RESUMEN
Background: Dental caries is a prevalent oral health issue, often diagnosed through intraoral radiographs. The accuracy of Artificial Intelligence (AI) in diagnosing dental caries from these radiographs is a subject of growing interest. Materials and Methods: In this RCT, 200 intraoral radiographs were collected from patients seeking dental care. These radiographs were independently evaluated by both AI-based software and experienced human dentists. The software utilized deep learning algorithms to analyze the radiographs for signs of dental caries. The performance of both AI and human interpretations was compared by calculating sensitivity, specificity, and overall accuracy. Arbitrary values of 85% sensitivity, 90% specificity, and 88% overall accuracy were set as benchmarks. Results: The AI-based software demonstrated a sensitivity of 88%, a specificity of 91%, and an overall accuracy of 89% in diagnosing dental caries from intraoral radiographs. Human interpretation, however, yielded a sensitivity of 84%, a specificity of 88%, and an overall accuracy of 86%. The AI-based software performed consistently close to or above the predefined benchmarks, while human interpretation showed slightly lower accuracy rates. Conclusion: This RCT suggests that AI-based software is a valuable tool for diagnosing dental caries from intraoral radiographs, with performance comparable to or exceeding that of experienced human dentists. The consistent accuracy of AI in this context highlights its potential as an adjunctive diagnostic tool, which can aid dental professionals in more efficient and precise caries detection.
RESUMEN
Traumatic oral ulcers are one of the most commonly encountered oral ulcers. Their healing may be delayed due to factors like the presence of opportunistic infectious microbes in the oral cavity, secondary trauma from sharp edges of teeth, and the systemic condition of the patient. AIM: To compare the efficacy of a newly developed neem extract containing herbal ointments (propolis and Hemidesmus indicus) in enhancing the wound contraction of traumatic oral ulcers and to determine the relationship between oxidative stress and oral ulcers. METHOD: Ulcers were inflicted by trauma in the mouths of experimental rabbits using a 5 mm punch biopsy device. Forty-eight animals were randomly put into six groups (n = 12). Group 1 was the control group that did not receive any intervention; Group 2 had a systemic treatment of Hemidesmus indicus extract; Group 3 received a topical application of propolis; Group 4 had a topical application of a neem extract-based herbal ointment; Group 5 was administered a combination of Hemidesmus indicus and propolis; and Group 6 had a combination of a neem-based herbal ointment and Hemidesmus indicus. Oxidative stress levels were calculated by measuring superoxide dismutases and malondialdehyde levels in the blood on days 0, one, seven, and 14. Wound contraction scores of ulcers were also assessed on days seven and 14. RESULTS: Significantly higher wound contraction scores were seen in groups treated with herbal ointment in comparison to groups treated without herbal ointment. Oxidative stress levels increased in all groups after the infliction of ulcers (day one) and then declined as the ulcers healed, reaching near-normal levels on day 14. Groups containing Hemidesmus indicus showed a significant reduction in oxidative stress in comparison to groups without Hemidesmus indicus. A p-value of <0.05 was considered significant. CONCLUSION: A combined formulation of herbal ointment and Hemidesmus indicus proved to be the most efficacious in enhancing wound contraction of oral ulcers along with significantly reducing oxidative stress in experimental rabbits.
RESUMEN
It is of interest to examine the Marginal Bone Loss (MBL) around a single titanium implant that was immediately loaded and implanted in a healed or new extraction site in the maxilla over a period of five years. This study involved 36 participants (21 men and 15 women, with an average age of 31 years), all of whom needed to have a single implant placed in the front maxillae. The average marginal bone loss (MBL) in extraction sockets increased by 0.27±0.18 mm after a year, 0.26± 0.17 mm after three years, and 0.21 ±0.18 mm after five years. The mean change in MBL for the group of healed ridges was 0.27± 0.18 mm for one year, 0.22±0.18 mm for three years, and 0.21± 0.17mm for five years. Thus, implants loaded immediately and positioned in either healed ridges or extraction sockets had a similar effect on the local bone.
RESUMEN
Background and Objectives: The aim of this study was to see the incidence of cracks in root dentin after coronal flaring using various rotary instruments such as Gates Glidden (GG) drills, ProTaper Universal SX, OneFlare, and HyFlex EDM. Materials and Methods: Seventy freshly extracted premolar teeth with single canal were collected. All the teeth were randomly divided into five groups of fourteen each (n = 14), of which one group served as the control and the rest of the four groups were instrumented with GG drills, ProTaper Universal SX, OneFlare, and HyFlex EDM, respectively. Results: The GG drills resulted in a higher rate of crack formation in root dentin (P < 0.05) than the ProTaper Universal SX, OneFlare, and HyFlex EDM instruments (P > 0.05). Conclusion: The use of GG drills resulted in more crack formation. However, the results for the ProTaper Universal SX, OneFlare, and HyFlex EDM flaring instruments were less in terms of crack formation.
RESUMEN
Aim: This comprehensive review is aimed at evaluating the diagnostic and prognostic accuracy of artificial intelligence in endodontic dentistry. Introduction: Artificial intelligence (AI) is a relatively new technology that has widespread use in dentistry. The AI technologies have primarily been used in dentistry to diagnose dental diseases, plan treatment, make clinical decisions, and predict the prognosis. AI models like convolutional neural networks (CNN) and artificial neural networks (ANN) have been used in endodontics to study root canal system anatomy, determine working length measurements, detect periapical lesions and root fractures, predict the success of retreatment procedures, and predict the viability of dental pulp stem cells. Methodology. The literature was searched in electronic databases such as Google Scholar, Medline, PubMed, Embase, Web of Science, and Scopus, published over the last four decades (January 1980 to September 15, 2021) by using keywords such as artificial intelligence, machine learning, deep learning, application, endodontics, and dentistry. Results: The preliminary search yielded 2560 articles relevant enough to the paper's purpose. A total of 88 articles met the eligibility criteria. The majority of research on AI application in endodontics has concentrated on tracing apical foramen, verifying the working length, projection of periapical pathologies, root morphologies, and retreatment predictions and discovering the vertical root fractures. Conclusion: In endodontics, AI displayed accuracy in terms of diagnostic and prognostic evaluations. The use of AI can help enhance the treatment plan, which in turn can lead to an increase in the success rate of endodontic treatment outcomes. The AI is used extensively in endodontics and could help in clinical applications, such as detecting root fractures, periapical pathologies, determining working length, tracing apical foramen, the morphology of root, and disease prediction.
Asunto(s)
Inteligencia Artificial , Endodoncia , Fracturas Óseas , Humanos , Pronóstico , Tratamiento del Conducto Radicular/métodos , Resultado del TratamientoRESUMEN
OBJECTIVE: The contemporary esthetic restorative materials such as composite resin and glass-ionomer cements and their modifications have all been developed keeping in mind the requirements of permanent teeth. There have been plenty of studies that have focused on the characteristics of these materials in relation to permanent teeth with a relative dearth of such studies as regard to the primary teeth. The present study was undertaken to compare and evaluate the shear bond strength of composite resin, compomer, and resin-modified glass-ionomer cements in primary teeth. METHODS: Thirty non-carious primary molars that were indicated for extraction because of physiological resorption or, for orthodontic reasons, were selected. The selected teeth were randomly allocated to three groups of 10 each for composite, compomer, and resin-modified glass-ionomer cements. The enamel from the occlusal surface of all teeth was removed to expose the superficial dentin and was wet polished with 400 grit sand paper. Composite, compomer, and resin-modified glass-ionomer stubs were bonded on to the occlusal surfaces using a plastic tube as a template. All samples were, then, subjected to thermocycling and evaluation of shear bond strength using the universal testing machine at a cross-head speed of 0.5 mm/min, whereas the results obtained were subjected to statistical analysis. Statistical analysis was performed using Statistical Package for Social Sciences (SPSS) version 17.0 (SPSS Inc., Chicago, IL, USA), whereas one-way analysis of variance (ANOVA) and Tukey's multiple post-hoc procedures were used for statistical analysis. A P < 0.05 was considered statistically significant. RESULTS: The mean shear bond strength values for Groups I, II, and III were found to be 11.7 ± 3.07 MPa, 7.74 ± 4.16 Mpa, and 4.43 ± 2.08 Mpa, respectively, whereas one-way ANOVA and Tukey's multiple post-hoc procedures indicated that there were remarkable differences among the three groups with the results being statistically significant (P < 0.05). CONCLUSIONS: Composite resin showed the highest shear bond strength in relation to primary dentin when compared to compomer and resin-modified glass-ionomer cements.
RESUMEN
AIM: The aim of this current study was to compare and evaluate the reversal efficacy of Qmix and chitosan-based irrigation materials quantitatively through the assessment of the push-out bond strength of bioceramic sealer employing universal testing machine and to qualitatively analyze the sealer/dentin interface by scanning electron microscope (SEM) in the teeth subjected to fractioned radiation. MATERIALS AND METHODS: Ninety single-rooted straight human maxillary central incisors were randomly divided into six groups (n = 15) where in three groups comprise Chitosan, Qmix, and EDTA/sodium hypochlorite which were not exposed to irradiation while other three groups were challenged with irradiation protocols. Root canals were prepared with ProTaper universal system and all the samples were irrigated according to the final irrigation protocols and obturated with bioceramic sealers. Dentin slices were prepared with 1 mm thickness from each root third for the estimation of bond strength of sealers to dentin. Qualitative assessment of the sealer-dentin interface was done by scanning electron microscopy. Bond strength data were scrutinized by independent t-test and failure modes using the Chi-square test. RESULTS: Significantly lower bond strength (p <0.05) was recorded after irradiation compared with nonirradiated group. To quantify the results irrigation protocols, Qmix had highest bond strength followed by chitosan and EDTA/sodium hypochlorite group irrespective of irradiation status. Bond strength values reduced after irradiation in all root thirds irrespective of the irrigation materials. Scanning electron microscope images revealed traces of repair process for Qmix-based irrigation materials than the chitosan-based materials for both irradiated and nonirradiated specimens. CONCLUSION: All the irrigation materials employed in this study had good bond strength. The specimen irrigated with Qmix had comparatively higher bond strength than the chitosan-based materials. The teeth subjected to irradiation challenge were associated with a decrease in the push-out bond strength of sealers to intraradicular dentin with formation of more gaps and fewer tags at the sealer/dentin interface. CLINICAL SIGNIFICANCE: Selection of ideal irrigation protocols still remains a challenge for the clinical practitioners, and this study explored the utilization of novel materials used for irrigation, especially in the teeth subjected to radiation.
Asunto(s)
Quitosano , Hipoclorito de Sodio , Anodoncia , Ácido Edético , Humanos , Incisivo/anomalías , Microscopía Electrónica de Rastreo , Hipoclorito de Sodio/farmacologíaRESUMEN
AIM: The objective of this in vitro study was to assess the efficacy of novel propolis-based varnish against the two conventional varnishes on quantitative and qualitative assessments of occlusion of dentin tubules and resistance to erosive and abrasive wears employing scanning electron microscope (SEM). METHODS: Thirty human premolars free from caries extracted due to orthodontic reasons were included in the study. Experimental group was done based on treatment received and divided into three groups. Group A: ClinProXT Varnish (n = 10), Group B: MI Varnish (n = 10), and Group C: Propolis Varnish (n = 10) were applied. Teeth were cleaned and decoronation of crown was done with dentin disks. Dentin specimens of dimension 4 × 4 × 2 mm were prepared and subjected to finishing and polishing. The sample specimens were submersed in EDTA solution for a period of five minutes to open up the dentinal tubules. This was followed by treatment with varnishes and subjection to acidic-abrasive challenge. The specimens were analyzed with an image analyzer connected to SEM for the verification of the number of opened dentin tubules. The parameter assessed in SEM includes size, topography and surface characteristics of dentinal tubule were assessed. The obliteration potential of dentinal tubules was assessed with SEM images. Additionally, the dentin surface loss and resistance to acidic and abrasive wear were also evaluated with SEM. Data were analyzed with two-way analysis of variance (ANOVA) with post hoc Tukey's test. RESULTS: MI Varnish caused higher obliteration of dentin tubules followed by ClinproXT Varnish. Propolis Varnish showed the least obliteration of dentinal tubules among tested experimental groups. After acidic-abrasive challenge, Propolis Varnish was found to be more efficient with less material loss among the experimental groups tested. There was an insignificant difference among the MI Varnish and ClinProXT Varnish groups. CONCLUSION: Simulation of hypersensitive lesions mimicking the clinical scenario was a challenging task in this in vitro study. All varnishes tested in the study had good efficacy in the management of dentin hypersensitivity (DH). Propolis-based varnish had good resistance to material loss after subjection to acidic-abrasive challenge among the tested materials. The casein phosphopeptide (CPP)-amorphous calcium phosphate (ACP)-based MI Varnish had good efficacy to obliterate the dentinal tubules among the tested materials. It was prudent to select the varnishes with good long-term efficacy to survive in the clinical scenario which still remains a challenging task for the clinicians. CLINICAL SIGNIFICANCE: The stability of the varnish plays a vital role in maintenance of its long-term efficacy. The chemical nature along with the ability of the material to interact with the substrate plays a major role in management of DH.
Asunto(s)
Desensibilizantes Dentinarios , Sensibilidad de la Dentina , Própolis , Caseínas , Dentina , Desensibilizantes Dentinarios/uso terapéutico , Sensibilidad de la Dentina/tratamiento farmacológico , Electrones , Humanos , Microscopía Electrónica de RastreoRESUMEN
AIM AND OBJECTIVE: To compare and analyze the cyclic fatigue resistance of novel TruNatomy files against the conventionally used rotary files and reciprocating files in a simulated canal system with curvatures in the middle, apical portions root, and S-shaped canal employing scanning electron microscopy. MATERIALS AND METHODS: Endodontic files tested in the study include ProTaper, HyFlex EDM, Reciproc blue, and TruNatomy files operated in a simulated root canal system. A total of 96 files were employed in this study. They were categorized into four groups. Group 1 employed 24 TruNatomy files, group 2 employed 24 ProTaper gold files, group 3 employed 24 HyFlex EDM files, and group 4 employed 24 Reciproc blue files. All the groups employed eight files each under three subgroups namely A, B, and C representing middle, apical, and double curvatures, respectively. Artificial grooves were incorporated in the stainless steel blocks having three different curvatures. All the file systems were operated with a torque-controlled electric motor. The files were engaged in the artificial canal until the occurrence of fracture. The time required for the fracture was noted. Length of fractured tip was measured using the digital Vernier caliper. The number of cycles of failure (NCF) was calculated. The fractured parts were subjected to scanning electron microscope to analyze the mode of fracture. RESULTS: TruNatomy files had the highest mean NCF values of 588.01 in middle curvature, 1,321 in apical curvature, and 642.5 in S-shaped curvature HyFlex EDM and Reciproc blue file system exhibited comparable cyclic fatigue resistance among them. ProTaper gold file system exhibited least mean NCF values of 158.13 in the middle, 196.5 in the apical curvature, and 116.88 in the S-shaped canal system. Middle portion fractured first than the apical curvature. The mean length of fractured segments was found to be insignificant among the experimental study groups tested. CONCLUSION: All the file systems employed in the study had good cyclic fatigue resistance while TruNatomy files had the highest cyclic fatigue resistance while HyFlex EDM and Reciproc blue had comparable fatigue resistance. ProTaper gold file system had the least fatigue resistance at different radius of curvature in the simulated canal system in the apical and middle portions and S-shaped root canal. CLINICAL SIGNIFICANCE: The selection of file systems in cleaning and shaping protocols is an enigma to the endodontics. This in vitro study explored the selection protocols for the execution of root canal preparation. Heat treatment of nickel-titanium (NiTi) endodontic files had improved the cyclic fatigue résistance significantly enhancing the clinical life of file systems.
Asunto(s)
Instrumentos Dentales , Preparación del Conducto Radicular , Aleaciones Dentales , Falla de Equipo , Ensayo de MaterialesRESUMEN
AIM: This in vivo study was designed to compare the antimicrobial effect of toothpastes containing probiotics and neem on Streptococcus mutans in 18-30-year-old patients in Melmaruvathur population. MATERIALS AND METHODS: The study consisted of 60 patients who were randomly divided into two groups of 30 each. Group I received probiotic-based toothpaste (PerioBiotic), whereas Group II received neem-based toothpaste (Babool) as a preventive measure protocols to control the incidence and prevalence of dental caries. STUDY DESIGN PROTOCOLS: Participants were instructed to use the dentifrice selected for the study, two times a day for 60 days. Tests were performed on the saliva samples at the beginning of the study, 0 day, 15th day, 30th day, and 60th day following the use of toothpaste. The Statistical Package for the Social Sciences (SPSS-25) software, version, and Chi-square and one-way analysis of variance were used for data analysis. RESULTS: The toothpastes containing neem and probiotics as primary ingredients were efficient in reducing the number of bacterial count when comparing the baseline data with the 60 days data in both the groups as a therapeutic regimen. Intragroup values showed reduction in the number of bacterial count in both the groups in a gradual manner, whereas the intergroup values between the toothpaste showed no statistically significant difference in the bacterial count, and both toothpastes were efficient in reducing the bacterial count. CONCLUSION: This study reveals the influence of probiotics and neem on salivary S. mutans levels. The results revealed that neem-based and probiotic-based toothpaste, which were tested in this study, showed comparable antibacterial activity against the S. mutans. The neem-based toothpaste showed promising and good antimicrobial activity and reduced the level of bacterial count, which can be attributed to the presence of secondary metabolites, such as flavonoids, alkaloids, lectins, and polyphenols, as its active components. The effect of each component against the S. mutans needs to be quantified in further studies, and within the limitation of this short study, it can be considered as a better choice than commercially available toothpaste, which predominantly has chemicals as active ingredients, which in turn can compromise the safety aspects in the patients when used for controlling the dental caries for a longer duration.
RESUMEN
AIM AND OBJECTIVE: To compare the effectiveness of three irrigation systems, namely, Endovac system, Max I probe, and Navitip FX, in reduction of Enterococcus faecalis population from the root canal using agar diffusion method. MATERIALS AND METHODS: Sixty extracted intact human permanent maxillary anterior teeth were selected for this study. In group I, root canals were irrigated using brush covered 30-gauge NaviTipFX. Ultradent in group II root canals was irrigated using brush covered 30-gauge Max-I-Probe Dentsply. In group III, root canals were irrigated using Endoactivator, Dentsply. In group IV, root canal was irrigated by using the Endovac system Sybronendo. The steps followed in the study include preparation of specimen, contamination of the samples followed by conduction of testing procedures with implementation of appropriate irrigation protocols, and sampling procedures. RESULTS: Data were subjected to statistical analysis to interpret the significant differences among various irrigation systems. One-way analysis of variance, Post hoc Tukey tests were used for statistical analysis in the present study. Among the experimental groups, group IV showed statistically significant difference in reduction of E. faecalis. There were no statistical differences between them in reduction of E. faecalis in group I and group II compared and represented in Tables 1 and 2. CONCLUSION: All four irrigation delivery systems have been found to be effective in the reduction of E. faecalis. Endovac showed comparable efficacy in reduction of colony-forming units to that of other delivery systems used in the study. The result has to be validated with in vivo studies and clinical trials of larger sample size. CLINICAL SIGNIFICANCE: Selection of appropriate irrigation system capable of disinfection of canal complexities in apical third with less adverse effects is essential for good clinical success of endodontic treatment.
Asunto(s)
Cavidad Pulpar , Enterococcus faecalis , Humanos , Irrigantes del Conducto Radicular , Preparación del Conducto Radicular , Hipoclorito de Sodio , Irrigación TerapéuticaRESUMEN
AIM: The aim of this study was to evaluate the antifungal efficacy of a novel endodontic irrigant octenidine against conventional irrigants sodium hypochlorite and EDTA on Candida albicans growth in the young and old population by calculating the number of colonies formed and by qualitative identification of dead/viable fungi by Confocal laser scanning microscopy (CLSM) method. MATERIALS AND METHODS: The total number of samples used in the study was eighty samples after decoronation of the crown portion the middle third of root canal. Each group was subdivided into four subgroups with various irrigation protocols: (A) 17% EDTA + 5.25% NaOCl, (B) 100% Octenisept, (C) 17% EDTA + 5.25% NaOCl + 1% clotrimazole, and (D) phosphate buffer saline. After completion of irrigation ATCC samples (90028) of C. albicans were inoculated with 5 mL of peptone water each and incubated at 37°C for 72 hours to attain the turbidity corresponding to 0.5 McFarland standards CFU. Eight samples were analyzed for the formation of candidal colonies, and two samples for the assessment of viability of Candida by confocal laser scanning microscope in each subgroup. RESULTS: Comparison of antifungal efficacy of endodontic irrigants employed in the young and old populations revealed a significant reduction in the mean values of CFU and the mean values of percentage of non-viable microorganism by CLSM method. A positive relationship was revealed in the younger population which had a better antifungal efficacy than the older population in all the irrigant subgroups evaluated in the study. CONCLUSION: All the endodontic irrigants employed in our study had a good antifungal efficacy against Candida albicans. Octenisept had a maximum antifungal efficacy, while phosphate saline showed the least efficacy in both age groups, which was quantitatively evaluated by CFU method, and the same was confirmed through qualitative evaluation by CLSM method. CLINICAL SIGNIFICANCE: Candida albicans plays a major role in the establishment and pathogenesis of failed root canal treatment. Age-related changes alter the adhesion potential of dentin, in turn influence the outcome of endodontic therapy. Octenidine, a novel antifungal agent, can be substituted over the conventionally used EDTA and NaOCl with less adverse effects.
Asunto(s)
Antifúngicos , Irrigantes del Conducto Radicular , Antifúngicos/farmacología , Cavidad Pulpar , Ácido Edético , Enterococcus faecalis , Iminas , Rayos Láser , Piridinas , Irrigantes del Conducto Radicular/farmacología , Hipoclorito de Sodio/farmacologíaRESUMEN
AIM AND OBJECTIVE: The aim of this study was to evaluate the efficacy of novel antioxidant oregano against conventional antioxidants sodium ascorbate and green tea through comparison of the baseline weight percentage (wt%) of minerals prior to bleaching with values after bleaching protocols and antioxidant application by employing energy-dispersive X-ray spectroscopy analysis (EDAX). MATERIALS AND METHODS: Thirty noncarious, freshly extracted human permanent maxillary incisors without any visible defects were selected as samples. They were divided into three groups (n = 10) based on the antioxidant treatment received as follows: group I-10% sodium ascorbate solution, group II-10% green tea solution, and group III-5% oregano solution. 35% hydrogen peroxide was employed for bleaching. The wt% of teeth was calculated at three time intervals. The initial wt% was calculated prior to the bleaching procedure. The second one was calculated after subjecting to bleaching protocols, and final one was calculated after antioxidant treatment using EDAX. RESULTS: There was a statistically significant decrease in the calcium/phosphorus ratio for the bleached samples in comparison with the sound enamel. There was a comparable and significant increase in the calcium/phosphorus ratio values after application of the antioxidant with insignificant difference among the antioxidants evaluated in the study. CONCLUSION: Treatment with antioxidants helped in the reversal of mineral loss, which occurred due to the bleaching procedure while the efficacy of 10% oregano on reversal of the calcium and phosphorus ratio was found to comparable to that of 10% sodium ascorbate and green tea. CLINICAL SIGNIFICANCE: Application of antioxidants after bleaching reduced the time delay in performing the adhesive procedures without compromising their clinical efficacy.