RESUMEN
The scum accumulation inside gas-solid-liquid separators (GSL) is one of the main limitations of upflow anaerobic sequencing batch (UASB) reactors during treatment of domestic sewage. Although this type of reactor can be equipped with devices that periodically remove scum, this solution has been proved to be very expensive in addition to being inefficient when discharging procedures are not correctly performed. The main goal of this study was to investigate the performance of a modified UASB reactor concept with a GSL separator which promotes continuous scum discharge to the settling compartment. Furthermore, this proposal was compared with a conventional UASB reactor which was used as control. Both reactors in demo-scale were fed with domestic wastewater and scum production was measured. The results demonstrated volumetric reduction of 50%, and 75% reduction in the mass of total solids in the modified reactor. Additionally, the amount of biogas recovered from the modified reactor was higher than the amount that the control reactor recovered. Therefore, the proposed modification has been proved to be effective, bringing new possibilities to the GSL project.
Asunto(s)
Reactores Biológicos , Aguas del Alcantarillado , Eliminación de Residuos Líquidos/métodos , Anaerobiosis , Aguas ResidualesRESUMEN
Evaluation of transgenic crops under field conditions is a fundamental step for the production of genetically engineered varieties. In order to determine if there is pollen dispersal from transgenic to nontransgenic soybean plants, a field release experiment was conducted in the Cerrado region of Brazil. Nontransgenic plants were cultivated in plots surrounding Roundup Ready transgenic plants carrying the cp4 epsps gene, which confers herbicide tolerance against glyphosate herbicide, and pollen dispersal was evaluated by checking for the dominant gene. The percentage of cross-pollination was calculated as a fraction of herbicide-tolerant and -nontolerant plants. The greatest amount of transgenic pollen dispersion was observed in the first row, located at one meter from the central (transgenic) plot, with a 0.52% average frequency. The frequency of pollen dispersion decreased to 0.12% in row 2, reaching 0% when the plants were up to 10 m distance from the central plot. Under these conditions pollen flow was higher for a short distance. This fact suggests that the management necessary to avoid cross-pollination from transgenic to nontransgenic plants in the seed production fields should be similar to the procedures currently utilized to produce commercial seeds.
Asunto(s)
Flujo Génico , Glycine max/genética , Plantas Modificadas Genéticamente/genética , Brasil , Cruzamientos Genéticos , Genes Dominantes , Genes de Plantas , Ingeniería Genética , Modelos Genéticos , Plantas/genética , Polen/metabolismo , Análisis de Regresión , Semillas/metabolismo , TransgenesRESUMEN
Evaluation of transgenic crops under field conditions is a fundamental step for the production of genetically engineered varieties. In order to determine if there is pollen dispersal from transgenic to nontransgenic soybean plants, a field release experiment was conducted in the Cerrado region of Brazil. Nontransgenic plants were cultivated in plots surrounding Roundup Ready transgenic plants carrying the cp4 epsps gene, which confers herbicide tolerance against glyphosate herbicide, and pollen dispersal was evaluated by checking for the dominant gene. The percentage of cross-pollination was calculated as a fraction of herbicide-tolerant and -nontolerant plants. The greatest amount of transgenic pollen dispersion was observed in the first row, located at one meter from the central (transgenic) plot, with a 0.52% average frequency. The frequency of pollen dispersion decreased to 0.12% in row 2, reaching 0% when the plants were up to 10 m distance from the central plot. Under these conditions pollen flow was higher for a short distance. This fact suggests that the management necessary to avoid cross-pollination from transgenic to nontransgenic plants in the seed production fields should be similar to the procedures currently utilized to produce commercial seeds.