A holistic platform for accelerating sorbent-based carbon capture.

Reducing carbon dioxide (CO2) emissions urgently requires the large-scale deployment of carbon-capture technologies. These technologies must separate CO2 from various sources and deliver it to different sinks1,2. The quest for optimal solutions for specific source-sink pairs is a complex, multi-objective challenge involving multiple stakeholders and depends on social, economic and regional contexts. Currently, research follows a sequential approach: chemists focus on materials design3 and engineers on optimizing processes4,5, which are then operated at a scale that impacts the economy and the environment. Assessing these impacts, such as the greenhouse gas emissions over the plant's lifetime, is typically one of the final steps6. Here we introduce the PrISMa (Process-Informed design of tailor-made Sorbent Materials) platform, which integrates materials, process design, techno-economics and life-cycle assessment. We compare more than 60 case studies capturing CO2 from various sources in 5 global regions using different technologies. The platform simultaneously informs various stakeholders about the cost-effectiveness of technologies, process configurations and locations, reveals the molecular characteristics of the top-performing sorbents, and provides insights on environmental impacts, co-benefits and trade-offs. By uniting stakeholders at an early research stage, PrISMa accelerates carbon-capture technology development during this critical period as we aim for a net-zero world.

A Scalable Robust Microporous Al-MOF for Post-Combustion Carbon Capture.

Herein, a robust microporous aluminum tetracarboxylate framework, MIL-120(Al)-AP, (MIL, AP: Institute Lavoisier and Ambient Pressure synthesis, respectively) is reported, which exhibits high CO2 uptake (1.9 mmol g-1 at 0.1 bar, 298 K). In situ Synchrotron X-ray diffraction measurements together with Monte Carlo simulations reveal that this structure offers a favorable CO2 capture configuration with the pores being decorated with a high density of µ2-OH groups and accessible aromatic rings. Meanwhile, based on calculations and experimental evidence, moderate host-guest interactions Qst (CO2) value of MIL-120(Al)-AP (-40 kJ mol-1) is deduced, suggesting a relatively low energy penalty for full regeneration. Moreover, an environmentally friendly ambient pressure green route, relying on inexpensive raw materials, is developed to prepare MIL-120(Al)-AP at the kilogram scale with a high yield while the Metal- Organic Framework (MOF) is further shaped with inorganic binders as millimeter-sized mechanically stable beads. First evidences of its efficient CO2/N2 separation ability are validated by breakthrough experiments while operando IR experiments indicate a kinetically favorable CO2 adsorption over water. Finally, a techno-economic analysis gives an estimated production cost of ≈ 13 $ kg-1, significantly lower than for other benchmark MOFs. These advancements make MIL-120(Al)-AP an excellent candidate as an adsorbent for industrial-scale CO2 capture processes.

When Polymorphism in Metal-Organic Frameworks Enables Water Sorption Profile Tunability for Enhancing Heat Allocation and Water Harvesting Performance.

The development of thermally driven water-sorption-based technologies relies on high-performing water vapor adsorbents. Here, polymorphism in Al-metal-organic frameworks is disclosed as a new strategy to tune the hydrophilicity of MOFs. This involves the formation of MOFs built from chains of either trans- or cis- µ-OH-connected corner-sharing AlO4(OH)2 octahedra. Specifically, [Al(OH)(muc)] or MIP-211, is made of trans, trans-muconate linkers, and cis-µ-OH-connected corner-sharing AlO4(OH)2 octahedra giving a 3D network with sinusoidal channels. The polymorph MIL-53-muc has a tiny change in the chain structure that results in a shift of the step position of the water isotherm from P/P0 ≈ 0.5 in MIL-53-muc, to P/P0 ≈ 0.3 in MIP-211. Solid-state NMR and Grand Canonical Monte Carlo reveal that the adsorption occurs initially between two hydroxyl groups of the chains, favored by the cis-positioning in MIP-211, resulting in a more hydrophilic behavior. Finally, theoretical evaluations show that MIP-211 would allow achieving a coefficient of performance for cooling (COPc) of 0.63 with an ultralow driving temperature of 60 °C, outperforming benchmark sorbents for small temperature lifts. Combined with its high stability, easy regeneration, huge water uptake capacity, green synthesis, MIP-211 is among the best adsorbents for adsorption-driven air conditioning and water harvesting from the air.

Expanding the horizons of porphyrin metal-organic frameworks via catecholate coordination: exploring structural diversity, material stability and redox properties.

Porphyrin based Metal-Organic Frameworks (MOFs) have generated high interest because of their unique combination of light absorption, electron transfer and guest adsorption/desorption properties. In this study, we expand the range of available MOF materials by focusing on the seldom studied porphyrin ligand H10TcatPP, functionalized with tetracatecholate coordinating groups. A systematic evaluation of its reactivity with M(iii) cations (Al, Fe, and In) led to the synthesis and isolation of three novel MOF phases. Through a comprehensive characterization approach involving single crystal and powder synchrotron X-ray diffraction (XRD) in combination with the local information gained from spectroscopic techniques, we elucidated the structural features of the solids, which are all based on different inorganic secondary building units (SBUs). All the synthesized MOFs demonstrate an accessible porosity, with one of them presenting mesopores and the highest reported surface area to date for a porphyrin catecholate MOF (>2000 m2 g-1). Eventually, the redox activity of these solids was investigated in a half-cell vs. Li with the aim of evaluating their potential as electrode positive materials for electrochemical energy storage. One of the solids displayed reversibility during cycling at a rather high potential (∼3.4 V vs. Li+/Li), confirming the interest of redox active phenolate ligands for applications involving electron transfer. Our findings expand the library of porphyrin-based MOFs and highlight the potential of phenolate ligands for advancing the field of MOFs for energy storage materials.

A robust ultra-microporous cationic aluminum-based metal-organic framework with a flexible tetra-carboxylate linker.

Al-based cationic metal-organic frameworks (MOFs) are uncommon. Here, we report a cationic Al-MOF, MIP-213(Al) ([Al18(µ2-OH)24(OH2)12(mdip)6]6Cl·6H2O) constructed from flexible tetra-carboxylate ligand (5,5'-Methylenediisophthalic acid; H4mdip). Its crystal structure was determined by the combination of three-dimensional electron diffraction (3DED) and high-resolution powder X-ray diffraction. The structure is built from infinite corner-sharing chains of AlO4(OH)2 and AlO2(OH)3(H2O) octahedra forming an 18-membered rings honeycomb lattice, similar to that of MIL-96(Al), a scarce Al-polycarboxylate defective MOF. Despite sharing these structural similarities, MIP-213(Al), unlike MIL-96(Al), lacks the isolated µ3-oxo-bridged Al-clusters. This leads to an ordered defective cationic framework whose charge is balanced by Cl- sandwiched between two Al-trimers at the corner of the honeycomb, showing strong interaction with terminal H2O coordinated to the Al-trimers. The overall structure is endowed by a narrow quasi-1D channel of dimension ~4.7 Å. The Cl- in the framework restrains the accessibility of the channels, while the MOF selectively adsorbs CO2 over N2 and possesses high hydrolytic stability.

MOFs with Open Metal(III) Sites for the Environmental Capture of Polar Volatile Organic Compounds.

Metal-Organic Frameworks (MOFs) with open metal sites (OMS) interact strongly with a range of polar gases/vapors. However, under ambient conditions, their selective adsorption is generally impaired due to a high OMS affinity to water. This led previously to the privilege selection of hydrophobic MOFs for the selective capture/detection of volatile organic compounds (VOCs). Herein, we show that this paradigm is challenged by metal(III) polycarboxylates MOFs, bearing a high concentration of OMS, as MIL-100(Fe), enabling the selective capture of polar VOCs even in the presence of water. With experimental and computational tools, including single-component gravimetric and dynamic mixture adsorption measurements, in situ infrared (IR) spectroscopy and Density Functional Theory calculations we reveal that this adsorption mechanism involves a direct coordination of the VOC on the OMS, associated with an interaction energy that exceeds that of water. Hence, MOFs with OMS are demonstrated to be of interest for air purification purposes.

Natural abundance oxygen-17 solid-state NMR of metal organic frameworks enhanced by dynamic nuclear polarization.

The 17O resonances of zirconium-oxo clusters that can be found in porous Zr carboxylate metal-organic frameworks (MOFs) have been investigated by magic-angle spinning (MAS) NMR spectroscopy enhanced by dynamic nuclear polarization (DNP). High-resolution 17O spectra at 0.037% natural abundance could be obtained in 48 hours, thanks to DNP enhancement of the 1H polarization by factors ε(1H) = Swith/Swithout = 28, followed by 1H → 17O cross-polarization, allowing a saving in experimental time by a factor of ca. 800. The distinct 17O sites from the oxo-clusters can be resolved at 18.8 T. Their assignment is supported by density functional theory (DFT) calculations of chemical shifts and quadrupolar parameters. Protonation of 17O sites seems to be leading to large characteristic shifts. Hence, natural abundance 17O NMR spectra of diamagnetic MOFs can thus be used to probe and characterize the local environment of different 17O sites on an atomic scale.

Introducing a Cantellation Strategy for the Design of Mesoporous Zeolite-like Metal-Organic Frameworks: Zr-sod-ZMOFs as a Case Study.

Herein we report novel mesoporous zirconium-based metal-organic frameworks (MOFs) with zeolitic sodalite (sod) topology. Zr-sod-ZMOF-1 and -2 are constructed based on a novel cantellation design strategy. Distinctly, organic linkers are judiciously designed in order to promote the deployment of the 12-coordinated Zr hexanuclear molecular building block (MBB) as a tetrahedral secondary building unit, a prerequisite for zeolite-like nets. The resultant Zr-sod-ZMOFs exhibit mesopores with a diameter up to ≈43 Å, while the pore volume of 1.98 cm3·g-1 measured for Zr-sod-ZMOF-1 is the highest reported experimental value for zeolite-like MOFs based on MBBs as tetrahedral nodes.

Quest for an Optimal Methane Hydrate Formation in the Pores of Hydrolytically Stable Metal-Organic Frameworks.

Porous metal-organic frameworks (MOFs) capable of storing a relatively high amount of dry methane (CH4) in the adsorbed phase are largely explored; however, solid CH4 storage in confined pores of MOFs in the form of hydrates is yet to be discovered. Here we report a rational approach to form CH4 hydrates by taking advantage of the optimal pore confinement in relatively narrow cavities of hydrolytically stable MOFs. Unprecedentedly, we were able to isolate methane hydrate (MH) nanocrystals with an sI structure encapsulated inside MOF pores with an optimal cavity dimension. It was found that confined nanocrystals require cavities slightly larger than the unit cell crystal size of MHs (1.2 nm), as exemplified in the experimental case study performed on Cr-soc-MOF-1 vs smaller cavities of Y-shp-MOF-5. Under these conditions, the excess amount of methane stored in the pores of Cr-soc-MOF-1 in the form of MH was found to be ≈50% larger than the corresponding dry adsorbed amount at 10 MPa. More importantly, the pressure gradient driving the CH4 storage/delivery process could be drastically reduced compared to the conventional CH4-adsorbed phase storage on the dry Cr-soc-MOF-1 (≤3 MPa vs 10 MPa).

Made-to-order porous electrodes for supercapacitors: MOFs embedded with redox-active centers as a case study.

In this work, a pre-designed Zr-based-MOF encompassing an organic linker with a redox active core is synthesized and its structure-property relationship as a supercapacitor electrode is investigated. An enhanced performance is revealed by the combination of this MOF's high porosity and redox core incorporation, which alters its double-layer and pseudocapacitance, respectively. An increase in the capacitance performance by a factor of two is achieved via post-synthetic structure rigidification using organic pillars.

Trianglamine-Based Supramolecular Organic Framework with Permanent Intrinsic Porosity and Tunable Selectivity.

Here we introduce for the first time a metal-free trianglamine-based supramolecular organic framework, T-SOF-1, with permanent intrinsic porosity and high affinity to CO2. The capability of tuning the pore aperture dimensions is also demonstrated by molecular guest encapsulation to afford excellent CO2/CH4 separation for natural gas upgrading.

Hydrogen-Bonded Open-Framework with Pyridyl-Decorated Channels: Straightforward Preparation and Insight into Its Affinity for Acidic Molecules in Solution.

A hydrogen-bonded open framework with pores decorated by pyridyl groups was constructed by off-charge-stoichiometry assembly of protonated tetrakis(4-pyridyloxymethyl)methane and [Al(oxalate)3 ]3- , which are the H-bond donor and acceptor of ionic H-bond interactions, respectively. This supramolecular porous architecture (SPA-2) has 1 nm-large pores interconnected in 3D with large solvent-accessible void (53 %). It demonstrated remarkable affinity for acidic organic molecules in solution, which was investigated by means of various carboxylic acids including larger drug molecules. Competing sorption between acetic acid and its halogenated homologues evidenced good selectivity of the porous material for the halogenated acids. The gathered results, including a series of guest@SPA-2 crystal structures and HRMAS-NMR spectra, suggest that the efficient sorption exhibited by the material relies not only on an acid-base interaction. The facile release of these guest molecules under neutral conditions makes this SPA a carrier of acidic molecules.

Adaptability of the metal(iii,iv) 1,2,3-trioxobenzene rod secondary building unit for the production of chemically stable and catalytically active MOFs.

The use of a 5,10,15,20-tetrakis(3,4,5-trihydroxyphenyl)porphyrin has yielded a new MOF based on M-1,2,3-trioxobenzene chains that can be made of M = Zr(iv) or RE(iii) (RE = rare earth), showing a very high and limited chemical stability, respectively. The robust metallated Zr-analogue, Co-MIL-173(Zr), has proven to be a heme-like heterogeneous catalyst suitable for aerobic oxidation of hydrocarbons.

Titanium coordination compounds: from discrete metal complexes to metal-organic frameworks.

Owing to their promise in photocatalysis and optoelectronics, titanium based metal-organic frameworks (MOFs) are one of the most appealing classes of MOFs reported to date. Nevertheless, Ti-MOFs are still very scarce because of their challenging synthesis associated with a poor degree of control of their chemistry and crystallization. This review aims at giving an overview of the recent progress in this field focusing on the most relevant existing titanium coordination compounds as well as their promising photoredox properties. Not only Ti-MOFs but also Ti-oxo-clusters will be discussed and particular interest will be dedicated to highlight the different successful synthetic strategies allowing to overcome the still "unpredictable" reactivity of titanium ions, particularly to afford crystalline porous coordination polymers.

Synthesis Optimization, Shaping, and Heat Reallocation Evaluation of the Hydrophilic Metal-Organic Framework MIL-160(Al).

The energy-storage capacities of a series of water-stable porous metal-organic frameworks, based on high-valence metal cations (Al3+ , Fe3+ , Cr3+ , Ti4+ , Zr4+ ) and polycarboxylate linkers, were evaluated under the typical conditions of seasonal energy-storage devices. The results showed that the microporous hydrophilic Al-dicarboxylate MIL-160(Al) exhibited one of the best performances. To assess the properties of this material for space-heating applications on a laboratory pilot scale with an open reactor, a new synthetic route involving safer, greener conditions was developed. This led to the production of MIL-160(Al) on a 400 g scale, before the material was shaped into pellets through a wet-granulation method. The material exhibited a very high energy-storage capacity for a physical-sorption material (343 Wh kg-1 ), which is in full agreement with the predicted value.

Crystal structure dependent in vitro antioxidant activity of biocompatible calcium gallate MOFs.

Two novel 3-D coordination polymers, denoted MIL-155 and MIL-156 (MIL stands for Materials Institute Lavoisier), built up from calcium and the naturally occurring gallic acid (H4gal), have been hydrothermally synthesized and their crystal structures were determined by single-crystal X-ray diffraction. These solids are based on different inorganic subunits: infinite chains of edge-sharing dimers of CaO7 polyhedra linked through partially deprotonated gallate ligands (H2gal2-) for MIL-155 or [Ca2(H2O)(H2gal)2]·2H2O, and ribbon-like inorganic subunits containing both eight-fold or six-fold coordinated CaII ions linked through fully deprotonated gallate ligands (gal4-) for MIL-156 or [Ca3K2(H2O)2(gal)2]·nH2O (n∼ 5). Both solids contain small channels filled with water molecules, with, however no accessible porosity towards N2 at 77 K. MIL-155 and MIL-156 were proven to be biocompatible, as evidenced by in vitro assays (viability and cell proliferation/death balance). While the high chemical stability of MIL-156 makes it almost bioinert, the progressive degradation of MIL-155 leads to an important protective antioxidant effect, associated with the release of the bioactive gallate ligand.

Investigating the Case of Titanium(IV) Carboxyphenolate Photoactive Coordination Polymers.

The reactivity of 2,5-dihydroxyterephthalic acid (H4DOBDC) with titanium(IV) precursors was thoroughly investigated for the synthesis of metal-organic frameworks under solvothermal conditions. Four crystalline phases were isolated whose structures were studied by a combination of single-crystal or powder X-ray diffraction and solid-state NMR. The strong coordination ability of the phenolate moieties was found to favor the formation of isolated TiO6 octahedra bearing solely organic ligands in the resulting structures, unless hydrothermal conditions and precondensed inorganic precursors are used. It is worth noting that these solids strongly absorb visible light, as a consequence of the ligand-to-metal charge transfer (LMCT) arising from Ti-phenolate bonds. Preliminary photocatalytic tests suggest that one compound, namely, MIL-167, presents a higher activity for hydrogen evolution than the titanium carboxylate MIL-125-NH2 but that such an effect cannot be directly correlated with its improved light absorption feature.

A Robust Infinite Zirconium Phenolate Building Unit to Enhance the Chemical Stability of Zr MOFs.

A novel Zr-chain based MOF, namely MIL-163, was designed and successfully synthesized using a bis-1,2,3-trioxobenzene ligand. Endowed with large square-shaped channels of 12 Šwidth, it shows remarkable water uptake (ca. 0.6 cm(3) g(-1) at saturating vapor pressure) and a remarkable stability in simulated physiological media, where archetypical Zr carboxylate MOFs readily degrade.

A robust nanoporous supramolecular metal-organic framework based on ionic hydrogen bonds.

Hydrogen-bond assembly of tripod-like organic cations [H3 -MeTrip](3+) (1,2,3-tri(4'-pyridinium-oxyl)-2-methylpropane) and the hexa-anionic complex [Zr2 (oxalate)7 ](6-) leads to a structurally, thermally, and chemically robust porous 3D supramolecular framework showing channels of 1 nm in width. Permanent porosity has been ascertained by analyzing the material at the single-crystal level during a sorption cycle. The framework crystal structure was found to remain the same for the native compound, its activated phase, and after guest resorption. The channels exhibit affinities for polar organic molecules ranging from simple alcohols to aniline. Halogenated molecules and I2 are also taken up from hexane solutions by this unique supramolecular framework.

Tetradihydrobenzoquinonate and tetrachloranilate Zr(IV) complexes: single-crystal-to-single-crystal phase transition and open-framework behavior for K4Zr(DBQ)4.

The molecular complexes K4[Zr(DBQ)4] and K4[Zr(CA)4], where DBQ(2-) and CA(2-) stand respectively for deprotonated dihydroxybenzoquinone and chloranilic acid, are reported. The anionic metal complexes consist of Zr(IV) surrounded by four O,O-chelating ligands. Besides the preparation and crystal structures for the two complexes, we show that in the solid state the DBQ complex forms a 3-D open framework (with 22% accessible volume) that undergoes a crystal-to-crystal phase transition to a compact structure upon guest molecule release. This process is reversible. In the presence of H2O, CO2, and other small molecules, the framework opens and accommodates guest molecules. CO2 adsorption isotherms show that the framework breathing occurs only when a slight gas pressure is applied. Crystal structures for both the hydrated and guest free phases of K4[Zr(DBQ)4] have been investigated.