The EcoChip 2: An Autonomous Sensor Platform for Multimodal Bio-environmental Monitoring of the Northern Habitat.

This paper presents the EcoChip 2, an autonomous multimodal bio-environmental sensor platform for the monitoring of microorganisms in the northern habitat. The EcoChip 2 prototype includes an array of 96-wells for the continuous monitoring of microbiological growth through a multichannel electrochemical impedance analyzer circuit. In addition, the platform includes luminosity, humidity, temperature sensors and monitoring. The developed electronic board uses an ultra-low-power microcontroller unit, a custom power management unit, a low-power wireless ISM-2.45 GHz transceiver, and a flash memory to accumulate and store the sensor data over extended monitoring periods. When a wireless base station is placed within the transmission range of the EcoChip 2, an embedded low-power wireless transceiver transmits the 96-wells impedance data and the other sensor data stored in the flash memory to the user interface. We present the measured performance of the prototype, along with laboratory test results of bacterial growth measurements inside the 96 wells in parallel. We show that the EcoChip 2 can successfully measure the impedances associated with bacterial growth over several hours using an excitation frequency of 2 kHz with power consumption of 114.6 mW under operating mode.

Fat-free yogurt made using a galactose-positive exopolysaccharide-producing recombinant strain of Streptococcus thermophilus.

To prevent textural defects in low-fat and fat-free yogurts, fat substitutes are routinely added to milk. In situ production of exopolysaccharides (EPS) by starter cultures is an acknowledged alternative to the addition of biothickeners. With the aim of increasing in situ EPS production, a recombinant galactose-positive EPS(+) Streptococcus thermophilus strain, RD-534-S1, was generated and compared with the parent galactose-negative EPS(+) strain RD-534. The RD-534-S1 strain produced up to 84 mg/L of EPS during a single-strain milk fermentation process, which represented 1.3 times more than the EPS produced by strain RD-534. Under conditions that mimic industrial yogurt production, the starter culture consisting of RD-534-S1 and (EPS(-)) Lactobacillus bulgaricus L210R strain (RD-534-S1/L210R) led to an EPS production increase of 1.65-fold as compared with RD-534-S1 alone. However, the amount of EPS produced did not differ from that found in yogurts produced using an isogenic starter culture that included the parent S. thermophilus strain RD-534 and Lb. bulgaricus L210R (RD-534/L210R). Moreover, the gel characteristics of set-style yogurt and the rheological properties of stirred-style yogurt produced using RD-534-S1/L210R were similar to the values obtained for yogurts made with RD-534/L210R. In conclusion, it is possible to increase the production of EPS by ropy S. thermophilus strains through genetic engineering of galactose metabolism. However, when used in combination with Lb. bulgaricus for yogurt manufacture, the EPS overproduction of recombinant strain is not significant.

Argentinean Lactococcus lactis bacteriophages: genetic characterization and adsorption studies.

AIMS: Characterization of four virulent Lactococcus lactis phages (CHD, QF9, QF12 and QP4) isolated from whey samples obtained from Argentinean cheese plants. METHODS AND RESULTS: Phages were characterized by means of electron microscopy, host range and DNA studies. The influence of Ca(2+), physiological cell state, pH and temperature on cell adsorption was also investigated. The double-stranded DNA genomes of these lactococcal phages showed distinctive restriction patterns. Using a multiplex PCR, phage QP4 was classified as a member of the P335 polythetic species while the three others belong to the 936 group. Ca(2+) was not needed for phage adsorption but indispensable to complete cell lysis by phage QF9. The lactococci phages adsorbed normally between pH 5 and pH 8, and from 0 degrees C to 40 degrees C, with the exception of phage QF12 which had an adsorption rate significantly lower at pH 8 and 0 degrees C. CONCLUSIONS: Lactococcal phages from Argentina belong to the same predominant groups of phages found in other countries and they have the same general characteristics. SIGNIFICANCE AND IMPACT OF THE STUDY: This work is the first study to characterize Argentinean L. lactis bacteriophages.

Galactose metabolism and capsule formation in a recombinant strain of Streptococcus thermophilus with a galactose-fermenting phenotype.

The capsule-producing, galactose-negative Streptococcus thermophilus MR-1C strain was first transformed with a low-copy plasmid containing a functional galK gene from Streptococcus salivarius to generate a recombinant galactose-fermenting Strep. thermophilus strain named MR-AAC. Then, we compared the functional properties of Strep. thermophilus MR-AAC with those of the parent MR-1C strain when used as starter for fermented products and cheese. In lactose-supplemented laboratory medium, MR-AAC metabolized galactose, but only when the amount of lactose was less than 0.1% (wt/vol). After 7 h of fermentation, the medium was almost depleted of galactose. The parent strain, MR-1C, showed the same pattern, except that the concentration of galactose decreased by only 25% during the same period. It was found that, during milk fermentation and Mozzarella cheese production, the galactose-fermenting phenotype was not expressed by MR-AAC and this strain expelled galactose into the medium at a level similar to the parent MR-1C strain. In milk and in lactose-supplemented medium, capsular exopolysaccharide production occurred mainly during the late exponential phase and the stationary growth phase with similar kinetics between MR-1C and MR-AAC.

Detection and quantification of capsular exopolysaccharides from Streptococcus thermophilus using lectin probes.

The aim of this work was to use fluorescently labeled lectins to develop a convenient and reliable method to determine the relative abundance of capsular polysaccharides (CPS) at the surface of Streptococcus thermophilus MR-1C cells. Fluorescein isothiocyanate-labeled peanut agglutinin isolated from Arachis hypogaea was found to interact specifically with the CPS of Strep. thermophilus MR-1C. This labeled lectin was then used as an effective probe to detect and quantify CPS. A fluorescence-based lectin-binding assay was successfully applied to follow the accumulation of CPS during the growth of Strep. thermophilus MR-1C in milk and in M17 broth supplemented with lactose. Our results showed that in both media, CPS production by Strep. thermophilus MR-1C began during the exponential phase of growth and continued for several hours after the culture reached the stationary growth phase.

Diversity of Streptococcus thermophilus phages in a large-production cheese factory in Argentina.

Phage infections still represent a serious risk to the dairy industry, in which Streptococcus thermophilus is used in starter cultures for the manufacture of yogurt and cheese. The goal of the present study was to analyze the biodiversity of the virulent S. thermophilus phage population in one Argentinean cheese plant. Ten distinct S. thermophilus phages were isolated from cheese whey samples collected in a 2-mo survey. They were then characterized by their morphology, host range, and restriction patterns. These phages were also classified within the 2 main groups of S. thermophilus phages (cos- and pac-type) using a newly adapted multiplex PCR method. Six phages were classified as cos-type phages, whereas the 4 others belonged to the pac-type group. This study illustrates the phage diversity that can be found in one factory that rotates several cultures of S. thermophilus. Limiting the number of starter cultures is likely to reduce phage biodiversity within a fermentation facility.

Characterization of a new virulent phage (MLC-A) of Lactobacillus paracasei.

A new virulent bacteriophage (MLC-A) was recently isolated in Argentina from a probiotic dairy product containing a strain of Lactobacillus paracasei. Observation of the lysate with an electron microscope revealed bacteriophage particles with an icosahedral capsid of 57 +/- 2 nm; with a collar and a noncontractile tail of 156 +/- 3 nm terminating with a baseplate to which a tail fiber was attached. Therefore, phage MLC-A belongs to the Siphoviridae family. This phage was able to survive the pasteurization process and was resistant to alcohols and sodium hypochlorite (400 mg/kg). Only peracetic acid could inactivate high-titer suspensions of phages in a short time. The maximum rates of phage adsorption to its host cells were obtained at 30 degrees C with a pH between 5 and 7, and in the presence of calcium or magnesium ions. The host range of phage MLC-A encompassed L. paracasei and Lactobacillus casei strains, but it was not able to infect Lactobacillus rhamnosus or Lactobacillus gasseri strains. One-step growth kinetics of its lytic development revealed latent and burst periods of 30 and 135 min, respectively, with a burst size of about 69 +/- 4 plaque-forming units per infected cell. Phage MLC-A had a distinctive restriction profile when compared with the 2 well-studied Lactobacillus phages, PL-1 and J-1. The genome size of the MLC-A phage was estimated to be approximately 37 kb. This study presents the description of the first phage specific for L. paracasei isolated in Argentina. The isolation of phage MLC-A indicates that, beside lactic acid bacteria starters, probiotic cultures can also be sensitive to virulent phages in industrial processes.

Use of an alpha-galactosidase gene as a food-grade selection marker for Streptococcus thermophilus.

The alpha-galactosidase gene (aga) of Lactococcus raffinolactis ATCC 43920 was previously shown to be an efficient food-grade selection marker in Lactococcus lactis and Pediococcus acidilactici but not in Streptococcus thermophilus. In this study, we demonstrated that the alpha-galactosidase of L. raffinolactis is thermolabile and inoperative at 42 degrees C, the optimal growth temperature of S. thermophilus. An in vitro assay indicated that the activity of this alpha-galactosidase at 42 degrees C was only 3% of that at 30 degrees C, whereas the enzyme retained 23% of its activity at 37 degrees C. Transformation of Strep. thermophilus RD733 with the shuttle-vector pNZ123 bearing the aga gene of L. raffinolactis (pRAF301) generated transformants that were stable and able to grow on melibiose and raffinose at 37 degrees C or below. The transformed cells possessed 6-fold more alpha-galactosidase activity after growth on melibiose than cells grown on lactose. Slot-blot analyses of aga mRNA indicated that repression by lactose occurred at the transcriptional level. The presence of pRAF301 did not interfere with the lactic acid production when the transformed cells of Strep. thermophilus were grown at the optimal temperature in milk. Using the recombinant plasmid pRAF301, which carries a chloramphenicol resistance gene in addition to aga, we showed that both markers were equally efficient at differentiating transformed from nontransformed cells. The aga gene of L. raffinolactis can be used as a highly efficient selection marker in Strep. thermophilus.

Identification of an inducible bacteriophage in a virulent strain of Streptococcus suis serotype 2.

Streptococcus suis infection is considered to be a major problem in the swine industry worldwide. Most virulent Canadian isolates of S. suis serotype 2 do not produce the known virulence markers for this pathogen. PCR-based subtraction hybridization was adapted to isolate unique DNA sequences which were specific to virulent strains of S. suis isolated in Canada. Analysis of some subtracted DNA clones revealed significant homology with bacteriophages of gram-positive bacteria. An inducible phage (named Ss1) was observed in S. suis following the incubation of the virulent strain 89-999 with mitomycin C. Phage Ss1 has a long noncontractile tail and a small isometric nucleocapsid and is a member of the Siphoviridae family. Ss1 phage DNA appears to be present in most Canadian S. suis strains tested in this study, which were isolated from diseased pigs or had proven virulence in mouse or pig models. To our knowledge, this is the first report of the isolation of a phage in S. suis.

Technical note: Use of RFLP to characterize Lactococcus lactis strains producing exopolysaccharides.

Restriction fragment length polymorphism (RFLP) is used to differentiate microorganisms by analysis of their DNA restriction patterns. A modified RFLP procedure is proposed for the rapid characterization of Lactococcus lactis strains producing exopolysaccharides (EPS). The availability of such effective cataloging system is likely to benefit research aimed at identifying lactococcal strains that produce novel EPS.

Biochemistry, genetics, and applications of exopolysaccharide production in Streptococcus thermophilus: a review.

Many strains of Streptococcus thermophilus synthesize extracellular polysaccharides. These molecules may be produced as capsules that are tightly associated with the cell, or they may be liberated into the medium as a loose slime (i.e., "ropy" polysaccharide). Although the presence of exopolysaccharide does not confer any obvious advantage to growth or survival of S. thermophilus in milk, in situ production by this species or other dairy lactic acid bacteria typically imparts a desirable "ropy" or viscous texture to fermented milk products. Recent work has also shown that exopolysaccharide-producing S. thermophilus can enhance the functional properties of Mozzarella cheese, but they are not phage-proof. As our understanding of the genetics, physiology, and functionality of bacterial exopolysaccharides continues to improve, novel applications for polysaccharides and polysaccharide-producing cultures are likely to emerge inside and outside the dairy industry. This article provides an overview of biochemistry, genetics, and applications of exopolysaccharide production in S. thermophilus.

Preventing phage lysis of Lactococcus lactis in cheese production using a neutralizing heavy-chain antibody fragment from llama.

Bacteriophage infection is still a persistent problem in large dairy processes despite extensive studies over the last decades. Consequently, new methods are constantly sought to prevent phage infection. In this paper, we show that phage neutralizing heavy-chain antibody fragments, obtained from Camelidae and produced at a large scale in the generally regarded as safe microorganism Saccharomyces cerevisiae, can effectively be used to impede phage induced lysis during a cheese process. The growth inhibition of the cheese starter culture by 10(5) pfu/ml cheese-milk of the small isometric-headed 936-type phage p2 was prevented by the addition of only 0.1 microg/ml (7 nM) of the neutralizing antibody fragment. The use of such antibody fragments in cheese manufacturing are a realistic and interesting option because of the small amount of antibody fragments that are needed. Moreover the antibodies are produced in a food grade microorganism and can easily be isolated from the fermentation liquid in a pure and DNA free form.

Identification of a genetic determinant responsible for host specificity in Streptococcus thermophilus bacteriophages.

Phage-host interactions remain poorly understood in lactic acid bacteria and essentially in all Gram-positive bacteria. The aim of this study was to identify the phage genetic determinant (anti-receptor) involved in the recognition of Streptococcus thermophilus hosts. The complete genomic sequence of the lytic S. thermophilus phage DT1 was determined previously, and bioinformatic analysis indicated that orf18 might be the anti-receptor gene. The orf18 of six additional S. thermophilus phages was determined (DT2, DT4, MD1, MD2, MD4 and Q5) and compared with the orf18 of DT1. The deduced ORF18 was divided into three domains. The first domain, which contains the N-terminal part of the protein, was conserved in all seven phages. The second domain was detected in only two phages and flanked by a motif called collagen-like repeats. The second domain also contained a variable region (VR1). All seven phages had a third domain that consisted of the C-terminal section of the protein as well as another variable region (VR2). Chimeric DT1 phages were constructed by recombination; a portion of its orf18 was replaced by the corresponding section in orf18 of the phage MD4. All DT1 chimeric phages acquired the host range of phage MD4. Analysis of the orf18 in the chimeric phages revealed that host specificity in phages DT1 and MD4 resulted from VR2. This is the first report on the identification and characterization of a phage gene involved in the host recognition process of Gram-positive bacteria.

DNA sequence analysis of three Lactococcus lactis plasmids encoding phage resistance mechanisms.

The three Lactococcus lactis plasmids pSRQ700, pSRQ800, and pSRQ900 encode the previously described anti-phage resistance mechanisms LlaDCHI, AbiK, and AbiQ, respectively. Since these plasmids are likely to be introduced into industrial Lactococcus lactis strains used to manufacture commercial fermented dairy products, their complete DNA sequences were determined and analyzed. The plasmids pSRQ700 (7784 bp), pSRQ800 (7858 bp), and pSRQ900 (10,836 bp) showed a similar genetic organization including a common lactococcal theta-type replicon. A second replication module showing features of the pMV158 family of rolling circle replicons was also found on pSRQ700. The theta replication regions of the three plasmids were associated with two additional coding regions, one of which encodes for HsdS, the specificity subunit of the type I restriction/modification system. When introduced into L. lactis IL1403, the HsdS of pSRQ800 and pSRQ900 conferred a weak resistance against phage P008 (936 species). These results indicated that both HsdS subunits can complement the chromosomally encoded type I restriction/modification system in IL1403. The genes involved in the phage resistance systems LlaDCHI, AbiK, and AbiQ were found in close proximity to and downstream of the replication modules. In pSRQ800 and pSRQ900, transfer origins and putative tyrosine recombinases were found upstream of the theta replicons. Genes encoding recombination proteins were also found on pSRQ700. Finally, open reading frames associated with bacteriocin production were found on pSRQ900, but no anti-lactococcal activity was detected. Based on our current knowledge, these three plasmids are safe and suitable for food-grade applications.

Isolation and characterization of a Streptococcus thermophilus plasmid closely related to the pMV158 family.

Twenty-two Streptococcus thermophilus strains used for milk fermentations were analyzed for their plasmid content and 13 of them (59%) were found to contain one or two plasmids. Fifteen S. thermophilus plasmids were divided into four groups using DNA homology. Ten plasmids were classified within group A and they shared homologies with all the previously sequenced S. thermophilus plasmids. Three plasmids (group B) hybridized with each other and two plasmids only hybridized with themselves (groups C and D). Single-stranded DNA was detected within strains containing plasmids of groups A, C, and D, indicating that they replicate via a rolling-circle mode. The only plasmid of group C, named pSMQ172, was further characterized. This 4230-bp plasmid replicates in Escherichia coli, Lactococcus lactis, and Streptococcus salivarius and does not confer phage resistance. Comparisons with databases showed that pSMQ172 was related to pMV158 of Streptococcus agalactiae and to pSSU1 of Streptococcus suis. These results suggest that genetic exchanges may have occurred between pathogenic and nonpathogenic streptococci.

Molecular characterization of a theta replication plasmid and its use for development of a two-component food-grade cloning system for Lactococcus lactis.

pCD4, a small, highly stable theta-replicating lactococcal plasmid, was used to develop a food-grade cloning system. Sequence analysis revealed five open reading frames and two putative cis-acting regions. None appears to code for undesirable phenotypes with regard to food applications. Functional analysis of the replication module showed that only the cis-acting ori region and the repB gene coding for the replication initiator protein were needed for the stable replication and maintenance of pCD4 derivatives in Lactococcus lactis. A two-component food-grade cloning system was derived from the pCD4 replicon. The vector pVEC1, which carries the functional pCD4 replicon, is entirely made up of L. lactis DNA and has no selection marker. The companion pCOM1 is a repB-deficient pCD4 derivative that carries an erythromycin resistance gene as a dominant selection marker. The pCOM1 construct can only replicate in L. lactis if trans complemented by the RepB initiator provided by pVEC1. Since only the cotransformants that carry both pVEC1 and pCOM1 can survive on plates containing erythromycin, pCOM1 can be used transiently to select cells that have acquired pVEC1. Due to the intrinsic incompatibility between these plasmids, pCOM1 can be readily cured from the cells grown on an antibiotic-free medium after the selection step. The system was used to introduce a phage resistance mechanism into the laboratory strain MG1363 of L. lactis and two industrial strains. The introduction of the antiphage barrier did not alter the wild-type plasmid profile of the industrial strains. The phenotype was stable after 100 generations and conferred an effective resistance phenotype against phages of the 936 and c2 species.

Characterization of mesophilic mixed starter cultures used for the manufacture of aged cheddar cheese.

Seventy-one different Lactococcus lactis subsp. cremoris strains were isolated from seven mesophilic mixed starters used in the manufacture of aged Cheddar cheese in Canada. Based on plasmid profiles and growth in milk (with or without glucose, Casamino Acids or both), two mixed starters were highly heterogeneous, containing at least 18 to 24 distinct L. lactis strains. Three mixed starters were comprised of seven to nine strains, whereas two starters were relatively homogeneous, containing two or three strains. Many strains with similar plasmid profiles behaved differently during growth in milk, indicating variability in the phenotypes. Only 20% of the strains could grow in plain milk, whereas 30% could not grow in milk supplemented with glucose and Casamino Acids. Twenty-five lactococcal bacteriophages were also isolated from whey samples with single strains as hosts. Eighteen phages belonged to the 936 species and seven to the c2 species. Thirteen strains were insensitive to all 25 phages. Almost all sensitive strains were phage species-specific. The 936-like phages had a broader host range.

Homologous recombination between a lactococcal bacteriophage and the chromosome of its host strain.

Genetic exchanges constitute a significant means by which bacteriophages acquire novel characteristics. Phages of Lactococcus lactis occupy a particular niche, the dairy factory environment, where their populations are subjected to constant changes. Little is known about the mechanisms of evolution that lead to the genetic diversity of lactococcal phages. In this study, we described two DNA exchanges involving the lytic phage ul36, a member of the P335 species, and its L. lactis host. They occurred by homologous recombination with phage-related sequences present in the host chromosome. Both mutants generated by these recombination events are insensitive to the phage resistance mechanism AbiK and one has a reduced burst size as well as a new origin of replication. We propose that this type of DNA exchange with prophages or remnants of prophages occurs frequently within the P335 species as supported by DNA-DNA comparisons between P335-like phages.

Multiplex PCR for detection and identification of lactococcal bacteriophages.

Three genetically distinct groups of Lactococcus lactis phages are encountered in dairy plants worldwide, namely, the 936, c2, and P335 species. The multiplex PCR method was adapted to detect, in a single reaction, the presence of these species in whey samples or in phage lysates. Three sets of primers, one for each species, were designed based on conserved regions of their genomes. The c2-specific primers were constructed using the major capsid protein gene (mcp) as the target. The mcp sequences for three phages (eb1, Q38, and Q44) were determined and compared with the two available in the databases, those for phages c2 and bIL67. An 86.4% identity was found over the five mcp genes. The gene of the only major structural protein (msp) was selected as a target for the detection of 936-related phages. The msp sequences for three phages (p2, Q7, and Q11) were also established and matched with the available data on phages sk1, bIL170, and F4-1. The comparison of the six msp genes revealed an 82. 2% identity. A high genomic diversity was observed among structural proteins of the P335-like phages suggesting that the classification of lactococcal phages within this species should be revised. Nevertheless, we have identified a common genomic region in 10 P335-like phages isolated from six countries. This region corresponded to orfF17-orf18 of phage r1t and orf20-orf21 of Tuc2009 and was sequenced for three additional P335 phages (Q30, P270, and ul40). An identity of 93.4% within a 739-bp region of the five phages was found. The detection limit of the multiplex PCR method in whey was 10(4) to 10(7) PFU/ml and was 10(3) to 10(5) PFU/ml with an additional phage concentration step. The method can also be used to detect phage DNA in whey powders and may also detect prophage or defective phage in the bacterial genome.