Nutritional profiling, fiber content and in vitro bioactivities of wheat-based biscuits formulated with novel ingredients.

This study evaluated the nutritional profile and fiber content of innovative formulations of wheat-based biscuits enriched with chia seeds, carob flour and coconut sugar. The in vitro antioxidant, cytotoxic, anti-inflammatory and antimicrobial activities were also investigated to understand the potential health advantages of the incorporation of these new ingredients. The novel biscuits demonstrated significant improvements in protein and mineral content, with increases of 50% and 100% in chia biscuits, and up to 20% and 40% in carob biscuits, respectively. Fiber also notably increased, particularly in samples containing 10% carob flour, which increased four times as compared to wheat-based samples. The new ingredients exhibited antibacterial and antifungal activity, particularly against Yersinia enterocolitica (minimum inhibitory concentration 1.25 mg mL-1 in coconut sugar) and Aspergillus fumigatus (minimum inhibitory concentration/minimum fungicidal concentrations 2.5/5 mg mL-1 in chia seeds). However, the final biscuits only displayed antifungal properties. Carob flour and chia seeds had a remarkably high capacity to inhibit the formation of TBARS and promoted greater antioxidant activity in biscuit formulations, with EC50 values decreasing from 23.25 mg mL-1 (control) to 4.54 mg mL-1 (15% defatted ground chia seeds) and 1.19 mg mL-1 (10% carob flour). Only chia seeds exhibited cellular antioxidant, anti-inflammatory and cytotoxic activity, attributes that were lost when seeds were added into the biscuits. These findings highlight the potential health benefits of these ingredients, particularly when incorporated in new wheat-based formulations.

Assessment of dietary acrylamide exposure in children attending Spanish school canteens using the duplicate diet method.

Acrylamide is a carcinogenic chemical contaminant formed in heat-treated foods. In this study, a duplicate diet method was used to evaluate the acrylamide content of foods/meals served at breakfast and lunch in two Spanish school canteens. The dietary acrylamide intake in students was estimated within lower bound (LB) and upper bound (UB) scenarios. Biscuits exhibited the highest acrylamide values, exceeding the benchmark level established by the European Regulation 2017/2158 (350 µg/kg), followed by main courses such as stews, side dishes and bread. In the LB scenario, breakfasts accounted for the major contributors to the daily acrylamide intake (73.3%). However, lunches were the main responsible in the UB scenario (65.4%). Acrylamide exposure was estimated for three age ranges: 3-5y pre-school children (0.59 and 0.92 µg/kg body weight/day), 6-9y children (0.43 and 0.67 µg/kg body weight/day) and 10-12y early adolescents (0.28 and 0.44 µg/kg body weight/day). Margins of exposure for neoplastic effects ranged between 144 and 1026, which is below the reference of 10,000, indicating a health concern. The findings reveal that any diet, even one that is balanced, varied and contains foods low in acrylamide, involves an additive exposure to the contaminant that should be considered when conducting acrylamide exposure risk assessments.

Risk/Benefit Evaluation of Chia Seeds as a New Ingredient in Cereal-Based Foods.

Chia seed (Salvia hispanica L.) is a food rich in protein, fiber, polyunsaturated fatty acids and antioxidants. Consequently, its incorporation in food formulations may be desirable from a nutritional and healthy point of view. However, there is concern regarding the formation of process contaminants when they are subjected to thermal processing. The objective of this study was to incorporate different amounts of ground chia seeds in a biscuit model to evaluate the effect on the antioxidant capacity and formation of acrylamide and furfurals. Seven standard "Maria-type" biscuit formulations were prepared, replacing wheat flour with different amounts of ground chia seeds (defatted and non-defatted), from 0% (control biscuit) to 15% (respect to total solids in the recipe). Samples were baked at 180 °C for 22 min. Compared with the control biscuit, chia formulations increased the content of nutrients, antioxidant capacity (ABTS) and phenolic compounds (Folin-Ciocalteau method) but also doubled acrylamide levels and even raised more than 10 times furanic compound concentrations. Results indicate that the use of chia seeds as ingredients in new cereal-based formulations would improve the nutritional profile but also increase the occurrence of chemical process contaminants. This paradox should be carefully considered in the context of risk/benefit analysis.

Formation of process contaminants in commercial and homemade deep-fried breadcrumbs.

Breading is a culinary technique widespread throughout the world. Deep-frying breaded foods forms a palatable crust but also promotes the formation of compounds of toxicological relevance. The influence of the composition of breadcrumbs on the risk associated with the formation of acrylamide, hydroxymethylfurfural (HMF), and furfural was investigated in a deep-fried breadcrumb coating model. Commercial (CBC) and homemade (HBC) wheat-based breadcrumbs were characterized by the reducing sugars and the asparagine content among other parameters (moisture, pH, and CIELab color). The formation of process contaminants in fried breadcrumbs were not influenced by their initial content, but they were affected by the precursors level. The HMF content was significantly higher (1.4 times) in fried HBC (172 mg/kg) than in CBC (120 mg/kg). By contrast, the acrylamide content was 3 times higher in fried CBC (332 µg/kg) than in HBC (111 µg/kg). Multivariate analysis shows that asparagine is the limiting factor for acrylamide formation, and the reducing sugar content is the main determinant for the formation of furanic compounds. A signal value of 463 µg/kg is proposed for the acrylamide content in the coating of deep-fried breaded foods. The reducing sugars and asparagine content in breadcrumb coatings should be considered when designing breaded foods, thereby reducing the formation and consequently the dietary exposure to these potentially harmful compounds.

Overlapping versus single long stents in long chronic total occlusions: insights of the Iberian CTO Registry.

BACKGROUND: It is unknown whether the availability of long drug-eluting stents modify the PCI strategy of long CTO. To describe the contemporary PCI strategy of long chronic total occlusions (CTO) using overlapping (OS) or single long stents (SS) and to analyze its results. METHODS: 2842 consecutive CTO PCIs were included. Those with an occlusion length ≥20 mm in which ≥1 drug eluting stent (DES) was implanted were analyzed. We compared procedural characteristics and clinical outcomes of CTO treated with OS or SS. RESULTS: 1088 CTO PCIs were analyzed (79.9% males; 64.7±10.6 years). Mean J-score was 2.8±0.9. A SS was used in 38.5% of cases and OS in 61.5%. Total stent length was 64.1±29.9 mm; it was higher in the OS group (OS: 79.9±25.5 mm vs. SS: 38.3±14.7 mm; P<0.0001). Mean number of stents in the OS group was 2.3±1. Very long stents (≥40 mm) were used in 27.4% of cases, more frequently in the OS group (OS:32.4% vs. SS:19.3%; P<0.0001). After a mean follow-up of 19±15.9 months, the rate of adverse events (MACE) was 2% (cardiac death: 1.6%, myocardial infarction: 1.6%, target lesion revascularization: 1.9% and stent thrombosis: 0.18%) with no significant differences between both groups. Overlapping was not an independent predictor of MACE. CONCLUSIONS: In long CTO PCIs, OS is more frequently used than single stenting, especially in more complex procedures. Clinical outcomes at a mid-term follow-up are favorable. Using newer generation DES, overlapping was not an independent predictor of MACE; however, a trend toward a higher event rate was observed in the OS group.

Formation of acrylamide during the roasting of chia seeds (Salvia hispanica L.).

Chia is a novel food rich in health-promoting constituents. There is concern regarding the formation of process contaminants when subjected to thermal processing. Acrylamide formation in chia seeds under different roasting conditions (160-200 °C/5-30 min) and formats (whole seeds and ground seeds) was investigated. Acrylamide increased with the intensity of the thermal treatment until a maximum at 180 °C/15 min where levels of precursors were significantly reduced. The fate of acrylamide formation also depended on the physical integrity of the chia seed. Acrylamide formed rapidly on the coat of the seed but represents only 20-25 % of the total. Acrylamide was generated progressively in the inner part of the cell and efficiently retained by the pericarp. The particle size and integrity of chia seeds should be considered in food applications subjected to thermal treatment and grinding or the addition of ground seeds should be revised to reduce the exposure of acrylamide to consumers.

Dietary Exposure to Acrylamide in Spanish University Canteens by the Duplicate Diet Method.

During the university period, many students adopt new dietary patterns, sometimes including the excessive consumption of highly processed foods, which can expose them to process contaminants such as acrylamide. This research aimed to evaluate the dietary exposure to acrylamide of Spanish university students in their campus canteens using the duplicate diet method, and to estimate the associated health risks based on their food consumption habits. Apart from potato-based foods, the analysed food/meals contained non-detectable or low levels of acrylamide (<63 µg/kg). Two exposure scenarios were considered, depending on whether students selected salad (lowest exposure) or processed potatoes (highest exposure) as side dishes. The frequent consumption of processed potatoes could increase acrylamide intake from 6.5 to 26.4 µg/day. Due to their lower body weight, women had a higher risk of acrylamide exposure in both scenarios. The margin of exposure (MOE) values for neoplastic effects indicated high levels of health concern, even only considering the main meal of the day. Furthermore, the risk of acrylamide exposure could increase by more than four times depending on the side dish selected by the students. This research highlights the need to promote healthy dietary habits among young people, encouraging the selection of safer food options in terms of food processing contaminants.

Caffeine, D-glucuronolactone and Taurine Content in Energy Drinks: Exposure and Risk Assessment.

The consumption of energy drinks (EDs) is increasing globally while the evidence and concern about the potential health risks are also growing. Caffeine (generally 32 mg/100 mL) together with a wide variety of other active components such as taurine (usually 4000 mg/L) and D-glucuronolactone (generally 2400 mg/L) are the main ingredients of EDs. This study aims to assess the exposures to caffeine, taurine and D-glucuronolactone from EDs in various consumption scenarios and consumer profiles and to characterize the risks by evaluating caffeine and taurine intakes with their reference values and by calculating the margin of safety (MOS) for D-glucuronolactone. While the exposure assessment results showed that caffeine intakes from EDs ranged from 80 to 160 mg (1.14-4 mg/kg b.w.) for the considered scenarios, the risk characterization estimated some risks that could be managed with consumption recommendations such as limiting EDs in 40, 60 and 80 kg b.w. consumers to 175, 262.5 and 350 mL, respectively, to prevent sleep disturbances and to 375, 562.5 and 750 mL to prevent general caffeine adverse health risks, respectively. Dietary exposure to D-glucuronolactone from EDs ranged from 600 to 1200 mg (7.5-30 mg/kg b.w.). As D-glucuronolactone MOS ≥ 100 is only observed when EDs consumption is limited to 250 mL, for individuals weighing above 60 kg, some risks were observed in some of the studied scenarios. A taurine exposure from EDs varied from 1000 to 2000 mg (12.5-50 mg/kg b.w.) and consumptions over 500 mL were estimated to generate intakes above the reference value. In conclusion, the management of these risks requires a European legal framework for EDs with maximum limits for the active components, volume size limitations and labeling improvements along with the development of education and awareness programs and risk communication actions in collaboration with the industry and society.

Does environmental risk really change in abandoned mining areas in the medium term when no control measures are taken?

Studies regarding how environmental risk evolves in abandoned mining areas in the medium term have been seldom carried out. The answer to this question is not obvious despite it is essential in order to evaluate the need to take urgent control measures in these areas. Fifty-two samples corresponding to soils (from natural pasture and arable lands) and mine tailings were collected in the surroundings of an old Spanish Pb/Zn mine (San Quintín, Central Spain). Current concentrations of pseudo-total and available metal (loid)s (Pb, Zn, Cd, Cu, As and Ag) were determined and the environmental risk assessment (ERA) was conducted with these data and those corresponding to a sampling previously carried out in 2006. ERA was carried out by calculating the geoaccumulation index (Igeo), the pollution load index (PLI) and the potential ecological risk index (PER). Results demonstrated that Pb and Zn concentrations have increased in the soils of the plots surrounding the mining areas causing a moderate rise in most of the determined pollution indices between 2006 and 2020. It was especially significant in the pastureland areas, with increases up to 17% in the number of soil samples that reached the highest risk classification in 2020 as compared to those taken in 2006. The results obtained here demonstrate that the environmental risk can actually increase in a continuous way in abandoned mining areas despite the closure of the mining operation and the effect of the possible natural attenuation.

Acrylamide Exposure from Common Culinary Preparations in Spain, in Household, Catering and Industrial Settings.

In 2019, the European Commission recommended monitoring the presence of acrylamide in certain foods not included in Regulation 2158/2017, to consider other sources of exposure to the contaminant. In the present study, eleven groups of processed foods commonly consumed in Spain were classified, according to their food matrix, into potato-based food, cereal-based food and food based on cereal mixed with meat, fish or vegetables. Samples were collected from three different settings: household, catering services and industrial origin, to evaluate the influence of the food preparation site on acrylamide formation. The highest concentrations of acrylamide were observed in chips (French fries), especially those prepared at home. Although at lower levels, all the other foods also contained significant concentrations of acrylamide, confirming the need to control its content in foods not included in the EU regulation. Industrially processed foods made a lower contribution to acrylamide exposure, probably due to the more stringent controls exercised on culinary processes in this context. The higher levels recorded for households and catering services highlight the need for greater awareness of culinary processes and for measures to be adopted in these settings to limit the formation of acrylamide in food preparation.

An Old Technique with A Promising Future: Recent Advances in the Use of Electrodeposition for Metal Recovery.

Although the first published works on electrodeposition dates from more than one century ago (1905), the uses of this technique in the recovery of metals are attracting an increasing interest from the scientific community in the recent years. Moreover, the intense use of metals in electronics and the necessity to assure a second life of these devices in a context of circular economy, have increased the interest of the scientific community on electrodeposition, with almost 3000 works published per year nowadays. In this review, we aim to revise the most relevant and recent publications in the application of electrodeposition for metal recovery. These contributions have been classified into four main groups of approaches: (1) treatment and reuse of wastewater; (2) use of ionic liquids; (3) use of bio-electrochemical processes (microbial fuel cells and microbial electrolysis cells) and (4) integration of electrodeposition with other processes (bioleaching, adsorption, membrane processes, etc.). This would increase the awareness about the importance of the technology and would serve as a starting point for anyone that aims to start working in the field.

Effect of consumer's decisions on acrylamide exposure during the preparation of French fries. Part 2: Color analysis.

Two observational tests were designed to investigate the influence of consumer decisions during the preparation of French fries from fresh potatoes on acrylamide formation. In both tests, color was of paramount importance to volunteers with regards to the decision to stop the frying process. CIE-Lab* color parameters and visual color assessments of French fries were associated with general acrylamide content and its classification according to the EU benchmark levels (BL, 500 µg/kg). Binary logistic regression analysis revealed that color parameter a* was the main factor in determining the probability of acrylamide content being above BL, regardless of the culinary practices applied. A cut-off of 0.855 for a* produced the greatest sensitivity (81.1%) and specificity (99.9%) for classifying samples with acceptable BL of acrylamide content. An increase of one unit of a* more than quadruple the risk of acrylamide content not falling within BL. When no external color reference was provided, volunteers misclassified 33.6% of fries as having a golden color. Harmonized criteria based on a reference color chart that indicates a golden color are necessary for producing fries with reduced acrylamide contents and, in this way, limit the risk of exposure to acrylamide in domestic settings.

Effect of consumer's decisions on acrylamide exposure during the preparation of French fries. part 1: Frying conditions.

Variability in home-cooking practices affects dietary exposure to acrylamide, limiting risk evaluation. Two observational tests (controlled and randomized) involving 127 volunteers was designed to investigate the influence of consumer decisions on acrylamide formation during the preparation of French fries. Consumer practices were recorded during pre-frying, frying and post-frying stages. Reducing sugar content, asparagine, moisture, acrylamide, moisture, weight loss and color were evaluated. In the controlled assay, mean acrylamide content was 508 µg/kg and volunteers took a mean frying time of 91.9 s (87.5-96.4, C.I. 95%). The narrow confidence interval of 8.9 s represented an increase of 120 µg/kg in the acrylamide content of the fried potato. Average acrylamide content in the randomized assay (215 µg/kg, 150-280 µg/kg, C.I. 95%) was significantly lower than in the controlled assay. Amongst the culinary practices applied for the potato variety evaluated, washing of the potato strips significantly reduced acrylamide content in French fries. The percentage of samples with acrylamide lower than the benchmark value (500 µg/kg) was 54% and 93% for the controlled and randomized assays, respectively. Estimated average dietary exposure to acrylamide from French fries in adults was 5.65 µg/day, which corresponds to a margin of exposure of 2105 for carcinogenicity.

Introduction to the Special Issue: New Frontiers in Acrylamide Study in Foods-Formation, Analysis and Exposure Assessment.

Acrylamide is a chemical contaminant that naturally originates during the thermal processing of many foods. Since 2002, worldwide institutions with competencies in food safety have promoted activities aimed at updating knowledge for a revaluation of the risk assessment of this process contaminant. The European Food Safety Authority (EFSA) ruled in 2015 that the presence of acrylamide in foods increases the risk of developing cancer in any age group of the population. Commission Regulation (EU) 2017/2158 establishes recommended mitigation measures for the food industry and reference levels to reduce the presence of acrylamide in foods and, consequently, its harmful effects on the population. This Special Issue explores recent advances on acrylamide in foods, including a novel insight on its chemistry of formation and elimination, effective mitigation strategies, conventional and innovative monitoring techniques, risk/benefit approaches and exposure assessment, in order to enhance our understanding for this process contaminant and its dietary exposure.

Are Household Potato Frying Habits Suitable for Preventing Acrylamide Exposure?

A survey was conducted of 730 Spanish households to identify culinary practices which might influence acrylamide formation during the domestic preparation of french fries and their compliance with the acrylamide mitigation strategies described in the 2017/2158 Regulation. Spanish household practices conformed with the majority of recommendations for the selection, storing and handling of potatoes, with the exception of soaking potato strips. Olive oil was the preferred frying oil (78.7%) and frying pans were the most common kitchen utensils used for frying (79.0%), leading to a higher oil replacement rate than with a deep-fryer. Although frying temperature was usually controlled (81.0%), participants were unaware of the maximum temperature recommended for preventing acrylamide formation. For french fries, color was the main criteria when deciding the end-point of frying (85.3%). Although a golden color was preferred by respondents (87.3%), color guidelines are recommended in order to unify the definition of "golden." The results conclude that habits of the Spanish population are in line with recommendations to mitigate acrylamide during french fry preparation. Furthermore, these habits do not include practices that risk increasing acrylamide formation. Nevertheless, educational initiatives tailored towards consumers would reduce the formation of this contaminant and, consequently, exposure to it in a domestic setting.

Association between Heat-Induced Chemical Markers and Ultra-Processed Foods: A Case Study on Breakfast Cereals.

Nutritional composition and neo-formed contaminant content in ultra-processed foods, amongst other factors, may contribute to increasing overall risk of non-communicable diseases and cancer. Commercial breakfast cereals (n = 53) were classified according to the NOVA approach as un-/minimally processed (NOVA-1, 11%), processed (NOVA-3, 30%), and ultra-processed (NOVA-4, 59%) foods. Acrylamide and hydroxymethylfurfural (HMF) content as heat-induced chemical markers was taken from our research team database. The NutriScore was used as the nutritional profiling system. Samples were distributed between groups A (19%), B (13%), C (38%), and D (30%). No statistically significant differences in acrylamide and HMF were found across the NutriScore groups. Sugar content was the only nutritional descriptor found to be significantly different between processed (11.6 g/100 g) and ultra-processed (23.1 g/100 g) breakfast cereal groups. Sugar content correlated with acrylamide (p < 0.001) and HMF (p < 0.0001). Acrylamide and HMF contents were not significantly higher in the NOVA-4 group when compared with the NOVA-3 group. However, trends towards higher acrylamide and HMF content are observed, amounting to a change of 75 µg/kg and 13.3 mg/kg in processed breakfast cereals, and 142 µg/kg and 32.1 mg/kg in ultra-processed breakfast cereals, respectively. Thus, the NOVA classification may not reflect the extent of the thermal treatment applied to the breakfast cereal but the type and amount of ingredients incorporated. Ultra-processed breakfast cereal does not predict significantly higher toxicological concern based on acrylamide content than processed breakfast cereals; a clear trend is seen whose contributing factors should be further studied.

Formation of Acrylamide and other Heat-Induced Compounds during Panela Production.

Non-centrifugal cane sugar (panela) is an unrefined sugar obtained through intense dehydration of sugarcane juice. Browning, antioxidant capacity (measured by ABTS (2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) assay and total phenolic content) and the formation of acrylamide and other heat-induced compounds such as hydroxymethylfurfural (HMF) and furfural, were evaluated at different stages during the production of block panela. Values ranged between below the limit of quantitation (LOQ)-890 µg/kg, < LOQ-2.37 mg/kg, < LOQ-4.5 mg/kg, 0.51-3.6 Abs 420 nm/g, 0.89-4.18 mg gallic acid equivalents (GAE)/g and 5.08-29.70 µmol TE/g, for acrylamide, HMF, furfural, browning, total phenolic content and ABTS (all data in fresh weight), respectively. Acrylamide significantly increased as soluble solid content increased throughout the process. The critical stages for the formation of acrylamide, HMF and furfural were the concentration of the clarified juice in the concentration stage to get the panela honey and the final stage. Similar trends were observed for the other parameters. This research concludes that acrylamide, HMF and furfural form at a high rate during panela processing at the stage of juice concentration by intense evaporation. Therefore, the juice concentration stage is revealed as the critical step in the process to settle mitigation strategies.

Team Efficiency in Organizations: A Group Perspective on Initiative.

Organizational research has shown that personal initiative is related to both climate for initiative and work engagement. Yet little is known about what happens to this relationship once the focus shifts to the team level. When organizational and team goals are involved this renders the relationship more complex, and team identification and organizational identification are likely to be key to understanding it. In this paper we develop a model to deal with these complexities. This predicts (a) that team identification will impact on team initiative through team work engagement while (b) organizational identification will impact on team initiative through climate for initiative. It is also expected that team initiative will, in turn, impact on team productivity, and on radical innovation as evaluated by the team leader. This model was tested in a field study with 327 participants of 76 workteams belonging to 50 organizations. Results of SEM and regression analysis supported our main hypotheses. Findings showed that initiative is related to performance and also underline the importance of initiative at a team level. At the same time they suggest that to develop teams with high levels of initiative it is important to promote both organizational and team identification.

How Far is the Spanish Snack Sector from Meeting the Acrylamide Regulation 2017/2158?

In 2017, the European Commission published Regulation 2017/2158 establishing mitigation measures and benchmark levels to reduce acrylamide in foods. Acrylamide was determined in seventy potato crisp samples commercialized in Spain. The aim was to update knowledge about the global situation in the snack sector and evaluate the effectiveness of mitigation strategies applied, especially since the publication of the Regulation. Results were compared with data previously published in 2004, 2008, and 2014, assessing the evolution over recent years. Average acrylamide content in 2019 (664 µg/kg, range 89-1930 µg/kg) was 55.3% lower compared to 2004, 10.3% lower compared to 2008 and practically similar to results from 2014. Results support the effectiveness of mitigation measures implemented by Spanish potato crisp manufacturers. However, 27% of samples exhibited concentrations above the benchmark level established in the Regulation (750 µg/kg), which suggests that efforts to reduce acrylamide formation in this sector must be continued. Besides the variability seen between samples, acrylamide significantly correlated with the color parameter a*, which enables discrimination of whether potato crisps contain above or below benchmark content. The calculated margin of exposure for carcinogenicity was below the safety limit, which should be considered from a public health point of view.