with related side chains produce similar patterns of nucleobase recognition providing a rationale for the redesign of recognition points.

Molecular bases of cyclodextrin adapter interactions with engineered protein nanopores.

Engineered protein pores have several potential applications in biotechnology: as sensor elements in stochastic detection and ultrarapid DNA sequencing, as nanoreactors to observe single-molecule chemistry, and in the construction of nano- and micro-devices. One important class of pores contains molecular adapters, which provide internal binding sites for small molecules. Mutants of the alpha-hemolysin (alphaHL) pore that bind the adapter beta-cyclodextrin (betaCD) approximately 10(4) times more tightly than the wild type have been obtained. We now use single-channel electrical recording, protein engineering including unnatural amino acid mutagenesis, and high-resolution x-ray crystallography to provide definitive structural information on these engineered protein nanopores in unparalleled detail.

Droplet networks with incorporated protein diodes show collective properties.

Recently, we demonstrated that submicrolitre aqueous droplets submerged in an apolar liquid containing lipid can be tightly connected by means of lipid bilayers to form networks. Droplet interface bilayers have been used for rapid screening of membrane proteins and to form asymmetric bilayers with which to examine the fundamental properties of channels and pores. Networks, meanwhile, have been used to form microscale batteries and to detect light. Here, we develop an engineered protein pore with diode-like properties that can be incorporated into droplet interface bilayers in droplet networks to form devices with electrical properties including those of a current limiter, a half-wave rectifier and a full-wave rectifier. The droplet approach, which uses unsophisticated components (oil, lipid, salt water and a simple pore), can therefore be used to create multidroplet networks with collective properties that cannot be produced by droplet pairs.

Single-nucleotide discrimination in immobilized DNA oligonucleotides with a biological nanopore.

The sequencing of individual DNA strands with nanopores is under investigation as a rapid, low-cost platform in which bases are identified in order as the DNA strand is transported through a pore under an electrical potential. Although the preparation of solid-state nanopores is improving, biological nanopores, such as alpha-hemolysin (alphaHL), are advantageous because they can be precisely manipulated by genetic modification. Here, we show that the transmembrane beta-barrel of an engineered alphaHL pore contains 3 recognition sites that can be used to identify all 4 DNA bases in an immobilized single-stranded DNA molecule, whether they are located in an otherwise homopolymeric DNA strand or in a heteropolymeric strand. The additional steps required to enable nanopore DNA sequencing are outlined.

Enhanced translocation of single DNA molecules through alpha-hemolysin nanopores by manipulation of internal charge.

Both protein and solid-state nanopores are under intense investigation for the analysis of nucleic acids. A crucial advantage of protein nanopores is that site-directed mutagenesis permits precise tuning of their properties. Here, by augmenting the internal positive charge within the alpha-hemolysin pore and varying its distribution, we increase the frequency of translocation of a 92-nt single-stranded DNA through the pore at +120 mV by approximately 10-fold over the wild-type protein and dramatically lower the voltage threshold at which translocation occurs, e.g., by 50 mV for 1 event.s(-1).muM(-1). Further, events in which DNA enters the pore, but is not immediately translocated, are almost eliminated. These experiments provide a basis for improved nucleic acid analysis with protein nanopores, which might be translated to solid-state nanopores by using chemical surface modification.

Protein nanopores with covalently attached molecular adapters.

Molecular adapters are crucial for the stochastic sensing of organic analytes with alpha-hemolysin (alphaHL) protein nanopores when direct interactions between analytes and the pore cannot readily be arranged by conventional protein engineering. In our earlier studies, cyclodextrin adapters were lodged noncovalently within the lumen of the alphaHL pore. In the present work, we have realized the controlled covalent attachment of a beta-cyclodextrin (betaCD) adapter in the two possible molecular orientations inside alphaHL pores prepared by genetic engineering. There are two advantages to such a covalent system. First, the adapter cannot dissociate, which means there are no gaps during stochastic detection, a crucial advance for single-molecule exonuclease DNA sequencing where the continuous presence of a molecular adapter will be essential for reading individual nucleotides. Second, the ability to orient the adapter allows analytes to bind through only one of the two entrances to the betaCD cavity. We demonstrate that the covalently attached adapters can be used to alter the ion selectivity of the alphaHL pore, examine binding events at elevated temperatures, and detect analytes with prolonged dwell times.