Tuning Interfacial Chemistry to Direct the Electrosynthesis of Metal Oxide Semiconductors.

ConspectusMetal oxide semiconductors have many features that make them attractive for both fundamental and applied studies. For example, these compounds contain elements (e.g., Fe, Cu, Ti, etc.) that are derived from minerals rendering them earth-abundant and, most often, are also not toxic. Therefore, they have been examined for possible applicability in a very diverse range of technological applications including photovoltaic solar cells, charge storage devices, displays, smart windows, touch screens, etc. The fact that metal oxide semiconductors have both n- and p-type conductivity makes them amenable for use as hetero- or homojunctions in microelectronic devices and as photoelectrodes in solar water-splitting devices. This Account presents a review of collaborative research on the electrosynthesis of metal oxides from our respective groups against the backdrop of key developments on this topic. The many variants that interfacial chemical modification schemes offer are shown herein to lead to the targeted synthesis of a wide array of not only simple binary metal oxides but also more complex chemistries involving multinary compound semiconductors and alloys.This Account presents our perspective on how parallel developments in the understanding of and ability to manipulate electrode-electrolyte interfaces have correspondingly enabled the innovation of a broad array of electrosynthetic strategies. These coupled with the advent of versatile tools to probe interfacial processes (undoubtedly, a child of the nanotechnology "revolution") afford an operando examination of how effective the strategies are to secure the targeted metal oxide product as well as the mechanistic nuances. Flow electrosynthesis, for example, removes many of the complications accruing from the accumulation of interfering side products─veritably, this is an Achilles heel of the electrosynthesis approach. Coupling flow electrosynthesis with downstream analysis tools based on spectroscopic or electroanalytical probes opens up the possibility of immediate process feedback and optimization. The combination of electrosynthesis, stripping voltammetry, and electrochemical quartz crystal nanogravimetry (EQCN), either in a static or in a dynamic (flow) platform, is shown below to offer intriguing possibilities for metal oxide electrosynthesis. While many of the examples below are based on our current and recent research and in other laboratories, unlocking even more potential will hinge on future refinements and innovations that surely are around the corner.

Electrodeposition of Silver Vanadate Films: A Tale of Two Polymorphs.

Two polymorphs of AgVO3 , namely the α- and ß- forms, were prepared and their physical, structural, optical, electrochemical, and photoelectrochemical characteristics were compared using a battery of experimental and theoretical tools. A two-step method, previously developed in the our laboratory for the electrodeposition of inorganic semiconductor films, was applied to the electrosynthesis of silver vanadate (AgVO3 ) films on transparent, conducting oxide surfaces. In the first step, silver was cathodically deposited from a non-aqueous bath containing silver nitrate. In the second step, the silver film was anodically stripped in an aqueous medium containing ammonium metavanadate. The anodically generated silver ions at the interface underwent a precipitation reaction with the vanadate species to generate the desired product in situ. Each of these steps were mechanistically corroborated via the use of electrochemical quartz crystal microgravimetry, used in conjunction with voltammetry and coulometry. As-deposited films were crystalline and showed p-type semiconductor behavior. Theoretical insights are provided for the electronic origin of the αâ†’ß phase transformation in AgVO3 and the disparate optical band gaps of the two polymorphs. Finally, implications for the application of this material in solar cells are provided.

Synthesis of Au-BiVO4 nanocomposite through anodic electrodeposition followed by galvanic replacement and its application to the photocatalytic decomposition of methyl orange.

A Au-BiVO(4) nanocomposite is synthesized by a two-step strategy involving anodic electrodeposition combined with in situ galvanic replacement. First, a BiVO(4) layer is prepared by the anodic oxidation of pre-electrodeposited Bi film in a VO(4)(3-) containing electrolyte. Thus-prepared BiVO(4) film contains excess metallic Bi, which is then galvanically replaced with Au from an aqueous HAuCl(4) solution, resulting in the Au-BiVO(4) composite in the second step. Optical, photoelectrochemical and photocatalytic properties are investigated by using X-ray diffraction, energy-dispersive X-ray analysis, diffuse reflectance spectrometry, and photoelectrochemical analyses. The visible-light photocatalytic activity of the Au-BiVO(4) composite is evaluated using the decomposition of methyl orange dye and is superior to the bare BiVO(4) film counterpart.

Compositional analysis of electrodeposited bismuth telluride thermoelectric thin films using combined electrochemical quartz crystal microgravimetry--stripping voltammetry.

Bismuth telluride (Bi 2Te 3 ) is a benchmark material for thermoelectric power generation and cooling applications. Electrodeposition is a versatile technique for preparing thin films of this material; however, it affords films of variable composition depending on the preparation history. A simple and rapid assay of electrodeposited films, therefore, has both fundamental and practical importance. In this study, a new protocol for the electroanalysis of Bi 2Te 3 thin films is presented by combining the two powerful and complementary techniques of electrochemical quartz crystal microgravimetry (EQCM) and stripping voltammetry. First, any free (and excess) tellurium in the electrodeposited film was reduced to soluble Te ( 2- ) species by scanning to negative potentials in a 0.1 M Na 2SO 4 electrolyte, and the accompanying frequency increase (mass loss) was used to determine the content of free tellurium. The film was again subjected to cathodic stripping in the same medium (to generate Bi (0) and soluble Te (2-) from the Bi 2 Te 3 film component of interest), and the EQCM frequency change was used to determine the content of chemically bound Te in the Bi 2Te 3 thin film and thereby the compound stoichiometry. Finally, the EQCM frequency change during Bi oxidation to Bi (3+) and the difference between total Bi and Bi in Bi 2Te 3 resulted in the assay of free (excess) Bi in the electrodeposited film. Problems associated with the chemical/electrochemical stability of the free Bi species were circumvented by a flow electroanalysis approach. Data are also presented on the sensitivity of electrodeposited Bi 2Te 3 film composition to the electrodeposition potential. This newly developed method can be used for the compositional analysis of other thermoelectric thin-film material candidates in general.