RESUMEN
Nanoparticles have emerged as promising theranostic tools for biomedical applications, notably in the treatment of cancers. However, to fully exploit their potential, a thorough understanding of their biodistribution is imperative. In this context, we prepared radioactive [64Cu]-exchanged faujasite nanosized zeolite ([64Cu]-FAU) to conduct positron emission tomography (PET) imaging tracking in preclinical glioblastoma models. In vivo results revealed a rapid and gradual accumulation over time of intravenously injected [64Cu]-FAU zeolite nanocrystals within the brain tumor, while no uptake in the healthy brain was observed. Although a specific tumor targeting was observed in the brain, the kinetics of uptake into tumor tissue was found to be dependent on the glioblastoma model. Indeed, our results showed a rapid uptake in U87-MG model while in U251-MG glioblastoma model tumor uptake was gradual over the time. Interestingly, a [64Cu] activity, decreasing over time, was also observed in organs of elimination such as kidney and liver without showing a difference in activity between both glioblastoma models. Ex vivo analyses confirmed the presence of zeolite nanocrystals in brain tumor with detection of both Si and Al elements originated from them. This radiolabelling strategy, performed for the first time using nanozeolites, enables precise tracking through PET imaging and confirms their accumulation within the glioblastoma. These findings further bolster the potential use of zeolite nanocrystals as valuable theranostic tools.
Asunto(s)
Neoplasias Encefálicas , Radioisótopos de Cobre , Glioblastoma , Nanopartículas , Tomografía de Emisión de Positrones , Zeolitas , Animales , Zeolitas/química , Radioisótopos de Cobre/química , Humanos , Distribución Tisular , Ratones , Línea Celular Tumoral , Glioblastoma/diagnóstico por imagen , Glioblastoma/metabolismo , Glioblastoma/patología , Neoplasias Encefálicas/diagnóstico por imagen , Neoplasias Encefálicas/metabolismo , Nanopartículas/química , Ratones DesnudosRESUMEN
The simple preparation of mesoporous NiS2//MoS2 composite catalyst through a one-pot solvothermal method is presented. The improvement of the specific surface area (220 m2/g) and the construction of the porous structure are realized by this method in the case of no support. The organics acts as a microscopic binder contribute to uniform stacking of MoS2 with NiS2 clusters. The composite structure including NiS2 and MoS2 was obtained (proved by XRD, XPS, TEM, IR, UV-vis and RAMAN) and changed the microelectronic environment of the active metal surface (DFT calculation). The mesoporous NiS2//MoS2 catalyst (Ni1Mo1-200) showed an excellent hydrodesulfurization performance of dibenzothiophene (DBT conversion: 78 % at 260 °C) and a high ratio of direct desulfurization pathway (SDDS/HYD = 16.6) at a low reaction temperature. By combining the characterization and theoretical calculation results, the advantages of this NiS2//MoS2 composite structure in synergistic catalysis was further confirmed.
RESUMEN
Numerous pieces of evidence in the literature suggest that zeolitic materials exhibit significant intrinsic flexibility as a consequence of the spring-like behavior of Si-O and Al-O bonds and the distortion ability of Si-O-Si and Al-O-Si angles. Understanding the origin of flexibility and how it may be tuned to afford high adsorption selectivity in zeolites is a big challenge. Zeolite flexibility may be triggered by changes in temperature, pressure, or chemical composition of the framework and extra-framework compounds, as well as by the presence of guest molecules. Therefore, zeolite flexibility can be classified into three categories: (i) temperature and pressure-induced flexibility; (ii) guest-induced flexibility; and (iii) compositionally-induced flexibility. An outlook on zeolite flexibility and the challenges met during the precise experimental evaluations of zeolites will be discussed. Overcoming these challenges will provide an important tool for designing novel selective adsorbents.
RESUMEN
Zeolites with uniform micropores are important shape-selective catalysts. However, the external acid sites of zeolites have a negative impact on shape-selective catalysis, and the microporosity may lead to serious diffusion limitation. Herein, we report on the direct synthesis of hierarchical hollow STW-type zeolite single crystals with a siliceous exterior. In an alkalinous fluoride medium, the nucleation of highly siliceous STW zeolites takes place first, and the nanocrystals are preferentially aligned on the outer surface of the gel agglomerates to grow into single crystalline shells upon crystallization. The lagged crystallization of the internal Al-rich amorphous gels onto the inner surface of nanocrystalline zeolite shells leads to the formation of hollow cavities in the core of the zeolite crystals. The hollow zeolite single crystals possess a low-to-high aluminum gradient from the surface to the core, resulting in an intrinsic inert external surface, and exhibit superior catalytic performance in toluene methylation reactions.
RESUMEN
The utilization of methane for chemical production, often considered as the future of petrochemistry, historically could not compete economically with conventional processes due to higher investment costs. Achieving sustainability and decarbonization of the downstream industry by integration with a methane-to-chemicals process may provide an opportunity to unlock the future for these technologies. Gas-to-chemicals is an efficient tool to boost the decarbonization potential of renewable energy. While the current implementation of carbon capture utilization and storage (CCUS) technologies is of great importance for industrial decarbonization, a shift to greener CO2-free processes and CO2 utilization from external sources for manufacturing valuable goods is highly preferred. This review outlines potential options for how a methane-to-chemicals process could support decarbonization of the downstream industry.
RESUMEN
Structural flexibility is an intrinsic feature of zeolites, and the characterization of such dynamic behavior is key to maximizing their performance and realizing their potential in both existing and emerging applications. Here, the flexibility of a high-aluminum nano-sized RHO zeolite is directly visualized with in situ TEM for the first time. Variable temperature experiments directly observe the physical expansion of the discrete nanocrystals in response to changes in both guest-molecule chemistry (Ar vs CO2) and temperature. The observations are complemented by operando FTIR spectroscopy verifying the nature of the adsorbed CO2 within the pore network, the desorption kinetics of carbonate species, and changes to the structural bands at high temperatures. Quantum chemical modeling of the RHO zeolite structure substantiates the effect of cation (Na+ and Cs+) mobility in the absence and presence of CO2 on the flexibility behavior of the structure. The results demonstrate the combined influences of temperature and CO2 on the structural flexibility consistent with the experimental microscopy observations.
RESUMEN
Silanols are key players in the application performance of zeolites, yet, their localization and hydrogen bonding strength need more studies. The effects of post-synthetic ion exchange on nanosized chabazite (CHA), focusing on the formation of silanols, were studied. The significant alteration of the silanols of the chabazite nanozeolite upon ion exchange and their effect on the CO2 adsorption capacity was revealed by solid-state nuclear magnetic resonance (NMR), Fourier-transform infrared (FTIR) spectroscopy, and periodic density functional theory (DFT) calculations. Both theoretical and experimental results revealed changing the ratio of extra-framework cations in CHA zeolites changes the population of silanols; decreasing the Cs+/K+ ratio creates more silanols. Upon adsorption of CO2, the distribution and strength of the silanols also changed with increased hydrogen bonding, thus revealing an interaction of silanols with CO2 molecules. To the best of our knowledge, this is the first evidence of the interplay between alkali-metal cations and silanols in nanosized CHA.
RESUMEN
Well-dispersed PdIn bimetallic alloy nanoparticles (1-4 nm) were immobilized on mesostructured silica by an in situ capture-alloying strategy, and PdIn-In2O3 interfaces were rationally constructed by changing the In2O3 loading and reduction temperature. The catalytic performance for benzyl alcohol partial oxidation was evaluated, and a catalytic synergy was observed. The Pd-rich PdIn-In2O3 interface is prone to be formed on the catalyst with a low In2O3 loading after being reduced at 300 °C. It was demonstrated that the Pd-rich PdIn-In2O3 interface was more active for benzyl alcohol partial oxidation than In-rich Pd2In3 species, which was likely to be formed at a high reduction temperature (400 °C). The high catalytic activity on the Pd-rich PdIn-In2O3 interface was attributed to the exposure of more Pd-enriched active sites, and an optimized PdIn-In2O3/Pd assemble ratio enhanced the oxygen transfer during partial oxidation. The density functional theory (DFT) calculation confirmed that the Pd-rich Pd3In1(111)-In2O3 interface facilitated the activation of oxygen molecules, resulting in high catalytic activity.
RESUMEN
The precise location and role of all types of hydroxyls in zeolites are still enigmatic, and their control permits tailoring of novel properties increasing the efficiency of catalysts and adsorbents in industrial processes for cleaner energy.
RESUMEN
The identification of acid and nonacid species at the external surface of zeolites remains a major challenge, in contrast to the extensively-studied internal acid sites. Here, it is shown that the synthesis of zeolite ZSM-5 samples with distinct particle sizes, combined with solid-state NMR and computational studies of trimethylphosphine oxide (TMPO) adsorption, provides insight into the chemical species on the external surface of the zeolite crystals. 1 H-31 P HETCOR NMR spectra of TMPO-loaded zeolites exhibit a broad correlation peak at δP â¼35-55â ppm and δH â¼5-12â ppm assigned to external SiOH species. Pore-mouth Brønsted acid sites exhibit 31 P and 1 H NMR resonances and adsorption energies close to those reported for internal acid sites interacting with TMPO. The presence of an external tricoordinate Al-Lewis site interacting strongly with TMPO is suggested, resulting in 31 P resonances that overlap with the peaks usually ascribed to the interaction of TMPO with Brønsted sites.
Asunto(s)
Zeolitas , Zeolitas/química , Espectroscopía de Resonancia Magnética/métodos , Imagen por Resonancia Magnética , Ácidos/químicaRESUMEN
While the use of nanozeolites for cancer treatment holds a great promise, it also requires a better understanding of the interaction between the zeolite nanoparticles and cancer cells and notably their internalization and biodistribution. It is particularly important in situation of hypoxia, a very common situations in aggressive cancers, which may change the energetic processes required for cellular uptake. Herein, we studied, in vitro, the kinetics of the internalization process and the intracellular localization of nanosized zeolite X (FAU-X) into glioblastoma cells. In normoxic conditions, scanning electron microscopy (SEM) showed a rapid cell membrane adhesion of zeolite nanoparticles (< 5 min following application in the cell medium), occurring before an energy-dependent uptake which appeared between 1 h and 4 h. Additionally, transmission electron microscopy (TEM) and flow cytometry analyzes, confirmed that the zeolite nanoparticles accumulate over time into the cytoplasm and were mostly located into vesicles visible at least up to 6 days. Interestingly, the uptake of zeolite nanoparticles was found to be dependent on oxygen concentration, i.e. an increase in internalization in severe hypoxia (0.2 % of O2) was observed. No toxicity of zeolite FAU-X nanoparticles was detected after 24 h and 72 h. The results clearly showed that the nanosized zeolites crystals were rapidly internalized via energy-requiring mechanism by cancer cells and even more in the hypoxic conditions. Once the zeolite nanoparticles were internalized into cells, they appeared to be safe and stable and therefore, they are envisioned to be used as carrier of various compounds to target cancer cells.
Asunto(s)
Glioblastoma , Zeolitas , Humanos , Hipoxia , Oxígeno , Distribución Tisular , Zeolitas/química , Zeolitas/farmacologíaRESUMEN
Perovskite quantum dots (PQDs) have been widely studied due to the outstanding light emission properties including high quantum efficiency, narrow linewidths and electron transport properties. However, poor stability limits their implication in optical devices, especially working at ambient conditions in the presence of moisture that rapidly attenuate their performance. In this work, PQDs were loaded in nanosized EMT zeolite crystals synthesized from template-free precursor systems resulting in a composite EMT-CsPbBr3. We found and studied for the first time that, in the pores of the zeolites, a small amount of water molecules can promote the crystallization of perovskite nanocrystals. The energy and bond length of perovskite CsPbBr3 confined in the cages of EMT zeolite were calculated in the presence of water molecules, corresponding to the effect of humidity. Crucially, the pore structure of EMT molecular sieve provides an important research model. The great stability and reliability of the EMT-CsPbBr3 as humidity sensor is presented. The luminous intensity efficiency of the EMT-CsPbBr3 composite was maintained at nearly 90% after continuous usage for 6 months. Both the theoretical and experimental results show that a trace amount of water enhances the luminescence of perovskite stabilized in the hydrophilic EMT zeolite.
RESUMEN
The mesopores formation in zeolite crystals has long been considered to occur through the stochastic hydrolysis and removal of framework atoms. Here, we investigate the NH4 F etching of representative small, medium, and large pore zeolites and show that the zeolite dissolution behavior, therefore the mesopore formation probability, is dominated by zeolite architecture at both nano- and sub-nano scales. At the nano-scale, the hidden mosaics of zeolite structure predetermine the spatio-temporal dissolution of the framework, hence the size, shape, location, and orientation of the mesopores. At the sub-nano scale, the intrinsic micropore size and connectivity jointly determine the diffusivity of reactant and dissolved products. As a result, the dissolution propensity varies from removing small framework fragments to consuming nanodomains and up to full digestion of the outmost part of zeolite crystals. The new knowledge will lead to new understanding of zeolite dissolution behavior and new adapted strategies for tailoring hierarchical zeolites.
RESUMEN
The preparation of defect-free MFI crystals containing single-site framework Mo through a hydrothermal postsynthesis treatment is reported. The insertion of single Mo sites in the MFI zeolite samples with different crystal sizes of 100, 200, and 2000 nm presenting a diverse concentration of silanol groups is revealed. The nature of the silanols and their role in the incorporation of Mo into the zeolite structure are elucidated through an extensive spectroscopic characterization (29Si NMR, 1H NMR, 31P NMR, and IR) combined with X-ray diffraction and HRTEM. In addition, a DFT-based theoretical modeling of a large Si154O354H92 nanoparticle containing 600 atoms is carried out to understand the expansion of the unit cell volume measured by X-ray diffraction. An accurate quantification of the silanols in the MFI crystals with different particle sizes and the insertion of Mo in the zeolitic framework is reported for the first time. The results confirmed that the non-H-bonded silanols seem to be the gateway for the insertion of single Mo atoms in the zeolite structure. Such materials with single metal sites present high crystallinity and perfect structure, thus providing great stability in catalytic applications.
RESUMEN
Zeolites have been game-changing materials in oil refining and petrochemistry over the last 60 years and have the potential to play the same role in the emerging processes of the energy and environmental transition. Although zeolites are crystalline inorganic solids, their structures are not perfect and the presence of defect sites - mainly Brønsted acid sites and silanols - influences their thermal and chemical resistance as well as their performances in key areas such as catalysis, gas and liquid separations and ion-exchange. In this paper, we review the type of defects in zeolites and the characterization techniques used for their identification and quantification with the focus on diffraction, spectroscopic and modeling approaches. More specifically, throughout the review, we will focus on silanol (Si-OH) defects located within the micropore structure and/or on the external surface of zeolites. The main approaches applied to engineer and heal defects and their consequences on the properties and applications of zeolites in catalysis and separation processes are highlighted. Finally, the challenges and opportunities of silanol defect engineering in tuning the properties of zeolites to meet the requirements for specific applications are presented.
RESUMEN
A balance between catalytic activity and product selectivity remains a dilemma for the partial oxidation processes because the products are prone to be overoxidized. In this work, we report on the partial oxidation of benzyl alcohol using a modified catalyst consisting of nanosized Au-Pd particles (NPs) with tin oxide (SnOx) deposited on a mesoporous silica support. We found that the SnOx promotes the autogenous reduction of PdO to active Pd0 species on the Au-Pd NP catalyst (SnOx@AP-ox) before H2 reduction, which is due to the high oxophilicity of Sn. The presence of active Pd0 species and the enhancement of oxygen transfer by SnOx led to high catalytic activity. The benzaldehyde selectivity was enhanced with the increase of SnOx content on catalyst SnOx@AP-ox, which is ascribed to the modulated affinity of reactants and products on the catalyst surface through the redox switching of Sn species. After H2 reduction, SnOx was partially reduced and Au-Pd-Sn alloy was formed. The formation of Au-Pd-Sn alloy weakened both the catalytic synergy of Au-Pd alloy NPs and the adsorption of benzyl alcohol on the reduced catalyst, thus leading to low catalytic activity.
RESUMEN
Zeoliteâ Y and its ultra-stabilized hierarchical derivative (USY) are the most widely used zeolite-based heterogeneous catalysts in oil refining, petrochemisty, and other chemicals manufacturing. After almost 60â years of academic and industrial research, their resilience is unique as no other catalyst displaced them from key processes such as FCC and hydrocracking. The present study highlights the key difference leading to the exceptional catalytic performance of USY versus the parent zeoliteâ Y in a multi-technique study combining advanced spectroscopies (IR and solid-state NMR) and molecular modeling. The results highlight a hitherto unreported proton transfer involving inaccessible active sites in sodalite cages that contributes to the exceptional catalytic performance of USY.
RESUMEN
A clear understanding of the crystal formation pathways of zeolites remains one of the most challenging issues to date. Here we investigate the synthesis of nanosized chabazite (CHA) zeolites using organic template-free colloidal suspensions by varying the time of aging at room temperature and the time of hydrothermal treatment at 90 °C. The role of mixed alkali metal cations (Na+, K+, Cs+) on the formation of CHA in the colloidal suspensions was studied. Increasing the aging time of the precursor colloidal suspension from 4 to 17 days resulted in faster crystallization of CHA nanocrystals (3 h instead of 7 h at 90 °C) to afford significantly smaller particles (60 nm vs 600 nm). During the crystallization a considerable change in the content of inorganic cations in the recovered solid material was observed to coincide with the formation of the CHA nanocrystals. The Na+ cations were found to direct the formation of condensed and pre-shaped aluminosilicate particles in the colloidal precursor suspensions, while K+ cations facilitated the formation of secondary building units (SBUs) of the CHA type framework structure such as d6r and cha cages, and the Cs+ cations promoted the long-range crystalline order facilitating the crystallization of stable zeolite nanocrystals.
RESUMEN
Hierarchical zeolites are regarded as promising catalysts due to their well-developed porosity, increased accessible surface area, and minimal diffusion constraints. Thus far, the focus has been on the creation of mesopores in zeolites, however, little is known about a microporosity upgrading and its effect on the diffusion and catalytic performance. Here the authors show that the "birth" of mesopore formation in faujasite (FAU) type zeolite starts by removing framework T atoms from the sodalite (SOD) cages followed by propagation throughout the crystals. This is evidenced by following the diffusion of xenon (Xe) in the mesoporous FAU zeolite prepared by unbiased leaching with NH4 F in comparison to the pristine FAU zeolite. A new diffusion pathway for the Xe in the mesoporous zeolite is proposed. Xenon first penetrates through the opened SOD cages and then diffuses to supercages of the mesoporous zeolite. Density functional theory (DFT) calculations indicate that Xe diffusion between SOD cage and supercage occurs only in hierarchical FAU structure with defect-contained six-member-ring separating these two types of cages. The catalytic performance of the mesoporous FAU zeolite further indicates that the upgraded microporosity facilitates the intracrystalline molecular traffic and increases the catalytic performance.