Effect of prenatal exposure to organophosphates and pyrethroid pesticides on neonatal anthropometric measures and gestational age.

Several studies have examined the association between prenatal exposure to organophosphate and pyrethroid pesticides and their impact on foetal growth and newborn anthropometry; however, the available evidence is limited and inconclusive. This study examined whether prenatal organophosphate and pyrethroid pesticide exposure was associated with anthropometric measures at birth (weight, length, head circumference), ponderal index, gestational age, and prematurity in 537 mother-child pairs. These were randomly selected from the 800 pairs participating in the prospective birth cohort GENEIDA (Genetics, early life environmental exposures and infant development in Andalusia). Six non-specific organophosphate metabolites (dialkylphosphates, DAPs), one metabolite relatively specific to chlorpyrifos (3,5,6-trichloro-2-pyridinol, TCPy) and a common metabolite to several pyrethroids (3-phenoxybenzoic acid, 3-PBA) were measured in maternal urine from the 1st and 3rd pregnancy trimesters. Information on anthropometric measures at birth, gestational age and prematurity was retrieved from medical records. The sum on a molar basis of DAPs with methyl (Æ©DMs) and ethyl (Æ©DEs) moieties and the sum of the 6 DAPs metabolites (Æ©DAPs) was calculated for both trimesters of pregnancy. High urinary levels of dimethyl phosphate (DMP) during the 3rd trimester were associated with a decrease in birth weight (ß = -0.24; 95% CI: 0.41; -0.06) and birth length (ß = -0.20; 95% CI: 0.41; 0.02). Likewise, ΣDMs during 3rd trimester were near-significantly associated with decreased birth weight (ß = -0.18; 95% CI: 0.37; 0.01). In turn, increased urinary TCPy during 1st trimester was associated with a decreased head circumference (ß = -0.31; 95% CI: 0.57; -0.06). Finally, an increase in 3-PBA in the 1st trimester was associated with a decreased gestational age (ß = -0.36 95% CI: 0.65-0.08), whereas increased 3-PBA at 1st and 3rd trimester was associated with prematurity. These results indicate that prenatal exposure to organophosphate and pyrethroid insecticides could affect normal foetal growth, shorten gestational age and alter anthropometric measures at birth.

Subphthalocyanine-Diketopyrrolopyrrole Conjugates: 3D Star-Shaped Systems as Non-Fullerene Acceptors in Polymer Solar Cells with High Open-Circuit Voltage.

Invited for this month's cover are the collaborating groups of Prof. Ángela Sastre-Santos, Universidad Miguel Hernández, Prof. Lluis F. Marsal, Universitat Rovira i Virgili and Prof. Tomás Torres, Universidad Autónoma de Madrid, Spain. The cover shows a toy doll holding an umbrella which represents a non-planar, highly conjugated subphthalocyanine-diketopyrrolopyrrole hybrid molecule for non-fullerene organic solar cells. When the sun shines on the umbrella, it absorbs the light, and the doll slides down a polymeric flexible solar cell like a slide, where electrons are produced and electricity flows into the magic wand to illuminate the room. More information can be found in the Full Paper by Ángela Sastre-Santos, Lluis F. Marsal, Tomás Torres, and co-workers.

Efficient charge-transfer from diketopyrrolopyrroles to single-walled carbon nanotubes.

In this contribution, the excited state charge-transfer interactions between single-walled carbon nanotubes (SWCNTs) and a variety of phenyl, 4-bromophenyl, and thiophene substituted diketopyrrolopyrroles (DPPs), is described. Atomic force microscopy (AFM) and aberration corrected high resolution transmission electron microscopy (AC-HRTEM) corroborated the successful formation of DPP/SWCNTs. Steady-state absorption, fluorescence, and Raman spectroscopies all gave insights into the impact on their ground and excited states as well as on the nature of their electronic communication/interaction. Of great value was time-resolved transient absorption spectroscopy on the femto- and nanosecond time-scales; it assisted in deciphering the charge-transfer mechanism from the DPPs to the SWCNT and in analyzing the dynamics thereof with transfer efficiencies of up to 81%. Important confirmation for the one-electron oxidized DPPs came from pulse radiolysis assays with focus on establishing their spectral fingerprints. Our full-fledged work demonstrates that the successful preparation of stable DPP/SWCNTs represents an important step towards establishing them as a viable alternative to porphyrin-based systems in emerging applications such as solar energy conversion.

Subphthalocyanine-Diketopyrrolopyrrole Conjugates: 3D Star-Shaped Systems as Non-Fullerene Acceptors in Polymer Solar Cells with High Open-Circuit Voltage.

Four star-shaped electron acceptors (C1 -OPh, C3 -OPh, C1 -Cl and C3 -Cl) based on a subphthalocyanine core bearing three diketopyrrolopyrrole wings linked by an acetylene bridge have been synthesized. These derivatives feature two different axial substituents (i. e., 4-tert-butylphenoxy (OPh) or chlorine (Cl)) and for each of them, both the C1 and the C3 regioisomers have been investigated. The four compounds exhibit a broad absorption band in the 450-700 nm region, with bandgap values near to 2 eV. These materials were applied in the active layer of inverted bulk-heterojunction polymer solar cells in combination with the donor polymer PBDB-T. Derivatives bearing the OPh axial group showed the best performances, with C1 -OPh being the most promising with a PCE of 3.27 % and a Voc as high as 1.17 V. Despite presenting the widest absorption range, the photovoltaic results obtained with C1 -Cl turned out to be the lowest (PCE=1.01 %).

Interfacial versus Bulk Properties of Hole-Transporting Materials for Perovskite Solar Cells: Isomeric Triphenylamine-Based Enamines versus Spiro-OMeTAD.

Here, we report on three new triphenylamine-based enamines synthesized by condensation of an appropriate primary amine with 2,2-diphenylacetaldehyde and characterized by experimental techniques and density functional theory (DFT) computations. Experimental results allow highlighting attractive properties including solid-state ionization potential in the range of 5.33-5.69 eV in solid-state and hole mobilities exceeding 10-3 cm2/V·s, which are higher than those in spiro-OMeTAD at the same electric fields. DFT-based analysis points to the presence of several conformers close in energy at room temperature. The newly synthesized hole-transporting materials (HTMs) were used in perovskite solar cells and exhibited performances comparable to that of spiro-OMeTAD. The device containing one newly synthesized hole-transporting enamine was characterized by a power conversion efficiency of 18.4%. Our analysis indicates that the perovskite-HTM interface dominates the properties of perovskite solar cells. PL measurements indicate smaller efficiency for perovskite-to-new HTM hole transfer as compared to spiro-OMeTAD. Nevertheless, the comparable power conversion efficiencies and simple synthesis of the new compounds make them attractive candidates for utilization in perovskite solar cells.

Dopant-Free Hole-Transport Materials with Germanium Compounds Bearing Pseudohalide and Chalcogenide Moieties for Perovskite Solar Cells.

Hole-transport materials (HTMs) are key electronic components for the functioning of perovskite solar cells (PSCs) as they extract the photogenerated holes from the perovskite to be transported subsequently to the back electrode while minimizing the loss from electron recombination. Herein, we report the synthesis and characterization of novel germanium-based compounds with [{HC(CMeNAr)2}GeNCS] (2), [{HC(CMeNAr)2}Ge(S)NCS] (3), and [{HC(CMeNAr)2}Ge(Se)NCS] (4) compositions, with Ar = 2,6-iPr2C6H3 and the photovoltaic performance of 3 and 4 that is the same as for HTM in PSC. All compounds displayed excellent thermal properties and an appropriate alignment of energy levels for the perovskite with maximum optical absorption in the near-UV region. As revealed by space-charge limited-current (SCLC) measurements, compounds 3 and 4 have competing hole mobilities of about 1.37 × 10-4 and 4.88 × 10-4 cm2 V-1 s-1, respectively. Upon assessing PSC devices using 3 and 4 with triple-cation perovskite absorber Cs0.05(MA0.17FA0.83)0.95Pb(I0.83Br0.17)3, the power conversion efficiencies (PCEs) were about 13.03 and 9.23%, respectively, both without doping and additives, and were compared with benchmark HTM spiro-OMeTAD (2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene). Quantum chemical calculations with DFT showed that the optoelectronic properties are strongly influenced by the combined contributions of the germanium atom, the pseudohalide moiety (NCS-), and chalcogenides (S2- or Se2-). Fine tuning the electronic properties of germanium is thus a good strategy for the targeted synthesis of potential conducting molecules in PSCs.

Diphenylphenoxy-Thiophene-PDI Dimers as Acceptors for OPV Applications with Open Circuit Voltage Approaching 1 Volt.

Two new perylenediimides (PDIs) have been developed for use as electron acceptors in solution-processed bulk heterojunction solar cells. The compounds were designed to exhibit maximal solubility in organic solvents, and reduced aggregation in the solid state. In order to achieve this, diphenylphenoxy groups were used to functionalize a monomeric PDI core, and two PDI dimers were bridged with either one or two thiophene units. In photovoltaic devices prepared using PDI dimers and a monomer in conjunction with PTB7, it was found that the formation of crystalline domains in either the acceptor or donor was completely suppressed. Atomic force microscopy, X-ray diffraction, charge carrier mobility measurements and recombination kinetics studies all suggest that the lack of crystallinity in the active layer induces a significant drop in electron mobility. Significant surface recombination losses associated with a lack of segregation in the material were also identified as a significant loss mechanism. Finally, the monomeric PDI was found to have sub-optimum LUMO energy matching the cathode contact, thus limiting charge carrier extraction. Despite these setbacks, all PDIs produced high open circuit voltages, reaching almost 1 V in one particular case.

Edge-on and face-on functionalized Pc on enriched semiconducting SWCNT hybrids.

Enriched semiconducting single-walled carbon nanotubes (SWCNT (6,5) and SWCNT (7,6)) and HiPco nanotubes were covalently functionalized with either zinc phthalocyanine or silicon phthalocyanine as electron donors. The synthetic strategy resulted in edge-on and face-on geometries with respect to the phthalocyanine geometry, with both phthalocyanines held by an electronically conducting diphenylacetylene linker. The extent of functionalization in the MPc-SWCNT (M = Zn or Si) donor-acceptor nanohybrids was determined by systematic studies involving AFM, TGA, XPS, optical and Raman techniques. Intramolecular interactions in MPc-SWCNT nanohybrids were probed by studies involving optical absorbance, Raman, luminescence and electrochemical studies. Different degrees of interactions were observed depending on the type of MPc and mode of attachment. Substantial quenching of MPc fluorescence in these hybrids was observed from steady-state and three-dimensional fluorescence mapping, which suggests the occurrence of excited state events. Evidence for the occurrence of excited state charge transfer type interactions was subsequently secured from femtosecond transient absorption studies covering both the visible and near-infrared regions. Furthermore, electron-pooling experiments performed in the presence of a sacrificial electron donor and a second electron acceptor revealed accumulation of one-electron reduced product upon continuous irradiation of the nanohybrids. In such experiments, the ZnPc-SWCNT (6,5) nanohybrid outperformed other nanohybrids and this suggests that this is a superior donor-acceptor system for photocatalytic applications.

Light-Harvesting Phthalocyanine-Diketopyrrolopyrrole Derivatives: Synthesis, Spectroscopic, Electrochemical, and Photochemical Studies.

A new family of light-harvesting zinc phthalocyanine (ZnPc)-diketopyrrolopyrrole (DPP) hybrids have been synthesized and characterized. The absorption spectral measurements showed that the major absorptions of DPP (450-600 nm) are complementary to those of zinc phthalocyanine (300-400 and 600-700 nm). Therefore, the designed hybrids absorb over a broad range in the visible region. The geometric and electronic structures of the dyads were probed by initio B3LYP/6-311G methods. The majority of the HOMOs were found to be located on the ZnPc, while the majority of the LUMOs were on the DPP units. The DPP units serve as the antenna, which upon excitation undergo efficient singlet-singlet energy transfer to the attached ZnPc units. The formed singlet ZnPc, in turn, donates its electron to the electron-deficient DPP forming the low-lying radical ion pairs ZnPc.+ -DPP.- (energy=1.44-1.56 eV as calculated from the electrochemical measurements). The excited-state events were confirmed by using a transient absorption technique in the picosecond-microsecond time range, as well as a time-resolved emission technique. The rates of energy transfer from the singlet DPP to ZnPc were found to be extremely fast >1010  s-1 , while the rates of electron transfer from the singlet excited state of ZnPc to DPP were found to be 3.7-6.6×109  s-1 .