An in-depth analysis and review of management strategies for E-waste in the south Asian region: A way forward towards waste to energy conversion and sustainability.

The soaring rise of electronic and electrical waste (E-waste) leads to significant challenges to the South Asian region, urging for incorporating comprehensive assessment and management strategies. The research dives into the intricacies of E-waste and examines how regulatory barriers, public ignorance, and the limited lifespan of electronic devices all contribute to the significant production of E-waste. This study emphasizes the vital need for ongoing and appropriate management practices by bringing attention to the short lifespan of electronic devices and the resulting generation of E-waste. This work also addresses the increased risks that people who live close to informal recycling sites for electronic waste face, as well as the dangerous substances that are found in them and how they harm the environment and human health. Furthermore, in order to promote circular economies and increase productivity, the study assesses management practices in both developed and developing nations, placing special emphasis on component reuse and recycling. Along with addressing the grave consequences of the illicit E-waste trade on the environment, particularly in developing nations, this review attempts to enlighten stakeholders and policymakers about the vital need for coordinated efforts to address the issues related to E-waste in the South Asian region by offering insights into E-waste assessment and management techniques.

Electronical Conductivity Improvement of Carbon-Based Slurry Electrodes Using Carbon Foams for Enhanced Performance in Advanced Electrochemical Energy Storage Systems.

In this work, the novel idea of using a carbon foam to improve slurry electrode systems' electronic and ionic conductivities is introduced and experimentally investigated. Slurries with different mass loadings of 5, 10, and 15 wt % are prepared using steam-activated Norit (from peat) as an active charge carrier with 1 M H2SO4 and distilled water for specifically analyzing the electronic conductivity. A single-pass rectangular flow channel is used in this slurry system, where the channel width is varied from 4.1 to 2.6 cm by changing the current collectors' position and slurry flowing from zero (static) to a maximum of 240 mL·min-1. Carbon foams with two different thicknesses of 10 and 6.5 mm and two different pore sizes of 10 pores per inch (PPI) and 5 PPI are used for this investigation. It is observed that application of the carbon foam improves slurry conductivity; with a 10 mm thick, 10 PPI carbon foam, maximum increases of 204% in electronic conductivity and 23% in ionic conductivity are observed for water-based and acid-based slurries, respectively.

Plastic Waste: Challenges and Opportunities to Mitigate Pollution and Effective Management.

The present world is now facing the challenge of proper management and resource recovery of the enormous amount of plastic waste. Lack of technical skills for managing hazardous waste, insufficient infrastructure development for recycling and recovery, and above all, lack of awareness of the rules and regulations are the key factors behind this massive pile of plastic waste. The severity of plastic pollution exerts an adverse effect on the environment and total ecosystem. In this study, a comprehensive analysis of plastic waste generation, as well as its effect on the human being and ecological system, is discussed in terms of source identification with respect to developed and developing countries. A detailed review of the existing waste to energy and product conversion strategies is presented in this study. Moreover, this study sheds light on sustainable waste management procedures and identifies the key challenges to adopting effective measures to minimise the negative impact of plastic waste.

Current scenario and challenges of plastic pollution in Bangladesh: a focus on farmlands and terrestrial ecosystems.

Plastic is considered one of the most indispensable commodities in our daily life. At the end of life, the huge ever-growing pile of plastic waste (PW) causes serious concerns for our environment, including agricultural farmlands, groundwater quality, marine and land ecosystems, food toxicity and human health hazards. Lack of proper infrastructure, financial backup, and technological advancement turn this hazardous waste plastic management into a serious threat to developing countries, especially for Bangladesh. A comprehensive review of PW generation and its consequences on environment in both global and Bangladesh contexts is presented. The dispersion routes of PW from different sources in different forms (microplastic, macroplastic, nanoplastic) and its adverse effect on agriculture, marine life and terrestrial ecosystems are illustrated in this work. The key challenges to mitigate PW pollution and tackle down the climate change issue is discussed in this work. Moreover, way forward toward the design and implementation of proper PW management strategies are highlighted in this study.

Towards the effective E-waste management in Bangladesh: a review.

Nowadays, the electrical and electronic products are a crucial commodity for different purposes of daily life and they are multiplying five times faster than human like mobile phones, which has reached zero to 7.2 billion in only three decades. A 5-10% yearly increase in the amount of used electrical and electronic equipment that are disposed of prudently can cause environmental hazards that have an aversive effect on human health, marine life, contamination of groundwater, and reduces soil's fertility. Management of this enormous influx of electrical and electronic waste is a challenge for developing countries like Bangladesh with barebones solid waste management infrastructure. Inadequacy of public awareness, policies and poor budget in the field of waste management are few of the key factors behind this delineating scenario. In this study, the picture electrical and electronic waste productions in Bangladesh along with the recent E-waste management systems have been presented comprehensively. Based on the study, it was concluded that most of the adapted E-waste management methods are conversational and detached from current technological capability. A set of sustainable E-waste management system has been suggested along with the challenges, which might appear during the implementation of these strategies. Successful implementation of these suggested systems would advance the quality of E-waste management in Bangladesh increasing the current 35% overall E-waste recycling rate and offer enormous energy from the waste.

Towards the effective plastic waste management in Bangladesh: a review.

The plastic-derived product, nowadays, becomes an indispensable commodity for different purposes. A huge amount of used plastic causes environmental hazards that turn in danger for marine life, reduces the fertility of soil, and contamination of ground water. Management of this enormous plastic waste is challenging in particular for developing countries like Bangladesh. Lack of facilities, infrastructure development, and insufficient budget for waste management are some of the prime causes of improper plastic management in Bangladesh. In this study, the route of plastic waste production and current plastic waste management system in Bangladesh have been reviewed extensively. It emerges that no technical and improved methods are adapted in the plastic management system. A set of the sustainable plastic management system has been proposed along with the challenges that would emerge during the implementation these strategies. Successful execution of the proposed systems would enhance the quality of plastic waste management in Bangladesh and offers enormous energy from waste.

Progress in ambient assisted systems for independent living by the elderly.

One of the challenges of the ageing population in many countries is the efficient delivery of health and care services, which is further complicated by the increase in neurological conditions among the elderly due to rising life expectancy. Personal care of the elderly is of concern to their relatives, in case they are alone in their homes and unforeseen circumstances occur, affecting their wellbeing. The alternative; i.e. care in nursing homes or hospitals is costly and increases further if specialized care is mobilized to patients' place of residence. Enabling technologies for independent living by the elderly such as the ambient assisted living systems (AALS) are seen as essential to enhancing care in a cost-effective manner. In light of significant advances in telecommunication, computing and sensor miniaturization, as well as the ubiquity of mobile and connected devices embodying the concept of the Internet of Things (IoT), end-to-end solutions for ambient assisted living have become a reality. The premise of such applications is the continuous and most often real-time monitoring of the environment and occupant behavior using an event-driven intelligent system, thereby providing a facility for monitoring and assessment, and triggering assistance as and when needed. As a growing area of research, it is essential to investigate the approaches for developing AALS in literature to identify current practices and directions for future research. This paper is, therefore, aimed at a comprehensive and critical review of the frameworks and sensor systems used in various ambient assisted living systems, as well as their objectives and relationships with care and clinical systems. Findings from our work suggest that most frameworks focused on activity monitoring for assessing immediate risks, while the opportunities for integrating environmental factors for analytics and decision-making, in particular for the long-term care were often overlooked. The potential for wearable devices and sensors, as well as distributed storage and access (e.g. cloud) are yet to be fully appreciated. There is a distinct lack of strong supporting clinical evidence from the implemented technologies. Socio-cultural aspects such as divergence among groups, acceptability and usability of AALS were also overlooked. Future systems need to look into the issues of privacy and cyber security.

Therapeutic lighting design for the elderly: a review.

AIMS: Research suggests that specialised lighting design is essential to cater for the elderly users of a building because of reduced visual performance with increased age. This review aims to document what is known of the physical and psychological aspects of lighting and their role in promoting a healthy and safe environment for the elderly. METHODS: A methodical review was carried out of published literature on the physical and psychological impacts of light on the elderly. Design standards and guides from professional organizations were evaluated to identify synergies and gaps between the evidence base and current practice. RESULTS: Lighting has been identified as a significant environmental attribute responsible for promoting physical and mental health of the elderly. The evidence related to visual performance was found to be robust. However, guides and standards appeared to have focused mostly on illumination requirements for specific tasks and have lacked detailed guidelines on vertical lighting and luminance design. This review has identified a growing body of evidence on the therapeutic benefits of lighting and its use in treating psychological disorders among the elderly. The experiments using light as a therapy have improved our understanding of the underlying principles, but the integration of therapeutic aspects of lighting in design practice and guidelines is lacking. CONCLUSIONS: While design guidelines discuss the physical needs of lighting for the elderly fairly well, they lack incorporation of photobiological impacts. Despite positive outcomes from research, the implementation of therapeutic aspects of lighting in buildings is still debatable due to insufficient relevant investigations and robustness of their findings. Collaborations between designers and physicians can contribute in delivering customised lighting solutions by considering disease types and needs. Further investigation needs to be carried out for translating therapeutic benefits to photometric units to implement them in building lighting design.