Removal Efficiency of Insoluble ß-Cyclodextrin Polymer from Water-Soluble Carcinogenic Direct Azo Dyes.

A batch system was applied to study the adsorption of three dyes (methyl violet, eriochrom black T and helianthin) from aqueous solution onto ß-cyclodextrin polymer, synthesized by using citric acid as a cross linking agent. This polymer lets to adsorb only methyl violet for this effect, several operator variables was checked only with this kind of dye, the removal efficiently increases with increase in adsorbent amount; elevation of temperature lets also to improve the dye adsorption; ionic strength has not effect on dye adsorption process, for the pH we have remarked a slight decrease in removal efficiently with increasing of pH values. Equilibrium study was investigated by applying three models (Langumir, Frendlich and Temkin), results show that Langumir isotherm is the appropriate model. FTIR spectra show the complex inclusion formation which dominates the adsorption mechanism, confirmed by the absence of characteristic peaks of methyl violet in ß-cyclodextrin after adsorption.

Effect of Autoclaving on the Physicochemical Properties and Biological Activity of Aluminum Oxyhydroxide Used as an Adjuvant in Vaccines.

The long-term biodistribution of non-biodegradable microstructures or nanostructures used in vaccinations is widely unknown. This is the case for aluminum oxyhydroxide, the most widely used vaccine adjuvant, which is a nanocrystalline compound that spontaneously forms nanoprecipitates. Although generally well-tolerated, aluminum oxyhydroxide is detected in macrophages a long time after vaccination in individuals predisposed to the development of systemic and neurological aspects of the autoimmune (inflammatory) syndrome induced by modified adjuvant. In the present study, we established that the terminal sterilization of aluminum oxyhydroxide by autoclaving in final container vials produced measurable changes in its physicochemical properties. Moreover, we found that these changes included (1) a decreasing in the pH of aluminum oxyhydroxide solutions, (2) a reduction in the adsorption capacity of bovine serum albumin, (3) a shift in the angle of X-ray diffraction, (4) a reduction in the lattice spacing, causing the crystallization and biopersistence of modified aluminum oxyhydroxide in the macrophage, as well as in muscle and the brain.

Single-step electrohydrodynamic separation of 1-150 kbp in less than 5 min using homogeneous glass/adhesive/glass microchips.

Electrohydrodynamic migration, which is based on hydrodynamic actuation with an opposing electrophoretic force, enables the separation of DNA molecules of 3-100 kbp in glass capillary within 1 h. Here, we wish to enhance these performances using microchip technologies. This study starts with the fabrication of microchips with uniform surfaces, as motivated by our observation that band splitting occurs in microchannels made out of heterogeneous materials such as glass and silicon. The resulting glass-adhesive-glass microchips feature the highest reported bonding strength of 11 MPa for such materials (115 kgf/cm2), a high lateral resolution of critical dimension 5 µm, and minimal auto-fluorescence. These devices enable us to report the separation of 13 DNA bands in the size range of 1-150 kbp in one experiment of 5 min, i.e. 13 times faster than with capillary. In turn, we observe that bands split during electrohydrodynamic migration in heterogeneous glass-silicon but not in homogeneous glass-adhesive-glass microchips. We suggest that this effect arises from differential Electro-Osmotic Flow (EOF) in between the upper and lower walls of heterogeneous channels, and provide evidence that this phenomenon of differential EOF causes band broadening in electrophoresis during microchip electrophoresis. We finally prove that our electrohydrodynamic separation compares very favorably to microchip technologies in terms of resolution length and features the broadest analytical range reported so far.

A tunable filter for high molecular weight DNA selection and linked-read sequencing.

In third generation sequencing, the production of quality data requires the selection of molecules longer than ∼20 kbp, but the size selection threshold of most purification technologies is smaller than this target. Here, we describe a technology operated in a capillary with a tunable selection threshold in the range of 3 to 40 kbp controlled by an electric field. We demonstrate that the selection cut-off is sharp, the purification yield is high, and the purification throughput is scalable. We also provide an analytical model that the actuation settings of the filter. The selection of high molecular weight genomic DNA from the melon Cucumis melo L., a diploid organism of ∼0.45 Gbp, is then reported. Linked-read sequencing data show that the N50 phase block size, which scores the correct representation of two chromosomes, is enhanced by a factor of 2 after size selection, establishing the relevance and versatility of our technology.

µLAS technology for DNA isolation coupled to Cas9-assisted targeting for sequencing and assembly of a 30 kb region in plant genome.

Cas9-assisted targeting of DNA fragments in complex genomes is viewed as an essential strategy to obtain high-quality and continuous sequence data. However, the purity of target loci selected by pulsed-field gel electrophoresis (PFGE) has so far been insufficient to assemble the sequence in one contig. Here, we describe the µLAS technology to capture and purify high molecular weight DNA. First, the technology is optimized to perform high sensitivity DNA profiling with a limit of detection of 20 fg/µl for 50 kb fragments and an analytical time of 50 min. Then, µLAS is operated to isolate a 31.5 kb locus cleaved by Cas9 in the genome of the plant Medicago truncatula. Target purification is validated on a Bacterial Artificial Chromosome plasmid, and subsequently carried out in whole genome with µLAS, PFGE or by combining these techniques. PacBio sequencing shows an enrichment factor of the target sequence of 84 with PFGE alone versus 892 by association of PFGE with µLAS. These performances allow us to sequence and assemble one contig of 29 441 bp with 99% sequence identity to the reference sequence.

New Polymer Inclusion Membrane Containing ß-Cyclodextrin Polymer: Application for Pharmaceutical Pollutant Removal from Waste Water.

We present herein the preparation of novel polymer inclusion membranes (PIMs) containing insoluble ß-CD polymer as a carrier, polyvinyl chloride as a base polymer, and dibuthylphtalate (DBP) as a plasticizer in varying proportions. The prepared PIMs can be obtained by a simple, fast, and high-yield preparation process. Physicochemical characterizations of such membranes occurred in a homogeneous structure. In addition, Fourier-transform infrared Spectroscopy (FT-IR) analysis found that DBP was inserted between these polymeric chains by non-covalent interactions. This led to a spacing of PVC/poly(ß-cyclodextrin) chains inducing a better access of guest molecules to PIM cyclodextrins. To achieve the elimination of ibuprofen and progesterone, two examples of emerging environmental contaminants that can lead to possible alterations to aquatic environments and affect human health, the effect of three operating parameters was studied (pH, the proportion of ß-cyclodextrin polymer, and wastewater agitation). The proportion of ß-cyclodextrin polymer and wastewater agitation had a favorable influence on drug extraction at 10 ppm. The PIMs containing ß-cyclodextrin polymer was unstable in basic conditions and was more effective at acidic pH. These initial results demonstrate the high potential for drug extraction of this polymer.

Enhanced Dissolution and Oral Bioavailability of Cyclosporine A: Microspheres Based on αß-Cyclodextrins Polymers.

Cyclosporine (CsA) has a selective property of suppressing various T-lymphocyte functions. This is of utmost importance in preventing allograft rejection by several organ transplantations, as well as in the treatment of systemic and local autoimmune disorders. However, the poor water solubility of CsA can be a major hurdle for its absorption into the blood stream, which leads to low bioavailability and thus less efficacy. The aim of this study was to prepare, characterize, and evaluate in vitro as well as in vivo, the potential of the innovative CsA drug delivery system. The latter contains CsA in spherical amorphous solid dispersion (SASD) which is embedded in an original α-cyclodextrin and ß-cyclodextrin polymer mixture (Poly-αß-CD) as a multifunctional amorphous carrier. The new developed SASD formulation showed that CsA was molecularly dispersed in αß-cyclodextrins in an amorphous form, as was confirmed by physicochemical characterization studies. Interestingly, the peptide secondary structure, and thus, the drug activity was not impacted by the preparation of SASD as was shown by circular dichroism. Furthermore, the in vitro CsA release profile kinetics was almost identical to the commercially available product Neoral®. This study presents the first in vivo proof-of-concept for a novel drug delivery system based on Poly-αß-CD containing CsA, with SASD allowing for increased bioavailibility. The pharmacokinetic parameters of cyclosporine A from the spherical spray-dried dispersion formulation was demonstrated in a "rat" animal model. For comparison, the commercially available Neoral® was studied. Importantly, the pharmacokinetic parameters were improved by extending Tmax from 2 to 3 h after the oral administration in rats, and eventually preventing the enterohepatic circulation. All these results clearly demonstrate the improved pharmacokinetic parameters and enhanced bioavailability of CsA in the new developed drug delivery system. These data demonstrated the superiority of the newly developed Poly-αß-CD formulation for oral administration of the poorly soluble CsA in vivo without altering its secondary structure. Poly-αß-CD can be a very useful tool for the oral administration of poorly water-soluble drugs.

Noribogaine is a G-protein biased κ-opioid receptor agonist.

Noribogaine is the long-lived human metabolite of the anti-addictive substance ibogaine. Noribogaine efficaciously reaches the brain with concentrations up to 20 µM after acute therapeutic dose of 40 mg/kg ibogaine in animals. Noribogaine displays atypical opioid-like components in vivo, anti-addictive effects and potent modulatory properties of the tolerance to opiates for which the mode of action remained uncharacterized thus far. Our binding experiments and computational simulations indicate that noribogaine may bind to the orthosteric morphinan binding site of the opioid receptors. Functional activities of noribogaine at G-protein and non G-protein pathways of the mu and kappa opioid receptors were characterized. Noribogaine was a weak mu antagonist with a functional inhibition constants (Ke) of 20 µM at the G-protein and ß-arrestin signaling pathways. Conversely, noribogaine was a G-protein biased kappa agonist 75% as efficacious as dynorphin A at stimulating GDP-GTP exchange (EC50=9 µM) but only 12% as efficacious at recruiting ß-arrestin, which could contribute to the lack of dysphoric effects of noribogaine. In turn, noribogaine functionally inhibited dynorphin-induced kappa ß-arrestin recruitment and was more potent than its G-protein agonistic activity with an IC50 of 1 µM. This biased agonist/antagonist pharmacology is unique to noribogaine in comparison to various other ligands including ibogaine, 18-MC, nalmefene, and 6'-GNTI. We predict noribogaine to promote certain analgesic effects as well as anti-addictive effects at effective concentrations>1 µM in the brain. Because elevated levels of dynorphins are commonly observed and correlated with anxiety, dysphoric effects, and decreased dopaminergic tone, a therapeutically relevant functional inhibition bias to endogenously released dynorphins by noribogaine might be worthy of consideration for treating anxiety and substance related disorders.