Regulation of nerve cells using conductive nanofibrous scaffolds for controlled release of Lycium barbarum polysaccharides and nerve growth factor.

Currently, more and more patients suffer from peripheral nerve injury due to trauma, tumor and other causes worldwide. Biomaterial-based nerve conduits are increasingly recognized as a potential alternative to nerve autografts for the treatment of peripheral nerve injury. However, an ideal nerve conduit must offer topological guidance and biochemical and electrical signal transduction mechanisms. In this work, aligned conductive nanofibrous scaffolds comprising polylactic-co-glycolic acid and multiwalled carbon nanotubes (MWCNTs) were fabricated via coaxial electrospinning, and nerve growth factor (NGF) and Lycium barbarum polysaccharides (LBP) purified from the wolfberry were loaded on the core and shell layers of the nanofibers, respectively. LBP were confirmed to accelerate long-distance axon regeneration after severe peripheral nerve injury. In addition, the synergistic promotion of LBP and NGF on nerve cell proliferation and neurite outgrowth was demonstrated. MWCNTs were introduced into the aligned fibers to further increase the electrical conductivity, which promoted the directional growth and neurite extension of neurons in vitro. Further, the combination of conductive fibrous scaffolds with electrical stimulation that mimics endogenous electric fields significantly promoted the differentiation of PC12 cells and the axon outgrowth of neurons. Based on robust cell-induced behaviors, conductive composite fibers with optimized fiber alignment may be used for the promotion of nerve recovery.

Current Advancements and Strategies of Biomaterials for Tendon Repair: A Review.

Tendon is a bundle of tissue comprising of a large number of collagen fibers that connects muscle to bone. However, overuse or trauma may cause degeneration and rupture of the tendon tissues, which imposes an enormous health burden on patients. In addition to autogenous and allogeneic transplantation, which is commonly used in the clinic, the current research on tendon repair is focused on developing an appropriate scaffold via biomaterials and fabrication technology. The development of a scaffold that matches the structure and mechanics of the natural tendon is the key to the success of the repair, so the synergistic optimization of the scaffold fabrication technology and biomaterials has always been a concern of researchers. A series of strategies include the preparation of scaffolds by electrospinning and 3D printing, as well as the application of injectable hydrogels and microspheres, which can be used individually or in combination with cells, growth factors for tendon repair. This review introduces the tendon tissue structure, the repair process, the application of scaffolds, and the current challenges facing biomaterials, and gives an outlook on future research directions. With biomaterials and technology continuing to be developed, we envision that the scaffolds could have an important impact on the application of tendon repair.

Evaluation of natural protein-based nanofiber composite photocrosslinking hydrogel for skin wound regeneration.

Protein based photocrosslinking hydrogels with nanofiber dispersions were reported to be an effective wound dressing. In this study, two kinds of protein (gelatin and decellularized dermal matrix) were modified to obtain GelMA and ddECMMA, respectively. Poly(ε-caprolactone) nanofiber dispersions (PCLPBA) and thioglycolic acid-modified chitosan (TCS) were added into GelMA solution and ddECMMA solution, respectively. After photocrosslinking, four kinds of hydrogel (GelMA, GTP4, DP and DTP4) were fabricated. The hydrogels showed excellent physico-chemical property, biocompatibility and negligible cytotoxicity. When applied on the full-thickness cutaneous deficiency of SD rats, hydrogel treated groups exhibited an enhanced wound healing effect than Blank group. Besides, the histological staining of H&E and Masson's showed that hydrogels groups with PCLPBA and TCS (GTP4 and DTP4) improved wound healing. Furthermore, GTP4 group performed better healing effect than other groups, which had great potential in skin wound regeneration.

On the development of modular polyurethane-based bioelastomers for rapid hemostasis and wound healing.

Massive hemorrhage may be detrimental to the patients, which necessitates the advent of new materials with high hemostatic efficiency and good biocompatibility. The objective of this research was to screen for the effect of the different types of bio-elastomers as hemostatic dressings. 3D loose nanofiber sponges were prepared; PU-TA/Gel showed promising potential. Polyurethane (PU) was synthesized and electrospun to afford porous sponges, which were crosslinked with glutaraldehyde (GA). FTIR and 1H-NMR evidenced the successful synthesis of PU. The prepared PU-TA/Gel sponge had the highest porosity and water absorption ratio. Besides, PU-TA/Gel sponges exhibited cytocompatibility, negligible hemolysis and the shortest clotting time. PU-TA/Gel sponge rapidly induced stable blood clots with shorter hemostasis time and less bleeding volume in a liver injury model in rats. Intriguingly, PU-TA/Gel sponges also induced good skin regeneration in a full-thickness excisional defect model as revealed by the histological analysis. These results showed that the PU-TA/Gel-based sponges may offer an alternative platform for hemostasis and wound healing.

Synthesis of oxidized sodium alginate and its electrospun bio-hybrids with zinc oxide nanoparticles to promote wound healing.

Electrospun fibers provide a promising platform for wound healing; however, they lack requisite characteristics for wound repair, including antibacterial and anti-inflammatory properties and angiogenic ability. Sodium alginate (SA) is being used for different types of applications. However, the poor spinnability of SA restricts its applications. The objectives of this study were three-fold: a) to synthesize oxidized sodium alginate (OSA) to improve its spinnability, b) to fabricate composite fibrous membranes by blending OSA along with zinc oxide nanoparticles (ZnO-NPs), and c) to decipher antibacterial and anti-inflammatory properties as well as biocompatibility of membranes in vitro and in vivo. OSA displaying different oxidation degrees (Dox (%)) was synthesized by varying the molar ratio of sodium periodate to SA. OSA (Dox, ∼48 %) afforded smooth and uniform fibers; 0.5 wt% of adipic dihydrazide (ADH) evolved into structurally stable and water-insoluble membranes. Composite fibrous membranes containing 2 wt% of ZnO-NPs displayed good biocompatibility and bactericidal effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro. In addition, composite membranes showed remarkable epithelialization, neovascularization, and anti-inflammatory response than that of the membranes devoid of ZnO-NPs. Conclusively, these composite fibrous membranes may have broad implications for wound healing applications.

A photocrosslinking antibacterial decellularized matrix hydrogel with nanofiber for cutaneous wound healing.

ddECMMA is the methacrylating product of decellularized dermal extracellular matrix with biological signals and capable of photocrosslinking. Thiolated chitosan (TCS) is an effective antibacterial component. PCLPBA is a kind of plasma-treated polycaprolactone nanofiber dispersions (PCLP) that regulates macrophage polarization and promotes angiogenesis. In this study, we obtained ddECMMA via methacrylation reaction. TCS was prepared by reaction between chitosan and thioglycolic acid. PCLPBA was fabricated via reaction between PCLP and 3-buten-1-amine. TCS and PCLPBA were mixed in ddECMMA solution and photocrosslinked to form DTP4 hydrogel. The hydrogel showed rapid gelation, good mechanical strength, antibacterial and antioxidant properties. When it was cocultured with NIH 3T3 cells, the cells showed good morphology and proliferation rate. After applying it to the full-thickness cutaneous wound, wounds almost healed in 2 weeks via re-epithelialization and neovascularization with negligible scar tissue. The results indicate that DTP4 hydrogel is a promising candidate for clinic skin wound healing.

Composite Superelastic Aerogel Scaffolds Containing Flexible SiO2 Nanofibers Promote Bone Regeneration.

Repairing irregular-shaped bone defects poses enormous challenges. Scaffolds that can fully fit the defect site and simultaneously induce osteogenesis and angiogenesis hold great promise for bone defect healing. This study aimed to produce superelastic organic/inorganic composite aerogel scaffolds by blending silica nanofibers (SiO2 ) and poly (lactic acid)/gelatin (PLA/gel) nanofibers; the content of SiO2 nanofibers is varied from 0-60 wt% (e.g., PLA/gel, PLA/gel/SiO2 -L, PLA/gel/SiO2 -M, and PLA/gel/SiO2 -H for 0%, 20%, 40%, and 60% of SiO2 nanofibers, respectively) to produce a range of scaffolds. The PLA/gel/SiO2 -M scaffold has excellent elasticity and good mechanical properties. In vitro experiments demonstrate that the silicon ions released from PLA/gel/SiO2 -M scaffolds promote the differentiation of rat bone marrow-derived mesenchymal stem cells into osteoblasts, enhancing alkaline phosphatase activity and bone-related genes expressions. The released silicon ions also promote the proliferation of human umbilical vein endothelial cells and the expression of vascular endothelial growth factors, thereby promoting angiogenesis. The assessment of these scaffolds in a calvarial defect model in rats shows good potential of PLA/gel/SiO2 -M to induce bone regeneration as well as promote osteogenesis and angiogenesis. Overall, these organic/inorganic composite scaffolds have good biological activity, which may have broad applications for tissue engineering.

Synergistic effect of glucagon-like peptide-1 analogue liraglutide and ZnO on the antibacterial, hemostatic, and wound healing properties of nanofibrous dressings.

Bacterial infections and poor vascularization delay wound healing, thus necessitating alternative strategies for functional wound dressings. Zinc oxide (ZnO) has been shown to exert a potent antibacterial effect against bacterial species. Similarly, Glucagon-like peptide-1 (GLP-1) analogue liraglutide (LG) has been shown to promote vascularization and improve wound healing. The objective of this research was to investigate the synergistic effect of ZnO nanoparticles (ZnO-NPs) and LG to simultaneously induce antibacterial, hemostatic, and vascularization effects for infected wound healing. Electrospun poly (l-lactide-co-glycolide)/gelatin (PLGA/Gel) membranes containing ZnO-NPs and LG displayed good biocompatibility and hemostatic ability. Both, ZnO-NPs and LG exhibited synergistic antibacterial effect against Staphylococcus aureus and Escherichia coli as well as improved the migration and tubule-like network formation of human umbilical vein endothelial cells (HUVECs) in vitro. Once evaluated in a bacterial-infected wound model in rats, the membranes loaded with ZnO-NPs and LG effectively promoted wound healing causing significant reduction in wound area and scar-like tissue formation. Therefore, ZnO-NPs/LG synergism may offer an invaluable solution for the treatment of poorly healing infected wounds.

Chondroitin sulfate cross-linked three-dimensional tailored electrospun scaffolds for cartilage regeneration.

Degenerated cartilage tissues remain a burgeoning issue to be tackled, while bioactive engineering products available for optimal cartilage regeneration are scarce. In the present study, two-dimensional (2DS) poly(l-lactide-co-ε-caprolactone)/silk fibroin (PLCL/SF)-based scaffolds were fabricated by conjugate electrospinning method, which were then cross-linked with chondroitin sulfate (CS) to further enhance their mechanical and biological performance. Afterwards, three-dimensional (3D) PLCL/SF scaffolds (3DS) and CS-crosslinked 3D scaffolds (3DCSS) with tailored size were successfully fabricated by an in-situ gas foaming in a confined mold followed by freeze-dried. Gas-foamed scaffolds displayed high porosity, rapid water uptake, and stable mechanical properties. While all of the scaffolds exhibited good cytocompatibility in vitro; 3DCSS showed better cell seeding efficiency and chondro-protective effect compared to other scaffolds. Besides, 3DCSS scaffolds supported the formation of more mature cartilage-like tissues along with the best repair outcome in a rabbit articular cartilage defect model in vivo, as well as less expression level of pro-inflammatory cytokines, including interleukin (IL)-1ß and tumor necrosis factor (TNF)-α than that of the other groups. Taken together, 3DCSS may provide an alternative therapeutic option for cartilage tissue repair.

Prodrug inspired bi-layered electrospun membrane with properties of enhanced tissue integration for guided tissue regeneration.

Guided tissue regeneration (GTR) membranes play a vital role in periodontal surgery. Recently a series of composite electrospun membranes have been fabricated to improve the unexpected biodegradation of collagen-based GTR membranes. However, their tissue integrity needs to be studied in depth. In this study, a bi-layered electrospun membrane (BEM) inspired by "prodrug" was fabricated, which contained a dense-layer (BEM-DL) and a potential loose-layer (BEM-LL). The nanofibers of BEM-DL were composed of poly(l-lactic-co-glycolic acid) and tilapia skin collagen (TSC). Whereas the BEM-LL consisted of two types of nanofibers, one was the same as BEM-DL and the other was made from TSC. The morphology, degradation in vitro, cytocompatibility and biocompatibility in rats were investigated with a poly(lactic-co-glycolic acid) electrospun membrane (PLGA) as the negative control. The pore size of BEM-LL soaked for 7 days became larger than the original sample (164.8 ± 90.9 and 52.5 ± 21.0 µm2 , respectively), which was significantly higher (p < .05) than that of BEM-DL and PLGA. The BEM-LL displayed a larger weight loss rate of 82.3 ± 3.6% than the BEM-DL of 46.0 ± 2.8% at day 7 because of the rapid degradation of TSC fibers. The cytocompatibility test demonstrated that L929 cells were only spread on the surface of the BEM-DL while MC3T3-E1 cells grew into the BEM-LL layer. The subcutaneous implantation test further proved that BEM-DL performed as a cellular barrier, whereas BEM-LL was conducive to cell infiltration as deep as 200 µm with reduced fibrous encapsulation. Herein, the BEM inspired by "prodrug" is a promising GTR membrane with a property of enhanced tissue integration.

Converging 3D Printing and Electrospinning: Effect of Poly(l-lactide)/Gelatin Based Short Nanofibers Aerogels on Tracheal Regeneration.

Recently, various tissue engineering based strategies have been pursued for the regeneration of tracheal tissues. However, previously developed tracheal scaffolds do not accurately mimic the microstructure and mechanical behavior of the native trachea, which restrict their clinical translation. Here, tracheal scaffolds are fabricated by using 3D printing and short nanofibers (SF) dispersion of poly(l-lactide)/gelatin (0.5-1.5 wt%) to afford tracheal constructs. The results display that the scaffolds containing 1.0 wt % of SF exhibit low density, good water absorption capacity, reasonable degradation rate, and stable mechanical properties, which were comparable to the native trachea. Moreover, the designed scaffolds possess good biocompatibility and promote the growth and infiltration of chondrocytes in vitro. The biocompatibility of tracheal scaffolds is further assessed after subcutaneous implantation in mice for up to 4 and 8 weeks. Histological assessment of tracheal constructs explanted at week 4 shows that scaffolds can maintain their structural integrity and support the formation of neo-vessels. Furthermore, cell-scaffold constructs gradually form cartilage-like tissues, which mature with time. Collectively, these engineered tracheal scaffolds not only possess appropriate mechanical properties to afford a stabilized structure but also a biomimetic extracellular matrix-like structure to accomplish tissue regeneration, which may have broad implications for tracheal regeneration.

Vascular Endothelial Growth Factor-Capturing Aligned Electrospun Polycaprolactone/Gelatin Nanofibers Promote Patellar Ligament Regeneration.

Ligament injuries are common in sports and other rigorous activities. It is a great challenge to achieve ligament regeneration after an injury due the avascular structure and low self-renewal capability. Herein, we developed vascular endothelial growth factor (VEGF)-binding aligned electrospun poly(caprolactone)/gelatin (PCL/Gel) scaffolds by incorporating prominin-1-binding peptide (BP) sequence and exploited them for patellar ligament regeneration. The adsorption of BP onto scaffolds was discerned by various techniques, such as Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and confocal laser scanning microscope. The accumulation of VEGF onto scaffolds correlated with the concentration of the peptide in vitro. BP-anchored PCL/Gel scaffolds (BP@PCL/Gel) promoted the tubular formation of human umbilical vein endothelial cells (HUVECs) and wound healing in vitro. Besides, BP containing scaffolds exhibited higher content of CD31+ cells than that of the control scaffolds at 1 week after implantation in vivo. Moreover, BP containing scaffolds improved biomechanical properties and facilitated the regeneration of matured collagen in patellar ligament 4 weeks after implantation in mice. Overall, this strategy of peptide-mediated orchestration of VEGF provides an enticing platform for the ligament regeneration, which may also have broad implications for tissue repair applications. STATEMENT OF SIGNIFICANCE: Ligament injuries are central to sports and other rigorous activities. Given to the avascular nature and poor self-healing capability of injured ligament tissues, it is a burgeoning challenge to fabricate tissue-engineered scaffolds for ligament reconstruction. Vascular endothelial growth factor (VEGF) is pivotal to the neo-vessel formation. However, the high molecular weight of VEGF as well as its short half-life in vitro and in vivo limits its therapeutic potential. To circumvent these limitations, herein, we functionalized aligned electrospun polycaprolactone/gelatin (PCL/Gel)-based scaffolds with VEGF-binding peptide (BP) and assessed their biocompatibility and performance in vitro and in vivo. BP-modified scaffolds accumulated VEGF, improved tube formation of HUVECs, and induced wound healing in vitro, which may have broad implications for regenerative medicine and tissue engineering.

Conjugate Electrospun 3D Gelatin Nanofiber Sponge for Rapid Hemostasis.

Developing an excellent hemostatic material with good biocompatibility and high blood absorption capacity for rapid hemostasis of deep non-compressible hemorrhage remains a significant challenge. Herein, a novel conjugate electrospinning strategy to prepare an ultralight 3D gelatin sponge consisting of continuous interconnected nanofibers. This unique fluffy nanofiber structure endows the sponge with low density, high surface area, compressibility, and ultrastrong liquid absorption capacity. In vitro assessments show the gelatin nanofiber sponge has good cytocompatibility, high cell permeability, and low hemolysis ratio. The rat subcutaneous implantation studies demonstrate good biocompatibility and biodegradability of gelatin nanofiber sponge. Gelatin nanofiber sponge aggregates and activates platelets in large quantities to accelerate the formation of platelet embolism, and simultaneously escalates other extrinsic and intrinsic coagulation pathways, which collectively contribute to its superior hemostatic capacity. In vivo studies on an ear artery injury model and a liver trauma model of rabbits demonstrate that the gelatin nanofiber sponge rapidly induce stable blood clots with least blood loss compared to gelatin nanofiber membrane, medical gauze, and commercial gelatin hemostatic sponge. Hence, the gelatin nanofiber sponge holds great potential as an absorbable hemostatic agent for rapid hemostasis.

Multifunctional bioactive core-shell electrospun membrane capable to terminate inflammatory cycle and promote angiogenesis in diabetic wound.

Diabetic wound (DW) healing is a major clinical challenge due to multifactorial complications leading to prolonged inflammation. Electrospun nanofibrous (NF) membranes, due to special structural features, are promising biomaterials capable to promote DW healing through the delivery of active agents in a controlled manner. Herein, we report a multifunctional composite NF membrane loaded with ZnO nanoparticles (NP) and oregano essential oil (OEO), employing a new loading strategy, capable to sustainedly co-deliver bioactive agents. Physicochemical characterization revealed the successful fabrication of loaded nanofibers with strong in vitro anti-bacterial and anti-oxidant activities. Furthermore, in vivo wound healing confirmed the potential of bioactive NF membranes in epithelialization and granulation tissue formation. The angiogenesis was greatly prompted by the bioactive NF membranes through expression of vascular endothelial growth factor (VEGF). Moreover, the proposed NF membrane successfully terminated the inflammatory cycle by downregulating the pro-inflammatory cytokines interleukin -6 (IL-6) and matrix metalloproteinases-9 (MMP-9). In vitro and in vivo studies revealed the proposed NF membrane is a promising dressing material for the healing of DW.

Exploration of the antibacterial and wound healing potential of a PLGA/silk fibroin based electrospun membrane loaded with zinc oxide nanoparticles.

Zinc oxide nanoparticles (ZnO NPs) are known for their antibacterial, antioxidant, and anti-inflammatory activities. Moreover, ZnO NPs can stimulate cell migration, re-epithelialization, and angiogenesis. All these attributes are highly relevant to wound healing. Local administration of ZnO NPs to the wound can be achieved through electrospun nanofibers. We hypothesized that the use of poly(lactide-co-glycolic acid) (PLGA)/silk fibroin (SF) nanofiber-based delivery of ZnO would maintain the bioavailability of NPs on the wound area and synchronization with the unique structural features of electrospun nanofibers, could stimulate wound closure, re-epithelialization, collagen deposition, cellular migration, and angiogenesis. In this study, we fabricated PLGA/SF (PS) nanofibrous (NF) membranes with and without ZnO NPs and extensively characterized them for various physicochemical and biological attributes. Scanning electron microscopy (SEM) revealed smooth fibers and ZnO concentration-dependent increase in the fiber diameter. Transmission electron microscopy (TEM) also confirmed the encapsulation of ZnO NPs in the polymer matrix. The successful loading of ZnO was further confirmed by X-ray diffraction. Furthermore, mechanical testing revealed a ZnO concentration-dependent increase in the tensile strength. Moreover, biocompatibility was evaluated through in vitro cell culture. A mild anti-oxidant activity was also noted mainly due to the presence of silk fibroin. In vitro antibacterial tests revealed a ZnO concentration-dependent increase in antibacterial activity and PLGA/SF/3% ZnO (PSZ3) remained completely active against E. coli and S. aureus. More importantly, NF membranes were evaluated for their in vivo wound healing potential. The PSZ3 NF membrane not only facilitated the early wound closure but also remarkably enhanced the quality of wound healing confirmed through histopathological analysis. Re-epithelialization, granulation tissue formation, collagen deposition, and angiogenesis are some of the key parameters significantly boosted by ZnO loaded composite NF membranes. Based on extensive characterization and biological evaluation, the PSZ3 NF membrane has turned out to be a potential candidate for wound healing applications.

Flexible and reusable carbon nano-fibre membranes for airborne contaminants capture.

Airborne aerosol pollutants generated from combustion vehicles exhausts, industrial facilities and microorganisms represent serious health challenges. Although membrane separation has emerged as a technique of choice for airborne contaminants removal, allowing for both size exclusion and surface adsorption. Here, electrospun carbon nanofibre mats were formed from poly(acrylonitrile) by systematic stabilization and carbonization processes to generate flexible and self-standing membranes for air filtration. The great mechanical flexibility of the electrospun carbon-nanofibre membranes was achieved through extreme quenching conditions on a carbon fibre processing line, allowing for complete carbonization in just 3 min. The carbonized nanofibre membranes, with fibre diameters in the range of 218 to 565 nm exhibited modulus of elasticity around 277.5 MPa. The samples exhibited air filtration efficiencies in the range of 97.2 to 99.4% for aerosol particle in the size of 300 nm based on face velocity, higher than benchmark commercial glass fibre (GF) air filters. The carbonized electrospun nanofibre membranes also yielded excellent thermal stability withstanding temperatures up to 450 °C, thus supporting the development of autoclavable and recyclable membranes. This significant and scalable strategy provides opportunities to mass-produce reusable air filters suitable for otherwise complex airborne pollutants, including volatile organic carbons and bio-contaminants, such as viruses.

PLCL/Silk fibroin based antibacterial nano wound dressing encapsulating oregano essential oil: Fabrication, characterization and biological evaluation.

The use of natural biocompatible drugs is highly desirable in wound dressing compared to synthetic chemicals. Oregano essential oil (OEO) is a promising natural compound with marked antibacterial, antioxidant and anti-inflammatory activities. The topical delivery of OEO may result in lower therapeutic efficacy and irritation to the skin. Moreover, OEO is a volatile compound results in instability as well. To overcome these drawbacks, we successfully encapsulated OEO in Poly (L-lactide-co-caprolactone) (PLCL)/ Silk fibroin (SF) nanofibers membrane (NF) and achieved the encapsulation efficiency (%) up to 59.14 ± 0.58. The fabricated membranes were undergone through physicochemical as well as biological evaluation. SEM characterization revealed that OEO could be successfully encapsulated maintaining a smooth profile of nanofibers. The biocompatibility of the NF membrane was confirmed by cytotoxicity assay. Antibacterial results indicated that OEO containing nanofibrous membranes are highly active against both gram-positive and gram-negative bacteria. The result revealed that 5% is the optimized concentration of OEO capable to completely inhibit bacterial growth. Moreover, the NF membranes were evaluated for their in vivo wound healing potential. The results confirmed that OEO containing NF membrane is not only capable to accelerate the wound contraction but also enhances the quality of wound healing confirmed through histology analysis. H&E and Masson's trichrome staining indicated the neo-epithelialization, granulation tissue formation, angiogenesis, and collagen deposition in a group treated with PLCL/SF/5% OEO. Based on the physicochemical and biological evaluation, PLCL/SF/5% OEO NF membrane can be considered as a potential wound dressing candidate.

Blood Pressure Sensors: Materials, Fabrication Methods, Performance Evaluations and Future Perspectives.

Advancements in materials science and fabrication techniques have contributed to the significant growing attention to a wide variety of sensors for digital healthcare. While the progress in this area is tremendously impressive, few wearable sensors with the capability of real-time blood pressure monitoring are approved for clinical use. One of the key obstacles in the further development of wearable sensors for medical applications is the lack of comprehensive technical evaluation of sensor materials against the expected clinical performance. Here, we present an extensive review and critical analysis of various materials applied in the design and fabrication of wearable sensors. In our unique transdisciplinary approach, we studied the fundamentals of blood pressure and examined its measuring modalities while focusing on their clinical use and sensing principles to identify material functionalities. Then, we carefully reviewed various categories of functional materials utilized in sensor building blocks allowing for comparative analysis of the performance of a wide range of materials throughout the sensor operational-life cycle. Not only this provides essential data to enhance the materials' properties and optimize their performance, but also, it highlights new perspectives and provides suggestions to develop the next generation pressure sensors for clinical use.

Advanced fabrication for electrospun three-dimensional nanofiber aerogels and scaffolds.

Electrospinning is a versatile strategy for creating nanofiber materials with various structures, which has broad application for a myriad of areas ranging from tissue engineering, energy harvesting, filtration and has become one of the most important academic and technical activities in the field of material science in recent years. In addition to playing a significant role in the construction of two-dimensional (2D) nanomaterials, electrospinning holds great promise as a robust method for producing three-dimensional (3D) aerogels and scaffolds. This article reviews and summarizes the recent advanced methods for fabricating electrospun three-dimensional nanofiber aerogels and scaffolds, including gas foaming, direct electrospinning of 3D nanofibrous scaffold, short nanofibers assembling into 3D aerogels/scaffolds, 3D printing, electrospray, origami and cell sheet engineering, centrifugal electrospinning, and other methods. Besides, intriguing formation process, crosslinking pathway, properties, and applications of 3D aerogels and scaffolds are also introduced. Taken together, these aerogels and scaffolds with various excellent features present tremendous potential in various fields.

Effect of elasticity on electrospun styrene-butadiene-styrene fibrous membrane cell culture behaviors.

In this study, elastic styrene-butadiene-styrene (SBS), non-elastic SBS and their blends at different ratios were electrospun into fibrous membranes and their cell biocompatibility was evaluated. The as-spun fibers showed an average fiber diameter of 2 µm, and the fibrous membranes had pore size of 8 ± 0.01 µm. The blending ratios of the elastic with non-elastic SBSs showed little effect on fibrous structure, but affected the mechanical properties. All SBS membrane showed no cytotoxicity on endothelial cells (ECs). ECs attached and proliferated on all the SBS fibrous membrane scaffolds regardless of their elasticity. ECs maintained their polygonal shape on the scaffolds and they tended to orient along the fiber length. The SBS fibrous samples with elastic:non-elastic SBS weight ratios of 1:1 and 2:3 showed better cell viability than that of elastic and non-elastic SBS.