RESUMEN
Abstract The present study aimed to assess population structure and phylogenetic relationships of nine subspecies of Brassica rapa L. represented with thirty-five accessions cover a wide range of species distribution area using isozyme analysis in order to select more diverse accessions as supplementary resources that can be utilized for improvement of B. napus. Enzyme analysis resulted in detecting 14 putative polymorphic loci with 27 alleles. Mean allele frequency 0.04 (rare alleles) was observed in Cat4A and Cat4B in sub species Oleifera accession CR 2204/79 and in subspecies trilocularis accessions CR 2215/88 and CR 2244/88. The highest genetic diversity measures were observed in subspecies dichotoma, accession CR 1585/96 (the highest average of observed (H0) and expected heterozygosity (He), and number of alleles per locus (Ae)). These observations make this accession valuable genetic resource to be included in breeding programs for the improvement of oilseed B. napus. The average fixation index (F) is significantly higher than zero for the analysis accessions indicating a significant deficiency of heteozygosity. The divergence among subspecies indicated very great genetic differentiation (FST = 0.8972) which means that about 90% of genetic diversity is distributed among subspecies, while 10% of the diversity is distributed within subspecies. This coincides with low value of gene flow (Nm = 0.0287). B. rapa ssp. oleifera (turnip rape) and B. rapa ssp. trilocularis (sarson) were grouped under one cluster which coincides with the morphological classification.
Resumo O presente estudo teve como objetivo avaliar a estrutura populacional e as relações filogenéticas de nove subespécies de Brassica rapa L. representadas com 35 acessos, cobrindo uma ampla gama de áreas de distribuição de espécies usando análise isoenzimática, a fim de selecionar acessos mais diversos como recursos suplementares que podem ser utilizados para melhoria de B. napus. A análise enzimática resultou na detecção de 14 loci polimórficos putativos com 27 alelos. A frequência média de 0,04 alelo (alelos raros) foi observada em Cat4A e Cat4B, nas subespécies Oleifera CR 2204/79 e nas subespécies trilocularis CR 2215/88 e CR 2244/88. As maiores medidas de diversidade genética foram observadas na subespécie dicotômica CR 1585/96 (a média mais alta observada (H0) e heterozigosidade esperada (He) e número de alelos por locus (Ae). Essas observações tornam esse acesso um valioso recurso genético a ser incluído em programas de melhoramento de oleaginosas B. napus. O índice médio de fixação (F) é significativamente maior que 0 para os acessos à análise, indicando uma deficiência significativa de heterozigose. A divergência entre as subespécies indicou uma grande diferenciação genética (FST = 0,8972), o que significa que cerca de 90% da diversidade genética é distribuída entre as subespécies, enquanto 10% da diversidade é distribuída nas subespécies. Isso coincide com o baixo valor do fluxo gênico (Nm = 0,0287). B. rapa ssp. oleifera (nabo) e B. rapa ssp. trilocularis (sarson) foram agrupados conforme a classificação morfológica.
Asunto(s)
Brassica napus , Brassica rapa/genética , Filogenia , Variación Genética/genética , Fitomejoramiento , Isoenzimas/genéticaRESUMEN
The present study aimed to assess population structure and phylogenetic relationships of nine subspecies of Brassica rapa L. represented with thirty-five accessions cover a wide range of species distribution area using isozyme analysis in order to select more diverse accessions as supplementary resources that can be utilized for improvement of B. napus. Enzyme analysis resulted in detecting 14 putative polymorphic loci with 27 alleles. Mean allele frequency 0.04 (rare alleles) was observed in Cat4A and Cat4B in sub species Oleifera accession CR 2204/79 and in subspecies trilocularis accessions CR 2215/88 and CR 2244/88. The highest genetic diversity measures were observed in subspecies dichotoma, accession CR 1585/96 (the highest average of observed (H0) and expected heterozygosity (He), and number of alleles per locus (Ae)). These observations make this accession valuable genetic resource to be included in breeding programs for the improvement of oilseed B. napus. The average fixation index (F) is significantly higher than zero for the analysis accessions indicating a significant deficiency of heteozygosity. The divergence among subspecies indicated very great genetic differentiation (FST = 0.8972) which means that about 90% of genetic diversity is distributed among subspecies, while 10% of the diversity is distributed within subspecies. This coincides with low value of gene flow (Nm = 0.0287). B. rapa ssp. oleifera (turnip rape) and B. rapa ssp. trilocularis (sarson) were grouped under one cluster which coincides with the morphological classification.
Asunto(s)
Brassica napus , Brassica rapa , Brassica rapa/genética , Variación Genética/genética , Isoenzimas/genética , Filogenia , FitomejoramientoRESUMEN
Abstract The present study aimed to assess population structure and phylogenetic relationships of nine subspecies of Brassica rapa L. represented with thirty-five accessions cover a wide range of species distribution area using isozyme analysis in order to select more diverse accessions as supplementary resources that can be utilized for improvement of B. napus. Enzyme analysis resulted in detecting 14 putative polymorphic loci with 27 alleles. Mean allele frequency 0.04 (rare alleles) was observed in Cat4A and Cat4B in sub species Oleifera accession CR 2204/79 and in subspecies trilocularis accessions CR 2215/88 and CR 2244/88. The highest genetic diversity measures were observed in subspecies dichotoma, accession CR 1585/96 (the highest average of observed (H0) and expected heterozygosity (He), and number of alleles per locus (Ae)). These observations make this accession valuable genetic resource to be included in breeding programs for the improvement of oilseed B. napus. The average fixation index (F) is significantly higher than zero for the analysis accessions indicating a significant deficiency of heteozygosity. The divergence among subspecies indicated very great genetic differentiation (FST = 0.8972) which means that about 90% of genetic diversity is distributed among subspecies, while 10% of the diversity is distributed within subspecies. This coincides with low value of gene flow (Nm = 0.0287). B. rapa ssp. oleifera (turnip rape) and B. rapa ssp. trilocularis (sarson) were grouped under one cluster which coincides with the morphological classification.
Resumo O presente estudo teve como objetivo avaliar a estrutura populacional e as relações filogenéticas de nove subespécies de Brassica rapa L. representadas com 35 acessos, cobrindo uma ampla gama de áreas de distribuição de espécies usando análise isoenzimática, a fim de selecionar acessos mais diversos como recursos suplementares que podem ser utilizados para melhoria de B. napus. A análise enzimática resultou na detecção de 14 loci polimórficos putativos com 27 alelos. A frequência média de 0,04 alelo (alelos raros) foi observada em Cat4A e Cat4B, nas subespécies Oleifera CR 2204/79 e nas subespécies trilocularis CR 2215/88 e CR 2244/88. As maiores medidas de diversidade genética foram observadas na subespécie dicotômica CR 1585/96 (a média mais alta observada (H0) e heterozigosidade esperada (He) e número de alelos por locus (Ae). Essas observações tornam esse acesso um valioso recurso genético a ser incluído em programas de melhoramento de oleaginosas B. napus. O índice médio de fixação (F) é significativamente maior que 0 para os acessos à análise, indicando uma deficiência significativa de heterozigose. A divergência entre as subespécies indicou uma grande diferenciação genética (FST = 0,8972), o que significa que cerca de 90% da diversidade genética é distribuída entre as subespécies, enquanto 10% da diversidade é distribuída nas subespécies. Isso coincide com o baixo valor do fluxo gênico (Nm = 0,0287). B. rapa ssp. oleifera (nabo) e B. rapa ssp. trilocularis (sarson) foram agrupados conforme a classificação morfológica.
RESUMEN
A three-dimensional (3D) computational model of stenotic coronary artery bypass grafting (CABG) system with fluid-structure interaction (FSI) using realistic physiological conditions is introduced. Unsteady pulsatile blood flow is applied to the wall of non-linear deformable arteries over the systolic period. In the analysis, the arbitrarily Lagrangian-Eulerian (ALE) formulation is used to couple the fluid region and solid domain. The method couples the equations of the deformation of the artery wall and applies them as the fluid domain boundary condition. The flow distribution and haemodynamic forces are presented in terms of velocity profiles and temporal and spatial wall shear stresses (WSSs) at the distal area. Rapid changes in the flow fields are observed in the early stages of the cardiac cycle, which alters the location of the recirculation zone from the toe to the host bed and then to the heel. The migration of the recirculation zone, considering the effect of deformability of the artery wall, indicates the same trend as the rigid wall model according to the location of low and high WSSs. However, the WSSs in the critical areas such as toe, heel, and suture lines are found to have dramatic drops in magnitudes in comparison with those of the rigid wall model. This could initiate the promotion of intimal hyperplasia (IH) and may cause an early graft failure in CABG.
Asunto(s)
Puente de Arteria Coronaria , Estenosis Coronaria/fisiopatología , Estenosis Coronaria/cirugía , Vasos Coronarios/fisiopatología , Vasos Coronarios/cirugía , Modelos Cardiovasculares , Flujo Pulsátil , Velocidad del Flujo Sanguíneo , Presión Sanguínea , Simulación por Computador , Módulo de Elasticidad , Humanos , Dinámicas no Lineales , Resistencia al Corte , Estrés MecánicoRESUMEN
The purpose of this study was to examine the effect of anastomotic angle on the flow patterns and wall shear distributions at the distal anastomosis of a left interior mammary artery (LIMA) graft to the left anterior descending artery (LDA). It is now well recognized that abnormal wall shear stress distributions along the anastomotic bed, around the toe, and around the heel can contribute to the focal development of intimal hyperplasia. However, the exact nature of the interaction between the dominant pulsing flow and the anastomotic angle on wall shear stresses has not been fully investigated numerically. In this study a commercial CFD package was used for three-dimensional flow analysis where the pulsatile waveforms and flowrates used as the boundary conditions are representative of an anastomosed left internal mammary artery and a stenosed left anterior descending coronary artery (intermediate, <70 per cent diameter narrowing). The flow patterns and distributions of time-averaged wall shear stress (TAWSS) and the oscillatory shear index (OSI) for three anastomotic angles of 20, 40, and 60 degrees were evaluated and compared with other published data. The findings indicated that transient, highly disturbed flow patterns occurred in localized regions of the proximal and distal native segments and in the anastomotic domain including recirculation zones, moving points of stagnation, and oscillating wall shear stresses mainly on the bed, at the toe, and at the heel. Moreover, higher anastomotic angles resulted in more extreme variations in TAWSS and OSI values, particularly around the toe and along the bed. In addition, the effect of anastomotic angle on OSI values at the heel followed the same pattern whereas the TAWSS values along the graft at the heel showed a significant increase at the lowest anastomotic angle of 20 degrees.
Asunto(s)
Anastomosis Quirúrgica/métodos , Vasos Coronarios/fisiopatología , Vasos Coronarios/cirugía , Arterias Mamarias/fisiopatología , Arterias Mamarias/cirugía , Modelos Cardiovasculares , Flujo Pulsátil/fisiología , Velocidad del Flujo Sanguíneo/fisiología , Presión Sanguínea/fisiología , Simulación por Computador , Puente de Arteria Coronaria/métodos , Humanos , Resistencia al CorteRESUMEN
This review discusses strategies that may address some of the limitations associated with replacing diseased or dysfunctional aortic valves with mechanical or tissue valves. These limitations range from structural failure and thromboembolic complications associated with mechanical valves to a limited durability and calcification with tissue valves. In pediatric patients there is an issue with the inability of substitutes to grow with the recipient. The emerging science of tissue engineering potentially provides an attractive alternative by creating viable tissue structures based on a resorbable scaffold. Morphometrically precise, biodegradable polymer scaffolds may be fabricated from data obtained from scans of natural valves by rapid prototyping technologies such as fused deposition modelling. The scaffold provides a mechanical profile until seeded cells produce their own extra cellular matrix. The microstructure of the forming tissue may be aligned into predetermined spatial orientations via fluid transduction in a bioreactor. Although there are many technical obstacles that must be overcome before tissue engineered heart valves are introduced into routine surgical practice these valves have the potential to overcome many of the shortcomings of current heart valve substitutes.
Asunto(s)
Válvula Aórtica/cirugía , Prótesis Valvulares Cardíacas , Animales , Materiales Biocompatibles , Humanos , Polímeros , Complicaciones Posoperatorias , Diseño de Prótesis , Tromboembolia/etiología , Ingeniería de Tejidos/métodosRESUMEN
Dynamics of extracellular matrix (ECM) deposition and scaffold degradation in cell-polymer constructs have been studied in a random fluctuating environment created due to the applications of growth factors into the in vitro generation of cartilaginous constructs. Existing models of cell-polymer constructs for the design of engineered cartilage have been discussed and then a new deterministic scheme in random environment proposed taking into account the effects of growth factors as the environmental variability in the form of Gaussian white noise. Steady-state probability distribution of each individual component of the ECM in its homeostasis is found explicitly. The computer-simulated results of the model have been discussed and then compared with the data from a variety of scaffold systems and culture conditions.
Asunto(s)
Cartílago/fisiología , Condrocitos/fisiología , Ambiente , Proteínas de la Matriz Extracelular/metabolismo , Matriz Extracelular/fisiología , Modelos Biológicos , Ingeniería de Tejidos/métodos , Animales , Cartílago/citología , Técnicas de Cultivo de Célula/métodos , División Celular/fisiología , Células Cultivadas , Condrocitos/citología , Simulación por Computador , Matriz Extracelular/ultraestructura , Humanos , Modelos Estadísticos , Procesos EstocásticosRESUMEN
Thrombus formation and hemolysis have been linked to the dynamic flow characteristics of heart valve prostheses. To enhance our understanding of the flow characteristics past the aortic position of a Jellyfish (JF) valve in the left ventricle, in vitro laser Doppler anemometry (LDA) measurements were carried out under physiological pulsatile flow conditions. The hemodynamic performance of the JF valve was then compared with that of the St. Vincent (SV) valve. The comparison was given in terms of mean systolic pressure drop, back flow energy losses, flow velocity, and shear stresses at various locations downstream of both valves and at cardiac outputs of 3.5 L/min, 4.5 L/min, and 6.5 L/min respectively. The results indicated that both valves created disturbed flow fields with elevated levels of turbulent shear stress as well as higher levels of turbulence in the immediate vicinity of the valve and up to 1 diameter of the pipe (D) downstream of the valve. At a location further downstream, the JF valve showed better flow characteristics than the SV in terms of velocity profiles and turbulent shear stresses. The closure volume of the SV valve was found to be 2.5 times higher than that of the JF valve. Moreover, the total back flow losses and mean systolic pressure drop also were found to be higher in the SV than the JF valve.
Asunto(s)
Válvula Aórtica , Prótesis Valvulares Cardíacas , Diseño de Prótesis , Flujo Pulsátil/fisiología , Velocidad del Flujo Sanguíneo , Presión Sanguínea , Hemodinámica/fisiología , Hemorreología , Técnicas In Vitro , Ensayo de Materiales , Estrés Mecánico , SístoleRESUMEN
The effect of chamber geometry on the characteristics of turbulent steady flow through a newly designed artificial heart valve, "the jellyfish valve," has been investigated for flow rates matching those of peak systole. Laser Doppler Anemometry (LDA) was employed to determine the velocity and shear stress distributions at various locations downstream of the jellyfish valve. Three geometrically different aortic valve chambers have been investigated: namely, a chamber with sinuses of Valsalva, an ellipsoidal chamber, and a cylindrical chamber. The results of this investigation indicated that the aorta with sinuses of Valsalva model had the highest turbulent shear stresses whereas the ellipsoidal model gave the highest-pressure drops. However, for the various flow rates examined, including the systole peak value of 26 L/min, it appears that the ellipsoidal model displays better hydrodynamic characteristics in terms of shear stress and uniformity of axial velocity distributions downstream of the jellyfish valve.
Asunto(s)
Válvula Aórtica , Prótesis Valvulares Cardíacas , Diseño de Prótesis , Velocidad del Flujo Sanguíneo , Presión Sanguínea , Estudios de Evaluación como Asunto , Hemorreología , Humanos , Flujometría por Láser-Doppler , Ensayo de Materiales , Presión , Flujo Sanguíneo Regional , Reología , Seno Aórtico , Estrés Mecánico , Propiedades de Superficie , SístoleRESUMEN
The work reported here is related to the hydrodynamic performance of a Jellyfish valve and St Vincent valve in terms of total energy losses, mean systolic pressure drop and regurgitation. The in vitro experimental investigation was conducted at cardiac outputs of 3.5, 4.5 and 6.51 min-1 across the two valves and under pulsatile flow condition. It was found that the closure volume of the St Vincent valve was about 2.5 times higher than that of the Jellyfish valve. The total back flow losses on the other hand were found to be in the range of 36.5 to 107.1 and 85.5 to 192.5 mJ for the Jellyfish valve and St Vincent valve respectively. Moreover, the mean systolic pressure drop of the St Vincent valve was found to be higher than that of the Jellyfish valve. However, for all the operating conditions tested here, the Jellyfish valve showed superior hydrodynamic performance in terms of backflow and mean systolic pressure as well as energy losses.