RESUMEN
Localized surface plasmon resonance in capacitively-coupled metallic nanoparticle dimers accompanied by a substantial local field enhancement in the interparticle gap area can enable boosting of nonlinear optical effects. In this paper, we analyze optical bistability in a plasmonic spherical dimer wrapped by a mutual nonlinear shell. In the common graphical post-processing technique of optical bistability, it is assumed that the refractive index change is homogeneous throughout the whole shell. However, we resolve this issue by taking into account the inhomogeneous nature of the power density in the dimer and linking the refractive index change to the local intensity inside the shell. The hysteresis branches of the normalized scattering and extinction cross-sections, as well as electric near-field strength, were derived by increasing and decreasing the driving field intensity. The analysis shows that optical bistability in the dimer with a 3 nm gap can be achieved at switching intensities of about 375 kW cm-2 and 225 kW cm-2, where each stable state of the C-Sh dimer corresponds to a certain plasmonic mode. The range of driving field intensities can be further decreased by considering smaller interparticle distances. The influence of the nonlinear shell on the spectral response is also examined. Suggested configurations distributed on a planar dielectric substrate have potential applications as all-optical switches and memory elements.
RESUMEN
The resonant interaction of a dielectric-coated conductive rod with the X-band microwave field is investigated. The magnetic field distribution of the Goubau standing radial surface waves was experimentally visualized by using a thermo-elastic optical indicator microscope, and the corresponding electric field distribution was determined via numerical simulations. These field distributions are characterized by a certain pattern of antinodes distinctive for standing waves. An analysis of these field distributions allows one to couple a coated rod with a cut Goubau line. A rod placed in the gap region perpendicular to the Goubau line results in a sharp rejection band in the transmission spectrum which is extremely sensitive to the changes in the surrounding media. The shifting rate of the resonance as a function of the dielectric shell thickness is approximately 1.4 GHz/mm. The Q-factor of copper rods depends on their size and dielectric shell thickness. Longer rods with more energy localization areas have higher Q-factors, typically 1.7 times higher (12.7 vs. 7.5). Moreover, incorporating a dielectric shell enhances energy confinement and can elevate the Q-factor by as much as 22 %. When a 25 mm Cu rod is situated inside a cut Goubau line system, the Q-factor values are significantly higher, with a ratio of 275 to 13. With the addition of a dielectric shell, the Q-factor can be elevated by 58 %. The versatility of the proposed controllable system makes it possible to tune the operating spectrum towards higher GHz and THz frequencies.