Tunable Magnetoelastic Effects in Voltage-Controlled Exchange-Coupled Composite Multiferroic Microstructures.

The magnetoelectric properties of exchange-coupled Ni/CoFeB-based composite multiferroic microstructures are investigated. The strength and sign of the magnetoelastic effect are found to be strongly correlated with the ratio between the thicknesses of two magnetostrictive materials. In cases where the thickness ratio deviates significantly from one, the magnetoelastic behavior of the multiferroic microstructures is dominated by the thicker layer, which contributes more strongly to the observed magnetoelastic effect. More symmetric structures with a thickness ratio equal to one show an emergent interfacial behavior which cannot be accounted for simply by summing up the magnetoelastic effects occurring in the two constituent layers. This aspect is clearly visible in the case of ultrathin bilayers, where the exchange coupling drastically affects the magnetic behavior of the Ni layer, making the Ni/CoFeB bilayer a promising next-generation synthetic magnetic system entirely. This study demonstrates the richness and high tunability of composite multiferroic systems based on coupled magnetic bilayers compared to their single magnetic layer counterparts. Furthermore, because of the compatibility of CoFeB with present magnetic tunnel junction-based spintronic technologies, the reported findings are expected to be of great interest for the development of ultralow-power magnetoelectric memory devices.

An in vivo pilot study of a microporous thin film nitinol-covered stent to assess the effect of porosity and pore geometry on device interaction with the vessel wall.

Sputter-deposited thin film nitinol constructs with various micropatterns were fabricated to evaluate their effect on the vessel wall in vivo when used as a covering for commercially available stents. Thin film nitinol constructs were used to cover stents and deployed in non-diseased swine arteries. Swine were sacrificed after approximately four weeks and the thin film nitinol-covered stents were removed for histopathologic evaluation. Histopathology revealed differences in neointimal thickness that correlated with the thin film nitinol micropattern. Devices covered with thin film nitinol with a lateral × vertical length = 20 × 40 µm diamond pattern had minimal neointimal growth with well-organized cell architecture and little evidence of ongoing inflammation. Devices covered with thin film nitinol with smaller fenestrations exhibited a relatively thick neointimal layer with inflammation and larger fenestrations showed migration of inflammatory and smooth muscle cells through the micro fenestrations. This "proof-of-concept" study suggests that there may be an ideal thin film nitinol porosity and pore geometry to encourage endothelialization and incorporation of the device into the vessel wall. Future work will be needed to determine the optimal pore size and geometry to minimize neointimal proliferation and in-stent stenosis.

Determination of the exchange constant of Tb0.3Dy0.7Fe2 by broadband ferromagnetic resonance spectroscopy.

We present measurements of the exchange stiffness D and the exchange constant A of a sputtered 80 nm Tb0.3Dy0.7Fe2 film. Using a broadband ferromagnetic resonance setup in a wide frequency range from 10 GHz to 50 GHz, multiple perpendicular standing spin-wave resonances were observed with the external static magnetic field applied in-plane. The field corresponding to the strongest resonance peak at each frequency is used to determine the effective magnetization, the g-factor and the Gilbert damping. Furthermore, the dependence of spin-wave mode on field-position is observed for several frequencies. The analysis of spin-wave resonance spectra at multiple frequencies allows precise determination of the exchange stiffness D = (2.79 ± 0.02) × 10-17 T · m2 for an 80 nm thick film. From this value, we calculated the exchange constant A = (9.1 ± 0.1) pJ · m-1.

In vitro and in vivo testing of a novel, hyperelastic thin film nitinol flow diversion stent.

A flexible, low profile, flow diversion stent could replace endovascular coiling for the treatment of intracranial aneurysms. Micropatterned-thin film nitinol (TFN) is a novel biomaterial with high potential for use in next-generation endovascular devices. Recent advancements in micropatterning have allowed for fabrication of a hyperelastic thin film nitinol (HE-TFN). In this study, the authors describe in vitro and in vivo testing of novel HE-TFN based flow diverting stents. Two types of HE-TFN with expanded pores having long axes of 300 and 500 µm were used to fabricate devices. In vitro examination of the early thrombotic response in whole blood showed a possible mechanism for the device's function, whereby HE-TFN serves as a scaffold for blood product deposition. In vivo testing in swine demonstrated rapid occlusion of model wide-neck aneurysms. Average time to occlusion for the 300-µm device was 10.4 ± 5.5 min. (N = 5) and 68 ± 30 min for the 500-µm device (N = 5). All aneurysms treated with bare metal control stents remained patent after 240 min (N = 3). SEM of acutely harvested devices supported in vitro results, demonstrating that HE-TFN serves as a scaffold for blood product deposition, potentially enhancing its flow-diverting effect. Histopathology of devices after 42 days in vivo demonstrated a healthy neointima and endothelialization of the aneurysm neck region. HE-TFN flow-diverting stents warrant further investigation as a novel treatment for intracranial aneurysms.

In vitro hemocompatibility of thin film nitinol in stenotic flow conditions.

Because of its low profile and biologically inert behavior, thin film nitinol (TFN) is ideally suited for use in construction of endovascular devices. We have developed a surface treatment for TFN designed to minimize platelet adhesion by creating a superhydrophilic surface. The hemocompatibility of expanded polytetrafluorethylene (ePTFE), untreated thin film nitinol (UTFN), and a surface treated superhydrophilic thin film nitinol (STFN) was compared using an in vitro circulation model with whole blood under flow conditions simulating a moderate arterial stenosis. Scanning electron microscopy analysis showed increased thrombus on ePTFE as compared to UTFN or STFN. Total blood product deposition was 6.3 ± 0.8 mg/cm(2) for ePTFE, 4.5 ± 2.3 mg/cm(2) for UTFN, and 2.9 ± 0.4 mg/cm(2) for STFN (n = 12, p < 0.01). ELISA assay for fibrin showed 326 ± 42 µg/cm(2) for ePTFE, 45.6 ± 7.4 µg/cm(2) for UTFN, and 194 ± 25 µg/cm(2) for STFN (n = 12, p < 0.01). Platelet deposition measured by fluorescent intensity was 79,000 20,000 AU/mm(2) for ePTFE, 810 ± 190 AU/mm(2) for UTFN, and 1600 ± 25 AU/mm(2) for STFN (n = 10, p < 0.01). Mass spectrometry demonstrated a larger number of proteins on ePTFE as compared to either thin film. UTFN and STFN appear to attract significantly less thrombus than ePTFE. Given TFN's low profile and our previously demonstrated ability to place TFN covered stents in vivo, it is an excellent candidate for use in next-generation endovascular stents grafts.

Thin film nitinol microstent for aneurysm occlusion.

Thin film nitinol produced by sputter deposition was used in the design of microstents intended to treat small vessel aneurysms. Thin film microstents were fabricated by "hot-target" dc sputter deposition. Both stress-strain curves and differential scanning calorimetry curves were generated for the film used to fabricate stents. The films used for stents had an A(f) temperature of approximately 36 degrees C allowing for body activated response from a microcatheter. The 10 microm film was only slightly radio-opaque; thus, a Td marker was attached to the stents to guide fluoroscopic delivery. Thin film microstents were tested in a flow loop with and without nitinol support skeletons to give additional radial support. Stents could be compressed into and easily delivered with <3 Fr catheters. Theoretical frictional and wall drag forces on a thin film nitinol small vessel vascular stent were calculated, and the radial force exerted by thin film stents was evaluated theoretically and experimentally. In vivo studies in swine confirmed that thin film nitinol microstents could be deployed accurately and consistently in the swine cranial vasculature.

Biocorrosion investigation of two shape memory nickel based alloys: Ni-Mn-Ga and thin film NiTi.

Thin film nitinol and single crystal Ni-Mn-Ga represent two new shape memory materials with potential to be used as percutaneously placed implant devices. However, the biocompatibility of these materials has not been adequately assessed. Immersion tests were conducted on both thin film nitinol and single crystal Ni-Mn-Ga in Hank's balanced salt solution at 37 degrees C and pH 7.4. After 12 h, large pits were found on the Ni-Mn-Ga samples while thin film nitinol displayed no signs of corrosion. Further electrochemical tests on thin film nitinol samples revealed breakdown potentials superior to a mechanically polished nitinol disc. These results suggest that passivation or electropolishing of thin film nitinol maybe unnecessary to promote corrosion resistance.