Critical Shoulder Angle in Patients With Cuff Tears.

OBJECTIVE: The pathogenesis of rotator cuff tears (RCTs) is multifactorial. Critical shoulder angle (CSA), which represents the lateral extension of the acromion over the cuff, has been proposed as an extrinsic risk factor. The aim of the present systematic review and meta-analysis was to analyze the available literature regarding the correlation between RCT and CSA. METHODS: A review was carried out in accordance with the "Preferred Reporting Items for Systematic reviews and Meta-Analyses" guidelines on July 17, 2023, using the following databases: PubMed, Ovid, and Cochrane Reviews. The following keywords were used: "critical shoulder angle," "rotator cuff tears," and "rotator cuff lesions." The methodological quality of the studies was assessed with the MINORS SCORE. RESULTS: Twenty-eight studies were included. The average CSA among the 2110 patients with full-thickness RCT was 36.7 degrees, whereas the same value among the 2972 controls was 33.1 degrees. The average CSA in the 348 patients with partial-thickness RCT was 34.6 degrees, whereas it was 38.1 degrees in the 132 patients with massive RCT. The average MINORS score was 15.6. CONCLUSIONS: CSA values were significantly higher in patients with RCT compared with the asymptomatic population. In addition, it appears that CSA values increase with the severity of rotator cuff involvement.

Information videos posted on Instagram by orthopaedics and sports traumatology surgeons mostly explain surgical technique, and the least mentioned topics are injury prevention and complications.

PURPOSE: Social media has become the new information acquisition platform for all content producers. In the current literature, there are no studies examining the content quality and the strengths and weaknesses of videos on Instagram that explain anterior cruciate ligament (ACL) injuries, which is the most discussed topic of sports surgery. The aim of this study was to evaluate the quality, strengths and weaknesses of information pertaining to ACL surgery that is disseminated on Instagram. METHOD: An Instagram search was conducted from 30 May 2023 to 30 January 2024. The search encompassed six languages (English, Spanish, German, French, Italian and Turkish) and was performed by six different observers. The investigation focused on eight subheadings derived from current literature on the ACL. These subheadings were addressed in Instagram videos, covering ACL biology or biomechanics, injury mechanism, injury prevention, injury evaluation, surgical technique, injury or surgery complications, injury rehabilitation process and return to sport or work. RESULT: The content was assessed of 127 videos from 127 Instagram accounts, spanning six different languages. Across the review of eight subheadings, the average number covered for the entire group was 3 (range, 0-8). Further analysis revealed that surgical technique was the most frequently mentioned subheading for the whole group (68.5%), followed by injury evaluation (54.3%). Prevention (10.2%) and complications (19.6%) were the least mentioned subheadings. The number of followers showed a correlation with video content quality. CONCLUSION: Although the video quality scores were found to be moderate, the content often focused on surgery and evaluation subheadings. The prevalence of incomplete information underscores the importance of developing strategies to ensure more comprehensive and accurate dissemination of medical knowledge. LEVEL OF EVIDENCE: Level V.

The effect of subscapularis repair in reverse total shoulder arthroplasty depends on the design of the implant: a comparative study with a minimum 2-year follow-up.

INTRODUCTION: The role of the subscapularis (Ssc) tendon does not yet have a well-defined role in RSA. The purpose of the present study was to evaluate if the repair of the Ssc in RSA improves overall clinical and radiographic results and if it has the same results using a medialized design humeral stem compared to a lateralized design. METHODS: Eighty-four consecutive patients undergoing RSA were retrospectively analyzed. Nine patients were lost at FU. Two implants with similar glenosphere design and different stem design (medialized and lateralized) were used. The Ssc was repaired in case of good quality of the fibers and reducibility without tension intraoperatively. Patients were divided into four groups for data analysis depending on whether they had received a medialized or lateralized design and Ssc repair or not. Patients were reviewed at an average follow-up of 40.8 ± 13.1 months. Clinical outcome measures included Active range of motion (ROM), strength, visual analog scale (VAS), Constant-Murley score (CMS), and the American Shoulder and Elbow Surgeons score (ASES). Radiographic evaluation at final follow-up was performed to assess scapular notching, stress shielding, and radiolucent lines. RESULTS: No statistically significant clinical differences (p > 0.05) emerged between Lat/Ssc+ and Lat/Ssc-. Conversely, the patients belonging to the Med/Ssc- group reported statistically worse (p < 0.05) results than the Med/Ssc + group in terms of VAS, ASES and CMS. Statistically worse (p < .05) results in the Med/Ssc- group than in the Med/Ssc + were found also in active ROM achieved in FE, ABD, ER1 and ER2, and in the strength obtained in FE, ABD and ER2. Scapular notching was reported in 3 shoulders (15.7%) in Lat/Ssc+ group and in 7 shoulders (50%) in Lat/Ssc- group, while it was reported in 4 shoulders (14.2%) in Med/Ssc + group and in 6 shoulders (42.8%) in Med/Ssc- group. Stress shielding was observed in 6 cases in Lat/Ssc+ group (31.6%), in 8 cases in Lat/Ssc- group (57.1%), in 3 cases (10.7%) in Med/Ssc + group and 4 cases in Med/Ssc- group (28.6%). CONCLUSIONS: Patients undergoing RSA show clinical improvements at mid-term follow-up with a low rate of complications, regardless of the use of a medialized or a lateralized humeral stem design. Ssc repair is associated with better functional outcomes in the cohort of medialized stem, while it did not yield significant differences in the cohort of lateralized stem. LEVEL OF EVIDENCE: Level III; Retrospective Cohort Comparison; Treatment Study.

Evaluation of the range of motion of scapulothoracic, acromioclavicular and sternoclavicular joints: State of the art.

The scapulothoracic, acromioclavicular and sternoclavicular joints play a fundamental role in the shoulder function. Shoulder complex kinematics have been studied with different methods using: goniometers, 2 static radiographs, 3D motion analyzers (invasive or noninvasive) and digital inclinometers. Goniometers have been used traditionally to assess scapular rotation in relation to the thorax. The intrinsic limit of multiple static two-dimensional shoulder radiographs is the attempt of describing in two what is occurring in three dimensions. Technology innovations have led to the development of the 3D shoulder complex kinematics analysis ETS (Electromagnetic tracking systems) using sensors (invasive bone-pin markers or noninvasive skin surface marker) stitched to the scapula/clavicula, thorax, and humerus. Despite being uncomfortable, invasive 3D motion cortical pins analyzers still represent the current gold standard for tracking shoulder complex kinematics. Therefore, access to three-dimensional biomechanical instrumentations for collecting kinematic data represents an active problem for many physicians. A precise, easy to use and low-cost non-invasive method able to draw and analyze the kinematics of the shoulder complex has not been developed yet. Further researches are necessary to design a new non-invasive method able to draw and analyze the kinematics of the scapula and the whole shoulder complex, precisely.

Short-Term Survivorship of 3D-Printed Titanium Metaphyseal Cones in Revision Total Knee Arthroplasty: A Systematic Review.

Background: Several studies have evaluated the outcomes of tantalum cones in revision knee arthroplasty with moderate-to-severe metaphyseal bone defects. However, recent innovations have led to the development of 3-D printed titanium cones to better adapt to host bone, there remains no consensus on their overall performance. Objective: We therefore performed a systematic review of the literature to examine short-term survivorship and complication rates of their usage in revision TKAs. Methods: A systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. A comprehensive search of PubMed, MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews was conducted for English articles using various combinations of keywords. Results: In all, 7 articles met the inclusion criteria. A total of 687 cones were implanted in 557 revision TKAs. The all-cause revision-free survivorship of the implants was 95.3% (26 revisions), and of the cones was 95.5% (31 cones revised) at mean 24 months follow-up. The cones revision-free survivorship from aseptic loosening was 99.7%. The overall complication rate was 19.7% with infection as the most common complications observed and the most frequent reason for revision with an incidence of 10.4% and 4.1%, respectively. Overall, functional outcomes improved as documented by postoperative knee scores. Conclusion: 3-D printed metal cones represent a reliable option in metaphyseal bone defects reconstruction that provides high fixation, good short-term survivorship, and complications rates in line with similar devices. In addition, they are associated with lower intraoperative complications, and higher survivorship from aseptic loosening.

Comparative study of 145° onlay curved stem versus 155° inlay straight stem reverse shoulder arthroplasty: clinical and radiographic results with a minimum 2-year follow-up.

BACKGROUND: Lateralized onlay reverse shoulder arthroplasty (RSA) is designed to ensure better clinical functional recovery and lower rate of complications compared with Grammont medialized inlay RSA. The purpose of the present study was to compare the clinical and radiographic outcomes between these 2 different designs. METHODS: Eighty-five consecutive patients who underwent RSA were retrospectively analyzed. Nine patients were lost to follow-up, 34 received a curved onlay with a 145° neck-shaft angle (Ascend Flex group), and 42 received a long straight inlay stem with a 155° neck-shaft angle (Delta Xtend group). Patients were reviewed at an average follow-up of 46.8 ± 13.2 months (Ascend Flex group) and 36 ± 10.8 months (Delta Xtend group). Clinical outcome measures included active range of motion, strength, visual analog scale, Constant-Murley score, and the American Shoulder and Elbow Surgeons score. Radiographic evaluation at the final follow-up was performed to assess scapular notching, stress shielding, acromial or scapular fractures, heterotopic ossification, and radiolucent lines or implant loosening. RESULTS: No differences emerged between the 2 groups in terms of visual analog scale, American Shoulder and Elbow Surgeons and Constant-Murley scores, pain, function, strength, mobility, active forward elevation, active internal rotation, active external rotation at 0° and 90° of abduction, abduction, forward elevation, and external rotation strength (P = n.s.). Statistically superior active abduction was observed in the Delta Xtend group (P = .0017). Scapular notching was observed in 12 shoulders (35.2%) in the Ascend Flex group (a grade 1) and in 10 shoulders (23.8%) in the Delta Xtend group (P = n.s.). No differences emerged between the 2 groups in terms of humeral or glenoid radiolucency (P = n.s.). Higher rate of humeral stress shielding rate was observed in the Ascend flex cohort (P = n.s.). CONCLUSIONS: No statistically significant difference emerged between the 145° onlay curved stem vs. the 155° inlay straight stem according to most of the evaluated parameters. Statistically superior active abduction was observed in the 155° group although it did not affect patients' satisfaction.

Survivorship and clinical outcomes of proximal femoral replacement in non-neoplastic primary and revision total hip arthroplasty: a systematic review.

BACKGROUND: Several studies have evaluated the survivorship and clinical outcomes of proximal femoral replacement (PFR) in complex primary and revision total hip arthroplasty with severe proximal femoral bone loss; however, there remains no consensus on the overall performance of this implant. We therefore performed a systematic review of the literature in order to examine survivorship and complication rates of PFR usage. METHODS: A systematic review of the literature according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines was performed. A comprehensive search of PubMed, MEDLINE, EMBASE, and the Cochrane Database of Systematic Reviews was conducted for English articles using various combinations of keywords. RESULTS: In all, 18 articles met the inclusion criteria. A total of 578 PFR were implanted. The all-cause reoperation-free survivorship was 76.6%. The overall complication rate was 27.2%. Dislocation was the most common complication observed and the most frequent reason for reoperation with an incidence of 12.8 and 7.6%, respectively. Infection after PFR had an incidence of 7.6% and a reoperation rate of 6.4%. The reoperation rate for aseptic loosening of the implant was 5.9%. Overall, patients had improved outcomes as documented by postoperative hip scores. CONCLUSION: PFR usage have a relatively high complication rate, however, it remains an efficacious treatment option in elderly patients with osteoporotic bone affected by severe proximal femoral bone loss. Modular designs have shown reduced dislocations rate and higher survivorship free from dislocation. However, PFR should only be used as salvage procedure when no other reconstruction options are available.

Newer generation straight humeral nails allow faster bone healing and better functional outcome at mid-term.

PURPOSE: Although proximal and diaphyseal humerus fractures are frequent, the optimal management remains controversial. Antegrade nailing prevents further damage to the soft tissues and to the vascularization, but it has been associated with postoperative shoulder pain and dysfunction. During the latest years a straight nail design was developed to minimize these problems. METHODS: A total of 243 patients who had undergone surgery for antegrade intramedullary humeral nailing between January 2013 and July 2018 in A. Gemelli Trauma Center were divided into two groups according to the nail design used: straight nail group (S-group) and curvilinear nail group (C-group). Clinical data were collected using assessment forms (SF12-v2, Quick-DASH, ASES and Constant-Murley). Radiographic bone healing was assessed with RUST score at 30, 90 and 180 days after surgery. RESULTS: The S-group was made up of 128 patients with a mean age of 59 ± 19 (range 18-97) and a mean follow-up of 46 ± 9 months. The C-group was made up of 115 patients with a mean age of 53 ± 16 (range 18-88) and a mean follow-up of 51 ± 8 months. The S-group had a mental component summary (MCS) score of 54.3 ± 7.7 and a physical component summary (PCS) score of 46 ± 10.2, the C-group had a MCS score of 50.9 ± 8.4 and a PCS score of 44.1 ± 7.4. Quick-DASH and ASES were respectively 18.8 ± 4.3 and 78.6 ± 8.2 in the S-group, 28.3 ± 11.6 and 72.1 ± 13.5 in the C-group with statistical significance. Constant-Murley score was 73.9 ± 9.1 in the S-group (76% of the contralateral healthy side) and 69.4 ± 10.4 in the C-group (73% of the contralateral healthy side). The radiographic union score in the S-group was 4.1 ± 0.3 at 30 days after surgery, 7 ± 0.8 at 90 days and 10 ± 1.2 at 180 days, while in the C-group it was 4.2 ± 0.4 at 30 days, 6.4 ± 0.7 at 90 days and 9 ± 0.9 at 180 days. CONCLUSION: Newer generation straight nails allow a faster bone healing and better functional outcome at mid-term follow up. Level of evidence III.

Is varus-valgus constraint a reliable option in complex primary total knee arthroplasty? A systematic review.

PURPOSE: Knee instability is considered one of the most frequent cause of failure after primary total knee arthroplasty (TKA). In order to address intraoperative instability, varus-valgus constrained knee implants (VVC) are increasingly utilized in primary TKA. Despite an increased risk of mechanical failure, short to mid-term results seem to be encouraging, but long-term results are still lacking. METHODS: A systematic review of prospective and retrospective studies that reported clinical outcomes of patients with VVC systems in primary TKAs between 1990 and 2020 was performed. RESULTS: In all, 28 articles met our inclusion criteria. A total of 2798 VVC implants were used in primary TKA. The all-cause revision-free survivorship was 95.2% at a mean follow-up of 7 years. Infection and aseptic loosening were the most common reasons for reoperation with an incidence of 1.8% and 1.7%, respectively. Overall complication rate was 9.6%, the most common complications were knee stiffness and infection with an incidence of 2.8% and 2.5%, respectively. CONCLUSIONS: VVC implants in primary TKA are associated with improved functional outcomes and good mid-term survivorship, comparable to lower level of constraint implants. Non-modular stemless seem to be reliable implants at mid-term follow-up. However, given the lack data coming from long-term studies, VVC implants should be used cautiously in primary TKA.

No differences between conservative and surgical management of acromioclavicular joint osteoarthritis: a scoping review.

PURPOSE: To conduct a scoping review to clarify the management of acromioclavicular joint osteoarthritis, as well as to identify any existing gaps in the current knowledge. METHODS: Studies were identified by electronic databases (Ovid, Pubmed) from their inception up to April 2nd, 2020. All studies reporting functional outcomes after conservative or surgical treatment of acromioclavicular joint osteoarthritis, either primary or secondary to trauma or distal clavicle osteolysis, were included. Following data were extracted: authors, year of publication, study design (prospective or retrospective), LOE, number of shoulders treated conservatively or surgically, patients' age, OA classification, type of conservative treatment, surgical approach, surgical technique, functional outcomes, complications, revisions, and length of follow-up. Descriptive statistics was used. Quality appraisal was assessed through the Cochrane risk of bias tool for LOE I/II studies, while the MINORS checklist was used for LOE III/IV studies. RESULTS: Nineteen studies were included for a total of 861 shoulders. Mean age of participants was 48.5 ± 7.4 years. Mean follow-up was 43.8 ± 29.9 months. Four studies reported functional results after conservative treatment, whereas 15 studies were focused on surgical management. No studies directly compared conservative and surgical treatment. Seven studies reported a surgical approach after failure of previous conservative treatment. All studies reported functional improvement and pain relief. Complication rate was low. Overall methodological quality of included studies was very low. CONCLUSION: Conservative and surgical treatments are both effective in acromioclavicular joint osteoarthritis management. However, available data did not allow to establish the superiority of one technique over another. LEVEL OF EVIDENCE: Level IV.

Anatomic reconstruction of the coracoclavicular and acromioclavicular ligaments with semitendinosus tendon graft for the treatment of chronic acromioclavicular joint dislocation provides good clinical and radiological results.

PURPOSE: To evaluate clinical and radiographic outcomes of anatomical reconstruction of the coracoclavicular and acromioclavicular ligaments with single-strand semitendinosus tendon graft for the treatment of chronic acromioclavicular joint dislocation. METHODS: Patients affected by chronic type III-V acromioclavicular joint dislocations were included. Exclusion criteria were: age under 18 years, concomitant rotator cuff tears, previous surgery to the same shoulder, degenerative changes of the glenohumeral joint, infections, neurologic diseases, patients with a previous history of ligament reconstruction procedures that had required harvesting of the semitendinosus tendon from the ipsilateral or contralateral knee. All patients underwent the same surgical technique and rehabilitation. Primary outcome was the normalized Constant score. Secondary outcomes were: DASH score, radiographic evaluation of loss of reduction and acromioclavicular joint osteoarthritis. RESULTS: Thirty patients with a mean age of 28.9 ± 8.3 years were included. Mean time to surgery was 12.8 ± 10 months. Mean follow-up was 28.1 ± 2.4 months (range: 24-32). Comparison between pre- and postoperative functional scores showed significant clinical improvement (p < 0.001). Time to surgery was independently associated with a poorer Constant score (p < 0.0001). On radiographs, 4 patients (13.3%) showed asymptomatic partial loss of reduction. CONCLUSION: Anatomic reconstruction of coracoclavicular and acromioclavicular ligaments using a semitendinosus tendon graft for the treatment of chronic acromioclavicular joint dislocation provided good clinical and radiological results at minimum 2-year follow-up. LEVEL OF EVIDENCE: Level III.

Anatomic reconstruction of the acromioclavicular joint provides the best functional outcomes in the treatment of chronic instability.

PURPOSE: To systematically review the outcomes of surgical treatments of chronic acromioclavicular joint dislocation. METHODS: Studies were identified by electronic databases (Ovid, PubMed). All studies reporting functional and radiological outcomes of surgical treatments of chronic acromioclavicular joint dislocations were included. Following data were extracted: authors and year, study design, level of evidence, number of patients, age, classification of acromioclavicular joint dislocation, time to surgery, surgical technique, follow-up, clinical and imaging outcomes, complications and failures. Descriptive statistics was used, when a data pooling was not possible. Comparable outcomes were pooled to generate summary outcomes reported as frequency-weighted values. Quality appraisal was assessed through the MINORS checklist. RESULTS: Fourty-four studies were included for a total of 1020 shoulders. Mean age of participants was 38 years. Mean follow-up was 32.9 months. Arthroscopic techniques showed better results than open approach (p < 0.0001). Synthetic reconstructions demonstrated better functional outcomes compared to internal fixation and biologic techniques (p < 0.0001). Among biologic techniques, combined coracoclavicular and acromioclavicular ligaments reconstruction showed better Constant (p = 0.0270) and ASES (p = 0.0113) scores compared to isolated coracoclavicular ligaments reconstruction; anatomic biologic non-augmented graft reconstruction showed better Constant (p < 0.0001), VAS (p < 0.0001) and SSV (p = 0.0177) results compared to augmented techniques. No differences in functional outcomes could be found between anatomic biologic non-augmented graft versus synthetic reconstructions. Overall, methodological quality of the included studies was low. CONCLUSION: Anatomic reconstructions, both synthetic and biologic, showed the best functional results. LEVEL OF EVIDENCE: IV.

3D printing in shoulder surgery.

Three-dimensional (3D) printing is a novel modality with the potential to make a huge impact in the surgical field. The aim of this paper is to provide an overview on the current use of 3D printing in shoulder surgery. We have reviewed the use of this new method in 3 fields of shoulder surgery: shoulder arthroplasty, recurrent shoulder instability and orthopedic shoulder traumatology. In shoulder arthroplasty, several authors have shown that the use of the 3D printer improves the positioning of the glenoid component, even if longer clinical follow-up is needed to determine whether the cost of this system rationalizes the potential improved functional outcomes and decreases glenoid revision rates. In the treatment of anterior shoulder instability, the literature agrees on the fact that the use of the 3D printing can: enhance the dept and size of bony lesions, allowing a patient tailored surgical planning and potentially reducing operative times; allow the production of personalized implants to restore substantial bone loss; restore glenohumeral morphology and instability. In orthopedic trauma, the use of 3D printing can be helpful to increase the understanding of fracture patterns, facilitating a more personalized planning, and can be used for resident training and education. We can conclude the current literature regarding the use of 3D printed models in orthopedic surgery agrees finding objective improvements to preoperative planning and to the surgical procedure itself, by shortening the intraoperative time and by the possibility to develop custom-made, patient-specific surgical instruments, and it suggests that there are tangible benefits for its implementation.

The role of adipose derived stem cells in the treatment of rotator cuff tears: from basic science to clinical application.

Over the last decade, regenerative medicine has become increasingly popular throughout the scientific community. The poor healing capacity at the tendon-bone interface makes the rotator cuff an appealing target for biologic agents. Adipose derived stem cells are mesenchymal cells with the capacity for self-renewal and multipotential differentiation. They have been recently proposed, both in isolation and as adjuvants to existing surgical therapies, for the treatment of rotator cuff tears. Several studies have been carried out in this research field, starting from the biological characteristics of adipose derived stem cells, their preparation and culture, up to the application in the experimental field on animal models and on humans. The purpose of this study was to provide a state of the art about the current basic science and clinical literature for the effectiveness of adipose derived stem cells in the treatment of rotator cuff tears.

Arthroscopic treatment of an unusual distal clavicle ostheochondroma causing rotator cuff impingement: case report and literature review.

Chronic shoulder impingement is one of the most common causes of shoulder pain. Intrinsic, extrinsic and secondary factors play a role in this syndrome; however the etiology of the pathology is still under debate. In rare cases, it can be caused by tumors, such as an osteochondroma. In the present study, a 49-year-old patient presented with shoulder pain for 6 months. Initially he underwent conservative treatment, without relief of symptoms. Xrays and MRI were then performed and showed the presence of an exostotic formation on the undersurface of the lateral third of the clavicle. The formation was arthroscopically removed. Histologic examination confirmed the diagnosis of osteochondroma. After surgery, the patient resumed fully activities with no symptoms within 3 months. At 1 year follow up, there are still no clinical or radiological signs of recurrence. This is, to our knowledge, the first case where an arthroscopic approach was used to remove an ostochondroma of the distal third of the clavicle.

COVID-19 pandemic: management of patients affected by SARS-CoV-2 in Rome COVID Hospital 2 Trauma Centre and safety of our surgical team.

BACKGROUND: SARS-CoV-2 pandemic left a deep mark in the health systems around the globe, leading to an important change in the way we intend the access to the healthcare and its fruition. Hospitals faced something unexpected, and they underwent a deep change and so did orthopaedic activity. MATERIALS AND METHODS: In "A. Gemelli" University hospital new protocols were adopted for the safe management of patients affected by SARS-CoV-2. Among these patients, six had to be treated also for orthopaedic problems. The management of these patients, from the admission in the Emergency Room (E.R). to the operating room (O.R.), followed the protocols we developed for the coronavirus crisis. RESULTS: Four among the six patients underwent surgical treatments. Two of them showed a change of their clinical status, due to a worsening of COVID-19 symptoms, so the surgical option was postponed. All of them were admitted to the Infectious Diseases Unit, rather than the Orthopaedic and Traumatology Unit, in order to provide the best measures to prevent the spread of the contagion and to ensure the best treatment for COVID-19. No O.R. staff was infected by SARS-CoV-2. CONCLUSIONS: More studies are needed to provide a higher statistical significance to the safety measures taken in order to contrast the spread of SARS-CoV-2 in the Surgical Room. Orthopaedic surgeons are more exposed to the contagion due to the particular tools set they use. A more sensible and specific quick test for novel Coronavirus is particularly needed, due to the lack of sensitivity of the serological rapid test.