RESUMEN
The molecular orientation of a liquid crystalline (LC) epoxy resin (LCER) on silane coupling surfaces of amorphous soda-lime-silica glass substrates was investigated. The LC epoxy monomer on the silane coupling surfaces of the substrates was revealed to form a smectic A (SmA) phase with planar alignments because of the relatively low surface free energy. An LCER with a curing agent, however, formed a homeotropically aligned SmA structure by curing on a substrate surface modified using a silane coupling agent with amino groups. This formation of homeotropic alignment was considered due to the attribution of the reaction between the amino group on the surface of the substrate and the epoxy group of the LCER. The homeotropic alignment had a relatively high orientation parameter of 0.95. Therefore, it is expected to possess high thermal conductivity and be applied as high-thermal-conductivity adhesives or packaging materials for electrical and electronic devices.
RESUMEN
High-silica CHA-type aluminosilicates (Si/Al molar ratio >100) were synthesized hydrothermally in the absence of fluoride media, where the seed-assisted aging treatment played an important role on the crystallization. These aluminosilicates showed a long catalytic lifetime with high selectivity toward lower olefins in the methanol-to-olefins reaction.
RESUMEN
An organic ligand-free aqueous-phase synthesis of copper (Cu) nanoparticles (NPs) under an air atmosphere was successfully achieved by reducing copper(II) oxide particles with a leaf-like shape in the presence of Ni salts at room temperature. The resulting Cu NPs with a mean particle diameter of ca. 150 nm exhibited low-temperature sintering properties due to their polycrystalline internal structure and ligand-free surface. These Cu NPs were applied to obtain Cu NP-based nanopastes with low-temperature sintering properties, and the resistivities of the obtained Cu electrodes after annealing at 150 °C and 200 °C for 30 min were 64 µΩâcm and 27 µΩâcm, respectively. The bonding strength between oxygen-free Cu plates prepared using the Cu NP-based nanopastes reached 32 MPa after pressure-less sintering at 260 °C for 30 min under a nitrogen atmosphere. The developed manufacturing processes using the developed Cu nanopastes could provide sustainable and low-CO2-emission approaches to obtain Cu electrodes on flexible films and high-strength bonding between metal plates as die-attach materials for power devices under energy- and resource-saving conditions.
RESUMEN
The paired Al species pre-formed in Al-rich amorphous aluminosilicates were transcribed into high-silica CHA-type zeolite frameworks under hydrothermal conditions, which offers a new approach to creating paired Al sites in zeolite frameworks. This Al-pair-rich CHA exhibited a higher Sr2+ uptake than the control CHA zeolite synthesized by the conventional procedure.
RESUMEN
Indium tin oxide (ITO) thin films with low resistivity and high transparency in the visible light region have been prepared on flexible plastic films by a deposition method using water mist containing ITO nanoparticles (NPs) under atmospheric conditions. The ITO NP-mist was generated by ultrasonic irradiation of a water dispersion. Our developed protrusion-rich ITO NPs were applied as the ITO NPs. The ITO NPs show high dispersion stability in water without the use of any dispersant. Comparison investigations revealed that utilization of the ITO NPs played a critical role in fabricating high-performance ITO thin films on flexible films, and the resistivity reached 9.0 × 10-3 Ω cm. The system could be expected to provide promising advances in the development of a mild and sustainable fabrication procedure for ITO thin films under mild atmospheric conditions without the use of expensive vacuum production systems or harmful and environmentally undesirable chemicals.
RESUMEN
This study is focused on surface-modified Fe3O4@SiO2 particles with precisely controlled sizes and shapes applied in magnetorheological (MR) fluids. After the preparation of the monodisperse spindle-shaped and cubic Fe3O4@SiO2 particles, surface modification with dodecyltrimethoxysilane (DTM) was carried out via a silane coupling reaction to increase the dispersion stability of the particles. Afterward, MR fluids were prepared by mixing the DTM-modified Fe3O4@SiO2 particles with silicon oil. Transmission electron microscopy observations demonstrated that spindle-shaped Fe3O4@SiO2 particles could form a more stable chain-like structure than cubic Fe3O4@SiO2 particles upon application of an external magnetic field. The rheological measurements of MR fluids also indicated that the surface modification with DTM, the introduction of anisotropic shapes, and the increase in the particle size all played positive roles in the improvement in MR properties.
RESUMEN
Mordenite (MOR)-type zeolites with a Si/Al molar ratio of up to 13 with crystallite sizes of ca. 60 nm were successfully synthesized from Al-rich aluminosilicates with a Si/Al ratio of 2 and additional SiO2 under seed-assisted hydrothermal conditions for 6 h or longer without any organic structure-directing agents (OSDAs). In stark contrast, under the same hydrothermal conditions for 6 h, control experiments using starting reagent(s), such as Al-poor aluminosilicate, pure SiO2, tetraethyl orthosilicate, and Al(NO3)3, all of which are typically employed for zeolite synthesis, failed to yield MOR-type zeolites. The penta-coordinated Al species, which are present in Al-rich aluminosilicates and are more reactive than the tetra- and hexa-coordinated Al species typically found in alumina and Al-poor aluminosilicates, played a decisive role in the OSDA-free synthesis of MOR-type zeolites.
RESUMEN
For the development of functional thin films with high thermal conductivity, the local ordering structure of a cured liquid crystalline epoxy resin (LCER) droplet was investigated by using synchrotron radiation microbeam small-angle X-ray scattering. The cured LCER in the vicinity of a substrate with low surface free energy was revealed to form a polydomain smectic-A (SmA) structure in which the normal direction of the layers was random in each domain, although the alignment was planar near the air interface. On the other hand, the cured LCER on a substrate with high surface free energy formed a homeotropically aligned SmA structure in the region within 21 µm from the surface of the substrate. Therefore, a 20 µm thick LCER film was fabricated and found to form a homeotropically aligned monodomain-like SmA structure throughout the whole film with a high thermal conductivity (0.81-5.8 W m-1 K-1). This film with a high thermal conductivity is expected to be applicable for adhesion and precoating materials for electrical and electronic devices.
RESUMEN
Vesicles or micelles prepared from amphiphiles with azobenzene (Az) moieties and long alkyl chains have attracted much attention in drug delivery systems. To induce release behavior from smart carriers via trans-cis photoisomerization of the Az groups, UV light exposure is typically used, but it can damage DNA and hardly penetrates cells. In this paper, Az-containing phospholipids without long alkyl tails were designed and synthesized; in these compounds, the end group of the Az moiety was substituted with a -NO2 and -OCH3 group (abbreviated N6 and M6, respectively). N6 self-assembled into H-aggregates with an interdigitated bilayered structure in water through the antiparallel orientation due to π-π interactions of the Az group, the attractive van der Waals forces, and the interactions and bending behavior of the phosphocholine groups. Vesicles showing visible light stimuli-responsive behavior were obtained by mixing N6 and M6, and the release of encapsulated calcein was triggered by visible light.
RESUMEN
Magnetite (Fe3O4) nanoplates with a hexagonal platelet shape were synthesized by two steps: hydrothermal synthesis of iron(iii) oxide (α-Fe2O3) nanoplates followed by wet chemical reduction of the α-Fe2O3 nanoplates. Then, poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of the hexagonal Fe3O4 nanoplates (F) via surface-initiated atom transfer radical polymerization (SI-ATRP), which ensures dispersion stability in organic solvents and ionic liquids. After mixing with 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([Emim+][NTf2 -]), a representative ionic liquid, the resulting PMMA-modified F were found to show good lyotropic liquid-crystalline (LC) behaviour in [Emim+][NTf2 -] and to exhibit a fast response to the application of an external magnetic field. Ultrasmall-angle synchrotron X-ray scattering (USAXS) measurements verified that the PMMA chain length, the weight ratio of the ionic liquid and the external magnetic field could significantly influence the interparticle distance (I D) of the PMMA-modified F in [Emim+][NTf2 -]. In particular, the lyotropic LC phase could be assigned as a nematic phase with a columnar alignment. In addition, the PMMA-modified F maintained a uniaxially aligned nematic columnar structure along the magnetic field direction. Our study also determined the mechanism for the special alignment of the PMMA-modified F under an external magnetic field by analysing the growth axis, the easy magnetic axes, and the interparticle distance of F. The results suggested that the special alignment of the PMMA-modified F was affected by the interparticle interaction caused by the PMMA long chains on F under the magnetic field. Furthermore, the present study revealed that PMMA-modified F exhibited a new magnetic field responsive behaviour that led not only to the formation of a uniaxial alignment structure but also to control of I D with the help of the PMMA soft corona under the application of a magnetic field. These features could prove to be a promising advance towards novel applications of magnetic nanoparticles (NPs), such as functional magnetic fluids, rewritable magnetic switching devices, and smart magneto-electrochemical nanosensors.
RESUMEN
Self-assembled dendronized CdS nanoparticles have been attracting considerable attention because of their photoluminescence properties depending on annealing treatments. In this study, their annealing-induced self-assembled structure was investigated via scanning transmission electron microscopy; thin foil specimens of self-assembled dendronized CdS nanoparticles were prepared by ultramicrotomy and the STEM images revealed their ordered structure and the effect of the annealing treatment. In addition, a structural order belonging to the P213 space group was identified via an autocorrelation analysis. The results indicated that this structural order could be achieved only over a few tens of nanometers.
RESUMEN
Copper nanoparticles (NPs) with an average particle diameter of 50-60 nm were successfully obtained by reducing an aqueous solution of a copper(II)-nitrilotriacetic acid complex with an aqueous hydrazine solution at room temperature under an air atmosphere. Copper NP-based nanopastes were printed onto a glass substrate using a metal screen mask and pressureless sintered under a nitrogen atmosphere at 200 °C for 30 min. The electrical resistivity of the resulting copper electrode was 16 µΩ · cm. For a metal-to-metal bonding test, copper nanopaste was printed on an oxygen-free copper plate, another oxygen-free copper plate was placed on top, and the bonding strength between the copper plates when pressureless sintered under a nitrogen atmosphere at 200 °C for 30 min was 39 MPa. TEM observations confirmed that highly crystalline metal bonding occurred between the copper NPs and the copper plate to introduce the ultrahigh strength. The developed copper NPs could provide promising advances as nanopastes for sustainable fabrication of copper electrodes and die attachment materials for the production of next-generation power semiconductors.
RESUMEN
Substitution of Al atoms in a zeolite framework by catalytic metal atoms has attracted considerable attention because the catalytic behavior can be tuned by the substituted atoms. In the present study, Sn-substituted MFI-type silicates were synthesized using a hydrothermal reaction of an amorphous Si-O-Sn precursor prepared by mechanochemical grinding of SiO2 and Sn(OH)4. The mechanochemical treatment was found to be a key technique for obtaining the amorphous Si-O-Sn precursor, where tetrahedral Sn4+ species were incorporated into the amorphous matrix. The Sn content in the framework of the MFI-type silicates was successfully controlled by the initial HCl/Si molar ratio of the hydrothermal procedures. Optical reflectance measurements revealed that the Sn4+ ions were dispersedly incorporated into the silicate framework while preserving the initial tetrahedrally coordinated species. Infrared results imply that the resulting Sn-substituted MFI-type silicate has Brønsted acid character. Precise control of the Brønsted and Lewis acid properties by Sn doping is a promising approach to the development of novel types of zeolite-based catalytic materials.
RESUMEN
The molecular orientation effect of a liquid crystalline (LC) epoxy resin (LCER) on thermal conductivity was investigated, with the thermal conductivity depending on the surface free energy of amorphous soda-lime-silica glass substrate surfaces modified using physical surface treatments. The LC epoxy monomer was revealed to form a smectic A (SmA) phase with homeotropic alignments on the surfaces of substrates that possess high surface free energies of 71.3 and 72.7 mN m-1, but forming a planar alignment on the surface of a substrate that possesses a relatively low surface free energy of 46.3 mN m-1. The optical microscopy observations and the X-ray analyses revealed that the LC epoxy monomer also induced a homeotropically aligned SmA structure due to cross-linking with a curing agent on the high-free-energy surface. The orientational order parameter of the resulting homeotropic SmA structure was calculated from the grazing incidence small-angle X-ray scattering patterns to be 0.73-0.75. The thermal conductivity of the cross-linked LCER forming a homeotropically aligned SmA structure was also estimated to be 2.0 and 5.8 W m-1 K-1 for the average and maximum in the direction of the Sm layer normal. The value of the thermal conductivity was remarkable among the thermosetting polymers and ceramic glass, and the LCER could be applied for high-thermal-conductive adhesives and packaging materials in electrical and electronic devices.
RESUMEN
Gas sensing with oxide nanostructures is increasingly important to detect gaseous compounds for safety monitoring, process controls, and medical diagnostics. For such applications, sensor sensitivity is one major criterion. In this study, to sensitively detect volatile organic compounds (VOCs) at very low concentrations, we fabricated porous films using SnO2 nanocubes (13 nm) and nanorods with different rod lengths (50-500 nm) that were synthesized by a hydrothermal method. The sensor response to H2 increased with decreasing crystal size; the film made of the smallest nanocubes showed the best sensitivity, which suggested that the H2 sensing is controlled by crystal size. In contrast, the responses to ethanol and acetone increased with increasing crystal size and resultant pore size; the highest sensitivity was observed for a porous film using the longest nanorods. Using the Knudsen diffusion-surface reaction equation, the gas sensor responses to ethanol and acetone were simulated and compared with experimental data. The simulation results proved that the detection of ethanol and acetone was controlled by pore size. Finally, we achieved ultrahigh sensitivity to ethanol; the sensor response (S) exceeded S = 100â¯000, which corresponds to an electrical resistance change of 5 orders of magnitude in response to 100 ppm of ethanol at 250 °C. The present approach based on pore size control provides a basis for designing highly sensitive films to meet the criterion for practical sensors that can detect a wide variety of VOCs at ppb concentrations.
RESUMEN
The solvation behavior of task-specific ionic liquids (TSILs) containing a common, L-histidine derived imidazolium cation [C20H28N3O3](+) and different anions, bromide-[Br](-) and bis(trifluoromethylsulfonyl)amide-[NTF2](-), in water is examined, computationally. These amino acid functionalized ionic liquids (ILs) are taken into account because of their ability to react with rare earth metal salts. It has been noted that the TSIL with [Br](-) is more soluble than its counterpart TSIL with [NTF2](-), experimentally. In this theoretical work, the combined classical molecular dynamics (CMD) and density functional theory (DFT) calculations are performed to study the behavior of the bulk phase of these two TSILs in the vicinity of water (H2O) molecules with different concentrations. Initially, all the constructed systems are equilibrated using the CMD method. The final structures of the equilibrated systems are extracted for DFT calculations. Under CMD operation, the radial distribution function (RDF) plots and viscosity of TSILs are analyzed to understand the effect of water on TSILs. In the DFT regime, binding energy per H2O, charge transfer, charge density mapping, and electronic density of states (EDOS) analyses are done. The CMD results along with the DFT results are consolidated to support the hydrophilic and hydrophobic nature of the TSILs. Interestingly, we have found a strong correlation between the viscosity and the EDOS results that leads to an understanding of the hydration properties of the TSILs.
RESUMEN
A self-assembled lyotropic liquid crystal (LLC) system exhibiting dynamic and reversible polymorphism was developed using the synthetic cyclic ethynylhelicene oligomers cyclobis[(M)-D-n] (n = 4 and 6), in which two oligomer moieties are connected by two flexible linkers. The cyclic molecular structure was designed to control aggregation properties ranging from the molecular level to the macroscopic level. The cyclic oligomer changed its structure between random coils and an intramolecular homo-double helix induced by temperature and solvents. In the presence of pseudoenantiomeric acyclic oligomers, cyclobis[(M)-D-4] formed trimolecular complexes with a total molecular weight of over 10 000 Da containing two intermolecular hetero-double helices. The trimolecular complex formation predominated over bimolecular complex formation. The trimolecular complex self-assembled at high concentrations and formed LLCs composed of anisotropically aligned fibers. The result is in contrast to acyclic systems, which form gels composed of randomly oriented fibers. The LLCs changed into turbid gels composed of randomly oriented bundles upon cooling, and the LLCs were regenerated by heating. This is a notable example of a self-assembled LLC system exhibiting dynamic and reversible polymorphism between two ordered structures in a closed system consisting of fully synthetic molecules.
Asunto(s)
Compuestos Bicíclicos con Puentes/química , Cristales Líquidos/química , Compuestos Policíclicos/química , Estructura Molecular , Tamaño de la Partícula , Propiedades de Superficie , TermodinámicaRESUMEN
Direct imaging of the bulk heterojunction (BHJ) thin film morphology in polymer-based solar cells is essential to understand device function and optimize efficiency. The morphology of the BHJ active layer consists of bicontinuous domains of the donor and acceptor materials, having characteristic length scales of several tens of nanometers, that reduces charge recombination, enhances charge separation, and enables electron and hole transport to their respective electrodes. Direct imaging of the morphology from the molecular to macroscopic level, though, is lacking. Though transmission electron tomography provides a 3D, real-space image of the morphology, quantifying the structure is not possible. Here we used high-resolution atomic force microscopy (AFM) in the tapping and nanomechanical modes to investigate the BHJ active layer morphology that, when combined with Ar(+) etching, provided unique insights with unparalleled spatial resolution. PCBM was seen to form a network that interpenetrated into the fibrillar network of the hole-conducting polymer, both being imbedded in a mixture of the two components. The free surface was found to be enriched with polymer crystals having a "face-on" orientation and the morphology at the anode interface was markedly different.
RESUMEN
The novel synthesis of monodisperse magnetite Fe(3)O(4) nanoparticles of varying sizes using a solventless synthetic method was developed. Iron salt was treated in excess oleylamine and oleic acid as ligands. The effect of the reaction temperature and time on the particle size was investigated and the particle sizes were easily tuned from 5.3 to 20.4 nm by changing the reaction temperature and time.
Asunto(s)
Nanopartículas de Magnetita/química , Compuestos Férricos/química , Ligandos , Nanopartículas de Magnetita/ultraestructura , Tamaño de la Partícula , Temperatura , Factores de Tiempo , Difracción de Rayos XRESUMEN
In this study, the random dope of Mn into CdS nanoparticles in zincblende phase has been carried out under the mild reaction condition. The resulting nanoparticles were characterized by energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), X-ray diffractometer (XRD), UV-Vis spectrometer, PL spectrometer, and SQUID. EDX showed that the compositions of Mn doped CdS nanoparticles were readily controlled. TEM showed the particle sizes were not significantly affected by the compositions, retaining to be ca. 3 nm with a narrow size distribution. UV-Vis and PL spectra of the resulting nanoparticles showed the intra-Mn level may be affected by the quantum size effect. SQUID measurement showed that the resulting nanoparticles showed diamagnetism, paramagnetism and superparamagnetism dependent on Mn content.