Detoxification activity of bioactive food compounds against ethanol-induced injuries and hangover symptoms: A review.

Alcohol drinking is a popular activity among adolescents in many countries, largely due to its pleasant, relaxing effects. As a major concern, ethanol consumption put the drinkers at risk of nutrients' deficiency due to the disordered eating, anorexia, and malabsorption of nutrients. Moreover, alcohol drinking may lead to the development of hangover symptoms including diarrhea, thirsty, fatigue, and oxidative stress. A broad range of functional food components with antioxidant and/or anti-inflammatory properties including pectin, aloe vera polysaccharides, chito-oligosaccharides, and other herbal components have been explored due to their detoxification effects against ethanol. The underlying anti-hangover mechanisms include reducing the intestinal absorption of ethanol or its metabolites, increasing the activity of ethanol metabolizing enzymes, development of fatty acid ß-oxidation in mitochondria, inhibition of inflammatory response, blocking the target receptors of ethanol in the body, and possession of antioxidant activity under the oxidative stress developed by ethanol consumption. Therefore, the development of bioactive food-based therapeutic formula can assist clinicians and also drinkers in the alleviation of alcohol side effects.

Effect of Enamel Pretreatment Using Er,Cr:YSGG Laser Irradiation on Micro-shear Bond Strength of a Self-etch Fissure Sealant.

Fissure sealant application is an efficient method for dental caries prevention. Self-etch fissure sealants (SE-FS) eliminate the separate etching step for bonding. The present study investigated the micro-shear bond strength (µSBS) of a SE-FS (Prevent seal®, Itena©, Paris, France) to enamel pretreated with different methods including Er,Cr:YSGG laser, under noncontaminated and saliva-contaminated conditions. Sixty human premolars were sectioned into halves and randomly assigned into two groups of saliva-contaminated and noncontaminated. Each group was further divided into six subgroups (N = 10) of different enamel pretreatment methods: (Laser+SE-FS), (Acid-etch+SE-FS), (Laser+Acid-etch+SE-FS), (Mechanical preparation+SE-FS), (SE-FS), and (Acid-etch+Bonding+Conventional fissure sealant) as positive control. The µSBS of the sealant material to enamel was measured in all subgroups. The two-way ANOVA and Tukey tests were applied at P < 0.05. Saliva contamination had a significant effect on µSBS (P < 0.001), while pretreatment with laser or acid etching did not significantly affect the µSBS (P = 0.251). The µSBS of SE-FS to untreated enamel surface was significantly lower than the positive control (P = 0.035). The µSBS value in the subgroup receiving laser+etching+SE-FS was significantly higher than the remaining five subgroups (P < 0.001). Other pairwise comparisons were not statistically significant (P > 0.05). Acid-etch and Er,Cr:YSGG laser exert a synergic effect on µSBS of Prevent Seal®, irrespective of saliva contamination.

Effect of Hibiscus sabdariffa and Camellia synensis extracts on microbial, antioxidant and sensory properties of ice cream.

Herbal extracts have been widely used by consumers for food fortification and medical purposes worldwide and are focused in traditional medicine in recent years. At this study, we aimed to examine the antimicrobial, antioxidant and sensory characteristics of ice creams fortified with different combinations of Hibiscus sabdariffa and Camellia synensis determined by Design of Experiments software. Levels of 10-100 and 40-400 mg/kg for Hibiscus sabdariffa and Camellia synensis extracts, respectively, were selected and experiments were conducted by central composite design. Generally, 13 runs were introduced by the software and followed in laboratory for analysis. Antimicrobial activity was studied against Escherichia coli and Staphylococcus aureus as indicators of gram negative and gram positive bacteria. Results showed that all combinations were active against both bacteria but Staphylococcus aureus was more sensitive than Escherichia coli. Importantly, Camellia synensis was more effective than Hibiscus sabdariffa in both antimicrobial and antioxidant experiments but sensory panelists selected the sample containing lowest concentrations of both extracts. However, frequent consumption of low-dose fortified dairies with Hibiscus sabdariffa and Camellia synensis could be helpful for consumers interested in functional foods.

Food Behaviors and Its Association with Hypertension and Cardiovascular Diseases in Sowme'eh Sara (North of Iran): The PERSIAN Guilan Cohort Study (PGCS).

Food behavior and dietary pattern are major parameters affecting the health status of people. The objective of this study was investigation of food behaviors in people inhabited in North of Iran to find out association of the effective indices (related to salt and fried foods) with hypertension and other cardiovascular diseases (CVDs). This large cross-sectional study was conducted on 10,520 participants and their sociodemographic, medical, and food behavior information were evaluated. Association of salt intake with CVDs and stroke was studied by portfolio at risk (PAR) formula. Association of food behavior with hypertension and CVDs was surveyed by chi-square test. Differences were significant at P≤0.05. Analysis of medical information revealed that 43.18% and 8.18% of the participants had hypertension and CVDs, respectively; mostly in women. Significant association was observed between salt-related behaviors and hypertension in the participants. Regarding salt intake, higher PARs were calculated in women than men (2.26 vs. 1.88 for PARCVDs and 3.66 vs. 3.05 for PARstroke), and urban than rural inhabitants (4.56 vs. 3.66 for PARCVDs and 7.27 vs. 5.88 for PARstroke). No significant contribution was observed between oil-related behaviors and CVDs. The majority of participants were well-informed about appropriate preparation and consumption of fried foods but not a healthy behavior about salt intake. Considering the significant association of salt-related behaviors with hypertension, conducting educational programs by healthcare practitioners in the population is suggested.

The prevalence of ataxia telangiectasia mutated (ATM) variants in patients with breast cancer patients: a systematic review and meta-analysis.

Breast cancer is the most common cancer in women, and its high mortality has become one of the biggest health problems globally. Several studies have reported an association between breast cancer and ATM gene variants. This study aimed to demonstrate and analyze the relationship between ATM gene polymorphisms and breast cancer prevalence rate. A systematic literature review was undertaken using the following databases: Medline (PubMed), Web of sciences, Scopus, EMBASE, Cochrane, Ovid, and CINHAL to retrieve all cross-sectional studies between January 1990 and January 2020, which had reported the frequency of ATM variants in patients with breast cancer. A random-effects model was applied to calculate the pooled prevalence with a 95% confidence interval. The pooled prevalence of ATM variants in patients with breast cancer was 7% (95% CI: 5-8%). Also, the pooled estimate based on type of variants was 6% (95% CI: 4-8%; I square: 94%; P: 0.00) for total variants¸ 0% (95% CI: 0-1%; I square: 0%; P: 0.59) for deletion variants, 12% (95% CI: 7-18%; I square: 99%; P: 0.00) for substitution variants, and 2% (95% CI: 4-9%; I square: 67%; P: 0.08) for insertion variants. This meta-analysis showed that there is a significant relationship between ATM variants in breast cancer patients. Further studies are required to determine which of the variants of the ATM gene are associated with BRCA mutations.

The tissue expression of MCT3, MCT8, and MCT9 genes in women with breast cancer.

BACKGROUND: Breast cancer (BC) is a common malignancy with a high mortality rate. Malignant cell transformation is associated with metabolic changes. One group of proteins that are affected is the monocarboxylate transporters (MCTs-SLC16A). The MCTs comprise 14 members, and they play an important role in the growth, proliferation, and metabolism of cancer cells by transporting monocarboxylates such as lactate, pyruvate and thyroid hormones. OBJECTIVE: We aimed to evaluate the expression of MCT3 (SLC16A8), MCT8 (SLC16A2) and MCT9 (SLC16A9) genes in breast cancer samples, comparing to normal adjacent tissues. METHODS: Forty paired breast cancer tumor samples, the adjacent non-tumor and five healthy tissues were collected. Three cancer cell lines (MCF-7, MDA-MB-231, and SKBR3) were also analyzed. The expression of SLC16A8, SLC16A2 and SLC16A9 were assessed using quantitative real-time PCR. The relationship between gene expression with the pathological features of the tumors, and the hormone receptors status of the patient's tumors were also analyzed. RESULTS: There was a significantly lower expression of the MCT3 gene in tumor samples compared to adjacent normal tissue and healthy samples (p value < 0.05). There was a significant difference in the expression of all three candidate genes between the BC tissues and normal tissues, and for the, tissues with different hormone receptor status and the molecular subtypes. Altered MCT8 and MCT9 gene expression was associated with a reduced survival CONCLUSION: MCT3 expression is significantly downregulated in breast cancer tissue. MCT3 may represent a novel therapeutic target in breast cancer patients, or in some hormone receptor subgroups.

The association between ATM variants and risk of breast cancer: a systematic review and meta-analysis.

BACKGROUND: Ataxia telangiectasia-mutated (ATM) gene contributes to repair damaged DNA and to regulate cell cycle; therefore, ATM variants seem to increase breast cancer risk; however, the results are controversial. So we conducted a systematic review and meta-analysis to clarify the pooled association between various ATM variants and the risk of breast cancer. METHODS: The relevant studies were searched through Scopus, Web of Science, PubMed and Cochrane. Stratified and subgroup analyses were performed to explore heterogeneity between studies and assess effects of study quality. The pooled estimates logarithm with standard error logarithm of odds ratio and relative risk with confidence interval were calculated. RESULTS: This study revealed that there is association between ATM variants and the risk of breast cancer; according to the seven adjusted case-control studies, OR of this association was estimated as 1.67 (95%CI: 0.73-3.82), according to nine unadjusted case-control studies, the crude OR was 2.27 (95% CI: 1.17-4.40) and according to two cohorts, the RR was estimated as 1.68 (95% CI: 1.17-2.40). CONCLUSIONS: The ATM variants are associated with an increased risk of breast cancer that ATM V2424G mutation is detected as the most predisposing factor while ATM D1853V, L546V, and S707P variants have the least predictive ability.

Reviewing the recent advances in application of pectin for technical and health promotion purposes: From laboratory to market.

Pectin is natural biopolymer derived from various plant sources and its activity is driven by functional groups. Affinity of pectin and chemical interactions of the active sites to chemicals in media determines fate of adjuvant molecules. Pectin is appropriate co-polymer in modulation of drawbacks of other biopolymers such as low glass transition temperature, low water solubility, and susceptibility to human digestive tract. However, functionality of pectin is improved by its optimized complexation with other chemicals especially in food packaging and tissue engineering. In the last decade, several technical and health-related functions of pectin have been studied through which some products designed and marketed progressively. Pectin-based formulations were commercialized in food, medicine, and radioprotection sectors. It is also advised for alleviation of constipation symptoms. Cost-effectiveness of this multifunctional biopolymer compared to the others that are currently used, has introduced it as a potential alternative for the next years.

National food policies in the Islamic Republic of Iran aimed at control and prevention of noncommunicable diseases.

BACKGROUND: Diet plays an important role in the risk of noncommunicable diseases. In the Islamic Republic of Iran, national activities were started after release of the World Health Organization's (WHO) action plan on prevention and control of noncommunicable diseases. AIMS: This study describes national food policies implemented by the government in order to reduce noncommunicable diseases in the country in line with WHO action plan. METHODS: Newly adopted food standards and regulations linked to noncommunicable diseases from 2013 to 2018 were reviewed and the maximum permitted levels of salt and trans and saturated fats were compared in the old and new standards. Nutritional traffic light labelling to raise public awareness of healthy diets was evaluated. RESULTS: Fifteen food standards associated with eight food items that make up a large share of the daily Iranian food basket and three that make up a small share were evaluated. Policies on salt included reduction in maximum permitted percentage in bread, cheese and doogh (a fermented drink) to 1%, 3% and 0.8%, respectively. For trans and saturated fats, maximum permitted percentages were set as 2-5% and 30-65% of edible oils and fats, respectively. Nutritional traffic light labelling, which indicates the content of salt, sugar, fat and trans fat in foods, has been mandatory for all foods since 2016. CONCLUSIONS: In view of the polices implemented to reduce the salt and fat/oil content of foods, significant decreases in noncommunicable diseases are expected in coming years in the country. However, further studies are needed to show the effectiveness of the interventions.

Genotyping and phylogenic study of Acanthamoeba isolates from human keratitis and swimming pool water samples in Iran.

OBJECTIVE: Acanthamoeba keratitis cause severe corneal infection and lead to poor vision and blindness. This disease is caused by a unicellular amphizoic protozoon called Acanthamoeba spp. that present in different environments. This study aimed to represent the existence and genotyping of Acanthamoeba spp. in patients with keratitis and swimming pool water (SPW) in Tehran Province, Central Iran. METHODS: In this descriptive study, 56 clinical samples were collected from patients with keratitis and 30 water samples were collected from different swimming pools in Tehran Province. All samples were examined based on the morphological and molecular techniques. The genotypes were determined by sequencing the partial of 18S rRNA gene. RESULTS: Of 56 clinical (corneal) and 30 environmental (SPW) samples, 30.3% and 40.0% were positive for Acanthamoeba spp., respectively. According to sequencing analysis, 94.1% of amoebic keratitis isolates were belonged to T4 genotype and only one (5.8%) isolate was belonged to T11 genotype. All genotypes were detected from SPW samples were identified as T4 genotype. CONCLUSION: According to our results, use of contact lens and swimming in pool poses the major risk factor for amoebic keratitis in the studied area (Tehran). Moreover, T4 genotype was the predominant genotype of human keratitis and swimming pool samples there. Consequently, essential and practical measures are urgently needed to prevent subjects against this ocular seriously disease.

Effects of non-digestive polymers used in iron encapsulation on calcium and iron apparent absorption in rats fed by infant formula.

Iron deficiency anemia is a common problem of all ages in developed and developing countries. Various strategies are used by governments and industries to solve this problem. One of these strategies is iron fortification. In the present study, novel iron microcapsules were designed without any changes in their effects on other ingredients in infant milk formulas. Resistant starch-pectin-iron and pectin-iron microparticles were added to infant powdered milk models. Furthermore, animal studies were carried out. Fecal iron and calcium were assessed using flame atomic absorption spectroscopy and inductively coupled plasma optical emission spectroscopy, respectively. Then, apparent iron and calcium absorptions were calculated. Sensory evaluation was carried out on reconstituted powdered milks. Results showed that iron absorption in rats treated by pectin-coated particles was significantly higher than that in controls with no significant effects on calcium absorption. No significant differences were observed in sensory evaluation.

Evaluation of Er,Cr:YSGG Laser Effect on Microshear Bond Strength of a Self-Adhesive Flowable Composite in the Dentin of Permanent Molar: An In Vitro Study.

Aim and Background. Recently, new restorative materials such as self-adhesive flowable composites, because of their simple use and no need to bonding and etching, are considered important, particularly in pediatric dentistry. The aim of this study is to evaluate the effect of Er,Cr:YSGG laser on microshear bond strength of self-adhesive flowable composite on permanent teeth dentin in vitro. Material and Methods. In this experimental study, 40 dentin sections were prepared from healthy third molars and divided into two groups according to their surface preparation by Er,Cr:YSGG laser or without laser, only with silicon carbide paper. In each group, two groups of 10 teeth were treated with self-adhesive flowable composite (Dyad) and conventional flowable composite (acid etch and bonding). Samples were stored in normal saline and after 48 hours their bond strength was measured. The failure mode of samples was observed on stereomicroscope. In order to analyse the results, the one way ANOVA and Tukey's test for multiple comparisons were used. Result. The maximum bond strength was related to conventional flowable composite with laser preparation group (24/21 Mpa). The lowest one was seen in Dyad composite without laser emitting (9/89 Mpa). The statistical difference between this two groups was significant (P value = 0/0038). The microshear bond strength differences between Dyad composite groups with laser preparation (mean = 16/427 ± 1/79) and without laser preparation (mean = 12/85 ± 1/90) were statistically significant too (P value = 0/01). Conclusion. Self-adhesive flowable composite has lower microshear bond strength than conventional flowable composite. Moreover, the laser irradiation as a surface treatment can improve this bond strength.

Relationship of Salivary Lactoferrin and Lysozyme Concentrations with Early Childhood Caries.

Background and aims. Lysozyme and lactoferrin are salivary proteins which play an important role in innate defense mechanisms against bacteria. This study investigated the association of salivary lysozyme and lactoferrin concentrations with early childhood caries (ECC). Materials and methods. This study was carried out on 42 healthy children (age range, 36 to 71 months), of whom 21 were caries free (CF) and 21 had ECC. Disposable needle-less syringes were used to collect unstimulated saliva from buccal and labial vestibules. Fifteen children who had ECC were treated completely and their saliva was collected in the same way for the second time, three months after treatment. Lysozyme and lactoferrin concentrations were measured and recorded by the ELISA method. The intergroup comparisons were carried out using chi-square, Student's t-test and Wilcoxon signed ranked test. A P-value less than 0.05 was considered as statistically significant. Results. The mean concentration of lysozyme was significantly higher in CF group compared with that of ECC group (P = 0.04). Although the mean concentration of lactoferrin in ECC group was higher in comparison with ECC group, the difference was not statistically significant (P = 0.06). After dental treatment, the mean concentrations of lysozyme and lactoferrin did not change in comparison with their concentrations before treatment. Conclusion. ECC may have a relationship with lower concentrations of unstimulated salivary lactoferrin and lysozyme and reduced amounts of these two salivary proteins may be a risk factor for dental caries in children.

A study on the eruption timing of permanent dentition in patients with cerebral palsy.

PURPOSE: This study aimed to determine the average eruption time and sequence of permanent teeth in patients with cerebral palsy (CP) and to compare the results with the established norms for Iranian subjects. METHODS: This cross-sectional study comprised of 207 individuals with CP, 96 boys and 111 girls, ranging from 6 to 19 years. The average age at eruption of permanent teeth, excluding third molars, was given as the mean (± SD) and median in years for each gender. A table of percentiles of the eruption time was also determined. Comparisons were made using t-test at a significance level of 0.05. RESULTS: The sequence of eruption in children with CP was almost similar to the normal. With the exception of the second premolar and the second molar, tooth eruption was advanced in girls compared with boys. There was no difference between the left and right sides of each arch. Mandibular teeth had an earlier eruption time than maxillary teeth except for the second premolar. In general, eruption times of children with CP were later (1-33 months) than those reported previously for healthy children. CONCLUSIONS: Despite the almost similar sequence of eruption, a high tendency to delayed eruption of permanent dentition was observed in children with CP.

Fluoride concentration of bottled water and tap water in tehran, iran.

BACKGROUND AND AIMS: As a result of poor quality of public water supply in many countries, people have recently turned to bottled water consumption, the fluoride content of which is not generally consistent among different brands. This study sought to measure the fluoride concentration of public water supply in comparison with commercial brands of min-eral bottled water available in Tehran, Iran. MATERIALS AND METHODS: Eight different brands of locally produced bottled mineral water and samples of tap water were evaluated for fluoride content. All samples were collected in five equal containers in two summer and winter seasons. The fluoride content in part per million (ppm) was determined using a fluoride Ion Selective Electrode. The data were ana-lyzed using two-way ANOVA. For comparison of the fluoride content between three different brands of bottled water, one-way ANOVA was employed. Sample t-test was used to compare the label and laboratory values of bottled water. RESULTS: The highest concentration of fluoride in a bottled water brand was found to be 0.409 ppm with a pH of 6.67 in summer. There was a significant difference between the mean fluoride level of tap water (0.229 ± 0.079 ppm) and bottled water (0.111 ± 0.122 ppm) (P < 0.001). The measured fluoride concentrations of bottled water were significantly lower than those printed on the labels (P < 0.001). CONCLUSION: Our findings revealed that the mean fluoride level of both bottled and tap water samples evaluated is con-siderably lower than accepted standards.

The effect of Er,Cr:YSGG laser and air abrasion on shear bond strength of a fissure sealant to enamel.

PURPOSE: The authors conducted an in vitro study to evaluate the shear bond strength of a fissure sealant to enamel pretreated with erbium,chromium:yttrium, scandium,gallium,garnet (Er,Cr:YSGG) laser or air abrasion followed by acid etching. METHODS: The authors sectioned extracted sound premolars mesiodistally and used the buccal and lingual surfaces for experimental analysis. They divided specimens randomly into three groups of 15 each according to the enamel surface pretreatment methods: group A, 37 percent phosphoric acid; group B, air abrasion followed by acid etching with 37 percent phosphoric acid; group C, irradiation with Er,Cr:YSGG laser followed by acid etching with 37 percent phosphoric acid. After applying a bonding system, the authors bonded cylinders of sealant to the enamel surfaces by using transparent gelatin tubes (0.7 millimeter in diameter and 1 mm in height) and then polymerized them. They stored all specimens in distilled water at 37 degrees C for 24 hours. They tested shear bond strength by using a universal testing machine with a crosshead speed of 0.5 mm per second. The authors analyzed the data by means of one-way analysis of variance and Tukey-Kramer post hoc tests (alpha = .05). RESULTS: The bond strength of group B specimens was statistically higher than those of group A and group C specimens (P < .05). The authors found no statistically significant differences in shear bond strength between surfaces treated with Er,Cr:YSGG laser and those treated with acid etching alone (P > .05). CONCLUSION: Pretreatment of enamel surfaces with air abrasion increased the bond strength of fissure sealant, but pretreatment with Er,Cr:YSGG laser did not increase the effectiveness of conventional acid etching of enamel in sealant bonds.