Improving environmental risk management through historical impact assessments.

A historical contaminant impact assessment was conducted at 48 heavy manufacturing facilities located in 20 different states for a U.S.-based company. The facilities evaluated were industrial manufacturing sites that operated for as long as 100 yr and used several types of hazardous substances, including solvents and degreasers, oils and other petroleum products, paints and pigments, and heavy metals. The purpose of conducting the impact assessment was to provide direction and guidance on future environmental objectives and pollution prevention initiatives. The impact assessment involved examining historical investigative and remediation costs since 1985, types of contaminants, subsurface geology, hydrology, and regulatory requirements. The results reveled that 85% of the historical environmental costs were associated with hexavalent chromium and chlorinated solvents. Other contaminants, such as oils and other petroleum products and other heavy metals, were far more commonly detected but only accounted for the remaining 15% of costs. The results also indicated that the costs are also strongly associated with the type of geologic environment to which the chemicals were released. As a result of these findings, an aggressive pollution prevention program has been initiated to eliminate the use of those contaminants that are especially expensive to remediate and to develop stronger and more effective engineering controls at facilities located in sensitive ecological areas.

Heavy metals in an urban watershed in southeastern Michigan.

The occurrence of heavy metals in the soil was measured over a period of several years to determine background concentrations in a heavily urbanized watershed in southeastern Michigan. A spatially dispersed sample was collected to capture the inherent variability of the soils and historic land use. The analysis focused on 14 metals (antimony, arsenic, barium, beryllium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, thallium, and zinc) that are part of the USEPA's list of the 129 most common pollutants. Metal concentrations were measured at three depths: near-surface (<0.5 m), shallow subsurface (0.5-10 m), and depths greater than 10 m across six soil units in glacial terrain. Additional analyses assessed the metal concentrations in each depth profile across three general land use categories: residential, commercial, and industrial. Metal concentrations were the highest in the near-surface with Pb present at concentrations averaging 15.5 times that of background in industrial areas and approximately 16 times background in residential areas. Cadmium, Hg, and Zn were also present in surface soils at levels of several times that of background. The highest concentrations of each of these metals were present in the clay-rich soils located in the eastern, more urbanized and industrialized part of the watershed. Metals detected at elevated concentrations decreased in concentration with increasing depth and distance from the urbanized and industrialized center of the watershed. Statistically significant differences in the concentrations of heavy metals were also noted between the land use categories, with Cd, Cr, Cu, Pb, Ni, and Zn observed within industrial areas at mean concentrations several times greater than background levels.

Yeast metallothionein in transgenic tobacco promotes copper uptake from contaminated soils.

Metallothioneins (MTs) are metal-binding proteins that confer heavy metal tolerance and accumulation in yeast. To augment higher plant metal sequestration, the yeast metallothionein (CUP 1) was introduced into tobacco plants. The CUP 1 gene expression and copper and cadmium phytoextraction were determined. To confirm transformation, selfed and kanamycin-resistant third generation plants were subjected to DNA blot and polymerase chain reaction (PCR) analysis. A 4 mM CuSO(4) stress for 7 days resulted in a decline in CUP 1 transcripts versus nonstress conditions. Despite low mRNA levels, CUP 1 transformants accumulated up to seven times more copper in older versus younger leaves during copper stress. Pooled leaves of transgenic plants grown in soils from copper stamp-sands contained two to three times the copper content as that of the control plants. Unlike some previous reports featuring MT overexpression in plants, CUP 1 seedlings did not significantly sequester or demonstrate tolerance to CdCl(2). Using this transgenic approach, yeast CUP 1 expression under nonstressed conditions contributed to copper metal phytoextraction during a subsequent copper challenge. This strategy could be incorporated into plants designed for enhanced phytoremediation of metal contaminants.

Surface and subsurface geologic risk factors to ground water affecting brownfield redevelopment potential.

A model is created for assessing the redevelopment potential of brownfields. The model is derived from a space and time conceptual framework that identifies and measures the surface and subsurface risk factors present at brownfield sites. The model then combines these factors with a contamination extent multiplier at each site to create an index of redevelopment potential. Results from the application of the model within an urbanized watershed demonstrate clear differences between the redevelopment potential present within five different near-surface geologic units, with those units containing clay being less vulnerable to subsurface contamination. With and without the extent multiplier, the total risk present at the brownfield sites within all the geologic units is also strongly correlated to the actual costs of remediation. Thus, computing the total surface and subsurface risk within a watershed can help guide the remediation efforts at broad geographic scales, and prioritize the locations for redevelopment.