RESUMEN
Caries is a chronic disease that causes the alteration of the structure of dental tissues by acid dissolution (in enamel, dentine and cementum) and proteolytic degradation (dentine and cementum) and generates an important cost of care. There is a need to visualise and characterise the acid dissolution process on enamel due to its hierarchical structure leading to complex structural modifications. The process starts at the enamel surface and progresses into depth, which necessitates the study of the internal enamel structure. Artificial demineralisation is usually employed to simulate the process experimentally. In the present study, the demineralisation of human enamel was studied using surface analysis carried out with atomic force microscopy as well as 3D internal analysis using synchrotron X-ray tomography during acid exposure with repeated scans to generate a time-lapse visualisation sequence. Two-dimensional analysis from projections and virtual slices and 3D analysis of the enamel mass provided details of tissue changes at the level of the rods and inter-rod substance. In addition to the visualisation of structural modifications, the rate of dissolution was determined, which demonstrated the feasibility and usefulness of these techniques. The temporal analysis of enamel demineralisation is not limited to dissolution and can be applied to other experimental conditions for the analysis of treated enamel or remineralisation.
RESUMEN
Host defence peptides are critical factors of immune systems in all life forms. Considered for therapeutic development in the post-antibiotic era, these molecules rupture microbial membranes at micromolar concentrations. Here we report a self-concentrating mechanism of membrane disruption, which occurs at therapeutically more relevant nanomolar concentrations. Induced by a four-helix bacteriocin the mechanism manifests in a multi-modal disruption pattern. Using in situ atomic force microscopy we show that the pattern and its kinetic profiles remain the same in a range of nano-to-micromolar concentrations. We reveal that the bacteriocin creates its own boundaries in phospholipid bilayers in which it self-concentrates to promote transmembrane poration. The findings offer an exploitable insight into nanomolar antimicrobial mechanisms.
Asunto(s)
Antiinfecciosos , Bacteriocinas , Antibacterianos/farmacología , Antiinfecciosos/química , Péptidos Catiónicos Antimicrobianos/química , Membrana Dobles de Lípidos/químicaRESUMEN
Self-assembling peptides have become important building blocks for materials design (e.g. hydrogels) and play a crucial role in a range of diseases including Alzheimer and Parkinson. In this context, accessing the nanomechanical properties of ubiquitous ß-sheet rich nanofibres (e.g.: amyloids) is key to the formulation of materials and design of therapies. Although the bulk mechanical properties of hydrogels can easily be accessed using common techniques and equipment, the mechanical properties of their constituent fibres, in particular if with radii in the nanometre scale, are more challenging to measure and estimate. In this work we show for the first time how the rapid nanomechanical mapping technique: amplitude modulation-frequency modulation (AM-FM), can be used to determine the heights, Young's moduli and viscosity coefficients of a series of ß-sheet peptide nanofibres with high statistical confidence. Our results show how peptide sequence and in particular length, charge and interaction with the substrate affect the viscoelastic properties of the peptide fibres.
Asunto(s)
Hidrogeles , Péptidos , Módulo de Elasticidad , Conformación Proteica en Lámina beta , ViscosidadRESUMEN
The goal of this study was to determine the frequency of resistance to extended-spectrum cephalosporins (ESCs) in Escherichia coli and other Enterobacterales from turkeys in Canada and characterize the associated resistance determinants. Pooled fecal samples were collected in 77 turkey farms across British Columbia, Québec, and Ontario. Isolates were obtained with and without selective enrichment cultures and compared to isolates from diagnostic submissions of suspected colibacillosis cases in Ontario. Isolates were identified using MALDI-TOF and susceptibility to ESCs was assessed by disk diffusion. The presence of blaCMY, blaCTX-M, blaTEM, and blaSHV was tested by PCR. Transformation experiments were used to characterize blaCMY plasmids. Genome sequencing with short and long reads was performed on a representative sample of blaCTX-M-positive isolates to assess isolates relatedness and characterize blaCTX-M plasmids. For the positive enrichment cultures (67% of total samples), 93% (587/610) were identified as E. coli, with only a few other Enterobacterales species identified. The frequency of ESC resistance was low in E. coli isolates from diagnostic submission (4%) and fecal samples without selective enrichment (5%). Of the ESC-resistant Enterobacterales isolates from selective enrichments, 71%, 18%, 14%, and 8% were positive for blaCMY, blaTEM, blaCTX-M, and blaSHV, respectively. IncI1 followed by IncK were the main incompatibility groups identified for blaCMY plasmids. The blaCTX-M-1 gene was found repeatedly on IncI1 plasmids of the pMLST type 3, while blaCTX-M-15, blaCTX-M-55, and blaCTX-M-65 were associated with a variety of IncF plasmids. Clonal spread of strains carrying blaCTX-M genes between turkey farms was observed, as well as the presence of an epidemic blaCTX-M-1 plasmid in unrelated E. coli strains. In conclusion, Enterobacterales resistant to ESCs were still widespread at low concentration in turkey feces two years after the cessation of ceftiofur use. Although blaCMY-2 is the main ESC resistance determinant in E. coli from Canadian turkeys, blaCTX-M genes also occur which are often carried by multidrug resistance plasmids. Both clonal spread and horizontal gene transfer are involved in parallel in the spread of blaCTX-M genes in Enterobacterales from Canadian turkeys.
Asunto(s)
Antibacterianos/farmacología , Cefalosporinas/farmacología , Infecciones por Enterobacteriaceae/veterinaria , Enterobacteriaceae/efectos de los fármacos , Enfermedades de las Aves de Corral/tratamiento farmacológico , Pavos/microbiología , Animales , Antibacterianos/uso terapéutico , Cefalosporinas/uso terapéutico , Farmacorresistencia Bacteriana , Enterobacteriaceae/genética , Enterobacteriaceae/aislamiento & purificación , Infecciones por Enterobacteriaceae/tratamiento farmacológico , Escherichia coli/efectos de los fármacos , Escherichia coli/genética , Escherichia coli/aislamiento & purificación , Enfermedades de las Aves de Corral/microbiologíaRESUMEN
It is well recognised that the average UK diet does not contain sufficient fibre. However, the introduction of fibre is often at the detriment of the organoleptic properties of a food. In this study on the gastrointestinal fate of nanoparticles, we have used cellulose nano-crystals (CNCs) as Pickering stabilising agents in oil in water emulsions. These emulsions were found to be highly stable against coalescence. The CNC and control emulsions were then exposed to simulated upper gastrointestinal tract digestion and the results compared to those obtained from a conventional protein stabilised emulsion. Finally the digested emulsions were exposed to murine intestinal mucosa and lipid and bile absorption was monitored. Importantly, the results show that the CNCs were entrapped in the intestinal mucus layer and failed to reach the underlying epithelium. This entrapment may also have led to the reduced absorption of saturated lipids from the CNC stabilised emulsion versus the control emulsion. The results show the potential of CNCs as a safe and effective emulsifier.
Asunto(s)
Celulosa/química , Emulsiones/química , Mucosa Intestinal/metabolismo , Nanopartículas/química , Animales , Ácidos y Sales Biliares/química , Excipientes/química , Ácidos Grasos/química , Aditivos Alimentarios/química , Mucosa Intestinal/química , Ratones , Ratones Endogámicos C57BLRESUMEN
We report a novel RNase H2-dependent PCR (rhPCR) genotyping assay for a small number of discriminatory single-nucleotide polymorphisms (SNPs) that identify lineages and sub-lineages of the highly clonal pathogen Salmonella Heidelberg (SH). Standard PCR primers targeting numerous SNP locations were initially designed in silico, modified to be RNase H2-compatible, and then optimized by laboratory testing. Optimization often required repeated cycling through variations in primer design, assay conditions, reagent concentrations and selection of alternative SNP targets. The final rhPCR assay uses 28 independent rhPCR reactions to target 14 DNA bases that can distinguish 15 possible lineages and sub-lineages of SH. On evaluation, the assay correctly identified the 12 lineages and sub-lineages represented in a panel of 75 diverse SH strains. Non-specific amplicons were observed in 160 (15.2%) of the 1050 reactions, but due to their low intensity did not compromise assay performance. Furthermore, in silico analysis of 500 closed genomes from 103 Salmonella serovars and laboratory rhPCR testing of five prevalent Salmonella serovars including SH indicated the assay can identify Salmonella isolates as SH, since only SH isolates generated amplicons from all 14 target SNPs. The genotyping results can be fully correlated with whole genome sequencing (WGS) data in silico. This fast and economical assay, which can identify SH isolates and classify them into related or unrelated lineages and sub-lineages, has potential applications in outbreak identification, source attribution and microbial source tracking.
Asunto(s)
Técnicas de Genotipaje/métodos , Tipificación Molecular/métodos , Reacción en Cadena de la Polimerasa/métodos , Polimorfismo de Nucleótido Simple/genética , Salmonella enterica/genética , Genoma Bacteriano/genética , Humanos , Ribonucleasas/metabolismo , Infecciones por Salmonella/microbiologíaRESUMEN
Drug crystallization on and in the skin has been reported following application of topical or transdermal formulations. This study explored novel probe-based approaches including localized nanothermal analysis (nano-TA) and photothermal microspectroscopy (PTMS) to investigate and locate drug crystals in the stratum corneum (SC) of porcine skin following application of simple ibuprofen (IBU) formulations. We also conducted in vitro skin permeation studies and tape stripping. The detection of drug crystals in the SC on tape strips was confirmed using localized nano-TA, based on the melting temperature of IBU. The melting of IBU was also evident as indicated by a double transition and confirmed the presence of drug crystals in the SC. The single point scans of PTMS on the tape strips allowed collection of the photothermal FTIR spectra of IBU, confirming the existence of drug crystals in the skin. The combined methods also indicated that drug crystallized in the SC at a depth of â¼4-7 µm. Future studies will examine the potential of these techniques to probe crystallization of other commonly used actives in topical and transdermal formulations.
Asunto(s)
Cristalización/métodos , Epidermis/metabolismo , Microespectrofotometría/métodos , Animales , Ibuprofeno/química , Ibuprofeno/metabolismo , Absorción Cutánea , Espectroscopía Infrarroja por Transformada de Fourier , PorcinosRESUMEN
A recent strategy that has emerged for the design of increasingly functional hydrogels is the incorporation of nanofillers in order to exploit their specific properties to either modify the performance of the hydrogel or add functionality. The emergence of carbon nanomaterials in particular has provided great opportunity for the use of graphene derivatives (GDs) in biomedical applications. The key challenge when designing hybrid materials is the understanding of the molecular interactions between the matrix (peptide nanofibers) and the nanofiller (here GDs) and how these affect the final properties of the bulk material. For the purpose of this work, three gelling ß-sheet-forming, self-assembling peptides with varying physiochemical properties and five GDs with varying surface chemistries were chosen to formulate novel hybrid hydrogels. First the peptide hydrogels and the GDs were characterized; subsequently, the molecular interaction between peptides nanofibers and GDs were probed before formulating and mechanically characterizing the hybrid hydrogels. We show how the interplay between electrostatic interactions, which can be attractive or repulsive, and hydrophobic (and π-π in the case of peptide containing phenylalanine) interactions, which are always attractive, play a key role on the final properties of the hybrid hydrogels. The shear modulus of the hydrid hydrogels is shown to be related to the strength of fiber adhesion to the flakes, the overall hydrophobicity of the peptides, as well as the type of fibrillar network formed. Finally, the cytotoxicity of the hybrid hydrogel formed at pH 6 was also investigated by encapsulating and culturing human mesemchymal stem cells (hMSC) over 14 days. This work clearly shows how interactions between peptides and GDs can be used to tailor the mechanical properties of the resulting hydrogels, allowing the incorporation of GD nanofillers in a controlled way and opening the possibility to exploit their intrinsic properties to design novel hybrid peptide hydrogels for biomedical applications.
Asunto(s)
Grafito/química , Hidrogeles/síntesis química , Péptidos/química , Línea Celular , Humanos , Hidrogeles/farmacología , Interacciones Hidrofóbicas e Hidrofílicas , Células Madre Mesenquimatosas/efectos de los fármacos , Nanofibras/química , Electricidad EstáticaRESUMEN
Ammonia borane (AB) is among the most promising precursors for the large-scale synthesis of hexagonal boron nitride (h-BN) by chemical vapour deposition (CVD). Its non-toxic and non-flammable properties make AB particularly attractive for industry. AB decomposition under CVD conditions, however, is complex and hence has hindered tailored h-BN production and its exploitation. To overcome this challenge, we report in-depth decomposition studies of AB under industrially safe growth conditions. In situ mass spectrometry revealed a time and temperature-dependent release of a plethora of NxBy-containing species and, as a result, significant changes of the N:B ratio during h-BN synthesis. Such fluctuations strongly influence the formation and morphology of 2D h-BN. By means of in situ gas monitoring and regulating the precursor temperature over time we achieve uniform release of volatile chemical species over many hours for the first time, paving the way towards the controlled, industrially viable production of h-BN.
RESUMEN
A correction to this article has been published and is linked from the HTML version of this paper. The error has been fixed in the paper.
RESUMEN
Direct visual evidence obtained by atomic force microscopy demonstrates that when xanthan is adsorbed from aqueous solution onto the heterogeneously charged substrate mica, its helical conformation is distorted. Following adsorption it requires annealing for several hours to restore its ordered helical state. Once the helix state reforms, the AFM images obtained showed clear resolution of the periodicity with a value of 4.7nm consistent with the previously predicted models. In addition, the images also reveal evidence that the helix is formed by a double strand, a clarification of an ambiguity of the xanthan ultrastructure that has been outstanding for many years.
RESUMEN
Inkjet-printing technology was used to apply biodegradable and biocompatible polymeric coatings of poly(d,l-lactide) with the antiproliferative drugs simvastatin (SMV) and paclitaxel (PCX) on coronary metal stents. A piezoelectric dispenser applied coating patterns of very fine droplets (300 pL) and inkjet printing was optimized to develop uniform, accurate and reproducible coatings of high yields on the stent strut. The drug loaded polymeric coatings were assed by scanning electron microscopy (SEM), atomic force microscopy (AFM), and transition thermal microscopy (TTM) where a phase separation was observed for SMV/PLA layers while PCX showed a uniform distribution within the polymer layers. Cytocompatibility studies of PLA coatings showed excellent cell adhesion with no decrease of cell viability and proliferation. In vivo stent implantation studies showed significant intrastent restenosis (ISR) for PCX/PLA and PLA plain coatings similar to marketed Presillion (bare metal) and Cypher (drug eluting) stents. The investigation of several cytokine levels after 7 days of stent deployment showed no inflammatory response and hence no in vivo cytotoxicity related to PLA coatings. Inkjet printing can be employed as a robust coating technology for the development of drug eluting stents compared to the current conventional approaches.
Asunto(s)
Stents Liberadores de Fármacos , Paclitaxel/química , Materiales Biocompatibles Revestidos/química , Citocinas/química , Sistemas de Liberación de Medicamentos/métodos , Microscopía de Fuerza Atómica , Microscopía Electrónica de Rastreo , Polímeros/químicaRESUMEN
Large-area synthesis of high-quality graphene by chemical vapour deposition on metallic substrates requires polishing or substrate grain enlargement followed by a lengthy growth period. Here we demonstrate a novel substrate processing method for facile synthesis of mm-sized, single-crystal graphene by coating polycrystalline platinum foils with a silicon-containing film. The film reacts with platinum on heating, resulting in the formation of a liquid platinum silicide layer that screens the platinum lattice and fills topographic defects. This reduces the dependence on the surface properties of the catalytic substrate, improving the crystallinity, uniformity and size of graphene domains. At elevated temperatures growth rates of more than an order of magnitude higher (120 µm min(-1)) than typically reported are achieved, allowing savings in costs for consumable materials, energy and time. This generic technique paves the way for using a whole new range of eutectic substrates for the large-area synthesis of 2D materials.
RESUMEN
The focus of this study was to investigate the effect of processing on the surface crystallization of amorphous molecular dispersions and gain insight into the mechanisms underpinning this effect. The model systems, amorphous molecular dispersions of felodipine-EUDRAGIT® E PO, were processed both using spin coating (an ultra-fast solvent evaporation based method) and hot melt extrusion (HME) (a melting based method). Amorphous solid dispersions with drug loadings of 10-90% (w/w) were obtained by both processing methods. Samples were stored under 75% RH/room temperatures for up to 10months. Surface crystallization was observed shortly after preparation for the HME samples with high drug loadings (50-90%). Surface crystallization was characterized by powder X-ray diffraction (PXRD), ATR-FTIR spectroscopy and imaging techniques (SEM, AFM and localized thermal analysis). Spin coated molecular dispersions showed significantly higher surface physical stability than hot melt extruded samples. For both systems, the progress of the surface crystal growth followed zero order kinetics on aging. Drug enrichment at the surfaces of HME samples on aging was observed, which may contribute to surface crystallization of amorphous molecular dispersions. In conclusion it was found the amorphous molecular dispersions prepared by spin coating had a significantly higher surface physical stability than the corresponding HME samples, which may be attributed to the increased process-related apparent drug-polymer solubility and reduced molecular mobility due to the quenching effect caused by the rapid solvent evaporation in spin coating.
Asunto(s)
Química Farmacéutica/métodos , Felodipino/química , Ácidos Polimetacrílicos/química , Fenómenos Químicos , Cristalización , Estabilidad de Medicamentos , Felodipino/metabolismo , Ácidos Polimetacrílicos/metabolismo , Solubilidad , Propiedades de Superficie , Difracción de Rayos XRESUMEN
PURPOSE: In this study we explore the use of nano-scale localized thermal analysis (LTA) and transition temperature microcopy (TTM) as a novel combined approach to studying phase separation in HME dispersions of cyclosporine A in Eudragit EPO. METHODS: Modulated temperature differential scanning calorimetry (MTDSC), attenuated total reflectance FTIR spectroscopy, nano-LTA and TTM were performed on raw materials and dispersions prepared by hot melt extrusion (HME) and spin coating. For samples prepared by HME, two mixing temperatures (110°C and 150°C) and residence times (5 and 15 min) were investigated. RESULTS: Spin coated samples showed an intermediate T g for the mixed systems consistent with molecular dispersion formation. The HME samples prepared at 110°C showed evidence of inhomogeneity using MTDSC and FTIR, while those produced at 150°C h showed evidence for the formation of a single phase system using MTDSC. The nanothermal methods, however, indicated the presence of phase separated cyclosporine A at the higher preparation temperature while the TTM was able to map regions of differing penetration temperatures, indicating the presence of compositionally inhomogeneous regions in all but the high processing temperature/high residence time samples. CONCLUSIONS: TTM is a potentially important new method for studying phase separation and that such separation may remain undetected or poorly understood using conventional bulk analytical techniques.
Asunto(s)
Antifúngicos/química , Ciclosporina/química , Microscopía de Fuerza Atómica/métodos , Transición de Fase , Ácidos Polimetacrílicos/química , Rastreo Diferencial de Calorimetría , Solubilidad , Espectroscopía Infrarroja por Transformada de Fourier , Temperatura de TransiciónRESUMEN
The increasing use of high throughput methods, coupled with the need to develop approaches to anticipate long term stability issues, has necessitated the introduction of testing approaches whereby extremely small samples may be rapidly analysed. A novel method is described whereby the UV light-induced degradation of single particles of a model drug, nifedipine, may be rapidly and simply monitored using photothermal infrared microspectroscopy (PTMS). The technique involves the contact attachment of individual particles to a heated probe tip composed of a modified Wollaston wire which enables temperature fluctuations to be measured. Application of a focused IR beam to excite the sample allows measurement and subsequent Fourier transformation of the resultant interferogram to produce an IR spectrum which is in good agreement with that obtained from conventional IR methods. By application of a UV source to the assembly for specified time periods, we demonstrate that it is possible to monitor the appearance of peaks associated with degradation products as a function of time. The technique is critically evaluated in terms of practical issues associated with volatilization, particle size effects and orientation to the light source as well as more general issues associated with the sensitivity, resolution and quantitative interpretation of data from the PTMS technique. Overall the method has been shown to be capable of rapid measurement of photo-instability on individual particles, with important implications for development of the approach as a rapid screening or high throughput technique, although there are practical and theoretical limitations to reliable quantitative analysis at the present time.
Asunto(s)
Microespectrofotometría/métodos , Nifedipino/análisis , Fotólisis , Rayos Infrarrojos , Nifedipino/química , Tamaño de la Partícula , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Photothermal Fourier transform infrared (FTIR) microspectroscopy (PTMS), involving the combination of FTIR spectroscopy with atomic force microscopy, has been used to examine compacts of amorphous and crystalline salbutamol sulfate in order to assess the ability of the technique to distinguish between different physical forms in a multicomponent material. Samples of amorphous and crystalline material were assessed using modulated temperature differential scanning calorimetry (DSC), atomic force microscopy, microthermal analysis, and conventional FTIR. Mixed compacts were then prepared such that verification of the location of the forms present was possible via topography and localized thermal analysis. PTMS studies were then performed on selected interrogation points, with spectra obtained which were largely intermediate between those corresponding to the two individual forms. Calculation of the thermal diffusivity indicated a resolution for the technique corresponding to a hemisphere of a major diameter in the region of 40 µm, which is large in relation to the particle sizes involved. However, distinction into amorphous, crystalline, and indeterminate categories was possible using chemometric analysis (hierarchical cluster analysis and principal component analysis). Good agreement was found between the identification methods for the mixed systems. The study has therefore shown the potential, as well as identifying the limitations, of using PTMS as a means of spatially identifying components in complex materials.
Asunto(s)
Albuterol/química , Microscopía de Fuerza Atómica/métodos , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Agonistas de Receptores Adrenérgicos beta 2/química , Fenómenos Químicos , Química Farmacéutica , Cristalización , Calor , Propiedades de Superficie , Conductividad TérmicaRESUMEN
Phase separation in pharmaceutical solid dispersion thin films under high humidity is still poorly understood on the submicrometer scale. This study investigated the phase separation of a model solid dispersion thin film, felodipine-PVP K29/32, prepared by spin-coating and analyzed using probe-based methods including atomic force microscopy, nanothermal analysis, and photothermal infrared microspectroscopy. The combined use of these techniques revealed that the phase separation process occurring in the thin films under high humidity is different from that in dry conditions reported previously. The initial stage of phase separation is primarily initiated in the bulk of the films as amorphous drug domains. Drug migration toward the surface of the solid dispersion film was then observed to occur under exposure to increased humidity. PVP cannot prevent phase separation of felodipine under high humidity but can minimize the crystallization of amorphous felodipine domains in the solid dispersion thin films. This study demonstrates the unique abilities of these nanocharacterization methods for studying, in three dimensions, the phase separation of thin films for pharmaceutical applications.
Asunto(s)
Cristalización/métodos , Felodipino/química , Humedad , Microscopía de Fuerza AtómicaRESUMEN
The ability to characterize the physical and chemical properties of dosage forms is crucial to a more complete understanding of how vehicles for drug delivery behave and therefore how effective they are. Spatially resolved characterization that enables the visualization of properties on the nanoscale is particularly powerful. The usefulness of scanning probe microscopy (SPM) in the field of drug delivery is becoming increasingly well established and the use of thermal probes offers new capabilities thus enabling SPM to provide more and sometimes unique information. One type of measurement enabled by thermal probes is determining transition temperatures by means of local thermal analysis. The ability to identify and characterize materials in this way has found applications in characterizing a wide range of dosage forms. A complimentary thermal probe technique is photothermal infrared microspectroscopy (PTMS). PTMS offers a variety of advantages over more conventional approaches including the ability analyze compacts without the need for thin sections. It is also able to achieve sub-micron spatial resolution. Thermal probe techniques can characterize pharmaceutical dosage forms in terms of their physical properties and their chemical composition.