The occurrence and distribution of microplastic contamination in Qara-sou river, Iran: incidence, quantification, and qualification.

In the current study to investigate the characte - rization of Microplastic - released into the Qara-Sou river, Kermanshah, Iran, 12 sampling sites were surveyed along a 100 km stretch of the river. The maximum and minimum numbers of MPs were about 10,000 and 45,000 items per m3. The average concentration of MPs in the Qara-sou river was 23,666 ± 12147 items per m3. The dominant size and shape of MPs ranged from 0.025 to 1 mm (~44%) and fiber shapes (~78%). In addition, SEM-EDS analyses confirmed the presence of carbon-dominant peaks with O, Ca, Fe, Al, and Si. FTIR spectra have identified some MPs in the PVC, PU, PS, PE, and nylon polymer categories. A high level of MPs was discharged into the Qara-sou river, which should be attracting the attention of the community and decision-makers to reduce damage to the environment and human health.

Estimating human health risks associated with heavy metal exposure from bottled water using Monte Carlo simulation.

Water is the most important non-organic compound for living cells, and the life of all living organisms depends on it. Water is not found purely in nature, but it always contains some solutes, suspended matters and soluble gases. In this study, 11 bottled water brands (500 mL) were sampled across the Kashan city market to determine the concentration of selected heavy metals (Cr, Cd, Pb, Ni and As) and evaluated their potential risks following consumption. The concentration range of Cr, Cd, Pb, Ni and As were 5-34 µg/L, 1.5-7 µg/L, 1-7 µg/L, 2-29 µg/L,

Examining of Heavy Metal Concentrations in Hookah Smokers.

Hookah smoking has been spreading around the world, especially among young adults. The current study aimed to investigate the concentration of heavy metals and elements and clinical symptoms in hookah users in comparison with non-users. To the best of our knowledge, the present study represents the first scientific contribution indicating levels of several heavy metals and elements in urine and blood in hookah users and non-users as well as evaluating clinical symptoms. This research was implemented in Iran among 100 males divided into two groups (50/group): control and hookah users. Heavy metal contamination (lead, cadmium, arsenic, thallium, zinc, and copper) in blood and urine samples was assayed by graphite furnace atomic absorption spectrometry (GFAAS). Duration of hookah use was 7.06 ± 4.57 years. The mean ± SD of lead, arsenic, and thallium concentrations was 3.77 ± 2.22, 8.50 ± 4.34, and 4.22 ± 2.69 µg/L. The mean levels of blood for lead, arsenic, and urinary thallium in hookah users are significantly higher than the control group (p < 0.05). The most frequent clinical symptoms in hookah smokers were constipation and fatigue. Findings from this study might guide the development of policies to regulate hookah smoking and prevent adverse health effects associated with hookah smoking.

A comprehensive review on human health effects of chromium: insights on induced toxicity.

The growing use of heavy metals in most industrial activities has led to it being considered as the most important environmental pollutant that may cause harm and toxicity to animals and humans. Chromium has been found in the environment in different oxidation states such as Cr0, Cr(III), and Cr(VI) and is released from a variety of anthropogenic and natural activities. At among, trivalent and hexavalent chromium are the most stable forms. Considerably, Cr(VI) is frequently more toxic than Cr(III) because of its particular solubility and high mobility. Chronic exposure and bioaccumulation of chromium, as a heavy metal, can cause toxicity and numerous pathophysiological defects, including allergic reactions, anemia, burns, and sores especially in the stomach and small intestine, damage to sperm along with the male reproductive system, and affect various biological systems. Chromium pollution can have severe consequences for water and the soil environment. This article reviews the toxicological effects of Cr(VI) and Cr(III) and their mechanisms of toxicity and carcinogenicity.

Determination of potentially toxic metals in depilatory products in the Iranian markets: human health risk assessment.

This study aimed to investigate the concentrations of heavy metals, including lead (Pb), cadmium (Cd), chromium (Cr), zinc (Zn), cobalt (Co), and arsenic metalloid (As), to assess their health risks in the popular depilatory products of the Iranian markets. Twenty-one samples of 7 popular brands of depilatory products, inclusive of cream and powder, were examined. Selected elements were measured by inductively coupled plasma optical emission spectrometry (ICP-OES) using the appropriate procedure for acid digestion and the measurement of heavy metal contents. The differences in heavy metal concentrations were investigated according to the type of product, brand, country of production, and product price using t test and one-way analysis of variance and post hoc Tukey test. Finally, carcinogenic and non-carcinogenic risk assessments were calculated for the studied elements. The results showed that Pb (5.46±2.30 mg/kg) and Co (0.16±0.69 mg/kg) had the highest and lowest concentrations in these products, respectively. In general, the concentration of heavy metals in depilatory creams was less than the concentration of elements in depilatory powders and less than the maximum allowable limits as defined by the Institute of Standards and Industrial Research of Iran (ISIRI). There was a direct and significant relationship between the concentration of heavy metals in depilatory powders and the product's price. Moreover, the amount of As in one of the brands of depilatory powder was determined to exceed the standard value (2 mg/kg). Also, hazard index (HI) and lifetime cancer risk (LCR) were below 1 and 10-6, respectively, which indicated that this mentioned heavy metal had no probable non-carcinogenic and carcinogenic risks for consumers. According to this study, it was evident that the chances of cancer and non-cancer risk using depilatory products were unlikely, but continuous use can be harmful due to the excessive accumulation of these heavy metals.

Correction to: Systematic review and metal analysis on three important fungal group (dermatophytes, yeasts and saprophytes) isolated from Iranian swimming pools.

[This corrects the article DOI: 10.1007/s40201-021-00670-5.].

Systematic review and metal analysis on three important fungal group (dermatophytes, yeasts and saprophytes) isolated from Iranian swimming pools.

The swimming pool particularly has been considered in tropical area and warm seasons in order to recreational actives and also different exercises. Therefore, poor management and unhealthy behavior of swimmers could be a cause of fungal diseases transmission among swimmers. The present study has addressed the literatures on the topic of fungal contamination of indoor/outdoor swimming pools in Iran. Based on the literature review, most common fungal contaminations were on the list of sporophytes fungus. The majority of the reported and isolated fungal were Aspergillus spp.(50 %), Rhizopus spp., Cladosporium spp.kand Penicillium spp. In addition, E. flucosom and T. mentagrophytes were the most abundant dermatophytes. Meta-analyzing of the results showed that dermatophytes, yeasts and saprophytes can be found in the swimming pool samples with a percent of 2.78 %, 14.29 and 73.73 %, respectively. High heterogeneity rate between studies was found for all types of fungal categories by I2, and a p-value < 0.0001. The results of outdoor pools (hot spring pools) showed Aspergillus spp. as a predominating species and other types such as A. fumigatusm, A.feltus and A.niger with penicillium spp. as the most abundant funguses in the next order pool type. It can be concluded that the swimming pools (both indoor and outdoor) are considerable reservoir of human diseases caused by fungi, especially a potential source of dermatophyte infection.

Health risk assessment and source apportionment of heavy metals in atmospheric dustfall in a city of Khuzestan Province, Iran.

The heavy metals in the atmospheric particulate matters are now considered a risk for humans and the environment. The purpose of this study was to assess the concentration, source apportionment, and health risk of heavy metals in atmospheric dustfall in Dezful City of Khuzestan Province, Iran. The dustfall samples were collected from five locations every month for one year (2018-2019). The heavy metals ( lead (Pb), cadmium (Cd), chromium (Cr), iron (Fe), and nickel (Ni)) contents of dustfall samples were determined by ICP-OES. The monthly mean of dustfall for five sampling locations was 22.81 ± 21.9 ton.km- 2.month- 1. The mean concentrations of the examined heavy metals were assessed as Fe > Cr > Ni > Pb > Cd. The highest enrichment level belonged to Cd (59.35 ± 128.18) and all heavy metals had enrichment levels beyond 10. The HI (Hazard Index) values were less than one and there was no significant non-carcinogenic risk due to these heavy metals. For children, Ni showed the most HI with a value of 0.205. The calculations demonstrate that the obtained values of cancer risk in both groups are less than the acceptable range (10- 6 to 10- 4). The PMF (Positive Matrix Factorization) results indicated four main sources of pollutants, namely, vehicular exhaust, industrial, road dust, and nonferrous smelting. The results of the study revealed that industrial activities and traffic play crucial roles in increasing the heavy metals contamination of dustfall in Dezful City.

Contamination of obsterics and gynecology hospital air by bacterial and fungal aerosols associated with nosocomial infections.

Bacterial and fungal bioaerosols are a global concern due to nosocomial infections, especially in developing countries. Our study aimed to detect fungal and bacterial bioaerosols in different wards of an obstetrics and gynecology hospital air samples. 240 bioaerosol samples were collected by performing impaction method from different wards of a hospital in the central part of Iran, during two seasons. Fungi genera and bacteria species are recognized by cultivation. Concentrations of bacteria and fungi were ranged from 44 to 75 CFU/m3 and 8 to 22 CFU/m3, respectively. Labor Delivery and Recovery (LDR) and Emergency room had first and second most contaminated air among all the hospital wards. No significant difference between microbial load of wards which used natural ventilation and heating, ventilating, and air conditioning (HVAC) system was observed. The microbial load was not affected significantly by temperature, working shift, and Inpatient Bed Occupancy Rate (IBOR). Fungal load related significantly with relative humidity. Staphylococcus aureus (detected in 48.3% of samples) and Penicillium (27%) were the most predominant isolated bacteria and fungi, respectively. The results revealed that the level of bacteria and fungi responsible for nosocomial infections in the air of this hospital is very low. Although levels of microbial contamination are relatively low, it is important to investigate the effect of bioaerosols on nosocomial infections, especially in neonates.

A wavelet-based random forest approach for indoor BTEX spatiotemporal modeling and health risk assessment.

This study reports on BTEX concentrations in one of the largest parking garages in Iran with a peak traffic flow reaching up to ~9300 vehicles in the last few days of the Nowruz holidays. Samples were obtained on different days of the week at three main locations in the Zaer Parking Garage. A novel wavelet-based random forest model (WRF) was trained to estimate BTEX concentrations by decomposing temperature, day of the week, sampling location, and relative humidity data with a maximal overlap discrete wavelet transform (MODWT) function and subsequently inputted into the WRF model. The results suggested that the WRF model can reasonably estimate BTEX trends and variations based on high R2 values of 0.96, 0.95, and 0.98 for training, validation, and test data subsets, respectively. The carcinogenic (LTCR) and non-carcinogenic health risk (HI) assessment results indicated a definite carcinogenic risk of benzene (LTCR = 2.22 × 10-4) and high non-carcinogenic risk (HI = 4.51) of BTEX emissions. The results of this study point to the importance of BTEX accumulation in poorly ventilated areas and the utility of machine learning in forecasting air pollution in diverse airsheds such as parking garages.

Comparative efficacy of hospital disinfectants against nosocomial infection pathogens.

BACKGROUND: Due to the increasing rate of hospital-acquired infections, it is essential to select appropriate disinfectant agents. In this study, the efficacy of hospital disinfectants against nosocomial infection pathogens was compared. METHODS: High level disinfectants (Steranios 2%, Deconex HLDPA, and Microzed Quatenol) were tested for their antibacterial effects by determining their minimum inhibitory (MIC) and minimum bactericidal concentrations (MBC) against Enterococcus faecalis ATCC 29212 and Burkholderia cepacia ATCC 10673. RESULTS: E. faecalis, as gram-positive bacterium, was more susceptible to high level disinfectants compared to gram-negative B.cepacia. The MIC = MBC values of 2% Steranios, Deconex HLDPA and Microzed Quatenol against E. faecalis and B.cepacia were 0.31, 9.77, 2.2 mg/L and 9.8, 78.13, 70.31 mg/L, respectively. CONCLUSIONS: According to the findings of this study, the most effective disinfectants against both E. faecalis and B.cepacia were Steranios 2%, Microzed Quatenol, and Deconex HLDPA in order. Considering the importance of these bacterial strains in healthcare-associated infections, the use of these effective disinfectants is recommended in the hospitals.

Extraction and determination of heavy metals in soil and vegetables irrigated with treated municipal wastewater using new mode of dispersive liquid-liquid microextraction based on the solidified deep eutectic solvent followed by GFAAS.

BACKGROUND: In this research, a new extraction method based on dispersive liquid-liquid microextraction and the solidification of deep eutectic solvent has been developed for the determination of heavy metals in soil and vegetables prior to their analysis by graphite furnace atomic absorption spectrometry (GFAAS). In this method, a green solvent consisting of 1-decyl-3-methylimidazolium chloride and 1-undecanol was used as an extraction solvent, yielding the advantages of material stability, low density and a suitable freezing point near room temperature. RESULTS: Under optimal conditions, enrichment factors are in the range of 114-172. The calibration graphs are linear in the range of 0.02-200 µg kg-1 and limits of detection are in the range of 0.01-0.03 µg kg-1 . Repeatability and reproducibility of the method based on seven replicate measurements of 0.80 µg kg-1 of Hg and 0.20 µg kg-1 of Pb and Cd in analyzed samples were in the range of 2.3-4.1% and 3.7-6.6%, respectively. CONCLUSION: A new deep eutectic solvent consists of two parts: 1-decyl-3-methylimidazolium chloride and 1-undecanol in a molar ratio of 1:2. The accuracy of the proposed procedure was also assessed by determining the concentration of the studied metal ions in a polluted farmland soil standard reference material. © 2018 Society of Chemical Industry.

Data on using macro invertebrates to investigate the biological integrity of permanent streams located in a semi-arid region.

The aquatic ecosystems are continuously endangered due to variety of hazardous chemicals containing different toxic agents which can be emitted from anthropogenic sources. Besides the increasing of human population, various kinds of contaminants enter into the surface water resources. The aim of the present study was to investigate the abundance and diversity of macro invertebrates in two permanent streams located in the northern part of Tehran. The biological integrity of the streams was determined by manual sampling approach at five points. The distances between the sampling points were at least 2 km. The bio indicator organisms, organic pollution, and dissolved oxygen were measured. The different types of benthic invertebrates such as riffle beetle, midge and caddish fly larvae, dragon fly, may fly and stone fly nymph, riffle beetle adult, pyralid caterpillar, leech, and pouch snail were identified. It can be concluded that, the identified benthic macro invertebrates can be served as appropriate biological indicator in the studied area.

Speciation of As(ΙΙΙ)/As(V) and Total Inorganic Arsenic in Biological Fluids Using New Mode of Liquid-Phase Microextraction and Electrothermal Atomic Absorption Spectrometry.

In this paper, a new extraction method based on countercurrent liquid-liquid microextraction (CLLME) has been developed for the extraction and preconcentration of inorganic arsenic (iAs) in plasma and urine samples prior to their analysis by electrothermal atomic absorption spectrometry (ETAAS). In this method, firstly, 5 ml of water is added to the extraction vessel. Then 30.0 µl of the extracting solvent is added to it in order for the extracting solvent to be placed in the narrow-necked vessel. In total, 10 ml of a standard solution or a pretreated real sample is added to the sample container and it is connected to the extraction vessel via a connector. While opening the embedded valve at the bottom of the sample container and the one in the extraction vessel, the sample solution flows into the extracting solvent with the same flow rate, leading to the successful extraction of metal ligand into the extracting organic solvent. Under the optimum conditions, calibration curves are linear in the range of 0.1-50 µg l-1, and limit of detections (LODs) are in the range of 0.03-0.05 µg l-1. The enhancement factor and enrichment factor were in the range of 220-240 and 198-212, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 5.0 µg l-1 of arsenic were in the range of 2.3-3.5% and 4.0-5.7%, respectively. The applicability of the proposed CLLME and ETAAS methods was demonstrated by analyzing the iAs in spiked urine and plasma samples. The obtained recoveries of the arsenic in the range of 92-107% indicated the excellent capability of the developed method for speciation of arsenic from plasma and urine samples. Graphical Abstract ᅟ.

Biomonitoring of tobacco smoke exposure and self-reported smoking status among general population of Tehran, Iran.

The present study aimed to find a correlation between the self-reported smoking status of the residents of Tehran, Iran, and the urine cotinine as a biomarker of exposure to tobacco smoke. The self-reported data was collected from 222 participants who were living in the urban area of Tehran. The urine samples of participants were collected for cotinine analysis. Urine cotinine was measured by an enzymatic immunoassay technique. Tobacco smoking was reported by 76 (34.23 %) participants as the self-reported data, and the number of males in this report was higher than of females (p < 0.001). By adding the number of the self-reported non-smokers with cotinine levels above the cutoff value of >100 ng/ml to self-reported smokers, the smoking prevalence increased from 34.23 % (95 % CI 28.01-40.88 %) to 36.48 % (95 % CI 30.14-43.19 %). Using the cutoff value, sensitivity and specificity of the self-reported smoking status were respectively 90.12 % (95 % CI 81.46-95.64 %) and 98 % (95 % CI 93.91-99.55 %). The levels of agreement between self-reported tobacco smoking and urinary cotinine concentrations was 95.1 % (k = 0.89, p < 0.001, 95 % CI = 0.81-0.95). Based on the results, self-reported smoking can be a valid marker for assessing the tobacco exposure, and it can be of use in large epidemiological studies.