Household herbicide use as a source of simazine contamination in urban surface waters.

Contamination of urban surface waters by herbicides is an increasing concern; however, sources of contamination are poorly understood, hindering the development of mitigation and regulatory strategies. Impervious surfaces, such as concrete in driveways and paths are considered an important facilitator for herbicide runoff to urban surface waters following applications by residential homeowners. This study assessed the transferability of a herbicide from concrete pavers treated with an off-the-shelf product, containing simazine as the active herbicide, marketed for residential homeowner application to impervious surfaces. Commercially available pavers were treated according to label directions and the effects of exposure time prior to irrigation, repeated irrigations, and dry time between irrigations on transferability of simazine to runoff were assessed. Simazine transferability was greatest when receiving an initial irrigation 1 h after application, with concentrations in runoff reduced by half when exposure times prior to the first irrigation were >2 days. Concentrations remained stable for repeated irrigations up to 320 days and exposures to outdoor conditions of 180 days prior to a first irrigation. Dry time between irrigations significantly influenced simazine transfer to runoff. Dry periods of 140 days resulted in approximately a 4-times increase in simazine transferability to runoff. These results suggest that herbicides used by homeowners, or any other users, on impervious surfaces are available to contaminate runoff for prolonged time periods following application at concentrations that may pose risks to aquatic life and for reuse of harvested runoff on parks and gardens. Regulators should consider the potential of hard surfaces to act as reservoirs for herbicides when developing policies and labelling products.

Towards Sustainable Environmental Quality: Priority Research Questions for the Australasian Region of Oceania.

Environmental challenges persist across the world, including the Australasian region of Oceania, where biodiversity hotspots and unique ecosystems such as the Great Barrier Reef are common. These systems are routinely affected by multiple stressors from anthropogenic activities, and increasingly influenced by global megatrends (e.g., the food-energy-water nexus, demographic transitions to cities) and climate change. Here we report priority research questions from the Global Horizon Scanning Project, which aimed to identify, prioritize, and advance environmental quality research needs from an Australasian perspective, within a global context. We employed a transparent and inclusive process of soliciting key questions from Australasian members of the Society of Environmental Toxicology and Chemistry. Following submission of 78 questions, 20 priority research questions were identified during an expert workshop in Nelson, New Zealand. These research questions covered a range of issues of global relevance, including research needed to more closely integrate ecotoxicology and ecology for the protection of ecosystems, increase flexibility for prioritizing chemical substances currently in commerce, understand the impacts of complex mixtures and multiple stressors, and define environmental quality and ecosystem integrity of temporary waters. Some questions have specific relevance to Australasia, particularly the uncertainties associated with using toxicity data from exotic species to protect unique indigenous species. Several related priority questions deal with the theme of how widely international ecotoxicological data and databases can be applied to regional ecosystems. Other timely questions, which focus on improving predictive chemistry and toxicology tools and techniques, will be important to answer several of the priority questions identified here. Another important question raised was how to protect local cultural and social values and maintain indigenous engagement during problem formulation and identification of ecosystem protection goals. Addressing these questions will be challenging, but doing so promises to advance environmental sustainability in Oceania and globally.

Impacts on the seagrass, Zostera nigricaulis, from the herbicide Fusilade Forte® used in the management of Spartina anglica infestations.

The herbicide Fusilade Forte® (FF) is widely applied in agricultural weed management and in the management of the invasive saltmarsh grass, Spartina anglica (ricegrass or cordgrass). FF (active ingredient fluazifop-P acid, FPA) is selective for poaceous grasses. Its primary mode of action is inhibition of the acetyl coenzyme-A carboxylase (ACCase) specific to this taxonomic group, and its secondary mode is by promotion of oxidative stress. FF is applied to S. anglica infestations in the intertidal zone, in proximity to seagrass meadows. Despite the potential for vital seagrass ecosystems to be exposed to FF, there is limited knowledge of any potential impacts. We investigated impacts of FPA on the endemic Australian seagrass, Zostera nigricaulis, measuring ACCase activity and parameters that reflect oxidative stress: photosynthetic performance, lipid peroxidation and photosynthetic pigment content. Seagrass was exposed to FF (0.01-10mgL-1 FPA and a control) for 7d, followed by a 7-d recovery in uncontaminated seawater. An enzyme assay demonstrated that FPA ≤10mgL-1 did not inhibit the activity of ACCase isolated from Z. nigricaulis, demonstrating that this seagrass is resistant to FF's primary mode of action. However, physiological impacts occurred following 7 days exposure to ≥0.1mgL-1 FPA, including up to a 72% reduction in photosynthetic pigment concentration. After 7-d recovery, photosynthetic pigment content improved in treatment plants; however, treated plants exhibited higher levels of lipid peroxidation. This study demonstrates that while Z. nigricaulis is resistant to FF's primary mode of action, significant physiological impacts occur following 7 days exposure to ≥0.1mgL-1 FPA. This study provides valuable information on the effects of FF on a non-target species that can better inform approaches to Spartina management in coastal seagrass ecosystems.

Herbicides and trace metals in urban waters in Melbourne, Australia (2011-12): concentrations and potential impact.

Urban stormwater samples were collected from five aquatic systems in Melbourne, Australia, on six occasions between October 2011 and March 2012 and tested for 30 herbicides and 14 trace metals. Nineteen different herbicides were observed in one or more water samples from the five sites; chemicals observed at more than 40% of sites were simazine (100%), MCPA (83%), diuron (63%) and atrazine (53%). Using the toxicity unit (TU) concept to assess potential risk to aquatic ecosystems, none of the detected herbicides were considered to pose an individual, group or collective short-term risk to fish or zooplankton in the waters studied. However, 13 herbicides had TU values suggesting they might have posed an individual risk to primary producers at the time of sampling. Water quality guideline levels were exceeded on many occasions for Cd, Cu, Cr, Pb and Zn. Similarly, RQmed and RQmax exceeded 1 for Cd, Cr, Cu, Mn, Ni, Pb, V and Zn. Almost all the metals screened exceeded a log10TU of -3 for every trophic level, suggesting that there may have been some impact on aquatic organisms in the studied waterbodies. Our data indicate that Melbourne's urban aquatic environments may be being impacted by approved domestic, industrial and sporting application of herbicides and that stormwater quality needs to be carefully assessed prior to reuse. Further research is required to understand the performance of different urban stormwater wetland designs in removing pesticides and trace metals. Applying the precautionary principle to herbicide regulation is important to ensure there is more research and assessment of the long-term 'performance' standard of all herbicides and throughout their 'life cycle'. Implementing such an approach will also ensure government, regulators, decision makers, researchers, policy makers and industry have the best possible information available to improve the management of chemicals, from manufacture to use.

Municipal wastewater effluent licensing: A global perspective and recommendations for best practice.

Advances in wastewater treatment have greatly improved the quality of municipal wastewater effluents in many parts of the world, but despite this, treated wastewaters can still pose a risk to the environment. Licensing plays a crucial role in the regulation of municipal wastewater effluents by setting standards or limits designed to protect the economic, environmental and societal values of waterbodies. Traditionally these standards have focused on physical and chemical water quality parameters within the discharge itself, however these approaches do not adequately account for emerging contaminants, potential effects of chemical mixtures, or variations in the sensitivity and resilience of receiving environments. In this review we focus on a number of industrialised countries and their approach to licensing. We consider how we can ensure licensing is effective, particularly when considering the rapid changes in our understanding of the impacts of discharges, the technical advances in our ability to detect chemicals at low concentrations and the progress in wastewater treatment technology. In order to meet the challenges required to protect the values of our waterways, licensing of effluents will need to ensure that there is no disconnect between the core values to be protected and the monitoring system designed to scrutinise performance of the WWTP. In many cases this may mean an expansion in the monitoring approaches used for both the effluent itself and the receiving waterbody.

Altered reproductive behaviours in male mosquitofish living downstream from a sewage treatment plant.

Freshwater environments are common repositories for the discharge of large volumes of domestic and industrial waste, particularly through wastewater effluent. One common group of chemical pollutants present in wastewater are endocrine disrupting chemicals (EDCs), which can induce morphological and behavioural changes in aquatic organisms. The aim of this study was to compare the reproductive behaviour and morphology of a freshwater fish, the mosquitofish (Gambusia holbrooki), collected from two sites (wastewater treatment plant (WWTP) and a putative pristine site). The mosquitofish is a sexually dimorphic livebearer with a coercive mating system. Males inseminate females using their modified anal fin as an intromittent organ. Despite this, females are able to exert some control over the success of male mating attempts by selectively associating with, or avoiding, certain males over others. Using standard laboratory assays of reproductive behaviour, we found that mosquitofish males living in close proximity to WWTP showed increased mating activity compared to those inhabiting a pristine site. More specifically, during behavioural trials in which males were allowed to interact with females separated by a transparent divider, we found that WWTP-males spent more time associating with females. Concordant with this, when males and females were subsequently allowed to interact freely, WWTP-males also spent more time chasing and orienting towards the females. As a result, females from both sites showed more interest towards the WWTP-site males. Male anal fin morphology, however, did not differ between sites. Our study illustrates that lifetime exposure to WWTP-effluents can greatly affect male behaviour. The results underscore the importance of behaviour as a potential tool for investigating unknown contaminants in the environment.

Environmental fate of fungicides in surface waters of a horticultural-production catchment in southeastern Australia.

Fungicides are regularly applied in horticultural production systems and may migrate off-site, potentially posing an ecological risk to surface waterways. However, few studies have investigated the fate of fungicides in horticultural catchments. This study investigated the presence of 24 fungicides at 18 sites during a 5-month period within a horticultural catchment in southeastern Australia. Seventeen of the 24 fungicides were detected in the waterways, with fungicides detected in 63% of spot water samples, 44% of surface sediment samples, and 44% of the passive sampler systems deployed. One third of the water samples contained residues of two or more fungicides. Myclobutanil, trifloxystrobin, pyrimethanil, difenoconazole, and metalaxyl were the fungicides most frequently detected, being present in 16-38% of the spot water samples. Iprodione, myclobutanil, pyrimethanil, cyproconazole, trifloxystrobin, and fenarimol were found at the highest concentrations in the water samples (> 0.2 µg/l). Relatively high concentrations of myclobutanil and pyrimethanil (≥ 120 µg/kg dry weight) were detected in the sediment samples. Generally the concentrations of the fungicides detected were several orders of magnitude lower than reported ecotoxicological effect values, suggesting that concentrations of individual fungicides in the catchment were unlikely to pose an ecological risk. However, there is little information on the effects of fungicides, especially fungi and microbes, on aquatic ecosystems. There is also little known about the combined effects of simultaneous low-level exposure of multiple fungicides to aquatic organisms. Further research is required to adequately assess the risk of fungicides in aquatic environments.

Evaluation of the Hormosira banksii (Turner) desicaine germination and growth inhibition bioassay for use as a regulatory assay.

A germination and growth inhibition bioassay using the marine macroalga, Hormosira banksii, was evaluated for use as a standard method for direct toxicity assessment testing in the Australasian region. H. banksii is the dominant macroalga and an important primary producer in temperate coastal zones of Australasia and is therefore relevant as a test organism. Moreover, it releases gametes readily under laboratory conditions, therefore allowing tests to be conducted year round. The test endpoints' variability and sensitivity was evaluated using ammonia, a common constituent of waste waters. The two test endpoints of germination and growth proved to be both reliable and repeatable bioassay endpoints. The coefficients of variation (CV's) for toxicity to germination and growth by ammonia ranged from 25% to 38% (n=18).

Effects of antifouling biocides to the germination and growth of the marine macroalga, Hormosira banksii (Turner) Desicaine.

The International Maritime Organisation's (IMO) ban on the use of tributyltin in antifouling paints has inevitability increased the use of old fashioned antifoulants and/or the development of new paints containing 'booster biocides'. These newer paints are intended to be environmentally less harmful, however the broader environmental effects of these 'booster biocides' are poorly known. Germination and growth inhibition tests using the marine macroalga, Hormosira banksii (Turner) Desicaine were conducted to evaluate the toxicity of four new antifouling biocides in relation to tributyltin-oxide (TBTO). Each of the biocides significantly inhibited germination and growth of Hormosira banksii spores. Toxicity was in increasing order: diuron < zineb < seanine 211< zinc pyrithione < TBTO. However, the lack of knowledge on partitioning in the environment makes it difficult to make a full assessment on whether the four biocides tested offer an advantage over organotin paints in terms of environmental impact.

Assessing the performance of Hormosira banksii (Turner) Desicaine germination and growth assay using four reference toxicants.

This study evaluated the performance of a Hormosira banksii germination inhibition bioassay developed to assess the toxicity of single compounds and complex effluents in the Australasian region. The reproducibility of 48 and 72 h germination and growth toxicity tests was determined using four reference toxicants, namely, ammonia, copper, phenol and zinc. H. banksii spore germination and growth was significantly inhibited following exposure to each of the toxicants. H. banskii spores were most sensitive to ammonia and showed decreasing sensitivity to copper, zinc and phenol. The EC50 values ranged from 0.07 to 0.08 mg L(-1) for ammonia, 0.09 to 0.22 mg L(-1) for copper, 36 to 1068 mg L(-1) for phenol and 19 to 23 mg L(-1) for zinc. Variability of the test method ranged from 14% to 144% and was comparable to that observed for commonly employed bioassays against appropriate reference toxicants.