Hybrid Iodide Perovskites of Divalent Alkaline Earth and Lanthanide Elements.

Hybrid halide perovskites AMIIX3 (A = ammonium cation, MII = divalent cation, X = Cl, Br, I) have been extensively studied but have only previously been reported for the divalent carbon group elements Ge, Sn, and Pb. While they have displayed an impressive range of optoelectronic properties, the instability of GeII and SnII and the toxicity of Pb have stimulated significant interest in finding alternatives to these carbon group-based perovskites. Here, we describe the low-temperature solid-state synthesis of five new hybrid iodide perovskites centered around divalent alkaline earth and lanthanide elements, with the general formula AMIII3 (A = methylammonium, MA; MII = Sr, Sm, Eu, and A = formamidinium, FA; MII = Sr, Eu). Structural, calorimetric, optical, photoluminescence, and magnetic properties of these materials are reported.

Time-resolved radioluminescence of the Cu(I) cluster Cu4I62-. Different responses to photo, X-ray, ß-ray and α-particle excitation.

Time-resolved radioluminescence (TRRL) properties of the Cu(I) cluster Cu4I62- upon pulsed X-ray, ß-ray or α-particle excitation are described. The longer (>2 µs) TRRL component displays exponential decay comparable to pulsed UV excitation; however, temporal behaviour at shorter times indicates that high local excited state density provides an alternative decay channel.

Conjugated Oligoelectrolytes for Long-Term Tumor Tracking with Incremental NIR-II Emission.

The design and synthesis of the near-infrared (NIR)-II emissive conjugated oligoelectrolyte COE-BBT are reported. COE-BBT has a solubility in aqueous media greater than 50 mg mL-1 , low toxicity, and a propensity to intercalate lipid bilayers, wherein it exhibits a higher emission quantum yield relative to aqueous media. Addition of COE-BBT to cells provides two emission channels, at ≈500 and ≈1020 nm, depending on the excitation wavelength, which facilitates in vitro confocal microscopy and in vivo animal imaging. The NIR-II emission of COE-BBT is used to track intracranial and subcutaneous tumor progression in mice. Of relevance is that the total NIR-II intensity increases over time. This phenomenon is attributed to a progressive attenuation of a COE-BBT self-quenching effect within the cells due to the expected dye dilution per cell as the tumor proliferates.

Efficiency of Thermally Activated Delayed Fluorescence Sensitized Triplet Upconversion Doubled in Three-Component System.

As in many fields, the most exciting endeavors in photon upconversion research focus on increasing the efficiency (upconversion quantum yield) and performance (anti-Stokes shift) while diminishing the cost of production. In this vein, studies employing metal-free thermally activated delayed fluorescence (TADF) sensitizers have garnered increased interest. Here, for the first time, the strategy of ternary photon upconversion is utilized with the TADF sensitizer 2,4,5,6-tetrakis(carbazol-9-yl)isophthalonitrile (4CzIPN), resulting in a doubling of the upconversion quantum yield in comparison to the binary system employing p-terphenyl as the emitter. In this ternary blend, the sensitizer 4CzIPN is paired with an intermediate acceptor, 1-methylnaphthalene, in addition to the emitter molecule, p-terphenyl, yielding a normalized upconversion quantum yield of 7.6% while maintaining the 0.83 eV anti-Stokes shift. These results illustrate the potential benefits of utilizing this strategy of energy-funneling, previously used only with heavy-metal based sensitizers, to increase the performance of these photon upconversion systems.

Selection, drift, and constraint in cypridinid luciferases and the diversification of bioluminescent signals in sea fireflies.

Understanding the genetic causes of evolutionary diversification is challenging because differences across species are complex, often involving many genes. However, cases where single or few genetic loci affect a trait that varies dramatically across a radiation of species provide tractable opportunities to understand the genetics of diversification. Here, we begin to explore how diversification of bioluminescent signals across species of cypridinid ostracods ("sea fireflies") was influenced by evolution of a single gene, cypridinid-luciferase. In addition to emission spectra ("colour") of bioluminescence from 21 cypridinid species, we report 13 new c-luciferase genes from de novo transcriptomes, including in vitro assays to confirm function of four of those genes. Our comparative analyses suggest some amino acid sites in c-luciferase evolved under episodic diversifying selection and may be associated with changes in both enzyme kinetics and colour, two enzymatic functions that directly impact the phenotype of bioluminescent signals. The analyses also suggest multiple other amino acid positions in c-luciferase evolved neutrally or under purifying selection, and may have impacted the variation of colour of bioluminescent signals across genera. Previous mutagenesis studies at candidate sites show epistatic interactions, which could constrain the evolution of c-luciferase function. This work provides important steps toward understanding the genetic basis of diversification of behavioural signals across multiple species, suggesting different evolutionary processes act at different times during a radiation of species. These results set the stage for additional mutagenesis studies that could explicitly link selection, drift, and constraint to the evolution of phenotypic diversification.

Experimental and theoretical study of energy transfer in a chromophore triad: What makes modeling dynamics successful?

Simulation of electronic dynamics in realistically large molecular systems is a demanding task that has not yet achieved the same level of quantitative prediction already realized for its static counterpart. This is particularly true for processes occurring beyond the Born-Oppenheimer regime. Non-adiabatic molecular dynamics (NAMD) simulations suffer from two convoluted sources of error: numerical algorithms for dynamics and electronic structure calculations. While the former has gained increasing attention, particularly addressing the validity of ad hoc methodologies, the effect of the latter remains relatively unexplored. Indeed, the required accuracy for electronic structure calculations to reach quantitative agreement with experiment in dynamics may be even more strict than that required for static simulations. Here, we address this issue by modeling the electronic energy transfer in a donor-acceptor-donor (D-A-D) molecular light harvesting system using fewest switches surface hopping NAMD simulations. In the studied system, time-resolved experimental measurements deliver complete information on spectra and energy transfer rates. Subsequent modeling shows that the calculated electronic transition energies are "sufficiently good" to reproduce experimental spectra but produce over an order of magnitude error in simulated dynamical rates. We further perform simulations using artificially shifted energy gaps to investigate the complex relationship between transition energies and modeled dynamics to understand factors affecting non-radiative relaxation and energy transfer rates.

Photoswitchable Conjugated Oligoelectrolytes for a Light-Induced Change of Membrane Morphology.

The synthesis of a new conjugated oligoelectrolyte (COE), namely DSAzB, is described, which contains a conjugated core bearing a diazene moiety in the center of its electronically delocalized structure. Similar to structurally related phenylenevinylene-based COEs, DSAzB readily intercalates into model and natural lipid bilayer membranes. Photoinduced isomerization transforms the linear trans COE into a bent or C-shape form. It is thereby possible to introduce DSAzB into the bilayer of a cell and disrupt its integrity by irradiation with light. This leads to controlled permeabilization of membranes, as demonstrated by the release of calcein from DMPG/DMPC vesicles and by propidium iodide influx experiments on S. epidermidis. Both experiments support that the permeabilization is selective for the light stimulus, highly efficient, and repeatable. Target-selective and photoinduced actions demonstrated by DSAzB may have broad applications in biocatalysis and related biotechnologies.

Near-Infrared and Visible Photoactivation to Uncage Carbon Monoxide from an Aqueous-Soluble PhotoCORM.

Multiphoton excitation allows one to access high energy excited states and perform valuable tasks in biological systems using tissue penetrating near-infrared (NIR) light. Here, we describe new photoactive manganese tricarbonyl complexes incorporating the ligand 4'-p-N,N-bis(2-hydroxyethyl)amino-benzyl-2,2':6',2″-terpyridine (TPYOH), which can serve as an antenna for two photon NIR excitation. Solutions of Mn(CO)3(TPYOH)X (X = Br- or CF3SO3-) complexes are very photoactive toward CO release under visible light excitation (405 nm, 451 nm). The same responses were also triggered by multiphoton excitation at 750 and 800 nm. In this context, we discuss the potential applications of these complexes as visible/NIR light photoactivated carbon monoxide releasing moieties (photoCORMs). We also report the isolation and crystal structures of the TPYOH complexes Mn(TPYOH)Cl2 and [Mn(TPYOH)2](CF3SO3)2, to illustrate a possible photolysis product(s).

Ultrafast Time-Resolved Studies on Fluorescein for Recognition Strands Architecture in Amyloid Fibrils.

Protein aggregation is associated with numerous devastating diseases such as Alzheimer's, Parkinson's, and prion diseases. Development of therapeutics would benefit from knowledge of the structural organization of protein molecules in these amyloid aggregates, particularly in their aqueous biological milieu. However, detailed structural studies to date have been mainly on the solid state and have required large quantities of purified aggregate. Moreover, these conventional methods require the aggregated assembly to remain structurally stable over days or weeks required to perform the experiment, whereas the pathologically relevant species of in vivo aggregates may be shorter lived. Here, we show the organization of protein chains in dissolved amyloid aggregates can be readily determined spectroscopically using minute quantities of fluorescein-labeled protein segments in a matter of minutes. Specifically, we investigated the possibility of using the ultrafast dynamics of fluorescein to distinguish among three categories of ß-sheet geometry: (1) antiparallel in-register, (2) parallel in-register, or (3) antiparallel out-of-register. Fluorescein, the most commonly used staining dye in biology and medicine, was covalently attached to the N-termini of peptide sequences selected from a library of known amyloid crystal structures. We investigated the aggregates in solution using steady-state and time-resolved absorption and fluorescence spectroscopy. We found that the dynamics of fluorescein relaxation from the excited state revealed amyloid structure-specific information. Particularly, the nonfluorescent cation form of fluorescein showed remarkable sensitivity to local environments created during aggregation. We demonstrate that time-resolved absorption is capable of differentiating strand organization in ß-sheet aggregates when strong intermolecular coupling between chromophores occurs. This approach can be useful in optical recognition of specific fibril architectures of amyloid aggregates.

A Membrane-Intercalating Conjugated Oligoelectrolyte with High-Efficiency Photodynamic Antimicrobial Activity.

A membrane-intercalating conjugated oligoelectrolyte (COE), PTTP, was designed and synthesized with the goal of providing red-shifted absorption spectra relative to previously synthesized COE analogs. Specifically, electron-rich and electron-poor subunits were introduced in the conjugated backbone to modulate the band gap. PTTP exhibits maxima of absorption at 507 nm and of emission at 725 nm. PTTP can also efficiently function to generate singlet oxygen in situ (ΦΔ ≈20 %) and has appropriate topology and dimensions to interact with lipid membranes. The resulting rapid membrane insertion and sensitizing ability provide PTTP with a highly efficient antibacterial capability under a low light dose (0.6 J cm-2 ) toward Gram-negative bacteria E. coli, making it a remarkably efficient optically mediated antimicrobial agent.

Widely Tunable Infrared Antennas Using Free Carrier Refraction.

We demonstrate tuning of infrared Mie resonances by varying the carrier concentration in doped semiconductor antennas. We fabricate spherical silicon and germanium particles of varying sizes and doping concentrations. Single-particle infrared spectra reveal electric and magnetic dipole, quadrupole, and hexapole resonances. We subsequently demonstrate doping-dependent frequency shifts that follow simple Drude models, culminating in the emergence of plasmonic resonances at high doping levels and long wavelengths. These findings demonstrate the potential for actively tuning infrared Mie resonances by optically or electrically modulating charge carrier densities, thus providing an excellent platform for tunable metamaterials.

Photoreactivity of a quantum dot-ruthenium nitrosyl conjugate.

We describe the use of cadmium telluride quantum dots (CdTe QDs) as antennas for the photosensitization of nitric oxide release from a ruthenium nitrosyl complex with visible light excitation. The CdTe QDs were capped with mercaptopropionic acid to make them water-soluble, and the ruthenium nitrosyl complex was cis-[Ru(NO)(4-ampy)(bpy)2](3+) (Ru-NO; bpy is 2,2'-bipyridine, and 4-ampy is 4-aminopyridine). Solutions of these two components demonstrated concentration-dependent quenching of the QD photoluminescence (PL) as well as photoinduced release of NO from Ru-NO when irradiated by 530 nm light. A NO release enhancement of ∼8 times resulting from this association was observed under longer wavelength excitation in visible light range. The dynamics of the quenching determined by both PL and transient absorption measurements were probed by ultrafast flash photolysis. A charge transfer mechanism is proposed to explain the quenching of the QD excited states as well as the photosensitized release of NO from Ru-NO.

Mapping orientational order in a bulk heterojunction solar cell with polarization-dependent photoconductive atomic force microscopy.

New methods connecting molecular structure, self-organization, and optoelectronic performance are important for understanding the current generation of organic photovoltaic (OPV) materials. In high power conversion efficiency (PCE) OPVs, light-harvesting small-molecules or polymers are typically blended with fullerene derivatives and deposited in thin films, forming a bulk heterojunction (BHJ), a self-assembled three-dimensional nanostructure of electron donors and acceptors that separates and transports charges. Recent data suggest micrometer-scale orientational order of donor domains exists within this complex nanomorphology, but the link to the optoelectronic properties is yet unexplored. Here we introduce polarization-dependent, photoconductive atomic force microscopy (pd-pcAFM) as a combined probe of orientational order and nanoscale optoelectronic properties (∼20 nm resolution). Using the donor 7,7'-(4,4-bis(2-ethylhexyl)-4H-silolo[3,2-b:4,5-b']dithiophene-2,6-diyl)bis(6-fluoro-4-(5'-hexyl[2,2'-bithiophen]-5-yl)benzo[c][1,2,5]thiadiazole), p-DTS(FBTTh2)2, we show significant spatial dependence of the nanoscale photocurrent with polarized light in both pristine and BHJ blends (up to 7.0% PCE) due to the local alignment of the molecular transition dipoles. By mapping the polarization dependence of the nanoscale photocurrent, we estimate the molecular orientation and orientational order parameter. Liquid crystalline disclinations are observed in all films, in agreement with complementary electron microscopy experiments, and the order parameter exceeds 0.3. The results demonstrate the utility of pd-pcAFM to investigate the optical/structural anisotropy that exists within a well-performing BHJ system and its relationship to optoelectronic properties on both the nanometer and micrometer length scales.

Enhancement of the photoresponse in organic field-effect transistors by incorporating thin DNA layers.

A mechanistic study of the DNA interfacial layer that enhances the photoresponse in n-type field-effect transistors (FET) and lateral photoconductors using a solution-processed fullerene derivative embedded with disperse-red dye, namely PCBDR, is reported. Incorporation of the thin DNA layer simultaneously leads to increasing the electron injection from non-Ohmic contacts into the PCBDR active layer in dark and to increasing the photocurrent under irradiation. Such features lead to the observation of the enhancement of the photoresponsivity in PCBDR FETs up to 10(3) . Kelvin probe microscopy displays that in the presence of the DNA layer, the surface potential of PCBDR has a greater change in response to irradiation, which is rationalized by a larger number of photoinduced surface carriers. Transient absorption spectroscopy confirms that the increase in photoinduced carriers in PCBDR under irradiation is primarily ascribed to the increase in exciton dissociation rates through the PCBDR/DNA interface and this process can be assisted by the interfacial dipole interaction.

Data-driven discovery of energy materials: efficient BaM2Si3O10 : Eu2+ (M = Sc, Lu) phosphors for application in solid state white lighting.

In developing phosphors for application in solid state lighting, it is advantageous to target structures from databases with highly condensed polyhedral networks that produce rigid host compounds. Rigidity limits channels for non-radiative decay that will decrease the luminescence quantum yield. BaM(2)Si(3)O(10) (M = Sc, Lu) follows this design criterion and is studied here as an efficient Eu(2+)-based phosphor. M = Sc(3+) and Lu(3+) compounds with Eu(2+) substitution were prepared and characterized using synchrotron X-ray powder diffraction and photoluminescence spectroscopy. Substitution with Eu(2+) according to Ba(1-x)Eu(x)Sc(2)Si(3)O(10) and Ba(1-x)Eu(x)Lu(2)Si(3)O(10) results in UV-to-blue and UV-to-blue-green phosphors, respectively. Interestingly, substitution with Eu(2+) in the Lu(3+) containing material produces two emission peaks at low temperature and with 365 nm excitation, as allowed by the two substitution sites. The photoluminescence of the Sc(3+) compound is robust at high temperature, decreasing by only 25% of its room temperature intensity at 503 K, while the Lu-analogue suffers a large drop (75%) from its room temperature intensity. The decrease in emission intensity is explained as stemming from charge transfer quenching due to the short distances separating the luminescent centers on the Lu(3+) substitution site. The correlation between structure and optical response in these two compounds indicates that even though the structures are three-dimensionally connected, high symmetry is required to prevent structural distortions that could impact photoluminescence.

Average and local structural origins of the optical properties of the nitride phosphor La(3-x)Ce(x)Si6N11 (0 < x ≤ 3).

Structural intricacies of the orange-red nitride phosphor system La(3-x)Ce(x)Si6N11 (0 < x ≤ 3) have been elucidated using a combination of state-of-the art tools, in order to understand the origins of the exceptional optical properties of this important solid-state lighting material. In addition, the optical properties of the end-member (x = 3) compound, Ce3Si6N11, are described for the first time. A combination of synchrotron powder X-ray diffraction and neutron scattering is employed to establish site preferences and the rigid nature of the structure, which is characterized by a high Debye temperature. The high Debye temperature is also corroborated from ab initio electronic structure calculations. Solid-state (29)Si nuclear magnetic resonance, including paramagnetic shifts of (29)Si spectra, are employed in conjunction with low-temperature electron spin resonance studies to probes of the local environments of Ce ions. Detailed wavelength-, time-, and temperature-dependent luminescence properties of the solid solution are presented. Temperature-dependent quantum yield measurements demonstrate the remarkable thermal robustness of luminescence of La2.82Ce0.18Si6N11, which shows little sign of thermal quenching, even at temperatures as high as 500 K. This robustness is attributed to the highly rigid lattice. Luminescence decay measurements indicate very short decay times (close to 40 ns). The fast decay is suggested to prevent strong self-quenching of luminescence, allowing even the end-member compound Ce3Si6N11 to display bright luminescence.

Nitric oxide releasing materials triggered by near-infrared excitation through tissue filters.

Novel materials for the phototherapeutic release of the bioregulator nitric oxide (nitrogen monoxide) are described. Also reported is a method for scanning these materials with a focused NIR beam to induce photouncaging while minimizing damage from local heating. The new materials consist of poly(dimethylsiloxane) composites with near-infrared-to-visible upconverting nanoparticles (UCNPs) that are cast into a biocompatible polymer disk (PD). These PDs are then impregnated with the photochemical nitric oxide precursor Roussin's black salt (RBS) to give UCNP_RBS_PD devices that generate NO when irradiated with 980 nm light. When the UCNP_RBS_PD composites were irradiated with NIR light through filters composed of porcine tissue, physiologically relevant NO concentrations were released, thus demonstrating the potential of such devices for minimally invasive phototherapeutic applications.

Molecular doping enhances photoconductivity in polymer bulk heterojunction solar cells.

Addition of low concentrations (<1:100, dopant:donor) of a fluorinated p-type dopant, F4-TCNQ leads to a considerable enhancement of the photocurrent in PCDTBT:PC70 BM bulk heterojunction solar cells. As a result, the power conversion efficiency increases from 6.41% to 7.94 %.

An efficient, thermally stable cerium-based silicate phosphor for solid state white lighting.

A novel cerium-substituted, barium yttrium silicate has been identified as an efficient blue-green phosphor for application in solid state lighting. Ba9Y2Si6O24:Ce(3+) was prepared and structurally characterized using synchrotron X-ray powder diffraction. The photoluminescent characterization identified a major peak at 394 nm in the excitation spectrum, making this material viable for near-UV LED excitation. An efficient emission, with a quantum yield of ≈60%, covers a broad portion (430-675 nm) of the visible spectrum, leading to the blue-green color. Concentration quenching occurs when the Ce(3+) content exceeds ≈3 mol %, whereas high temperature photoluminescent measurements show a 25% drop from the room temperature efficiency at 500 K. The emission of this compound can be red-shifted via the solid solution Ba9(Y(1-y)Sc(y))(1.94)Ce(0.06)Si6O24 (y = 0.1, 0.2), allowing for tunable color properties when device integration is considered.

All-conjugated triblock polyelectrolytes.

All-conjugated triblock polyfluorenes with well-defined molecular weights and low polydispersities are synthesized via chain-growth Suzuki-Miyaura polymerization. Ionization of pendant alkylbromide chains by pyridine affords amphiphilic triblock polyelectrolytes with neutral/charged/neutral or charged/neutral/charged segments. The immiscible blocks lead to aggregation in polar and nonpolar solvents, and to complex surface morphologies depending on the polarity of the substrate. These triblock polyelectrolytes can also be used as interfacial layers in polymer light-emitting diodes to facilitate electron injection from aluminum.