Experimental validation off-line a nonlinear controller for removal of chromium using non-living cells of Yarrowia lipolytica.

The removal of hexavalent chromium [Cr (VI)] using non-living cells of Yarrowia lipolytica was investigated. Batch and continuous studies on removal of Cr (VI) achieved 97% and 99% removal from aqueous phase, respectively. The specific uptake values at pH of 2 in batch process were 40.73 ± 1.3 mg/g and 30.09 ± 0.23 mg/g on non-living cells, when 100 and 200 mg/L of metal Cr (VI) concentrations were used. In order to investigate the regulation of Cr (VI) under continuous operation based on reaction volume numerically a new class of feedback controller from structure polynomial was designed. The proposed methodology was used to an experimentally kinetic model for a removal Cr (VI) from Yarrowia lipolytica biomass was showed satisfactory closed-loop performance the proposed controller. Starting from an off-line optimization performed in simulation, we present the controller implementation, focussing on the methodology required to could be suitable for implementation in real time. In our experimental results, we highlight some discrepancies between simulation and reality despite these differences, the controller managed to perform convergence to removal Cr (VI). Finally, the results validated with off-line samples suggest that the proposed control could be suitable for in application in potential scenarios for wastewater treatment.

Production and physicochemical characterization of chitosan for the harvesting of wild microalgae consortia.

The use of chitosan to harvest microalgae is a strategic step that seeks to reach an economically competitive price to recover lipids, proteins, and pigments. The aim of the present work was to design low-molecular-weight chitosan from shrimp shells and its physicochemical characterization, to be used for the harvesting of wild microalgae consortia. The chitosan was obtained by chemical deacetylation of shrimp shells, and physicochemical characterization was made using the instrumental methods DSC, TGA, X-ray, FTIR, and SEM. The harvesting of wild microalgae consortia was performed by the jar test method. The obtained chitosan had a low molecular weight (169 KDa), a deacetylation degree of 83 %, a decomposition temperature (TD) of 280 °C, and a crystallinity of 38.2 %. The microalgae genera found in the consortium were Scenedesmus sp., Chlorella sp., Schroderia sp., and Chlamydomonas sp. The microalgae removal efficiency of the chitosan was 99.2 % with 20 mg L-1.