RESUMEN
The adsorption of dyes using 39 adsorbents (16 kinds of agro-wastes) were modeled using random forest (RF), decision tree (DT), and gradient boosting (GB) models based on 350 sets of adsorption experimental data. In addition, the correlation between variables and their importance was applied. After comprehensive feature selection analysis, five important variables were selected from nine variables. The RF with the highest accuracy (R2 = 0.9) was selected as the best model for prediction of adsorption capacity of agro-waste using the five selected variables. The results suggested that agro-waste characteristics (pore volume, surface area, agro-waste pH, and particle size) accounted for 50.7% contribution for adsorption efficiency. The pore volume and surface area are the most important influencing variables among the agro-waste characteristics, while the role of particle size was inconspicuous. The accurate ability of the developed models' prediction could significantly reduce experimental screening efforts, such as predicting the dye removal efficiency of agro-waste activated carbon according to agro-waste characteristics. The relative importance of variables could provide a right direction for better treatments of dyes in the real wastewater.
RESUMEN
Bus services naturally tend to be unstable and are not always capable of adhering to schedules without control strategies. Therefore, bus users and bus service providers face travel time variation and irregularity. After a comprehensive review of the literature, a significant gap was recognized in the field of public transportation reliability. According to literature, there is no consistency in reliability definition and indicators. Companies have their own definition of bus service reliability, and they mostly neglect the passengers' perspective of reliability. Therefore, four reliability indicators were selected in this study to fill the gap in the literature and cover both passengers' and operators' perceptions of reliability: waiting time and on-board crowding level from passengers' perspective, and headway regularity index at stops (HRIS) and bus bunching/big gap percentage from operators' perspective. The primary objective of this research is to improve the reliability of high frequency of bus service and simulation tools currently being used by the public transportation companies. Therefore, a simulation model of bus service was developed to study the strategies to alleviate it. Four different types of strategies were selected and implemented according to Route U32 (Kuala Lumpur) specifications. Model out-put showed that control strategies such as headway-based dispatching could significantly improve headway regularity by almost 62% and the waiting time by 51% on average. Both holding strategies at key stops (previous and Prefol holding) have shown an almost similar impact on reliability indicators. Waiting time was reduced by 44% and 43% after the previous and Prefol Headway strategies were adopted, respectively. However, the implementation of the component of headway-based strategies at the terminal and key stops showed the best impact on reliability, in terms of passenger waiting time. Waiting time and excess waiting time were both significantly reduced by 52.86% and 81.44%, respectively. Nevertheless, the strategies did not show any significant positive effect on the level of crowding during morning peak hours.