RESUMEN
Vacancy-ordered halide perovskites have received great interest in optoelectronic applications. In this work, we report the novel inorganic halide Cs10MnSb6Cl30 with a distinctive 10H (10-layer hexagonal) perovskite polytype structure with (hcccc)2 stacking. Cs10MnSb6Cl30 has 30% B-site vacancies ordered at both corner- and face-sharing sites, resulting in [MnSb6Cl30]10-n columns, i.e., a reduction of octahedral connectivity to 1D. This results in enhanced photoluminescence in comparison to the previously reported 25% vacancy-ordered 3C polytype Cs4MnSb2Cl12 with 2D connectivity. This demonstrates not only the existence of the 10H perovskite structure in halides but also demonstrates the degree of B-site deficiency and stacking sequence variation as a direction to tune the optical properties of perovskite polytypes via vacancy rearrangements.
RESUMEN
Two-dimensional (2D) organic-inorganic hybrid copper halide perovskites have drawn tremendous attention as promising multifunctional materials. Herein, by incorporating ortho-, meta-, and para-chlorine substitutions in the benzylamine structure, we first report the influence of positional isomerism on the crystal structures of chlorobenzylammonium copper(II) chloride perovskites A2CuCl4. 2D polar ferromagnets (3-ClbaH)2CuCl4 and (4-ClbaH)2CuCl4 (ClbaH+ = chlorobenzylammonium) are successfully obtained. They both adopt a polar monoclinic space group Cc at room temperature, displaying significant differences in crystal structures. In contrast, (2-ClbaH)2CuCl4 adopts a centrosymmetric space group P 21/ c at room temperature. This associated structural evolution successfully enhances the physical properties of the two polar compounds with high thermal stability, discernible second harmonic generation (SHG) signals, ferromagnetism, and narrow optical band gaps. These findings demonstrate that the introduction of chlorine atoms into the interlayer organic species is a powerful tool to tune crystal symmetries and physical properties, and this inspires further exploration of designing high-performance multifunctional copper-based materials.
RESUMEN
We present the influence of positional isomerism on the crystal structure of fluorobenzylammonium copper(II) chloride perovskites A2CuCl4 by incorporating ortho-, meta-, and para-fluorine substitution in the benzylamine structure. Two-dimensional (2D) polar ferromagnet (3-FbaH)2CuCl4 (3-FbaH+ = 3-fluorobenzylammonium) is successfully obtained, which crystallizes in a polar orthorhombic space group Pca21 at room temperature. In contrast, both (2-FbaH)2CuCl4 (2-FbaH+ = 2-fluorobenzylammonium) and (4-FbaH)2CuCl4 (4-FbaH+ = 4-fluorobenzylammonium) crystallize in centrosymmetric space groups P21/c and Pnma at room temperature, respectively, displaying significant differences in crystal structures. These differences indicate that the position of the fluorine atom is a driver for the polar behavior in (3-FbaH)2CuCl4. Preliminary magnetic measurements confirm that these three perovskites possess dominant ferromagnetic interactions within the inorganic [CuCl4]∞ layers. Therefore, (3-FbaH)2CuCl4 is a polar ferromagnet, with potential as a type I multiferroic. This work is expected to promote further development of high-performance 2D copper(II) halide perovskite multiferroic materials.
RESUMEN
A family of Ruddlesden-Popper (n = 1) layered perovskite-related phases, Az2PbClxBr4-x with composition 0 ≤ x ≤ 4 were obtained using mechanosynthesis. These compounds are isostructural with K2NiF4 and therefore adopt the idealised n = 1 Ruddlesden-Popper structure. A linear variation in unit cell volume as a function of anion average radius is observed. A tunable bandgap is achieved, ranging from 2.81 to 3.43 eV, and the bandgap varies in a second-order polynomial relationship with the halide composition.
RESUMEN
Mixed halide azetidinium lead perovskites AzPbBr3-xXx (X = Cl or I) were obtained by mechanosynthesis. With varying halide composition from Cl- to Br- to I-, the chloride and bromide analogues both form in the hexagonal 6H polytype while the iodide adopts the 9R polytype. An intermediate 4H polytype is observed for mixed Br/I compositions. Overall, the structure progresses from 6H to 4H to 9R perovskite polytype with varying halide composition. Rietveld refinement of the powder X-ray diffraction patterns revealed a linear variation in unit cell volume as a function of the average radius of the anion, which not only is observed within the solid solution of each polytype (according to Vegard's law) but also extends uniformly across all three polytypes. This is correlated to a progressive (linear) tuning of the bandgap from 3.43 to 2.00 eV. Regardless of halide, the family of azetidinium halide perovskite polytypes are highly stable, with no discernible change in properties over more than 6 months under ambient conditions.
RESUMEN
Since the observation that the properties of ferroic domain walls (DWs) can differ significantly from the bulk materials in which they are formed, it has been realized that domain wall engineering offers exciting new opportunities for nanoelectronics and nanodevice architectures. Here, a novel improper ferroelectric, CsNbW2 O9 , with the hexagonal tungsten bronze structure, is reported. Powder neutron diffraction and symmetry mode analysis indicate that the improper transition (TC = 1100 K) involves unit cell tripling, reminiscent of the hexagonal rare earth manganites. However, in contrast to the manganites, the symmetry breaking in CsNbW2 O9 is electronically driven (i.e., purely displacive) via the second-order Jahn-Teller effect in contrast to the geometrically driven tilt mechanism of the manganites. Nevertheless CsNbW2 O9 displays the same kinds of domain microstructure as those found in the manganites, such as the characteristic six-domain "cloverleaf" vertices and DW sections with polar discontinuities. The discovery of a completely new material system, with domain patterns already known to generate interesting functionality in the manganites, is important for the emerging field of DW nanoelectronics.
RESUMEN
The ambient-temperature structures (orthorhombic, space group Cmc21) of the polar hexagonal tungsten bronzes RbNbW2O9 and KNbW2O9 have been determined by high-resolution powder neutron diffraction. Displacement of the A-site cation along the polar c axis with concomitant octahedral tilting occurs to optimize the A cation bonding environment, hence reducing the coordination from 18 to 16. This effect is more evident in KNbW2O9 due to decreased A cation size. The octahedral tilting in both compositions results in a doubling of the c axis that has not previously been reported, highlighting the importance of neutron diffraction as a complementary technique for structural determination of such systems.
RESUMEN
A series of isovalently A-site substituted relaxor dielectric tetragonal tungsten bronzes of general formula Ba(6-x-y)Sr(x)Ca(y)GaNb(9)O(30) were investigated. The long-range (average) crystal structure as determined by conventional diffraction techniques varies monotonically according to Vegard's law. The dielectric properties, however, do not display a similar, simple "average size" dependence and instead show a dependence on the statistical size variance, i.e. size mismatch, of the A-cation. The difficulties in Vogel-Fulcher analysis of relative permittivity and the complementary approach of using dielectric loss data fitted to Jonscher's empirical universal dielectric relaxation model is discussed.
RESUMEN
The layered perovskite LaTaO(4) has been prepared in its polar orthorhombic polymorphic form at ambient temperature. Although no structural phase transition is observed in the temperature interval 25° C < T < 500 °C, a very large axial thermal contraction effect is seen, which can be ascribed to an anomalous buckling of the perovskite octahedral layer. The non-polar monoclinic polymorph can be stabilised at ambient temperature by Nd-doping. A composition La(0.90)Nd(0.10)TaO(4) shows a first-order monoclinic-orthorhombic (non-polar to polar) transition in the region 250° C < T < 350 °C. Dielectric responses are observed at both the above structural events but, despite the 'topological ferroelectric' nature of orthorhombic LaTaO(4), we have not succeeded in obtaining ferroelectric P-E hysteresis behaviour. Structural relationships in the wider family of A(n)B(n)X(3n+2) layered perovskites are discussed.
RESUMEN
The effect of A-cation size on the structural and electrical properties in a family of ferroelectric tetragonal tungsten bronzes (TTBs) Ba4R(0.67)â¡(1.33)Nb10O30 (R = La, Nd, Sm, Gd, Dy and Y; â¡ = vacancy) was investigated. In each case, the crystal structure, as determined from lab-based ambient powder X-ray diffraction (PXRD), is metrically tetragonal and can be refined in the P4bm space group. XRD data show an increased splitting of hk0 00l reflections with decreasing R cation size indicating an increasing tetragonal distortion (measured by tetragonality c/a). Dielectric data and ferroelectric measurements indicate that the ferroelectric Curie temperature, T(C), increases with decreasing R size and so a direct correlation between T(C) and tetragonality/ionic radius of R is demonstrated. Rietveld refinements show that the large A2-site is fully occupied by Ba(2+) and, in addition to the R cation size, the presence of vacancies at the A1-site (perovskite-like site) is also shown to strongly affect the stability of ferroelectricity in this structure type.
RESUMEN
We discuss the strategy for development of novel functional materials with the tetragonal tungsten bronze structure. From the starting composition Ba6GaNb9O30, the effect of A- and B-site substitutions on the dielectric properties is used to develop an understanding of the origin and stability of the dipolar response in these compounds. Both tetragonal strain induced by large B-site cations and local strain variations created by isovalent A-site substitutions enhance dipole stability but result in a dilute, weakly correlated dipolar response and canonical relaxor behaviour. Decreasing cation size at the perovskite A2-site increases the dipolar displacements in the surrounding octahedra, but insufficiently to result in dipole ordering. Mechanisms introducing small A-site lanthanide cations and incorporation of A-site vacancies to induce ferroelectricity and magnetism are presented.
RESUMEN
A detailed investigation using variable temperature powder neutron diffraction demonstrates that BiFeO3 undergoes a phase transition from the ferroelectric alpha phase (rhombohedral, R3c) to a paraelectric beta phase (orthorhombic, Pbnm) between 820 degrees C and 830 degrees C. Coexistence of both phases over a finite temperature interval, together with abrupt changes in key structural parameters, confirms that the transition is first order. The beta phase corresponds to a GdFeO3-type perovskite structure.
RESUMEN
We have developed a modified misted deposition process by combining substrate and mist heating for the deposition of ferroelectrics on 3D nanostructures. Arrays of vertical ZnO nanowires, sputter coated with Pd bottom electrodes, are used as the substrate. Scanning electron microscopy investigations show that conformal coating of ferroelectric Pb(Zr,Ti)O(3) (PZT) with good step coverage is obtained at deposition temperatures above 140 °C. The substrate heating also eliminates the common 'bundling' problem of the nanowire arrays. On the basis of data on x-ray diffraction, energy dispersive x-ray spectroscopy, and P-E hysteresis of PZT films on flat substrates, we obtain the optimum substrate temperature window to be 180-220 °C, in terms of best step coverage and an evident ferroelectricity. This is a significant step towards the end-goal of fully integrated ZnO nanowires with ferroelectric capacitors, which may be useful for the light-emitting applications of ZnO.
RESUMEN
We report on the successful fabrication of arrays of switchable nanocapacitors made by harnessing the self-assembly of materials. The structures are composed of arrays of 20-40 nm diameter Pt nanowires, spaced 50-100 nm apart, electrodeposited through nanoporous alumina onto a thin film lower electrode on a silicon wafer. A thin film ferroelectric (both barium titanate (BTO) and lead zirconium titanate (PZT)) has been deposited on top of the nanowire array, followed by the deposition of thin film upper electrodes. The PZT nanocapacitors exhibit hysteresis loops with substantial remnant polarizations, while although the switching performance was inferior, the low-field characteristics of the BTO nanocapacitors show dielectric behavior comparable to conventional thin film heterostructures. While registration is not sufficient for commercial RAM production, this is nevertheless an embryonic form of the highest density hard-wired FRAM capacitor array reported to date and compares favorably with atomic force microscopy read-write densities.
RESUMEN
A series of experiments has been undertaken to understand more about the fundamental origin of the thickness-induced permittivity collapse often observed in conventional thin film ferroelectric heterostructures. The various experiments are discussed, highlighting the eventual need to examine permittivity collapse in thin film single crystal material. It has been seen that dielectric collapse is not a direct consequence of reduced size, and neither is it a consequence of unavoidable physics associated with the ferroelectric-electrode boundary. Research on three-dimensional shape-constrained ferroelectrics, emphasizing self-assembled structures based on nanoporous alumina templates and on FIB-milled single crystals, is also presented, and appears to represent an exciting area for ongoing research.
