RESUMEN
Density functional theory (DFT) calculations allow us to reproduce the SERS (surface-enhanced Raman scattering) spectra of molecules adsorbed on nanostructured metal surfaces and extract the most information this spectroscopy is potentially able to provide. The latter point mainly concerns the anchoring mechanism and the bond strength between molecule and metal as well as the structural and electronic modifications of the adsorbed molecule. These findings are of fundamental importance for the application of this spectroscopic technique. This review presents and discusses some SERS-DFT studies carried out in Italy as a collaboration between the universities of Modena and Reggio-Emilia and of Florence, giving an overview of the information that we can extract with a combination of experimental SERS spectra and DFT modeling. In addition, a selection of the most recent studies and advancements on the DFT approach to SERS spectroscopy is reported with commentary.
RESUMEN
The surface-enhanced Raman scattering (SERS) spectra of piperidine adsorbed on silver/chloride colloids were studied by a combined density functional theory (DFT)/time dependent DFT (TD-DFT) approach. The mechanism of chemical enhancement on the Raman signals is due to at least two contributions: the first comes from the changes in the molecular force constants and the dynamic polarizabilities of the normal modes, when the molecule is chemisorbed. DFT calculations satisfactorily reproduce the SERS spectra of piperidine adsorbed on silver, showing that the species formed on the silver particle is a complex formed by a deprotonated piperidine linked to a silver cation. A second contribution to the SERS chemical enhancement is due to a resonance Raman effect occurring when the wavelength of the Raman excitation falls within the electronic excitation band of the molecule/metal complex. Actually, the SERS spectra of piperidine show a significant dependence on the wavelength of the laser excitation, with a marked enhancement in the green-light region. TD-DFT calculations on the most-probable complex explain this behavior, because a strong excitation band of the complex is calculated in the green spectral region. This pinpoints that a resonance between the exciting radiation and the absorption band of this complex is responsible for this enhancement effect.
RESUMEN
Magneto-plasmonic nanoparticles constituted of gold and iron oxide were obtained in an aqueous environment by laser ablation of iron and gold targets in two successive steps. Gold nanoparticles are embedded in a mucilaginous matrix of iron oxide, which was identified as magnetite by both microscopic and spectroscopic analyses. The plasmonic properties of the obtained colloids, as well as their adsorption capability, were tested by surface-enhanced Raman scattering (SERS) spectroscopy using 2,2'-bipyridine as a probe molecule. DFT calculations allowed for obtaining information on the adsorption of the ligand molecules that strongly interact with positively charged surface active sites of the gold nanoparticles, thus providing efficient SERS enhancement. The presence of iron oxide gives the bimetallic colloid new possibilities of adsorption in addition to those inherent to gold nanoparticles, especially regarding organic pollutants and heavy metals, allowing to remove them from the aqueous environment by applying a magnetic field. Moreover, these nanoparticles, thanks to their low toxicity, are potentially useful not only in the field of sensors, but also for biomedical applications.
RESUMEN
A Surface-Enhanced Raman Scattering (SERS) spectrum of 4-cyanopyridine (4CNPy) was recorded on silver plasmonic nanoparticles and analyzed by using Density Functional Theory (DFT) calculations. Two simple molecular models of the metal-4CNPy surface complex with a single silver cation or with a neutral dimer (Ag+-4CNPy, Ag2-4CNPy), linked through the two possible interacting sites of 4CNPy (aromatic nitrogen, N, and nitrile group, CN), were considered. The calculated vibrational wavenumbers and intensities of the adsorbate and the isolated species are compared with the experimental Raman and SERS results. The analysis of the DFT predictions and the experimental data indicates that 4CNPy adsorbs preferentially on neutral/charged active sites of the silver nanoparticles through the nitrogen atom of the aromatic ring with a perpendicular orientation.
RESUMEN
We have studied the adsorption of xanthine, a nucleobase present in human tissue and fluids that is involved in important metabolic processes, on citrate-reduced gold colloidal nanoparticles by means of surface-enhanced Raman scattering (SERS), absorption, and X-ray photoelectron spectroscopy (XPS) measurements, along with density functional theory (DFT) calculations. The citrate anions stabilize the colloidal suspensions by strongly binding the gold nanoparticles. However, these anions do not impair the adsorption of xanthine on positively-charged active sites present on the metal surface. We have obtained the Fourier transform (FT)-SERS spectra of adsorbed xanthine by laser excitation in the near infrared spectral region, where interference due to fluorescence emission does not usually occur. In fact, the addition of chloride ions to the Au/xanthine colloid induces the aggregation of the gold nanoparticles, whose plasmonic band is shifted to the near infrared region where there is the exciting laser line of the FT-Raman instrument. Hence, this analytical approach is potentially suitable for spectroscopic determination of xanthine directly in body fluids, avoiding fluorescence phenomena induced by visible laser irradiation.
RESUMEN
Highly stable Ag-SiO2 nanoparticle composites were first obtained by laser ablation of a silver target in an aqueous colloidal dispersion of silica and examined by UV-vis absorption spectroscopy, transmission electron microscopy and Raman spectroscopy. The surface enhanced Raman scattering (SERS) activity of these nanocomposites was tested using 2,2'-bipyridine as a molecular reporter and excitation in the visible and near-IR spectral regions. The computational DFT approach provided evidence of ligand adsorption on positively charged adatoms of the silver nanostructured surface, in a very similar way to the metal/molecule interaction occurring in the corresponding Ag(I) coordination compound.
RESUMEN
Xanthine is a nucleobase, deriving from adenine and guanine by deamination and oxidation processes, which may deposit in the human body causing diseases, similar to uric acid. Here, we have investigated the adsorption of xanthine on silver colloidal nanoparticles by means of surface-enhanced Raman scattering (SERS) with an exciting radiation in the near-infrared spectral region, where interference due to fluorescence does not occur, along with density functional theory calculations of molecule/metal model systems. By adopting a combined experimental and computational approach, we have identified the "marker" SERS bands of xanthine and the tautomer that preferentially binds the silver particles, as well as the molecular group involved in the interaction with metal. This investigation allows using the FT-SERS spectroscopy for biosensory and diagnostic purposes in body fluids, detecting abnormal levels of xanthine, and preventing metabolic diseases.
RESUMEN
4-Dimethylamino-4'-nitrostilbene (DANS), a π-conjugated push-pull molecule, has been investigated by means of a combined spectroscopic and computational approach. When the Raman excitation is close to the visible electronic transition of DANS, vibrational bands not belonging to DANS appear in the spectra, increasing with the laser power. These bands are observed at room temperature in the solid phase, but not at low temperature or in solution, and we interpret them as due to a thermally-activated photoreaction occurring under laser irradiation in the visible spectral region. Density-functional calculations correctly reproducing the electronic and vibrational spectra of DANS, describe the charge-transfer process, indicate that an azo-derivative is the product of the photoreaction of DANS and provide a reasonable interpretation of this process.
RESUMEN
A new synthetic approach for the production of carbon nanomaterials (CNM) decorated with organophosphorus moieties is presented. Three different triphenylphosphine oxide (TPPO) derivatives were used to decorate oxidized multiwalled carbon nanotubes (ox-MWCNTs) and graphene platelets (GPs). The TPPOs chosen bear functional groups able to react with the CNMs by Tour reaction (an amino group), nitrene cycloaddition (an azido group) or CuAAC reaction (one terminal C-C triple bond). All the adducts were characterized by FTIR, Raman spectroscopy, TEM, XPS, elemental analysis and ICP-AES. The cycloaddition of nitrene provided the higher loading on ox-MWCNTs and GPs as well, while the Tour approach gave best results with nanotubes (CNTs). Finally, we investigated the possibility to reduce the TPPO functionalized CNMs to the corresponding phosphine derivatives and applied one of the materials produced as heterogeneous organocatalyst in a Staudinger ligation reaction.
RESUMEN
HYPOTHESIS: Bimetallic nanoparticles made of iron oxide and Ag could be fabricated by pulsed laser ablation of iron and silver targets in pure water by a two-step route. These nanoparticles could exhibit both magnetic and plasmonic properties. EXPERIMENTS: Bimetallic nanoparticles were fabricated by using a focused Nd:YAG nanosecond laser source emitting a 1064nm wavelength radiation and characterized with ζ-potential, Dynamic Light Scattering (DLS), UV-vis absorption, Transmission Electron Microscopy (TEM), High Resolution TEM (HRTEM), Energy Dispersive X-ray Spectrometry (EDX), and Selected Area Electron Diffraction (SAED). The magnetic character of the nanoparticles was ascertained by observing attraction by a magnet and complete removing from the water environment, while their SERS (surface-enhanced Raman scattering) response was checked by decorating them with 2,2'-bipyridine as molecular reporter and performing Raman tests with green (514.5nm) and far-red (785nm) excitation wavelengths. FINDINGS: The observed magnetic attraction was due to magnetite (Fe3O4), the only ferromagnetic iron oxide form evidenced by the characterization tests in the aqueous colloidal system, where silver nanoparticles were also embedded. UV-vis and SERS spectra confirmed the presence of nanostructured silver as plasmonic constituent of the fabricated metal nanoparticles.
RESUMEN
Silver nanoparticles (AgNPs) have increasingly gained importance as antibacterial agents with applications in several fields due to their strong, broad-range antimicrobial properties. AgNP synthesis by pulsed laser ablation in liquid (PLAL) permits the preparation of stable Ag colloids in pure solvents without capping or stabilizing agents, producing AgNPs more suitable for biomedical applications than those prepared with common, wet chemical preparation techniques. To date, only a few investigations into the antimicrobial effect of AgNPs produced by PLAL have been performed. These have mainly been performed by ablation in water with nanosecond pulse widths. We previously observed a strong surface-enhanced Raman scattering (SERS) signal from such AgNPs by "activating" the NP surface by the addition of a small quantity of LiCl to the colloid. Such surface effects could also influence the antimicrobial activity of the NPs. Their activity, on the other hand, could also be affected by other parameters linked to the ablation conditions, such as the pulse width. The antibacterial activity of AgNPs was evaluated for NPs obtained either by nanosecond (ns) or picosecond (ps) PLAL using a 1064 nm ablation wavelength, in pure water or in LiCl aqueous solution, with Escherichia coli and Bacillus subtilis as references for Gram-negative and Gram-positive bacteria, respectively. In all cases, AgNPs with an average diameter less than 10 nm were obtained, which has been shown in previous works to be the most effective size for bactericidal activity. The measured zeta-potential values were very negative, indicating excellent long-term colloidal stability. Antibacterial activity was observed against both microorganisms for the four AgNP formulations, but the ps-ablated nanoparticles were shown to more effectively inhibit the growth of both microorganisms. Moreover, LiCl modified AgNPs were the most effective, showing minimum inhibitory concentration (MIC) values in a restricted range of 1.0-3.7 µg/mL. An explanation is proposed for this result based on the increased surface reactivity of the metal surface due to the presence of positively charged active sites.
RESUMEN
Industrial processing of materials containing quartz induces physico-chemical modifications that contribute to the variability of quartz hazard in different plants. Here, modifications affecting a quartz-rich sand during cast iron production, have been investigated. Composition, morphology, presence of radicals associated to quartz and reactivity in free radical generation were studied on a raw sand and on a dust recovered after mould dismantling. Additionally, cytotoxicity of the processed dust and ROS and NO generation were evaluated on MH-S macrophages. Particle morphology and size were marginally affected by casting processing, which caused only a slight increase of the amount of respirable fraction. The raw sand was able to catalyze OH and CO2(-) generation in cell-free test, even if in a lesser extent than the reference quartz (Min-U-Sil), and shows hAl radicals, conventionally found in any quartz-bearing raw materials. Enrichment in iron and extensive coverage with amorphous carbon were observed during processing. They likely contributed, respectively, to increasing the ability of processed dust to release CO2- and to suppressing OH generation respect to the raw sand. Carbon coverage and repeated thermal treatments during industrial processing also caused annealing of radiogenic hAl defects. Finally, no cellular responses were observed with the respirable fraction of the processed powder.
Asunto(s)
Macrófagos Alveolares/efectos de los fármacos , Cuarzo/química , Animales , Polvo , Hierro , Ratones , Óxido Nítrico/metabolismo , Especies Reactivas de Oxígeno/metabolismo , Dióxido de SilicioRESUMEN
The adsorption of methimazole on gold colloidal nanoparticles was investigated using a combination of surface-enhanced Raman scattering and density functional theory calculations, which allowed identifying the thiolate anion as the molecular species chemically interacting with the active sites of the gold surface, modeled as zero-charge metal adatoms, only through the sulfur atom. This result can be important for the use of these ligand/metal nanohybrids in the process of drug delivery. Moreover, functionalized gold nanoparticles are able to promote the Raman enhancement in the red-light region as well as in the near-infrared, where generally no fluorescence emission occurs. This paves the way for the use of these nanosystems in a biological environment, even in vivo experiments.
Asunto(s)
Oro Coloide/química , Nanopartículas del Metal/química , Metimazol/química , Modelos Moleculares , Teoría Cuántica , Espectrometría RamanRESUMEN
The increasing and urgent demand for clean water requires new approaches for identifying possible contaminants. In the present study, polymer substrates with embedded silver nanoparticles are employed to reveal the presence of traces of nitroaromatic compounds in water on the basis of the surface-enhanced Raman scattering (SERS) effect. These platforms provide an easy and sensitive method of detecting of low concentrations of these organic pollutants in contaminated water.
RESUMEN
Azole derivatives are common inhibitors of copper corrosion due to the chemical adsorption occurring on the metal surface that gives rise to a protective film. In particular, 1,2,4-triazole performs comparable to benzotriazole, which is much more widely used, but is by no means an environmentally friendly agent. In this study, we have analyzed the adsorption of 1,2,4-triazole on copper by taking advantage of the surface-enhanced Raman scattering (SERS) effect, which highlights the vibrational features of organic ligand monolayers adhering to rough surfaces of some metals such as gold, silver and copper. To ensure the necessary SERS activation, a roughening procedure was implemented on the copper substrates, resulting in nanoscale surface structures, as evidenced by microscopic investigation. To obtain sufficient information on the molecule-metal interaction and the formation of an anticorrosive thin film, the SERS spectra were interpreted with the aid of theoretical calculations based on the density functional theory (DFT) approach.
RESUMEN
The adsorption of adenine on silver and gold surfaces has been investigated combining density functional theory calculations with surface-enhanced Raman scattering and angle-resolved X-ray photoelectron spectroscopy measurements, obtaining useful insight into the orientation and interaction of the nucleobase with the metal surfaces.
RESUMEN
Alacranite, As(8)S(9), has been studied by a combined approach based on micro-Raman measurements and ab initio molecular dynamics simulations, with the Car-Parrinello method. The structure of this arsenic sulfide mineral consists of an ordered packing of As(4)S(4) and As(4)S(5) cagelike molecules, with a topology closely resembling that found in the ß-As(4)S(4). The presence in the crystal structure of molecular clusters with permanent dipole moment induces stronger intermolecular interactions than those observed in other arsenic sulfides, making the adoption of ab initio computational methods particularly important for a complete characterization of the structural and spectroscopic properties.
Asunto(s)
Arsenicales/química , Sulfuros/química , Modelos Moleculares , Estructura Molecular , Teoría Cuántica , VibraciónRESUMEN
We investigated the chemisorption of self-assembled monolayers of sulfur-functionalized 4-amino-7-nitrobenzofurazan on gold and silver nanoisland films (NIFs) by means of surface-enhanced fluorescence (SEF) and surface-enhanced Raman scattering (SERS). The ligand is a push-pull molecule, where an intramolecular charge transfer occurs between an electron-donor and an electron-acceptor group, thus exhibiting nonlinear optical properties that are related to both SERS and SEF effects. The presence of different heteroatoms in the molecule ensures the possibility of chemical interaction with both silver and gold substrates. The SERS spectra suggest that furazan is bound to silver via lone pairs of the nitrogen atoms, whereas the ligand is linked to gold via a sulfur atom. Silver NIFs provide more efficient enhancement of both fluorescence and Raman scattering in comparison with gold NIFs. The present SEF and SERS investigation could provide useful information for foreseeing changes in the nonlinear responses of this push-pull molecule.
RESUMEN
A SERS investigation combined with ab initio computational analysis involving Car-Parrinello molecular dynamics simulations and Density Functional Theory approach allows fundamental information to be obtained on the behaviour of thiazole in silver aqueous suspension where solvation and chemisorption processes competitively occur.
RESUMEN
Nanostructured Ag platforms have been obtained by simple chemical procedure and characterized by AFM (atomic force microscopy) measurements, for use in biosensing by means of SERS (surface-enhanced Raman scattering) spectroscopy. The SERS efficiency of these substrates has been verified by microRaman measurements on small RNA chains with different nucleobase content, showing sensitivity near attomole level. It is our opinion that these metal substrates may be widely used as appropriate sensors for detecting biomolecules in many applications concerning medical diagnostics, pharmacological research and nanomaterials technology.