An Evaluation of Kinetic Models in the Biodesulfurization of Synthetic Oil by Rhodococcus erythropolis ATCC 4277.

Biodesulfurization is an eco-friendly technology applied in the removal of sulfur from fossil fuels. This technology is based on the use of microorganisms as biocatalysts to convert the recalcitrant sulfur compounds into others easily treatable, as sulfides. Despite it has been studied during the last decades, there are some unsolved questions, as per example the kinetic model which appropriately describes the biodesulfurization globally. In this work, different kinetic models were tested to a batch desulfurization process using dibenzothiophene (DBT) as a model compound, n-dodecane as organic solvent, and Rhodococcus erythropolis ATCC 4277 as biocatalyst. The models were solved by ODE45 function in the MATLAB. Monod model was capable to describe the biodesulfurization process predicting all experimental data with a very good fitting. The coefficients of determination achieved to organic phase concentrations of 20, 80, and 100 % (v/v) were 0.988, 0.995, and 0.990, respectively. R. erythropolis ATCC 4277 presented a good affinity with the substrate (DBT) since the coefficients of saturation obtained to reaction medium containing 20, 80, and 100 % (v/v) were 0.034, 0.07, and 0.116, respectively. This kinetic evaluation provides an improvement in the development of biodesulfurization technology because it showed that a simple model is capable to describe the throughout process.

Desulfurization and denitrogenation of heavy gas oil by Rhodococcus erythropolis ATCC 4277.

Some of the noxious atmospheric pollutants such as nitrogen and sulfur dioxides come from the fossil fuel combustion. Biodesulfurization and biodenitrogenation are processes which remove those pollutants through the action of microorganisms. The ability of sulfur and nitrogen removal by the strain Rhodococcus erythropolis ATCC 4277 was tested in a biphasic system containing different heavy gas oil concentrations in a batch reactor. Heavy gas oil is an important fraction of petroleum, because after passing through, the vacuum distillation is incorporated into diesel oil. This strain was able to remove about 40% of the nitrogen and sulfur present in the gas heavy oil. Additionally, no growth inhibition occurred even when in the presence of pure heavy gas oil. Results present in this work are considered relevant for the development of biocatalytic processes for nitrogen and sulfur removal toward building feasible industrial applications.