Comparison between Two Methods of Skeletal Growth Evaluation: Cervical Vertebrae Maturations and Middle Phalanx Maturation.

Aim: Growth measurement has always been essential to identify the best time to employ orthopedic or orthodontic appliances. Optimal timing for orthodontic treatment is strictly linked to the identification of periods of craniofacial growth when treatment is more effective.The aim of this study was to compare two different methods, middle phalanx maturation (MPM) and cervical vertebrae maturation (CVM), used to evaluate the stage of facial growth. Materials and methods: The research data was collected from July 2018 to April 2019 at the Dental Clinic of the San Gerardo Hospital in Monza. The study included a sample of 98 patients-46 males and 52 females. For each patient, a latero-lateral teleradiography of the skull and an X-ray on the middle finger of the right hand were obtained.The statistical analysis of the comparison of the stages of skeletal maturation obtained by the MPM and CVM methods was performed using the correlation coefficient for ranks of Spearman. Results: A descriptive statistical analysis of the entire sample of 98 patients was performed (mean age of 12.2 years and median of 12.2 years). The average age of females in every single stage of MPM was significantly lower than the average age of males. Of the total sample, 87 patients (88.8%) showed complete agreement between the two methods. Conclusion: The results obtained from the statistical analysis of this study allowed us to confirm a satisfactory agreement between the two methods.The intermediate phalanx method is a valid and alternative indicator to CVM for the identification of the puberty growth peak. We can, therefore, consider the MPM method a valid indicator of skeletal maturity. How to cite this article: Mirabelli L, Bianco E, Pigato G, et al. Comparison between Two Methods of Skeletal Growth Evaluation: Cervical Vertebrae Maturations and Middle Phalanx Maturation. Int J Clin Pediatr Dent 2023;16(2):327-332.

Immediate Autotransplantation of Molars with Closed Apex.

AIM: The aim of this study was to evaluate clinical features that might be related to success rates of autotransplantation of molars with complete root formation. MATERIALS AND METHODS: A group of 60 patients with completely formed third molars autotransplanted to a different molar socket was followed for a medium period of 5 years and 5 months. Extreme care was used in order to preserve the vitality of the periodontal ligament cells. The same technique was applied for all teeth despite different anatomies. Descriptive statistics was performed. The association of the various factors with failures was assessed by using the Fisher's exact test and a p-value of 0.05 was considered as significance threshold. RESULTS: Autotransplantation was found to be a reliable method to replace extracted molar teeth with closed apices. The two major factors that positively influenced the outcomes were fixation with splint and a periodontal probing pocket depth less than 4 mm after the initial healing period. The technique resulted in a suitable well-conserved socket and donor tooth, after the extraction. CONCLUSION: An accurate case evaluation was critically important in order to identify the risks prior to surgery and to select the right patients for this procedure. Autotransplantation of third molar teeth is a feasible approach to replace compromised mature molars. Proper stabilization of the transplanted tooth is strategical for the success of this procedure. A conservative approach to unerupted wisdom teeth is also recommended. CLINICAL SIGNIFICANCE: Dental implants and fixed prostheses have been utilized to replace missing teeth, and orthodontic space closure can be sometimes an effective treatment option. Tooth autotransplantation can be a reliable and less invasive clinical alternative when an appropriate donor site is available.

Assessment of Electromyographic Changes in a Patient with Masseter Hypertrophy and Muscle Pain after Botulinum Injections: A Case Report and 5 Months Follow-up.

AIM: To determine if botulinum injections in masseters could be an option to avoid surgery and prolonged treatment with occlusal splints and/or drugs to care for both painful bruxism and cosmetic improvement in a patient with a square jaw, bruxism, and orofacial pain. BACKGROUND: Masseter muscle hypertrophy (MMH) is a benign, unilateral, or bilateral, painless enlargement in the lower face. It presents as a symmetrical or asymmetrical increase in the masseter muscle. Masseter muscle hypertrophy (MMH) sometimes can be related to bruxism symptoms like muscle and/or temporomandibular joint (TMJ) pain. CASE DESCRIPTION: A 38-year-old woman complained of bilateral pain at palpation in the masseter body. She also complained about esthetics because of the prominent masseter muscle in the face and square face shape. A diagnosis of bruxism-related myalgia was performed, and treatment with botulinum injections into the masseter muscles was opted for. An oral electromyography was performed to detect the electrical muscular activity of masseter muscles over time. CONCLUSION: After a drastic reduction in the mean electrical activity immediately after the botulinum injections, a progressive increase in strength over time was noted, testifying about the decrease in the effect of botulinum over time. The pain disappeared for 5 months after the injections of botulinum. The reduction of the masseter muscle mass led to a softening of the face shape. CLINICAL SIGNIFICANCE: This case report shows that treatment with botulinum can lead, in the short term, to a reduction in orofacial pain due to a decrease in muscle electrical activity.

Vertical Bone Augmentation with GBR Pocket Technique: Surgical Procedure and Preliminary Results.

AIM: Nowadays, guided bone regeneration (GBR) is a predictable technique in both vertical and horizontal bone defects treatment. GBR Pocket Technique is an original surgical approach adopted in order to reduce the invasiveness of traditional procedures. The aim of this work is to describe the surgical procedure of GBR Pocket Technique in vertical bone augmentation and to compare the clinical outcomes of this technique with the results reported in literature of vertical bone augmentation and crestal bone remodeling achieved after 1 year after implants insertion. MATERIALS AND METHODS: Twenty-eight patients were recruited for this study and received 28 GBR procedures in the posterior region due to vertical and horizontal defects. A 50/50 mixture of autologous bone component and heterologous bone of equine origin was then made with the use of a bone scraper tunnel with internal reservoir. A PTFE-d membrane with titanium reinforcement was then fixed to the residual bone structure with screws in order to maintain the graft in place. Radiographic checks were made before graft procedures and implants insertion, then 6 months later and 1 year after implants placement. RESULTS: The average bone augmentation after surgery seems to be aligned, or even better, than the average reported in literature with alternative surgical approach; in addition, the mean crestal remodeling after 1 year and the rate of complications are aligned with other previous surgical techniques with a vertical bone augmentation of 8.78 mm ± SD 2.39 and a bone remodeling after 1 year of 0.59 mm ± SD 0.29. CONCLUSIONS: The advantages of this technique are preservation of blood circulation and consequently risk of flap necrosis, dehiscence, and graft exposure. This technique also reduces mucosal healing times even if it takes longer surgical time. CLINICAL SIGNIFICANCE: GBR Pocket Technique is the use of a minimal-invasive surgical wound to reduce patient morbidity and compliance.

Evaluation of Surgical Options for Supernumerary Teeth in the Anterior Maxilla.

AIM: The purpose of this study was to evaluate the surgical options for supernumerary teeth (SNT) in the premaxillary region of children. MATERIALS AND METHODS: A total of 69 patients with 82 partially or completely formed SNT in the anterior maxillary region were identified over a 3-year period. All selected patients were assessed for the number, location, and family history of SNT, damage to adjacent roots, and associated symptoms. The surgical approaches used for removal were recorded. Postoperative clinical sequelae (loss of vitality, periodontal problems, pain, bleeding, and enanthema) were evaluated. RESULTS: A total of 43, 30, and 9 SNT were extracted with palatal, buccal, and bicortical approaches respectively. Peri-odontal and vitality assessments revealed no problems in adjacent teeth at 6 months after surgery. Postoperative pain was within acceptable levels in all patients and subsided within 3 to 7 days. Mild postoperative bleeding occurred in eight patients. Enanthema subsided within 10 days in all patients. CONCLUSION: Our results suggest that early diagnosis and appropriate surgical treatment of SNT are important to decrease the risk of clinical complications.How to cite this article: Maddalone M, Rota E, Amosso E, Porcaro G, Mirabelli L. Evaluation of Surgical Options for Supernumerary Teeth in the Anterior Maxilla. Int J Clin Pediatr Dent 2018;11(4):294-298.

Long-term stability of autologous bone graft of intraoral origin after lateral sinus floor elevation with simultaneous implant placement.

BACKGROUND: Lateral approach to maxillary sinus floor elevation (LSFE) with autologous bone grafts and simultaneous implant insertion is a widespread technique for prosthetic rehabilitation of the atrophic maxilla. PURPOSE: To analyze implant survival and autologous bone graft resorption after LSFE, in patients with at least 5 years follow-up. MATERIALS AND METHODS: Thirty-three patients (mean age 56 years, range 46-68 years) who had undergone LSFE with intraoral autologous bone graft from mandibular ramus and simultaneous implant insertion were included. A minimum of 5 years of follow-up was required. The total peri-implant bone height was measured at mesial and distal aspects of the implants immediately after surgery (T0) and after a period ranging from 5 to 11.5 years after surgery (mean 7.65 ± 1.80 years) (T1) on digital panoramic and periapical radiographs. Wilcoxon matched-pairs signed rank test was used to compare bone graft height at T0 and T1. The influence of patient-, surgery-, and implant-related factors on the outcomes was investigated. RESULTS: Of the 58 implants placed, no one was lost. All prostheses were in function, and no biological or mechanical complications occurred. The residual ridge height at the involved sites averaged 6.48 ± 1.72 mm. The mean bone height at grafted regions was 12.05 ± 2.47 mm at T0 and 12.13 ± 2.39 mm at T1 (not statistically significant). Marginal bone level change at T1 averaged -1.22 ± 1.60 mm. None of the evaluated factors significantly affected the results. CONCLUSION: Autologous bone grafts from intraoral donor sites display excellent volume stability over time that may contribute to optimal outcomes of the procedure.

Clinical Evaluation of Bond Failures and Survival of Mandibular Canine-to-canine Bonded Retainers during a 12-year Time Span.

AIM: The aim of this study was to assess the effectiveness of the 3-3 mandibular lingual stainless steel retainer to prevent a relapse of orthodontic treatment during the 12-year time span of the survey. MATERIALS AND METHODS: Fifty patients with canine-to-canine bonded retainers (placed at least 10 years earlier) were recalled. All patients had been followed up annually during this period. Patients were screened for stability of the retainer and for the condition of hard and soft oral tissues. RESULTS: None of the patients reported a complete loss of the retainer; 14 patients reported single element partial losses and 13 reported multiple losses. Most partial failures were not perceived by patients, but noted by the orthodontist during the control visit. There was no notable variation of the gingival index occurring in these patients. In two cases patients had caries in the six teeth bonded with the retainer, but never on the lingual side; only in three teeth areas of decalcification in the proximity of bonded sites were reported. All patients showed good compliance with this kind of retention. CONCLUSION: The composite adhesive technique allowed a reliable positioning system for directly bonded retainers and did not influence the occurrence of carious lesions or demin-eralized spots on fixed teeth. Full teeth fixation offered the possibility of stabilizing the irregularity index highlighted in various studies without increasing any side effects on gums and hard tissues.How to cite this article: Maddalone M, Rota E, Mirabelli L, Venino PM, Porcaro G. Clinical Evaluation of Bond Failures and Survival of Mandibular Canine-to-canine Bonded Retainers during a 12-year Time Span. Int J Clin Pediatr Dent 2017;10(4):330-334.

Osteoradionecrosis of the Posterior Maxilla: A New Approach Combining Erbium: Yttrium Aluminium Garnet Laser and Bichat Bulla Flap.

Osteoradionecrosis (ORN) of the jaw is a complication of radiation therapy for head and neck cancers. We report a case of ORN of the posterior maxilla treated with Er: YAG laser and a pedicled buccal fat pad (bichat bulla adipose) flap. A 69-year-old man presented complaining of pain on left maxilla. He had received high-dose radiotherapy (90 Gy) for squamous cell carcinoma of the left soft palate 2 years earlier. Clinical and radiographic examinations revealed ORN of the left maxillary molar region and maxillary sinusitis. Daily home care consisted of 0.9% saline irrigation and 0.8% H2O2 gel application. Sequestrectomy and tooth extraction were followed by debridement with Er: YAG laser and repair with a pedicled buccal fat pad flap. Complete resolution of ORN and maxillary sinusitis was established one year postsurgically. The excellent clinical outcome suggests that Er: YAG laser debridement and pedicled buccal fat pad flap are a viable option to treat ORN of the posterior maxilla.